The present-day tectonic activities on the northeastern margin of the Pamir Plateau are mainly E-W oriented extensions, among which the Kongur Extensional System(KES) plays an important role in the internal expansion ...The present-day tectonic activities on the northeastern margin of the Pamir Plateau are mainly E-W oriented extensions, among which the Kongur Extensional System(KES) plays an important role in the internal expansion of the Pamir. As the largest earthquake since Taxkorgan earthquakes in 1895 and 1896, the Aketao earthquake occurred on the Muji fault on the northern portion of the KES in 2016. Since then, the trend of seismic activities along the KES has been paid much attention to. Based on the visco elastic layered lithosphere model, we calculate the co-seismic and post-seismic stress changes caused by five historical earthquakes on the KES and its adjacent areas since 1895, and analyze the interaction among strong earthquakes. The results show that all of the historical earthquakes after 1895 occurred in the areas where the co-seismic and post-seismic Coulomb stress increased. Coulomb stress loading at the hypocenters of the 1896 Taxkorgan earthquake, the 1974 Markansu earthquake and the 2016 Aketao earthquake were 0.251 MPa, 0.013 MPa and 0.563 MPa, respectively. The three earthquakes were catalyzed by such variations. The historical earthquakes increased the stress state on most segments of the Southern Kungai Mountain fault and Kongur fault along the KES. In particular, we can identify 2 visible earthquake gaps with increasing seismic hazard formed on the Qimugan segment and Bulunkou segment of the KES. The Qimugan section and the Bulunkou section are located at the fault transition zone with concentrated stress and high extension rate, so great attention should be paid to their seismic hazard at present day.展开更多
The estimation of contemporary tectonic stress field and deformation in active fold-and-thrust belts are imperative in identifying active geodynamics and resulting faulting phenomenon. In this paper, we focus on conte...The estimation of contemporary tectonic stress field and deformation in active fold-and-thrust belts are imperative in identifying active geodynamics and resulting faulting phenomenon. In this paper, we focus on contemporary extensional tectonics in the overall compressive setting of the Himalayan orogen. Here we examine the regional tectonic stress field and upper crustal deformation in the Himalayan thrust wedge using a 2D finite element technique, incorporating elastic rheology under plain strain condition. The elastic models demonstrate that the extensional tectonic stress and related nor- mal faulting is extensively developed in the southern front of the Himalaya at shallow crustal level (<10 km in depth). Our modelling shows a good consistency with the geological field evidences of active faulting, focal mechanism solutions of medium size earthquakes in the several sectors of the Himalaya. Results based on numerical simulation, tectonic analysis and taking geological and geophysical data into account, we interpret that the present-day extensional tectonic activity is not restricted in the southern Tibet but distributed in the different sectors of the Himalayan fold-and-thrust belt co-exist with compressional structures. Modelling results also indicate that the nature, distribution and orientation of the maximum compressive stress (?1) of the Himalaya are mainly controlled by the intra crustal Main Himalayan décollement (MHT). The significant amount of shear stress/strain concentration along the MHT in the western Nepal predict that the region is prone to moderate and great future earthquakes.展开更多
The stress intensity factor (SIF) of the semi elliptical surface crack in the finite body under extensional stress is sclculated by using the FEM software ANSYS release 5.5. The correction factor M f of SIF at ...The stress intensity factor (SIF) of the semi elliptical surface crack in the finite body under extensional stress is sclculated by using the FEM software ANSYS release 5.5. The correction factor M f of SIF at different point along the front of the crack is determined.The relation between M f and the semi elliptical shape a/c , the relative crack depth a/b , the variation of angle θ , the relative crack width 2c/w and the relative height width ratio h/w are calculated respectively. Finally the application range and the modification of the engineering formula about SIF is proposed.展开更多
The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing struc...The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing structure can significantly influence the patterns of AE spatial distribution. With increasing of differential stress, AE events firstly cluster around the two ends of pre-existing faults inside the jog and then along the line joining the two ends. The biggish AE events often occur around one end repeatedly. The image of AE clusters indicates the direction and the area of the fracture propagation. The direction of the macroscopic fracture in extensional and compressional jogs is perpendicular and parallel to the direction of axial stress, respectively. The weakening process before the fracturing of jog area is remarkable, and one of the typical precursors for the instability is that the cumulative frequency of AE events increases exponentially. After the fracturing of the jog the frequency and releasing strain energy of AE events decrease gradually. During the friction period, there is no precursory increasing of AE activity before the big stick-slip events. The change of b value in jog shows a typical change of decreasing tendentiously returning quickly before the instability. The decrease of b value occurs in the process of stress increasing and sometime goes down to the weakening stage, and the quick increase b values appears in a short time just before the instability. The comparative analysis shows that the difference in b value due to the different structures is larger than b value variation caused by increase of the differential stress. For the same sample, the temporal sequence of AE is strongly affected by the mechanical state, and the high loading velocity corresponds to the high release rate of strain energy and low b value. Due to its lower failure strength, the broken area is sensitive to small changes in differential stress. Therefore, it offers a potential explanation for the phenomena of precursory window or sensitive point and separation of seismic source and precursors.展开更多
基金funded by the Spark Program of Earthquake Technology of CEA(XH17023Y)The National Natural Science Foundation of China(41604079,41504011,41574017,41541029)the Science and Technology Partnership Program of Shanghai Cooperation Organization(2017E01030)
文摘The present-day tectonic activities on the northeastern margin of the Pamir Plateau are mainly E-W oriented extensions, among which the Kongur Extensional System(KES) plays an important role in the internal expansion of the Pamir. As the largest earthquake since Taxkorgan earthquakes in 1895 and 1896, the Aketao earthquake occurred on the Muji fault on the northern portion of the KES in 2016. Since then, the trend of seismic activities along the KES has been paid much attention to. Based on the visco elastic layered lithosphere model, we calculate the co-seismic and post-seismic stress changes caused by five historical earthquakes on the KES and its adjacent areas since 1895, and analyze the interaction among strong earthquakes. The results show that all of the historical earthquakes after 1895 occurred in the areas where the co-seismic and post-seismic Coulomb stress increased. Coulomb stress loading at the hypocenters of the 1896 Taxkorgan earthquake, the 1974 Markansu earthquake and the 2016 Aketao earthquake were 0.251 MPa, 0.013 MPa and 0.563 MPa, respectively. The three earthquakes were catalyzed by such variations. The historical earthquakes increased the stress state on most segments of the Southern Kungai Mountain fault and Kongur fault along the KES. In particular, we can identify 2 visible earthquake gaps with increasing seismic hazard formed on the Qimugan segment and Bulunkou segment of the KES. The Qimugan section and the Bulunkou section are located at the fault transition zone with concentrated stress and high extension rate, so great attention should be paid to their seismic hazard at present day.
文摘The estimation of contemporary tectonic stress field and deformation in active fold-and-thrust belts are imperative in identifying active geodynamics and resulting faulting phenomenon. In this paper, we focus on contemporary extensional tectonics in the overall compressive setting of the Himalayan orogen. Here we examine the regional tectonic stress field and upper crustal deformation in the Himalayan thrust wedge using a 2D finite element technique, incorporating elastic rheology under plain strain condition. The elastic models demonstrate that the extensional tectonic stress and related nor- mal faulting is extensively developed in the southern front of the Himalaya at shallow crustal level (<10 km in depth). Our modelling shows a good consistency with the geological field evidences of active faulting, focal mechanism solutions of medium size earthquakes in the several sectors of the Himalaya. Results based on numerical simulation, tectonic analysis and taking geological and geophysical data into account, we interpret that the present-day extensional tectonic activity is not restricted in the southern Tibet but distributed in the different sectors of the Himalayan fold-and-thrust belt co-exist with compressional structures. Modelling results also indicate that the nature, distribution and orientation of the maximum compressive stress (?1) of the Himalaya are mainly controlled by the intra crustal Main Himalayan décollement (MHT). The significant amount of shear stress/strain concentration along the MHT in the western Nepal predict that the region is prone to moderate and great future earthquakes.
文摘The stress intensity factor (SIF) of the semi elliptical surface crack in the finite body under extensional stress is sclculated by using the FEM software ANSYS release 5.5. The correction factor M f of SIF at different point along the front of the crack is determined.The relation between M f and the semi elliptical shape a/c , the relative crack depth a/b , the variation of angle θ , the relative crack width 2c/w and the relative height width ratio h/w are calculated respectively. Finally the application range and the modification of the engineering formula about SIF is proposed.
基金Project Study on the Short-term Forecasting Technique of Strong Earthquake (01-04-01) during the Tenth Five-Year Plan from Ministry of Science and Technology of China and Joint Seismological Science Foundation of China (102037).
文摘The spatio-temporal characteristics of acoustic emission (AE) during the deformation of rock samples with compressional and extensional en-echelon faults have been studied. The results show that the pre-existing structure can significantly influence the patterns of AE spatial distribution. With increasing of differential stress, AE events firstly cluster around the two ends of pre-existing faults inside the jog and then along the line joining the two ends. The biggish AE events often occur around one end repeatedly. The image of AE clusters indicates the direction and the area of the fracture propagation. The direction of the macroscopic fracture in extensional and compressional jogs is perpendicular and parallel to the direction of axial stress, respectively. The weakening process before the fracturing of jog area is remarkable, and one of the typical precursors for the instability is that the cumulative frequency of AE events increases exponentially. After the fracturing of the jog the frequency and releasing strain energy of AE events decrease gradually. During the friction period, there is no precursory increasing of AE activity before the big stick-slip events. The change of b value in jog shows a typical change of decreasing tendentiously returning quickly before the instability. The decrease of b value occurs in the process of stress increasing and sometime goes down to the weakening stage, and the quick increase b values appears in a short time just before the instability. The comparative analysis shows that the difference in b value due to the different structures is larger than b value variation caused by increase of the differential stress. For the same sample, the temporal sequence of AE is strongly affected by the mechanical state, and the high loading velocity corresponds to the high release rate of strain energy and low b value. Due to its lower failure strength, the broken area is sensitive to small changes in differential stress. Therefore, it offers a potential explanation for the phenomena of precursory window or sensitive point and separation of seismic source and precursors.
