Ionospheric delay error is considered to be one of the most prominent factors impacting the Global Navigation Satellite Systems(GNSS) positioning and navigation accuracies. Due to dispersive nature and anisotropic of ...Ionospheric delay error is considered to be one of the most prominent factors impacting the Global Navigation Satellite Systems(GNSS) positioning and navigation accuracies. Due to dispersive nature and anisotropic of the ionosphere above certain regions, the positioning accuracy is seriously affected when using a precision-limited model. In this paper, an attempt has been taken to estimate ionosphere-delays based on Planar Fit(PF) and Spherical Harmonic Function(SHF) models by applying the commonly used single layer Model(SLM) and an extended single layer model(ESLM) which has been explored sparsely over the region. The results show that ESLM of PF and SHF techniques performed better in estimating ionospheric delay compared to the existing SLM model. Although the performance of the ESLM approach is almost comparable to the SLM results during the quiet ionospheric conditions, the ESLM-PF and ESLMSHF models led to respective improvements of 4.66% and 7.14% over the classically used SLM model under the disturbed ionospheric conditions. In view of the uneven variability of equatorial/low latitude ionosphere above the Indian subcontinental region, the suitability of ESLM-PF and ESLM-SHF models has been emphasized and suggested for assessing its completeness and reliableness across other parts of the globe. The output of this work may be useful for high precession GNSS positioning through mitigating the ionospheric delays under quiet as well as varied ionospheric conditions across the low/equatorial latitude regions.展开更多
In this work, an extended Jacobian elliptic function expansion method is proposed for constructing the exact solutions of nonlinear evolution equations. The validity and reliability of the method are tested by its app...In this work, an extended Jacobian elliptic function expansion method is proposed for constructing the exact solutions of nonlinear evolution equations. The validity and reliability of the method are tested by its applications to Dynamical system in a new Double-Chain Model of DNA and a diffusive predator-prey system which play an important role in biology.展开更多
CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. There...CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs（AAG） is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System（FSMARS）, is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.展开更多
摩擦力是影响直线伺服系统低速运行与点对点定位精度的主要非线性扰动。广义麦克斯韦(generalized Maxwellslip,GMS)摩擦模型虽然可以准确描述摩擦特性用于前馈补偿,但其存在切换点过渡时振荡的问题,同时易受测量噪声和摩擦参数变化等...摩擦力是影响直线伺服系统低速运行与点对点定位精度的主要非线性扰动。广义麦克斯韦(generalized Maxwellslip,GMS)摩擦模型虽然可以准确描述摩擦特性用于前馈补偿,但其存在切换点过渡时振荡的问题,同时易受测量噪声和摩擦参数变化等影响。为此,该文提出基于平滑GMS模型和改进扩张状态观测器(extended state observer,ESO)的复合摩擦补偿策略。首先,引入过渡用双曲正切函数以解决GMS模型中在切换点的反复穿越问题,并给出该模型的离线辨识方法。其次,设计基于模型信息的四阶ESO补偿剩余摩擦力与未知扰动,并引入切比雪夫滤波器整定观测器增益,以降低扰动观测与噪声敏感之间的冲突。为验证所提摩擦补偿策略的有效性,在小型高精度永磁同步直线电机定位平台上进行定位实验。实验结果验证了所提摩擦补偿策略的可行性和有效性。展开更多
文摘Ionospheric delay error is considered to be one of the most prominent factors impacting the Global Navigation Satellite Systems(GNSS) positioning and navigation accuracies. Due to dispersive nature and anisotropic of the ionosphere above certain regions, the positioning accuracy is seriously affected when using a precision-limited model. In this paper, an attempt has been taken to estimate ionosphere-delays based on Planar Fit(PF) and Spherical Harmonic Function(SHF) models by applying the commonly used single layer Model(SLM) and an extended single layer model(ESLM) which has been explored sparsely over the region. The results show that ESLM of PF and SHF techniques performed better in estimating ionospheric delay compared to the existing SLM model. Although the performance of the ESLM approach is almost comparable to the SLM results during the quiet ionospheric conditions, the ESLM-PF and ESLMSHF models led to respective improvements of 4.66% and 7.14% over the classically used SLM model under the disturbed ionospheric conditions. In view of the uneven variability of equatorial/low latitude ionosphere above the Indian subcontinental region, the suitability of ESLM-PF and ESLM-SHF models has been emphasized and suggested for assessing its completeness and reliableness across other parts of the globe. The output of this work may be useful for high precession GNSS positioning through mitigating the ionospheric delays under quiet as well as varied ionospheric conditions across the low/equatorial latitude regions.
文摘In this work, an extended Jacobian elliptic function expansion method is proposed for constructing the exact solutions of nonlinear evolution equations. The validity and reliability of the method are tested by its applications to Dynamical system in a new Double-Chain Model of DNA and a diffusive predator-prey system which play an important role in biology.
基金Supported by National Natural Science Foundation of China (Grant No.51175287)National Science and Technology Major Project of China (Grant No.2011ZX02403)
文摘CAD model retrieval based on functional semantics is more significant than content-based 3D model retrieval during the mechanical conceptual design phase. However, relevant research is still not fully discussed. Therefore, a functional semantic-based CAD model annotation and retrieval method is proposed to support mechanical conceptual design and design reuse, inspire designer creativity through existing CAD models, shorten design cycle, and reduce costs. Firstly, the CAD model functional semantic ontology is constructed to formally represent the functional semantics of CAD models and describe the mechanical conceptual design space comprehensively and consistently. Secondly, an approach to represent CAD models as attributed adjacency graphs（AAG） is proposed. In this method, the geometry and topology data are extracted from STEP models. On the basis of AAG, the functional semantics of CAD models are annotated semi-automatically by matching CAD models that contain the partial features of which functional semantics have been annotated manually, thereby constructing CAD Model Repository that supports model retrieval based on functional semantics. Thirdly, a CAD model retrieval algorithm that supports multi-function extended retrieval is proposed to explore more potential creative design knowledge in the semantic level. Finally, a prototype system, called Functional Semantic-based CAD Model Annotation and Retrieval System（FSMARS）, is implemented. A case demonstrates that FSMARS can successfully botain multiple potential CAD models that conform to the desired function. The proposed research addresses actual needs and presents a new way to acquire CAD models in the mechanical conceptual design phase.
文摘摩擦力是影响直线伺服系统低速运行与点对点定位精度的主要非线性扰动。广义麦克斯韦(generalized Maxwellslip,GMS)摩擦模型虽然可以准确描述摩擦特性用于前馈补偿,但其存在切换点过渡时振荡的问题,同时易受测量噪声和摩擦参数变化等影响。为此,该文提出基于平滑GMS模型和改进扩张状态观测器(extended state observer,ESO)的复合摩擦补偿策略。首先,引入过渡用双曲正切函数以解决GMS模型中在切换点的反复穿越问题,并给出该模型的离线辨识方法。其次,设计基于模型信息的四阶ESO补偿剩余摩擦力与未知扰动,并引入切比雪夫滤波器整定观测器增益,以降低扰动观测与噪声敏感之间的冲突。为验证所提摩擦补偿策略的有效性,在小型高精度永磁同步直线电机定位平台上进行定位实验。实验结果验证了所提摩擦补偿策略的可行性和有效性。
基金This work was supported by the National Natural Science Foundation of China （51507015, 61773402, 61540037, 71271215, 61233008, 51425701, 70921001, 51577014）, the Natural Science Foundation of Hunan Province （2015JJ3008）, the Key Laboratory of Renewable Energy Electric-Technology of Hunan Province （2014ZNDL002）, and Hunan Province Science and Technology Program（2015NK3035）.
