2-Hexyl-1-decanol was used as the main material to prepare a block-polyether sulfonate extended surfactant(IC_(16)P_(6)E_(6)S).The solubility and surface active properties of IC_(16)P_(6)E_(6)S were evaluated,and then...2-Hexyl-1-decanol was used as the main material to prepare a block-polyether sulfonate extended surfactant(IC_(16)P_(6)E_(6)S).The solubility and surface active properties of IC_(16)P_(6)E_(6)S were evaluated,and then the IC_(16)P_(6)E_(6)S was mixed with a cationic surfactant hexadecyl trimethyl ammonium bromide(CTAB)and a zwitterionic betaine surfactant(HAB),respectively.The effects of mixing ratios of IC_(16)P_(6)E_(6)S∶HAB and IC_(16)P_(6)E_(6)S∶CTAB on the hydrodynamic diameter and interfacial properties were discussed.The emulsification,adsorption and laboratory core displacement experiments of the binary system were tested.The results showed that the critical micelle concentration(cmc)of IC_(16)P_(6)E_(6)S in distilled water was 0.1 mmol/L and the surface tension at cmc(γcmc)was 28.53 mN/m.IC_(16)P_(6)E_(6)S showed strong synergistic effects with HAB and CTAB,and the mixed systems could effectively reduce the interfacial tension compared with single surfactants.The mixed systems with n(IC_(16)P_(6)E_(6)S)∶n(HAB)of 1∶1 and n(IC_(16)P_(6)E_(6)S)∶n(CTAB)of 1∶3 could maintain ultra-low interfacial tension(in the order of magnitude of 10^(-3)mN/m)in the salinity range of 1%-7%NaCl and low interfacial tension(in the order of magnitude of 10^(-2)mN/m)in the salinity range of 3%-7%NaCl,respectively.With the increase of salinity,the emulsion formed by the mixed surfactant system underwent the phase transition process from WinsorⅠto WinsorⅢand then to WinsorⅡ.The emulsion of mixed IC_(16)P_(6)E_(6)S/HAB system had more middle-phase emulsion volume than that of the mixed IC_(16)P_(6)E_(6)S/CTAB system,and the former emulsion system was more stable.The mixed IC_(16)P_(6)E_(6)S/HAB system also had good solubilization effect,and the amount of oil solubilization was up to 43 mL/g.Meanwhile,it had good adsorption resistance.Compared with water flooding,the depressurization rate could reach 25.00%and the recovery could be enhanced by 11.75%,indicating that the IC_(16)P_(6)E_(6)S/HAB system was more conducive to the depressurization and injection enhancement for low-permeability reservoirs.展开更多
文摘2-Hexyl-1-decanol was used as the main material to prepare a block-polyether sulfonate extended surfactant(IC_(16)P_(6)E_(6)S).The solubility and surface active properties of IC_(16)P_(6)E_(6)S were evaluated,and then the IC_(16)P_(6)E_(6)S was mixed with a cationic surfactant hexadecyl trimethyl ammonium bromide(CTAB)and a zwitterionic betaine surfactant(HAB),respectively.The effects of mixing ratios of IC_(16)P_(6)E_(6)S∶HAB and IC_(16)P_(6)E_(6)S∶CTAB on the hydrodynamic diameter and interfacial properties were discussed.The emulsification,adsorption and laboratory core displacement experiments of the binary system were tested.The results showed that the critical micelle concentration(cmc)of IC_(16)P_(6)E_(6)S in distilled water was 0.1 mmol/L and the surface tension at cmc(γcmc)was 28.53 mN/m.IC_(16)P_(6)E_(6)S showed strong synergistic effects with HAB and CTAB,and the mixed systems could effectively reduce the interfacial tension compared with single surfactants.The mixed systems with n(IC_(16)P_(6)E_(6)S)∶n(HAB)of 1∶1 and n(IC_(16)P_(6)E_(6)S)∶n(CTAB)of 1∶3 could maintain ultra-low interfacial tension(in the order of magnitude of 10^(-3)mN/m)in the salinity range of 1%-7%NaCl and low interfacial tension(in the order of magnitude of 10^(-2)mN/m)in the salinity range of 3%-7%NaCl,respectively.With the increase of salinity,the emulsion formed by the mixed surfactant system underwent the phase transition process from WinsorⅠto WinsorⅢand then to WinsorⅡ.The emulsion of mixed IC_(16)P_(6)E_(6)S/HAB system had more middle-phase emulsion volume than that of the mixed IC_(16)P_(6)E_(6)S/CTAB system,and the former emulsion system was more stable.The mixed IC_(16)P_(6)E_(6)S/HAB system also had good solubilization effect,and the amount of oil solubilization was up to 43 mL/g.Meanwhile,it had good adsorption resistance.Compared with water flooding,the depressurization rate could reach 25.00%and the recovery could be enhanced by 11.75%,indicating that the IC_(16)P_(6)E_(6)S/HAB system was more conducive to the depressurization and injection enhancement for low-permeability reservoirs.
