Influence of Modifiers, Extractants, and Trappers on Lipid Composition with Liquids in Standard State Extraction, Supercritical Fluid Extraction and Trapping by Supercritical Fluid Extraction, Part II

Modifiers have a broad array of influences on extraction with liquids in standard state, supercritical fluid extraction (SFE), trapping by SFE and supercritical fluid chromatography (SFC). They can significantly change the qualitative and quantitative results. Quantitative and qualitative results can be influenced by different extractants and modifiers in different ways as it was shown by Brondz et al. at 2007 in “The real nature of the indole alkaloids in Cortinarius infractus: Evaluation of artifact formation through solvent extraction method development”, J. Chromatography A, 1148, 1-7. The choice of correct extractant, modifier, and trapper to the bulk mobile phase for supercritical fluids (SFs) or for liquids in subcritical or in the liquids in standard state is a challenge in any extraction procedure. This is the second paper in a sequence that describes the influence of extractants and modifiers on the performance of SFs and results of extraction with liquids in standard state and SFE. Here, attention is given to possible mistakes in qualitative and quantitative results by poor understanding of the influence of extractants, modifiers, and trappers on extraction and trapping process by a careless choice of extractant, modifier, and trapper for extraction with liquids in standard state and SFE. The SF chosen for discussion in the paper is CO2. However, similar effects can be observed with use of other SFs and fluids in subcritical and standard states. In this paper, the discussion of lipids, fatty and carboxylic acids have been chosen as target analytes for extraction, trapping and analysis. Some examples from extraction with liquids in the standard state and trapping in the supercritical state (collection) have been furnished with the wrong extractant, modifier, or trapper which is presented for illustration of inappropriate choice of extractants, modifiers, and trappers.

Direct extraction of Mo(Ⅵ) from sulfate solution by synergistic extractants in the rotation column

Direct extraction of molybdenum from sulfate solution with synergistic extractants(mixture of D2EHPA and TBP)was studied in the rotation column.The influence of extractant concentration and initial pH of aqueous phase was studied in the bench scale experiments.The outcomes demonstrated that the synergistic solvent extraction enhances the constancy of the extracted complexes for transfer into the organic phase.In the continuous experiments,the effect of different operating parameters such as speed of agitation,inlet solvent flow rate and inlet aqueous flow rate on the holdup,mean drop size,drop size distribution,slip and characteristic velocities and extraction percentage were examined.Modified correlations were proposed for prediction of hydrodynamic parameters with consideration of reaction extraction condition in the rotation column.Furthermore,these correlations were compared with the experimental data.According to the results,the direct extraction of Mo(Ⅵ)from aqueous solution and sulfuric media with extraction efficiency of 90.4%was obtained at higher rotor speed(240 r·min–1 rpm)in this column.

Solvent extraction separate of zinc and cadmium from magnesium and calcium in sulfuric acid medium by mixing extractants

Synergistic extraction has been proven to enhance extractability and selectivity for the separation of cadmium and zinc from magnesium and calcium in the sulfuric acid medium with Mextral V10 and Mextral 622H(aromatic hydroxamic)mixtures diluted in DT100.Mixtures of Mextral V10 and 622H are highly selective for Zn and Cd over Mg and Ca compared with the single Mextral V10,resulting in larger synergistic shifts for zinc and cadmium with theΔpH_(50(Zn–Ca))values increasing substantially from0.83 to 1.73 pH units andΔpH_(50(Cd–Ca))values increasing from 0.63 to 2.13 p H units.The aqueous to organic ratio(A/O ratio),the saponification ratio of Mextral V10 and extracting agent concentration were studied on the effect of metal ions extraction,which helped to increase the organic capacity of metal extraction.The Mc Cabe-Thiele plot for Cd and Zn extraction with 5%(volume fraction)Mextral V10 and 5%Mextral 622H extractants mixture indicate the necessity of only one theoretical stages at an A/O ratio of 1.5:1.One stage extraction simulation test conducted at pH 6.50 shows that Cd and Zn reach the extraction of 99.6%and 97.9%,respectively,and only low levels of magnesium and calcium are extracted in the organic phase.The extracted Zn^(2+)or Cd^(2+)-organic species are Zn(A_1)(A_2)or Cd(A_1)(A_2)with the mixture system by slope analysis.

Study of Zirconium and Hafnium Separation by Solvent Extraction Technique from Nitric and Hydrochloric Solutions with Acid, Basic and Neutral Extractants

This paper describes the study of the extraction of Zr and Hf in nitric and hydrochloric media by solvent extraction technique using different types of extractants. The effect of the extractants DEHPA, IONQUEST?801 and CYANEX?272, TBP, CYANEX?923, PRIMENE?JTM, ALAMINE?336 and ALIQUAT?336 was investigated. For acid extractants in both nitric and hydrochloric media, a high degree of extraction was observed, although they had low selectivity in separating the metals. For the acid extractants also, it was not possible to strip the metals from the organic phase through acid solutions. In this case, a stripping solution with very high acidity would be required, and this is not viable. When the basic extractants were used, no metal extraction was observed under the conditions investigated, indicating no extractable anionic species in either media. The optimum zirconium/hafnium separation was achieved using an acidity of 7.0 mol?L?1, nitrate concentration of 9.2 mol?L?1 and 1.5 mol?L?1 of TBP. In these conditions, a separation factor of 12.6 was obtained.

An Exploratory Study of Tridentate Amine Extractants: Solvent Extraction and Coordination Chemistry of Base Metals with <i>Bis</i>((1<i>R</i>-benzimidazol-2-yl)methyl)amine

Solvent extraction of base metals using bis((1-decylbenzimidazol-2-yl)methyl)amine (BDNNN) showed a lack of pH-metric separation of the metals. The extraction system was described quantitatively using the equilibria involved to derive the mathematical explanation for the two linear log D vs pHe plots for each metal ion extraction curve, and coordination numbers could also be extracted from the two slopes. The lack of separation was attributed to the absence of stereochemical “tailor making” since the complexes isolated from the reaction of the ligand, bis((1H-benzimidazol- 2-yl)methyl)amine (NNN), with base metals suggested the formation of similar octahedral complex species from spectral and crystal structure evidence. The bis tridentate coordination observed was in agreement with information extracted from the extraction data. This investigation opens up an opportunity and an approach for the evaluation of amines as extractants but cautions against tridentate ligands.

Linear Free Energy Relationships in Extraction of Rare Earths by Acidic Organophosphorus Extractants

The correlation relationships of apparent extraction equilibrium constant (1gK(ex)) with the electronic effect parameter( Sigma sigma(Phi)) and the steric effect parameter ( Sigma upsilon ) of the substituents in extractant molecules are investigated by linear regression analysis in the extraction of rare earths by various classes and structures of monoacidic organophosphorus extractants. The results indicate that in Linear free energy relationship formula 1gK(ex) = rho Sigma sigma(Phi) + psi Sigma upsilon + h generally follows for this kind of extraction systems. Accordingly, the quantitative structure-behaviour relationships of extractants are discussed. These relationships can be preliminarily applied to predict the 1gK(ex) values of rare earth extraction with definite structures of this class of extractants, and thus can provide some directions for the design of new RE extractants.

Extraction of Tungsten and Molybdenum by Various Organic Compounds as Extractants

Seventy organic compounds including various organophosphorus esters, amines and oxygen-based ligands were investigated as extractants. The experiment results show that amines are excellent extractants for W and Mo. Their sequence of extraction ability for W is as follows: quarternary amine > tertiary amine > secondary amine > primary amine. Acidic organophosphorus extractants do not extract W, but can extract Mo with high extraction ability from the acidic solution. These extractants could provide a potential process for separating W from Mo.

Monoalkyl Esters of Isoalkylphosphonic Acid as Extractants in Rare Earth Separation

Four monoalkyl esters of isoalkylphosphonic acids have been studied for the chromatographic separation of rare earths (RE).The relationship between distribution ratios and acid concentration of the eluants for samarium and ytterbium has been explored.The characteristics of these extractants loaded onto macroreticular poly (methyl methacrylate) resin beads for the separation of lanthanum,cerium,praseodymium and neodymium have been compared.Among the extractants studied,mono(1-methylheptyl) ester of isooctylphosphonic acid was found to be the best for RE separation.The acidity for separation is lower than any known P-containing extractants for the same purpose.For instance,with 1.73 mol·L^(-1) nitric acid as eluent,thulium,ytterbium and lutetium can be separated quantitatively.The extractant-loaded resins possess high column efficiency with good kinetic characteristics.The extraction mechanism was also explored.

Quantum Chemical Calculation on the Structures and Electronic Properties of Phosphonate Ester as Rare Earth Extractants

Molecular mechanics, molecular dynamics and semi empirical quantum chemical method have been used to study the geometric and electronic structures of six phosphonate ester as rare earth extractants. The results show that the phosphorus atom exhibits sp 3 hybridization. The structures of the extractants are determined by the repulsion of the hydrocarbon groups. In the extractants that have two 2 ethyl hexyl groups, one 2 ethyl hexyl extends straight, and the other extends twistily. When the number of oxygen atom decreases, the negative charge of the phosphoryl oxygen atom increases, but the negative charge of oxygen atom and the positive charge of hydrogen of the hydroxyl group decreases, and the energies of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital(LUMO) increase. The energies of the occupied frontier orbitals are close to each other.

Comparative Study between D2EHPA and Cyanex 272 as Extractants of Mn(II) from a Leached Liquor Produced by Reductive Leaching of a Pyrolusite Ore with SO₂

This paper compares the efficiency of D2EHPA and Cyanex 272 to extract the divalent manganese cation from an actual leaching solution obtained by reductive leaching of a low-grade pyrolusite ore, using SO2 gas. The studied variables were the extractant concentration in the organic phase, the pH of the leached liquor and the volume ratio between organic phase and leached liquor. It was observed that D2EHPA is a better extractant than Cyanex272. Therefore, with the best experimental conditions found, both extractants reach a manganese recovery around 95% with five extraction stages conducted under the following conditions: 25?C, O/A = 2, 10% volume of extractant concentration in the organic phase, pH of the leached liquor before the mixing between 8 and 8.5, and one minute of mixing time for each extraction stage.

Single and Sequential Extraction of Copper by Different Extractants from Different Peat Soil Samples of Bangladesh

A comprehensive in vitro study on single and sequential extraction methods for Cu exraction by different extractants of distinct chemical nature from some peat soils of Bangladesh was conducted to assess the pattern of metal-extractability in drying and wetting sequences. Samples were collected from peat basins of two different districts of Bangladesh (Gopalgonj and Bagerhat) and an incubation study was designed and conducted in which soils were incubated to three alternate drying and wetting cycles for 21 days. Single and sequentially extracted Cu ions in all three cycles and by all three selective extractants were compared. Maximum amount of Cu was extracted in drying days and 1M HCl extracted the largest proportion of Cu from all the soils in each incubation time. Conversely, 1M NH4Cl was the least effective extractant for extracting Cu by both single and sequential process in either day of incubation. Considerable amount of Cu was extracted by 0.005 M DTPA in dry periods. In general, single extraction was found to be more effective in extracting Cu in the alternate drying and wetting cycles from the peat soil samples except for 1M HCl in initial drying days.

Substituted diamides of dipicolinic acid as extractants and ionophores for rare earth metals

The variety of newly synthesized diamides of dipicolinic acid(DPA)bearing methyl-and oxymethyl substituents in various positions of phenyl ring was investigated as potential ligands for liquid-liquid extraction of rare earth metal ions and as membrane active compounds in plasticized polymeric membranes of potentiometric sensors.It is found that scandium is extracted with 2,6-pyridinedicarboxylic acid diamides similarly to heavy lanthanides,while yttrium is extracted together with light group lanthanides.DPA shows high selectivity for the separation of cadmium/zinc,lead/nickel or copper/nickel pairs.The four out of six studied ligands demonstrate significant potentiometric sensitivity towards scandium,yttrium and lanthanides in 10^(-7)-10^(-3)mol/L concentration range in nitric acid solutions.The trends in sensitivity values vary depending on a ligand structure and the highest values are observed for Sc^(3+)and heavy lanthanides.According to the evaluated selectivity Sm^(3+)is the most preferred ion,while La^(3+)is the most discriminated.The differences in sensor behavior in rare earth metal solutions assume that such devices can be applied in sensor arrays for potentiometric analysis of lanthanide mixtures.

Development course of separating rare earths with acid phosphorus extractants: A critical review

This paper reviews the development course of separating rare earths with acid phosphorus extractants,including extraction chemistry(thermodynamics and kinetics), separation process and industrial application, the loss/degradation of extractants, etc.

Biomaterials-based anti-inflammatory treatment strategies for Alzheimer's disease

The current therapeutic drugs for Alzheimer's disease only improve symptoms,they do not delay disease progression.Therefo re,there is an urgent need for new effective drugs.The underlying pathogenic factors of Alzheimer's disease are not clear,but neuroinflammation can link various hypotheses of Alzheimer's disease;hence,targeting neuroinflammation may be a new hope for Alzheimer's disease treatment.Inhibiting inflammation can restore neuronal function,promote neuro regeneration,reduce the pathological burden of Alzheimer's disease,and improve or even reverse symptoms of Alzheimer's disease.This review focuses on the relationship between inflammation and various pathological hypotheses of Alzheimer's disease;reports the mechanisms and characteristics of small-molecule drugs(e.g.,nonsteroidal anti-inflammatory drugs,neurosteroids,and plant extracts);macromolecule drugs(e.g.,peptides,proteins,and gene therapeutics);and nanocarriers(e.g.,lipid-based nanoparticles,polymeric nanoparticles,nanoemulsions,and inorganic nanoparticles)in the treatment of Alzheimer's disease.The review also makes recommendations for the prospective development of anti-inflammatory strategies based on nanocarriers for the treatment of Alzheimer's disease.

A comparison study on structure-function relationship of polysaccharides obtained from sea buckthorn berries using different methods:antioxidant and bile acid-binding capacity

In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.

Evaluation of the intracellular lipid-lowering effect of polyphenols extract from highland barley in HepG2 cells

Active ingredients from highland barley have received considerable attention as natural products for developing treatments and dietary supplements against obesity.In practical application,the research of food combinations is more significant than a specific food component.This study investigated the lipid-lowering effect of highland barley polyphenols via lipase assay in vitro and HepG2 cells induced by oleic acid(OA).Five indexes,triglyceride(TG),total cholesterol(T-CHO),low density lipoprotein-cholesterol(LDL-C),aspartate aminotransferase(AST),and alanine aminotransferase(ALT),were used to evaluate the lipidlowering effect of highland barley extract.We also preliminary studied the lipid-lowering mechanism by Realtime fluorescent quantitative polymerase chain reaction(q PCR).The results indicated that highland barley extract contains many components with lipid-lowering effects,such as hyperoside and scoparone.In vitro,the lipase assay showed an 18.4%lipase inhibition rate when the additive contents of highland barley extract were 100μg/m L.The intracellular lipid-lowering effect of highland barley extract was examined using 0.25 mmol/L OA-induced HepG2 cells.The results showed that intracellular TG,LDL-C,and T-CHO content decreased by 34.4%,51.2%,and 18.4%,respectively.ALT and AST decreased by 51.6%and 20.7%compared with the untreated hyperlipidemic HepG2 cells.q PCR results showed that highland barley polyphenols could up-regulation the expression of lipid metabolism-related genes such as PPARγand Fabp4.

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO_(4) electrodes

Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental pollution.In this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium extraction.The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent.This approach resulted in high lithium extraction efficiency and extended cycle life.When the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was utilized.Meanwhile,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance.When the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical performance.Furthermore,a self-designed,highly efficient,continuous lithium extraction device was constructed.The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device.This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.

Aqueous electrochemical delithiation of cathode materials as a strategy to selectively recover lithium from waste lithium-ion batteries

Lithium recovery from end-of-life Li-ion batteries(LIBs)through pyro-and hydrometallurgical recycling processes involves several refining stages,with high consumption of reagents and energy.A competitive technological alternative is the electrochemical oxidation of the cathode materials,whereby lithium can be deintercalated and transferred to an electrolyte solution without the aid of chemical extracting compounds.This article investigates the potential to selectively recover Li from LIB cathode materials by direct electrochemical extraction in aqueous solutions.The process allowed to recovering up to 98%of Li from high-purity commercial cathode materials(LiMn_(2)O_(4),LiCoO_(2),and Li Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2))with a faradaic efficiency of 98%and negligible co-extraction of Co,Ni,and Mn.The process was then applied to recover Li from the real waste LIBs black mass obtained by the physical treatment of electric vehicle battery packs.This black mass contained graphite,conductive carbon,and metal impurities from current collectors and steel cases,which significantly influenced the evolution and performances of Li electrochemical extraction.Particularly,due to concomitant oxidation of impurities,lithium extraction yields and faradaic efficiencies were lower than those obtained with high-purity cathode materials.Copper oxidation was found to occur within the voltage range investigated,but it could not quantitatively explain the reduced Li extraction performances.In fact,a detailed investigation revealed that above 1.3 V vs.Ag/Ag Cl,conductive carbon can be oxidized,contributing to the decreased Li extraction.Based on the reported experimental results,guidelines were provided that quantitatively enable the extraction of Li from the black mass,while preventing the simultaneous oxidation of impurities and,consequently,reducing the energy consumption of the proposed Li recovery method.

Environmental,economic and exergy analysis of separation of ternary azeotrope by variable pressure extractive distillation based on multi-objective optimization

In this work,the ternary azeotrope of tert-butyl alcohol/ethyl acetate/water is separated by extractive distillation(ED)to recover the available constituents and protect the environment.Based on the conductor like shielding model and relative volatility method,ethylene glycol was selected as the extractant in the separation process.In addition,in view of the characteristic that the relative volatility between components changes with pressure,the multi-objective optimization method based on nondominated sorting genetic algorithm II optimizes the pressure and the amount of solvent cooperatively to avoid falling into the optimal local solution.Based on the optimal process parameters,the proposed heat-integrated process can reduce the gas emissions by 29.30%.The heat-integrated ED,further coupled with the pervaporation process,can reduce gas emission by 42.36%and has the highest exergy efficiency of 47.56%.In addition,based on the heat-integrated process,the proposed two heat pump assisted heat-integrated ED processes show good economic and environmental performance.The double heat pump assisted heat-integrated ED can reduce the total annual cost by 28.78%and the gas emissions by 55.83%compared with the basis process,which has a good application prospect.This work provides a feasible approach for the separation of ternary azeotropes.

Combining Deep Learning with Knowledge Graph for Design Knowledge Acquisition in Conceptual Product Design

The acquisition of valuable design knowledge from massive fragmentary data is challenging for designers in conceptual product design.This study proposes a novel method for acquiring design knowledge by combining deep learning with knowledge graph.Specifically,the design knowledge acquisition method utilises the knowledge extraction model to extract design-related entities and relations from fragmentary data,and further constructs the knowledge graph to support design knowledge acquisition for conceptual product design.Moreover,the knowledge extraction model introduces ALBERT to solve memory limitation and communication overhead in the entity extraction module,and uses multi-granularity information to overcome segmentation errors and polysemy ambiguity in the relation extraction module.Experimental comparison verified the effectiveness and accuracy of the proposed knowledge extraction model.The case study demonstrated the feasibility of the knowledge graph construction with real fragmentary porcelain data and showed the capability to provide designers with interconnected and visualised design knowledge.