Stable and reversible zinc metal anode with fluorinated graphite nanosheets surface coating

A highly stable zinc metal anode modified with a fluorinated graphite nanosheets(FGNSs)coating was designed.The porous structure of the coating layer effectively hinders lateral mass transfer of Zn ions and suppresses dendrite growth.Moreover,the high electronegativity exhibited by fluorine atoms creates an almost superhydrophobic solid-liquid interface,thereby reducing the interaction between solvent water and the zinc substrate.Consequently,this leads to a significant inhibition of hydrogen evolution corrosion and other side reactions.The modified anode demonstrates exceptional cycling stability,as symmetric cells exhibit sustained cycling for over 1400 h at a current density of 5 mA/cm^(2).Moreover,the full cells with NH_(4)V_(4)O_(10)cathode exhibit an impressive capacity retention rate of 92.2%after undergoing 1000 cycles.

Development of anti-corrosive coating on AZ31 Mg alloy subjected to plasma electrolytic oxidation at sub-zero temperature

Plasma electrolytic oxidation(PEO)is a promising surface treatment to generate adherent and thick anti-corrosive coating on light-weight metals(Al,Mg,Ti,etc.)using an eco-friendly alkaline electrolyte.High energy plasma,however,inevitably generates porous structures that limit their practical performance.The present study proposes a straight-forward simple method by utilizing sub-zero electrolyte(268 K)to alter the plasma characteristics during formation of the protective coating on AZ31 Mg alloy via PEO with a comparison to the electrolyte at room temperature(298 K).In refrigerated electrolyte,the formation of micro-defects is suppressed relatively at the expense of low coating growth,which is measured to be twice lower than that at 298 K due to the temperature-dependent soft plasma discharges contributing to the development of the present coating.As a consequence,corrosion resistance of the sample processed at 268 K is superior to that of 298K,implying that the effect of coating thickness is less dominant than that of compactness.This phenomenon is interpreted in relation to the ionic movement and oxide solidification controlled by soft plasma discharges arising from the temperature gradient between electrolyte and surface of the substrate during PEO.

Role of coatings and materials of external fixation pins on the rates of pin tract infection:A systematic review and meta-analysis

BACKGROUND Infection at the pin tract is a frequent and feared complication of external fixators(EF).The type of pin material and coatings have been regarded as possibly influencing infection rates.Over the last 20 years,few prospective clinical studies and systematic reviews addressed the role of coated pins on the rate of pin site infection in human clinical studies.AIM To assess the EF literature over the past 20 years on the clinical benefits of pins manufactured from varied materials and coating systems and their possible role in pin tract infection rates.METHODS We performed a systematic review according to the PRISMA and PICOS guidelines using four scientific platforms:PubMed,LiLacs,SciELO,and Cochrane.We searched the literature for related publications over the past 20 years.RESULTS A literature search yielded 29 articles,among which seven met the inclusion criteria.These studies compared stainless-steel pins and pins coated with hydroxyapatite(HA),titanium and silver.The pin tract infection definitions were arbitrary and not standardized among studies.Most studies included a low number of patients in the analysis and used a short follow-up time.Three metaanalyses were carried out,comparing stainless steel vs silver pins,stainless steel vs HA-coated pins,and titanium vs HA-coated pins.None of this analysis resulted in statistically significant differences in pin tract infection rates.CONCLUSION Currently,no clinical evidence supports the advantage of EF pins manufactured with materials other than stainless steel or coated over uncoated pins in reducing the rates of pin tract infections.A standardized definition of pin tract infection in external fixation is still lacking.

Bonding strength of graded anti-corrosive coatings of fluoroethylenepropylene (FEP)/polyphenylene sulfide (PPS)

Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis （EPMA） verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.

Cerium Methacrylate Assisted Preparation of Highly Thermally Conductive and Anticorrosive Multifunctional Coatings for Heat Conduction Metals Protection

Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.

Preparation technology and anti-corrosion performances of black ceramic coatings formed by micro-arc oxidation on aluminum alloys

In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.

Investigation of anti-corrosion property of hybrid coatings fabricated by combining PEC with MAO on pure magnesium

Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron microscopy(SEM)was used to observe the microstructure of the coatings,meanwhile,energy dispersive spectrometry(EDS)and X-ray diffraction(XRD)were separately used to investigate the elemental as well as phase compositions of the coatings.The anti-corrosion property of the coatings was evaluated by potentiodynamic polarization curves as well as electrochemical impedance spectroscopy(EIS).The results show that PEC process is closely related with the effects of adsorption as well as diffusion of the activated carbon atoms,and it can provide a favorable pretreatment surface with predesigned chemical composition to obtain a new kind of phase,namely Si C with superior corrosion resistance and chemical stability,in the following PEC+MAO hybrid coatings.Meanwhile,PEC preprocessing also can afford an excellent micro-structure to increase the coating thickness as well as to improve the compactness of the PEC+MAO hybrid coatings.During the fabrication process of the PEC+MAO hybrid coatings,an overlapping phenomenon in regard to coating thickness can be observed instead of heaping up layer by layer.Compared with both single PEC surface modification layers as well as single MAO coatings,the PEC+MAO hybrid coatings exhibit more superior anti-corrosion property.Especially,the EIS data reveal that the PEC+MAO hybrid coatings can act as an effective protection system to provide relatively excellent long-range anti-corrosion protection.Note also that employing same MAO technique for both single MAO treatment as well as PEC+MAO combining procedure is the key to this research.

An electrochemical method for evaluating the resistance to cathodic disbondment of anti-corrosion coatings on buried pipelines

Methods for evaluating the resistance to cathodic disbondment （RCD） of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests （CDT） have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method （PEM）, was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding （CD） were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.

Influence of graphene on the anti-corrosion performance of epoxy-based coatings

In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.

The Effect of Cerium Dioxide (CeO_2) in an Anti-corrosion and Self-lubricating Coating

The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.

An Abrasion Resistant TPU/SH-SiO_(2) Superhydrophobic Coating for Anti-Icing and Anti-Corrosion Applications

As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pollution,high energy-consumption,high-cost and other undesirable issues.Besides,the durability of superhydrophobic coating also plagues its commercial application.In this paper,we introduced a facile and environment-friendly technique for fabricating abrasion-resistant superhydrophobic surfaces using thermoplastic polyurethane(TPU)and modified SiO_(2)particles(SH-SiO_(2)).Both materials are non-toxicity,low-cost,and commercial available.Our methodology has the following advantages:use of minimal amounts of formulation,take the most streamlined technical route,and no waste material.These advantages make it attractive for industrial applications,and its usage sustainability can be promised.In this study,the mechanical stability of the superhydrophobic surface was evaluated by linear wear test.It is found that the excellent wear resistance of the superhydrophobic coating benefits from the characteristics of raw materials,the preparation strategy,and the special structure.In anti-icing properties test,the TPU/SH-SiO_(2)coating exhibits the repellency to the cold droplets and the ability to extend the freezing time.The electrochemical corrosion measurement shows that the asprepared superhydrophobic surface has excellent corrosion resistance that can provide effective protection for the bare Q235 substrates.These results indicate that the TPU/SH-SiO_(2)coating possesses good abrasion resistance and has great potential in anti-corrosion and anti-icing applications.

A novel anti-corrosion coating for magnesium alloy

A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat resisting test, neutral salt spray test and scanning electron microscopy (SEM). The results show that the coating has a stepped structure which can achieve good adhesion of first-grade, heat resistance temperature of 400℃, hardness of HV_ 0.50/30210 and anti-corrosion time of 250h in salt spray test. Meanwhile, the film forming and corrosion mechanism of the coating were also put forward based on the results of the Fourier transform infrared spectroscopy (FTIR) test and electrochemical impedance spectroscopy (EIS) test.

Effective response in nonlinear spherical coated composites under external AC and DC electric fields

By using the perturbation method, effective nonlinear direct current （DC） and alternating current （AC） responses of nonlinear composites with spherical coated inclusions randomly embedded in a host medium are studied under the action of an external electric field Ea = E0 ＋ E1 sinωt ＋ E3 sin 3ωt with different amplitudes and frequencies. The local potentials of composites at all harmonics are given in the inclusion particles and the host regions. All effective nonlinear responses to composites and the relationship between the effective nonlinear responses at all harmonics are also deduced for the spherical coated inclusions in a dilute limit.

Tribology Performance and Adhesive Strength Evaluation of TiAlSiN Coating

Scratch test and friction test were performed to evaluate the internal and external interface behaviors of TiAISiN coating, respectively. The critical compressive and shearing stress of coating failure during scratch test were calculated and the values are 30.84 MPa and 4.98 MPa respectively. The average friction coefficients of TiAISiN coat- ing against 2Crl2Ni4Mo3VNbN steel are 0.70 （sliding speed 50 m/rain）, 0.63 （sliding speed 100 m/min）, and 0.81 （sliding speed 150 m/min）. The elements diffusion was analyzed by EDS. A1 and Si element of coating material dif- fuse to the steel disc, except Ti element. The oxidation decreases with the increase of sliding speed, but the adhesion increases with the increase of sliding speed. More A1 element diffuses to the steel disc at the high sliding speed, but the diffusion of Si element keeps almost constant at dlfferent sliding speeds.

Calculation and Improvement on External Quantum Efficiency of OLEDs

The calculation of the external quantum efficiency(η_ ext ) of organic light-emitting devices(OLEDs) is presented theoretically. The basic idea is to obtain η_ ext by calculating the fraction of the generated light that can escape through the top surface and the average transmittance over the escape cone. During the calculation, the effects of the interference, absorption and multiple reflections are neglected. Then a result of a typical 8-tris-hydroxyquinoline aluminum(Alq_ 3 )-based OLEDs on a planar glass substrate is obtained. And a twice increase in η_ ext can be achieved by using a high-index-glass substrate with an antireflection coating(SiO_ 2 ) on substrate surface.

Recent Progress in Superhydrophobic Coatings Using Molecular Dynamics Simulations and Experimental Techniques

Superhydrophobic(SH)coatings are intended to resist a surface from cor­rosion and thereby increases the product life duration.It is also a promising solution to save cleaning costs and time by providing self-clean nature to the surface.This review article provides the most recent updates in design­ing SH surfaces and their characterizations adopted both in experimental and computational techniques.To gain a comprehensive perspective,the SH surfaces present in nature those are inspiring human beings to mimic such surfaces are introduced at the beginning of this article.Subsequently,different fabrication techniques undertaken recently to design artificial SH surfaces are briefly discussed.Recent progress in computations employed in the development of SH surfaces is then discussed.Next,the limitations in SH surfaces are addressed.Finally,perceptiveness of different strategies and their limitations are presented in the concluding remarks and outlook.Overall,this mini review article brings together and highlights the significant advancements in fabrication of superhydrophobic surfaces which may surely help the early-stage researchers/scientists to plan their work accordingly.

建筑装饰材料智能修复涂层制备方法探析

随着社会经济的发展,建筑装饰材料的使用不可或缺,其长久性和稳定性受自然环境腐蚀的考验。施加涂层是有效的防腐手段,解决自修复涂层稳定性和长久性的问题也是防腐科学研究和实际应用的前沿。综述了几种常见的自修复涂层的制备及防腐机制:外援型自修复涂层,在涂料中添加含成膜物质/缓蚀剂的微胶囊,当涂层受到机械冲击后胶囊随之破裂并释放成膜物质/缓蚀剂,形成保护膜或抑制电化学反应保护金属基底;本征型自修复涂层,其涂层基质对环境因素敏感,在环境刺激下通过恢复涂层基质聚合物网络中内在化学键和/或物理构象而修复涂层,其主要包括动态键型和形状记忆型自修复涂层;多重自修复涂层,通过将含有成膜剂/缓蚀剂的微胶囊掺进可恢复涂层基质聚合物中,使其兼顾外援型和本征型自修复涂层的性能。总的来说,自修复涂层的防腐机制主要是通过在涂层中添加缓蚀剂/成膜物质或使涂层恢复活性来抑制涂层下的金属电化学腐蚀,目前建筑装饰用的自修复防腐涂层已逐步应用到建筑防腐工程中,但仍需要在多个方面进行更加深入的研究,多重自修复涂层是未来自修复涂层研究和应用发展的方向,其长效稳定性及制备工艺是主要的科学问题。

Zincophilic Ti_(3)C_(2)Cl_(2)MXene and anti-corrosive Cu NPs for synergistically regulated deposition of dendrite-free Zn metal anode

Dendrites growth,chemical corrosion,and hydrogen evolution reaction(HER)on zinc anodes are the main barriers for the development of aqueous zinc-ion batteries(AZIBs).Constructing interfacial protec-tive layer is an effective way to alleviate the side reactions on the anodes.Herein,Cu/Ti_(3)C_(2)Cl_(2)MXene(CMX)with high zincophilic and hydrophobic property is prepared by the lewis molten salts etching method,and the CMX interface protection layer is constructed by a simple spin coating.The CMX coat-ing layer can provide abundant nucleation sites and uniformize the charge distribution through the zin-cophilic Ti_(3)C_(2)Cl_(2)MXene matrix,leading to homogenous Zn deposition.In addition,the hydrophobic coat-ing contained anti-corrosive Cu nanoparticles can prevent the Zn anode from the electrolyte,beneficial for suppressing the chemical corrosion and HER.Therefore,the stable and reversible Zn plating/stripping is achieved for the Zn anode coated by the CMX,which exhibits the lifespan of over 1400 h at 0.5 mA cm^(−2),and even can steadily run for 700 h with 65 mV at 10 mA cm^(−2).Furthermore,CMX@Zn shows a high coulombic efficiency of over 100%for 3800 cycles,which indicates that the CMX@Zn electrode has excellent stability and reversibility of Zn stripping/plating.The full batteries assembled with ZnCoMnO/C(ZCM)cathodes also exhibits higher capacity(450.6 mAh g^(−1)at 0.1 A g^(−1))and cycle stability(capacity retention of 70%after 1500 cycles).This work enhanced the lifespan of AZIBs and broaden the research of multifunctional coating layer to other secondary batteries based on metal anodes.

激光熔覆铁基合金涂层的研究进展

激光熔覆技术作为一种先进的材料表面改性技术,具有加工效率高、涂层稀释率低且与基体结合强度高、自动化程度高、环境友好等优点。在各类熔覆材料中,铁基合金在成分上与钢铁材料最为接近,且其成本相对较低,近年来在设备零部件表面强化和再制造领域得到广泛应用。结合国内外最新相关研究成果,从材料体系、工艺参数、外场辅助技术等方面对激光熔覆铁基合金涂层的研究进展进行了综述。总结了熔覆材料的选材依据以及铁基自熔性合金粉末、不锈钢粉末、铁基非晶合金粉末、铁基复合粉末等各类材料的特点和应用。系统讨论了激光功率、扫描速度、光斑直径、送粉速率等工艺参数对铁基涂层成形质量和微观组织及性能的影响机制,并介绍了工艺参数优化在高质量熔覆层制备中的应用。同时,论述了超声振动、电磁场、温度场等外场辅助技术在激光熔覆铁基合金涂层中的应用,阐明了外加能场对激光熔覆过程中熔池及凝固组织的作用机理。最后对激光熔覆铁基合金涂层未来的发展方向进行了展望。

自然通风、冷屋顶与外遮阳对室内热环境改善效果实验研究

对自然通风、冷屋顶与外遮阳3种被动技术在夏热冬冷地区的综合隔热降温作用及对室内热环境的改善效果进行了测试分析。结果显示:当三者协同作用时,外遮阳可以遮挡太阳辐射,有效降低窗户的得热量,实验房间玻璃外表面温度较对比房间最高降幅达到7.6℃;高反射涂料的应用使屋顶表面降温幅度达到10.3℃,有效减少了屋顶的温差传热;自然通风系统成功诱导了连续并具有周期性波动的气流,并对埋管内空气有着良好的预冷效果;实验房间室内温度稳定在26.8~27.9℃之间,室内热环境得到了明显的改善。