Metal Ions Extraction with Glucose Derivatives as Chelating Reagents in Supercritical Carbon Dioxide

A series of glucose derivatives have been used as chelating reagents to extract metal ions in supercritical carbon dioxide. With perfluoro-l-octanesulfonic acid tetraethylammonium salt as additive, glucose derivatives were selective for Sr^2＋ and Pb^2＋ extraction in supercritical carbon dioxide.

Preliminary Results of Ion Beam Extraction Tests on EAST Neutral Beam Injector

The neutral beam injection （NBI） system is one of the most important auxiliary plasma heating and current driving methods for fusion device. A high power ion beam of 3 MW with 80 keV beam energy in 0.5 s beam duration and a long pulse ion beam of 4 s with 50 keV beam energy ion beam extraction were achieved on the EAST neutral beam injector on the teststand. The preliminary results show that the EAST-NBI system was developed successfully on schedule.

Determination of inorganic anions in ethyl acetate by in-line hollow fiber membrane extraction with ion chromatography

In this work, a novel hollow fiber membrane extractor was set up to extract inorganic anions from ethyl acetate using deionized water. Inorganic anions in slightly soluble organic solvents can be determined by the in-line hollow fiber membrane extractor coupled with ion chromatography at first time. Different aspects of the extraction procedure such as magnetic stirring speed, extraction flow rate and extraction time were optimized to achieve high extraction efficiency and good separation results. Satisfactory linear range, limits of detection and good repeatability were obtained. The procedure was applied to analyze inorganic anions in two commercial ethyl acetate samples.

Extraction Mechanism of La^(3+) from Hydrochloric Acid Solution Using Cyanex 302

The solvent extraction of La 3+ from hydrochloric acid solutions was investigated using bis (2, 4, 4-trimethylpentyl) monothiophosphinic acid (Cyanex 302, HL) as an extractant. The effect of equilibrium of aqueous acidity on extraction of La 3+ using Cyanex 302 in different diluents was discussed. The effects of extractant concentration and chloride ion on the extraction reaction were also studied. Stoichiometry of the extraction reactions and the nature of metal complexes formed were determined using slope analysis technique and IR measurement.

Solid-liquid solvent extraction of metal ions

An overview of extraction of some trace metal ions using molten solvent (lowmelting substance) during last two decades is presented. The development of this technique since itsinception is briefly traced. The comparison of extraction efficiency, thermodynamics and kineticsmainly involving extraction of rare earth ions between molten solvent extraction at high temperatureand usual liquid-liquid extraction at room temperature are discussed in detail. The variousparameters obtained from the previous and present studies such as equilibrium extraction constantK_(ex), pH_(1/2), thermodynamic and kinetic data are displayed in tabular form. Finally, the currentdemands, disadvantages and future prospects are also evaluated.

High extraction ability of 1,3-dialkynyl calixarene towards mercury(Ⅱ) ion

The reaction of 1,3-dipropyn-2-yloxycalix[4]arene with mercury（U） acetate could give mercury-containing alkynyl calixarene polymer. The extraction behavior of 1,3-dipropyn-2-yl-oxycalix[4]arene towards mercury（Ⅱ） ion was examined. When the mole ratio of Hg^2＋/calixarene was 1：1, the extractive percent can reach to 99.1%, and the extraction capacity was up to 431 mg/g. It could also decrease the Hg^2＋ concentration from 5 to 0.85 mg/L, which was only 17% of the national standard of effluent and satisfied the national standard of drinking water. The extraction process included chemical reaction.

Aqueous Zn-MnO_(2) battery: Approaching the energy storage limit with deep Zn^(2+) pre-intercalation and revealing the ions insertion/extraction mechanisms

Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.

Lithium Ion Extraction from the High Ration Mg/Li Salt Lake Brine with Ionic Liquid in Triisobutyl Phosphate and Kerosene

1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fields,especially in

A New Three-Dimensional Code for Simulation of Ion Beam Extraction: Ion Optics Simulator

A new thee-dimensional code, ion optics simulator （IOS）, to simulate ion beam extraction is developed in visual C＋＋ language. The theoretical model, the flowchart of code, and the results of calculation as an example are presented.

Extraction of lanthanide ions with N,N,N′,N′-tetrabutyl-3-oxadiglycolamide from nitric acid media

Extractability and extraction mechanism of lanthanide ions were investigated by using a new extractant,N,Nn,N′,N′-tetrabutyl-3-oxa-diglycolamide(TBDGA),in toluene from nitric acid media.The effects of HNO_3 and TBDGA concentrations,and temperature,on extraction of lanthanide ions were studied.Stoichiometrics of the main extracted species were HNO_3·TBDGA and M(NO_3)_3-3TBDGA(M = Er,Dy,Tb,Gd,La,Ce,Nd,Sm and Eu).The extracted species for metal ions were established to be ionic complex.In this complex,nitrate anion was not coordinated to the central ion.The extraction pattern increased gradually across the lanthanide ions series,showing enhanced affinity of TBDGA toward heavy lanthanide ions.Thermodynamic parameters were investigated for the exothermic extraction reaction.

Synthesis and Characterization of New Calix [4] arene Amino Acid Ester Derivatives and Their Metal Extraction Properties

A new type of calixarenes containing amino acid ester derivatives has been synthesized. Their 1H NMR characteristics are discussed. Metal ion extraction experiment has shown that calixarene amino acid esters (2a, 2b) possess good extraction efficiency for transition metal ions (Cu 2+ , Ni 2+ , Zn 2+ ) and poor extraction efficiency for alkali metal ions (Na +, K +).

Transient Behavior of Negative Hydrogen Ion Extraction from Plasma

For plasma source, the extraction of negative ions is quite different from that of positive ions. To understand the effect of extraction field on plasma, the time-dependent behavior of negative hydrogen ion extraction from a negative ion source has been studied by particle-in-cell simulation in the collisionless limit. The simulations have shown that, due to the difference in dynamics between electrons and ions, the imbalance of the numbers of charged particles occurs in the source, results in the broadening of plasma sheath and the great increase of plasma potential. The resultant high sheath field and the ambipolar electric field in plasma make the negatively charged particles congregate inside the sheath and move toward the extraction outlet. The emission area of negative ions is much smaller than that of the extraction aperture, which is in sharp contrast to the case of positive ion extraction.

Electrodeposited iodide ions imprinted polypyrrole@bismuth oxyiodide film for an electrochemically switched renewable extractor towards iodide ions

Effective extraction and regeneration of radioactive iodide is one of urgent concerns for the safe utilization of nuclear energy.As a novel environmentally benign ion separation technique,electrochemically switched ion extraction(ESIE)process can be applied for effective capture and recovery of iodide ions(I^(-)).Herein,a novel kelp seaweed-like core/shell I^(-)imprinted polypyrrole@bismuth oxyiodide(PPy/I^(-)@BiOI)composite film is successfully prepared for the selective I^(-)capture in the ESIE system.It is found that the I^(-)can be easily trapped in the PPy/I^(-)@BiOI film after I^(-)is in situ desorbed from the film by an electrochemical reduction process since it offers particular electroactive binding sites for I^(-)extraction.The I^(-)imprinted PPy/I^(-)@BiOI film displays an extraction capacity as high as 325.2 mg·g^(-1)for I^(-)with favorable stability.In particular,the extraction and desorption of I^(-)is achieved by adjusting the redox potential and the pristine PPy/I^(-)@BiOI film can be regenerated and reused for multiple times without decrease in extraction capacity.It is expected that such a PPy/I^(-)@BiOI film would be useful as an electrochemically switched renewable extractor that could capture and regenerate I^(-)from radioactive water.

Review on Li-insertion/extraction Mechanisms of LiFePO4 Cathode Materials

The work distills the main mechanisms during the lithium insertion/extraction of LiFePO_4 cathode materials. The "diffusion-controlled" and "phase-boundary controlled" mechanism are especially illustrated. Meanwhile, some recent observation and analyses by in-situ or in operando on the Li-insertion/extraction of LiFePO_4 are summarized and prospected.

Transport of yttrium metal ions through fibers supported liquid membrane solvent extraction

A novel idea of transport of yttrium(Ⅲ) metal ions through fibers supported liquid membrane in two stage processes namely source to membrane and membrane to receiving phase has been proposed.The fibers supported liquid membrane was impregnated with different concentrations carrier.The experimental variables explored were concentration of yttrium(Ⅲ) ions,pH of source phase,PC-88A concentration in membrane phase,acid concentration in receiving phase and stirring speed.The pre-concentration of yttrium(Ⅲ) ions ...

Extraction of Heavy Metals from Solid Material by Supercritical CO_2

Extraction of heavy metal ions from solid matrix by means of an incorporation of chelating agents with supercritical carbon dioxide（scCO2） was investigated experimentally. Four commercially available chelating agents, diethylammonium diethyldithiocarbamate（Et2NH2DDC）, trifluoroacetylacetone（TFA）, hexafluoroacetylacetone（HFA） and thenoyltrifluoroacetone（TTA） were tested. The extraction experiments were conducted at 50 °C and 1.39×107― 2.80×107 Pa. According to the experimental results, for the extraction of Cu2＋, all the chelating agents investigated here are effective. For other metal ions, such as Pb2＋, Ni2＋ and Cd2＋, Et2NH2DDC exhibited a better extraction result, while other chelating agents were less effective. This investigation is expected to provide a tentative evaluation on the scCO2-based metal extraction from solid media.

Extraction of uranyl(VI) ion with N,N-dibutyloctadecanamide from nitric acid solution

Ｅｘｔｒａｃｔｉｏｎｏｆｕｒａｎｙｌ（ＶＩ）ｉｏｎｗｉｔｈＮ，ＮｄｉｂｕｔｙｌｏｃｔａｄｅｃａｎａｍｉｄｅｆｒｏｍｎｉｔｒｉｃａｃｉｄｓｏｌｕｔｉｏｎＳｕｎＧｕｏＸｉｎ，ＷａｎｇＹｏｕＳｈａｏ，ＢａｏＢｏＲｏｎｇ（ＳｈａｎｇｈａｉＩｎｓｔｉ...

Extraction Characteristics of Radio Frequency ICP Ion Source

An inductively coupled radio frequency ion source has been developed and its extraction characteristics measured. Beam current density up to 0.11 mA/ cm2 was obtained with argon at a rf discharge power of about 140 W. The dependences of ion beam on the discharge parameters such as rf source power, gas pressure and gas flow rate was studied.

Chemical Extraction Preparation of Delithiated Cathode Materials of Li-ion Battery

A method of conventional chemical reaction to prepare delithiated cathode materials of Li-ion battery was introduced. The cathode material of Li-ion battery was mixed with oxidizing agent Na2S2O8 in water solution, and the solution was stirred continuously to make the chemical reaction proceed sufficiently, then the reaction product was filtered and finally the insoluble delithiated cathode material was obtained. A series of tests were conducted to verify the composition, crystal structure and electrochemical property of the delithiated cathode materials were all desirable. This method overcomes the shortcomings of battery charging preparation and chemical extraction preparation employing other oxidizing agents.

Micelle Mediated Extraction of Iron and Its Determination in Geological, Geochemical, Hydrogeochemical, Biogeochemical and Process Solutions

Iron irrespective of its valency states forms bluish 1:1 cationic, bluish-violet 1:3 neutral and purple 1:3 anionic complexes with 2,3-dihydroxynaphthalene, at pH 2 - 3, 4 - 5 and 8 - 10, respectively. The cationic bluish complex is highly insensitive and not extractable in organic solvents. Similarly, the bluish violet 1:3 neutral complex is of moderate sensitivity, and it is extractable in organic solvents with reduced sensitivity. The purple 1:3 anionic complex is as such not extractable in any organic solvents. However, in the surfactant medium of the cationic surfactant, cetyltrimethylammonium bromide it is extractable in organic solvents with enhanced sensitivity. The 1:3 anionic complex which is extractable in organic solvents as an ion associate in the presence of cetyltrimethyl ammonium bromide is chosen for application to Silicate rocks, Minerals, Soils, Stream sediments, Concentrates, Tobacco leaves, Cigarettes and Waters, for accurate and sensitive determination of iron owing to facile extraction of iron, enhanced sensitivity high selectivity and better reproducibility of results. The present paper describes a systematic study on the development of an extraction spectrophotometric method for the determination of iron in samples of diverse matrices.