Damage of a large-scale reinforced concrete wall caused by an explosively formed projectile(EFP)

To quickly break through a reinforced concrete wall and meet the damage range requirements of rescuers entering the building,the combined damage characteristics of the reinforced concrete wall caused by EFP penetration and explosion shock wave were studied.Based on LS-DYNA finite element software and RHT model with modified parameters,a 3D large-scale numerical model was established for simulation analysis,and the rationality of the material model parameters and numerical simulation algorithm were verified.On this basis,the combined damage effect of EFP penetration and explosion shock wave on reinforced concrete wall was studied,the effect of steel bars on the penetration of EFP was highlighted,and the effect of impact positions on the damage of the reinforced concrete wall was also examined.The results reveal that the designed shaped charge can form a crater with a large diameter and high depth on the reinforced concrete wall.The average crater diameter is greater than 67 cm(5.58 times of charge diameter),and crater depth is greater than 22 cm(1.83 times of charge diameter).The failure of the reinforced concrete wall is mainly caused by EFP penetration.When only EFP penetration is considered,the average diameter and depth of the crater are 54.0 cm(4.50 times of charge diameter)and 23.7 cm(1.98 times of charge diameter),respectively.The effect of explosion shock wave on crater depth is not significant,resulting in a slight increase in crater depth.The average crater depth is 24.5 cm(2.04 times of charge diameter)when the explosion shock wave is considered.The effect of explosion shock wave on the crater diameter is obvious,which can aggravate the damage range of the crater,and the effect gradually decreases with the increase of standoff distance.Compared with the results for a plain concrete wall,the crater diameter and crater depth of the reinforced concrete wall are reduced by 5.94%and 9.96%,respectively.Compared to the case in which the steel bar is not hit,when the EFP hit one steel bar and the intersection of two steel bars,the crater diameter decreases by 1.36%and 5.45%respectively,the crater depth decreases by 4.92%and 14.02%respectively.The EFP will be split by steel bar during the penetration process,resulting in an irregular trajectory.

Explosive Ferroelectric Power Supply of Flux Compression Generator

Useful electrical pulses of a few hundred kilowatts lasting for several microseconds can be obtained by the depolarization process of PZT95/5 ferroelectric ceramics. In this paper, taking account of the dielectric relaxation, and finite resistance, a new mathematical model of PZT95/5 ferroelectric ceramics subjected to normal-mode shock wave is suggested. Explosive shock wave techniques have also been used to investigate the response of PZT95/5 ferroelectric ceramics with inductive loads in experiments. The predictions from the model have a good agreement with observed results. In addition, an explosive ferroelectric generator composed of explosive shock wave generators, electric units, and additional capacitors is design to power small-size helical flux compression generators. The test results with the maximal output energy of up to 80 J are given and experimental results are also considered.

Large-scale high performance computation on 3D explosion and shockproblems

Explosion and shock often involve large deformation, interface treatment between multi-material, and strong discontinuity. The Eulerian method has advantages for solving these problems. In parallel computation of the Eulerian method, the physical quantities of the computaional cells do not change before the disturbance reaches to these cells. Computational efficiency is low when using fixed partition because of load imbalance. To solve this problem, a dynamic parallel method in which the computation domain expands with disturbance is used. The dynamic parallel program is designed based on the generally used message passing interface model. The numerical test of dynamic parallel program agrees well with that of the original parallel program, also agrees with the actual situation.

Shock tubes and blast injury modeling

Explosive blast injury has become the most prevalent injury in recent military conflicts and terrorist attacks. The magnitude of this kind of polytrauma is complex due to the basic physics of blast and the surrounding environments. Therefore, development of stable, reproducible and controllable animal model using an ideal blast simulation device is the key of blast injury research. The present review addresses the modeling of blast injury and applications of shock tubes.