Modified DS np Chart Using Generalized Multiple Dependent State Sampling under Time Truncated Life Test

This study presents the design of a modified attributed control chart based on a double sampling(DS)np chart applied in combination with generalized multiple dependent state(GMDS)sampling to monitor the mean life of the product based on the time truncated life test employing theWeibull distribution.The control chart developed supports the examination of the mean lifespan variation for a particular product in the process of manufacturing.Three control limit levels are used:the warning control limit,inner control limit,and outer control limit.Together,they enhance the capability for variation detection.A genetic algorithm can be used for optimization during the in-control process,whereby the optimal parameters can be established for the proposed control chart.The control chart performance is assessed using the average run length,while the influence of the model parameters upon the control chart solution is assessed via sensitivity analysis based on an orthogonal experimental design withmultiple linear regression.A comparative study was conducted based on the out-of-control average run length,in which the developed control chart offered greater sensitivity in the detection of process shifts while making use of smaller samples on average than is the case for existing control charts.Finally,to exhibit the utility of the developed control chart,this paper presents its application using simulated data with parameters drawn from the real set of data.

基于TimeGAN数据增强的复杂过程故障分类方法

针对传统基于重构的故障分类方法在故障样本稀疏或失衡情况下效果不佳、故障子空间区分能力弱的问题,提出基于TimeGAN数据增强的复杂过程故障分类方法.针对小子样故障,使用TimeGAN对历史故障数据进行数据增强,生成与历史数据分布相似的虚拟故障样本;采用马氏距离评估虚拟样本的质量,剔除不可信样本,构造平衡的故障样本集.将故障样本映射到高维核空间,并在核空间中提取故障子空间.设计故障分类策略并定义4种故障分类性能评估指标以定量衡量算法的分类性能.Tennessee Eastman应用结果表明,所提数据增强方法可以有效扩充故障样本,进而提高故障重构率.与WGAN-GP和SMOTE方法进行对比,发现基于TimeGAN数据增强的故障分类方法具有更好的分类性能.

Feature extraction and damage alarming using time series analysis

Aiming at the problem of on-line damage diagnosis in structural health monitoring （SHM）, an algorithm of feature extraction and damage alarming based on auto-regressive moving-average （ARMA） time series analysis is presented. The monitoring data were first modeled as ARMA models, while a principalcomponent matrix derived from the AR coefficients of these models was utilized to establish the Mahalanobisdistance criterion functions. Then, a new damage-sensitive feature index DDSF is proposed. A hypothesis test involving the t-test method is further applied to obtain a decision of damage alarming as the mean value of DDSF had significantly changed after damage. The numerical results of a three-span-girder model shows that the defined index is sensitive to subtle structural damage, and the proposed algorithm can be applied to the on-line damage alarming in SHM.

Real-time Rescue Target Detection Based on UAV Imagery for Flood Emergency Response

Timely acquisition of rescue target information is critical for emergency response after a flood disaster.Unmanned Aerial Vehicles(UAVs)equipped with remote sensing capabilities offer distinct advantages,including high-resolution imagery and exceptional mobility,making them well suited for monitoring flood extent and identifying rescue targets during floods.However,there are some challenges in interpreting rescue information in real time from flood images captured by UAVs,such as the complexity of the scenarios of UAV images,the lack of flood rescue target detection datasets and the limited real-time processing capabilities of the airborne on-board platform.Thus,we propose a real-time rescue target detection method for UAVs that is capable of efficiently delineating flood extent and identifying rescue targets(i.e.,pedestrians and vehicles trapped by floods).The proposed method achieves real-time rescue information extraction for UAV platforms by lightweight processing and fusion of flood extent extraction model and target detection model.The flood inundation range is extracted by the proposed method in real time and detects targets such as people and vehicles to be rescued based on this layer.Our experimental results demonstrate that the Intersection over Union(IoU)for flood water extraction reaches an impressive 80%,and the IoU for real-time flood water extraction stands at a commendable 76.4%.The information on flood stricken targets extracted by this method in real time can be used for flood emergency rescue.

A simulation study of sampling time point designing for therapeutic drug monitoring based on a population pharmacokinetic model

Aim To develop a method to estimate population pharmacokinetic parameters with the limited sampling time points provided clinically during therapeutic drug monitoring. Methods Various simulations were attempted using a one-compartment open model with the first order absorption to determine PK parameter estimates with different sampling strategies as a validation of the method. The estimated parameters were further verified by comparing to the observed values. Results The samples collected at the single time point close to the non-informative sampling time point designed by this method led to bias and inaccurate parameter estimations. Furthermore, the relationship between the estimated non-informative sampling time points and the values of the parameter was examined. The non-informative sampling time points have been developed under some typical occasions and the results were plotted to show the tendency. As a result, one non-informative time point was demonstrated to be appropriate for clearance and two for both volume of distribution and constant of absorption in the present study. It was found that the estimates of the non-informative sampling time points developed in the method increase with increases of volume of distribution and the decrease of clearance and constant of absorption. Conclusion A rational sampling strategy during therapeutic drug monitoring can be established using the method present in the study.

Study on the Uncertainty of the Available Time Under Ship Fire Based on Monte Carlo Sampling Method

Available safety egress time under ship fire （SFAT） is critical to ship fire safety assessment, design and emergency rescue. Although it is available to determine SFAT by using fire models such as the two-zone fire model CFAST and the field model FDS, none of these models can address the uncertainties involved in the input parameters. To solve this problem, current study presents a framework of uncertainty analysis for SFAT. Firstly, a deterministic model estimating SFAT is built. The uncertainties of the input parameters are regarded as random variables with the given probability distribution functions. Subsequently, the deterministic SFAT model is employed to couple with a Monte Carlo sampling method to investigate the uncertainties of the SFAT. The Spearman＇s rank-order correlation coefficient （SRCC） is used to examine the sensitivity of each input uncertainty parameter on SFAT. To illustrate the proposed approach in detail, a case study is performed. Based on the proposed approach, probability density function and cumulative density function of SFAT are obtained. Furthermore, sensitivity analysis with regard to SFAT is also conducted. The results give a high-negative correlation of SFAT and the fire growth coefficient whereas the effect of other parameters is so weak that they can be neglected.

The Resident Time Distribution of Injected Dispersed Drops in Stirred Extraction Columns

A resident time model is proposed to evaluate the performance of agitated extraction columns. In this model, the resident time of dispersed drops is simulated with the discrete phase modeling, where the continuous phase and the dispersed phase （drops） are described by the single-phase Navier-Stokes （turbulence） model and Lagrangian model, respectively. The interaction of dispersed phase and continuous phase is neglected for the low concentration of drop in the cases studied. The statistical parameters of drops （the average resident time and standard deviation） under different operation conditions are computed for four columns. The relation of the above statistical parameters with the performance of columns is discussed and the criterions for an optimal compartment are outlined. Our results indicate that the resident time model is useful to evaluate the performance and optimize the design of extraction columns.

Feature Extraction and Recognition for Rolling Element Bearing Fault Utilizing Short-Time Fourier Transform and Non-negative Matrix Factorization

Due to the non-stationary characteristics of vibration signals acquired from rolling element bearing fault, thc time-frequency analysis is often applied to describe the local information of these unstable signals smartly. However, it is difficult to classitythe high dimensional feature matrix directly because of too large dimensions for many classifiers. This paper combines the concepts of time-frequency distribution（TFD） with non-negative matrix factorization（NMF）, and proposes a novel TFD matrix factorization method to enhance representation and identification of bearing fault. Throughout this method, the TFD of a vibration signal is firstly accomplished to describe the localized faults with short-time Fourier transform（STFT）. Then, the supervised NMF mapping is adopted to extract the fault features from TFD. Meanwhile, the fault samples can be clustered and recognized automatically by using the clustering property of NMF. The proposed method takes advantages of the NMF in the parts-based representation and the adaptive clustering. The localized fault features of interest can be extracted as well. To evaluate the performance of the proposed method, the 9 kinds of the bearing fault on a test bench is performed. The proposed method can effectively identify the fault severity and different fault types. Moreover, in comparison with the artificial neural network（ANN）, NMF yields 99.3% mean accuracy which is much superior to ANN. This research presents a simple and practical resolution for the fault diagnosis problem of rolling element bearing in high dimensional feature space.

ECCM scheme against interrupted sampling repeater jammer based on time-frequency analysis

The interrupted sampling repeater jamming（ISRJ） is an effective deception jamming method for coherent radar, especially for the wideband linear frequency modulation（LFM） radar. An electronic counter-countermeasure（ECCM） scheme is proposed to remove the ISRJ-based false targets from the pulse compression result of the de-chirping radar. Through the time-frequency（TF） analysis of the radar echo signal, it can be found that the TF characteristics of the ISRJ signal are discontinuous in the pulse duration because the ISRJ jammer needs short durations to receive the radar signal. Based on the discontinuous characteristics a particular band-pass filter can be generated by two alternative approaches to retain the true target signal and suppress the ISRJ signal. The simulation results prove the validity of the proposed ECCM scheme for the ISRJ.

A Novel Multiple Dependent State Sampling Plan Based on Time Truncated Life Tests Using Mean Lifetime

The design of a new adaptive version of the multiple dependent state(AMDS)sampling plan is presented based on the time truncated life test under the Weibull distribution.We achieved the proposed sampling plan by applying the concept of the double sampling plan and existing multiple dependent state sampling plans.A warning sign for acceptance number was proposed to increase the probability of current lot acceptance.The optimal plan parameters were determined simultaneously with nonlinear optimization problems under the producer’s risk and consumer’s risk.A simulation study was presented to support the proposed sampling plan.A comparison between the proposed and existing sampling plans,namely multiple dependent state(MDS)sampling plans and a modified multiple dependent state(MMDS)sampling plan,was considered under the average sampling number and operating characteristic curve values.In addition,the use of two real datasets demonstrated the practicality and usefulness of the proposed sampling plan.The results indicated that the proposed plan is more flexible and efficient in terms of the average sample number compared to the existing MDS and MMDS sampling plans.

Stability analysis of networked control systems with time-varying sampling periods

In this paper, we present an interval model of networked control systems with time-varying sampling periods and time-varying network-induced delays and discuss the problem of stability of networked control systems using Lyapunov stability theory. A sufficient stability condition is obtained by solving a set of linear matrix inequalities. In the end, the illustrative example demonstrates the correctness and effectiveness of the proposed approach.

Direct fitting measurement of gas content in coalbed and selection of reasonable sampling time

In this study, we selected 9 typical coal samples with different metamorphic grades as the study subjects,measured their initial 30-min gas desorption at 30℃ and different pressure using a self-developed gas adsorption/desorption device. Based on the characteristics of gas desorption from coal samples, we proposed a direct fitting method for measurement of gas content in coalbed, analyzed the effects of sampling time on the measurement results and determined the reasonable sampling time of coal samples with different metamorphic grades at different gas adsorption pressure at equilibrium. The results show that (1)the error of gas contents obtained using the direct fitting method relative to that obtained using indirect method is less than 10%, which meets the actual on-site requirements and verifies the feasibility of the direct fitting method;(2) when the relative error is controlled within ±10%, the reasonable sampling time of coal samples is linearly related to the gas adsorption pressure at equilibrium;(3) the reasonable sampling time of coal samples with the same metamorphic grade exhibits a shortening trend with increasing gas adsorption pressure at equilibrium;(4) for coal samples with similar gas adsorption pressure at equilibrium, the reasonable sampling time of coal samples displays a shortening trend with increasing metamorphic grade. Overall, the study provides a basis for improving the measurement accuracy of gas content in coalbed.

Weld extraction from real-time radiograph based on bidirectional accumulator Hough Transform

An effective approach is presented to extract welds from real-time radiographs, Firstly an algorithm based on an adaptive bidirectional threshold was proposed to segment the gradient image into ternary image, and then the bidirectional accumulator Hough Transform was developed to extract weld edges from the ternary image. Different values of the coefficient proposed in the threshold algorithm were tested, and the proposed approach was applied to extract welds from real-time radiographic images of different types of welds with defects. Results show that the proposed method is adaptive and effective to extract welds from real-time radiographs of linear welds.

New supervised learning classifiers for structural damage diagnosis using time series features from a new feature extraction technique

The motivation for this article is to propose new damage classifiers based on a supervised learning problem for locating and quantifying damage.A new feature extraction approach using time series analysis is introduced to extract damage-sensitive features from auto-regressive models.This approach sets out to improve current feature extraction techniques in the context of time series modeling.The coefficients and residuals of the AR model obtained from the proposed approach are selected as the main features and are applied to the proposed supervised learning classifiers that are categorized as coefficient-based and residual-based classifiers.These classifiers compute the relative errors in the extracted features between the undamaged and damaged states.Eventually,the abilities of the proposed methods to localize and quantify single and multiple damage scenarios are verified by applying experimental data for a laboratory frame and a four-story steel structure.Comparative analyses are performed to validate the superiority of the proposed methods over some existing techniques.Results show that the proposed classifiers,with the aid of extracted features from the proposed feature extraction approach,are able to locate and quantify damage;however,the residual-based classifiers yield better results than the coefficient-based classifiers.Moreover,these methods are superior to some classical techniques.

Cognitive MAC Protocol with Minimum Sampling Time and Cross-Layer Cooperation for Low Signal-to-Noise Ratio Environments

The previous Decentralised Cognitive Medium Access Control(DC-MAC) protocol allows Secondary Users(SUs) to independently search for spectrum access opportunities without the need for a central coordinator.DC-MAC assumes that the detection scheme is ideal at the Physical(PHY) layer.In fact,a more complex detection algorithm is impractical in distributed spectrum sharing scenarios.Energy Detection(ED) at the PHY layer has become the most common method because of its low computational and implementation complexities.Thus,it is essential to integrate the DC-MAC with ED at the PHY layer.However,ED requires the Minimum Sampling Time(MST)duration to achieve the target detection probability in low Signal-to-Noise Ratio(SNR)environments.Otherwise,it cannot achieve the expected detection performance.In this paper,we derive an accurate expression of MST for ED in low SNR environments.Then,we propose an Optimised DC-MAC(ODC-MAC) protocol which is based on MST,and which amends the aforementioned problems of DC-MAC with ED.Moreover,the closed-form expressions for the unreliable data transmission probability are derived for both DC-MAC and ODC-MAC.We show that the simulation results agree well with the theoretical analyses.The proposed ODC-MAC can improve the data transmission reliability and enhance the throughput compared to the performance of the traditional DC-MAC.

Time-Expanded Sampling for Ensemble-Based Filters:Assimilation Experiments with Real Radar Observations

By sampling perturbed state vectors from each ensemble prediction run at properly selected time levels in the vicinity of the analysis time, the recently proposed time-expanded sampling approach can enlarge the ensemble size without increasing the number of prediction runs and, hence, can reduce the computational cost of an ensemble-based filter. In this study, this approach is tested for the first time with real radar data from a tornadic thunderstorm. In particular, four assimilation experiments were performed to test the time-expanded sampling method against the conventional ensemble sampling method used by ensemble- based filters. In these experiments, the ensemble square-root filter （EnSRF） was used with 45 ensemble members generated by the time-expanded sampling and conventional sampling from 15 and 45 prediction runs, respectively, and quality-controlled radar data were compressed into super-observations with properly reduced spatial resolutions to improve the EnSRF performances. The results show that the time-expanded sampling approach not only can reduce the computational cost but also can improve the accuracy of the analysis, especially when the ensemble size is severely limited due to computational constraints for real-radar data assimilation. These potential merits are consistent with those previously demonstrated by assimilation experiments with simulated data.

Space-time Dynamics of Dendroctonus valens Population in China and Spatial Sampling Technique based on Its Spatial Distribution Pattern

Red turpentine beetle （RTB）, Dendroctongs valens LeConte, is a destructive forest invasive species in China, it mainly attacks Pings tabuliformis and P. bungeana. So far it has spread rapidly to the provinces of Shanxi, Hebei, Henan, Shanxi and Beijing since its first outbreak in Shanxi Province in 1998, and has caused extensive tree mortality. Space-time dynamics of D. valens population and spatial sampling technique based on its spatial distribution pattern were ana- lyzed using geostatistical methods in the pure P. tabuliforis forests and mixedwood stands which were at different damage levels. According to the spatial distribu- tion of D. valeas population, the specific spatial sampling technique was also studied, and then was compared with traditional sampling technique. The spatial sam- piing technique combined with sampling theory and the biological characteristics of D. valens population, which not only could calcnlate the error of the sampling, but also could discuss the optimal sampling number and the optimum size of plot according to different damage levels and different stand types. This helps to explain population expansion and colonization mechanism of D. valens, and to provide a good reference for adopting snitable control measures.

Noise reduction and periodic signal extraction for GNSS height data in the study of vertical deformation

Global navigation satellite system(GNSS)technique has irreplaceable advantages in the continuous monitoring of surface deformation.Reducing noise to improve the signal-to-noise ratio(SNR)and extract the concerned signals is of great significance.As an improved algorithm of empirical mode decomposition(EMD),complete ensemble empirical mode decomposition with adaptive noise(CEEMDAN)algorithm has better signal processing ability.Using the CEEMDAN algorithm,the height time series of 29GNSS stations in Chinese mainland were analyzed,and good denoising effects and extraction from periodic signals were achieved.The numerical results showed that the annual signal obtained with the CEEMDAN algorithm was significantly based on Lomb_Scargle spectrum analysis,and large differences in the long-term signals were found between the stations at different locations in Chinese mainland.With respect to data denoising,compared with the EMD and wavelet denoising algorithms,the CEEMDAN algorithm respectively improved the SNR by 29.35% and 36.54%,increased the correlation coefficient by 8.67% and 11.96%,and reduced root mean square error(RMSE)by 44.68% and 43.48%,indicating that the CEEMDAN algorithm had better denoising behavior than the other two algorithms.In addition,the results demonstrated that different denoising methods had little influence on estimating the annual vertical deformation velocity.The extraction of periodic signals showed that more components were retained by using the CEEMDAN algorithm than the EMD algorithm,which indicated that the CEEMDAN algorithm had advantages over frequency aliasing.In conclusion,the CEEMDAN algorithm was recommended for processing the GNSS height time series to analyze the vertical deformation due to its excellent features of denoising and the extraction of periodic signals.

AUTO-EXTRACTING TECHNIQUE OF DYNAMIC CHAOS FEATURES FOR NONLINEAR TIME SERIES

The main purpose of nonlinear time series analysis is based on the rebuilding theory of phase space, and to study how to transform the response signal to rebuilt phase space in order to extract dynamic feature information, and to provide effective approach for nonlinear signal analysis and fault diagnosis of nonlinear dynamic system. Now, it has already formed an important offset of nonlinear science. But, traditional method cannot extract chaos features automatically, and it needs man＇s participation in the whole process. A new method is put forward, which can implement auto-extracting of chaos features for nonlinear time series. Firstly, to confirm time delay r by autocorrelation method; Secondly, to compute embedded dimension m and correlation dimension D; Thirdly, to compute the maximum Lyapunov index λmax; Finally, to calculate the chaos degree Dch of Poincare map, and the non-circle degree Dnc and non-order degree Dno of quasi-phase orbit. Chaos features extracting has important meaning to fault diagnosis of nonlinear system based on nonlinear chaos features. Examples show validity of the proposed method.