The results of an investigation into the effects of various finishing processes on the propertiesof cotton rich mans shirting fabrics are presented and discussed.The KES-FB system was used forthe testing of fabric mec...The results of an investigation into the effects of various finishing processes on the propertiesof cotton rich mans shirting fabrics are presented and discussed.The KES-FB system was used forthe testing of fabric mechanical properties.It is concluded that mercerising cotton rich fabrics is nota cost effective finish process while the optimisation of the bleaching process may bring more bene-fit.The investigation is part of a long term program aimed at the development of an expert systemfor total fabric engineering.展开更多
In this paper,the wrinkle resistant finishing of cotton fabric with the complex system of PBTCA and CA was mainly discussed.The influence of finishing conditions such as the amount of finishing agent and catalyst,curi...In this paper,the wrinkle resistant finishing of cotton fabric with the complex system of PBTCA and CA was mainly discussed.The influence of finishing conditions such as the amount of finishing agent and catalyst,curing temperature and curing time were studied.Wrinkle recovery angle(WRA),breaking strength(BS) and whiteness(Wh) of finished fabric were measured.The experimental data indicated that the best finishing conditions were PBTCA 120g/L,CA 50g/L,sodium hypophosphite 50g/L,triethanolamine 20g/L,cured 170℃ for 120s.展开更多
A series of hydrolyzed poly(maleic anhydride)(HPMA) is synthesized by using maleic anhydride as the monomer and hydrogen peroxide as the initiator.The effects of reaction temperature,reaction time period and amount of...A series of hydrolyzed poly(maleic anhydride)(HPMA) is synthesized by using maleic anhydride as the monomer and hydrogen peroxide as the initiator.The effects of reaction temperature,reaction time period and amount of initiator on the double bond residue in the products are studied to decide a suitable synthesizing process.Thepreferable amount of the initiator is 50 wt％,and thepolymerization should be carried out at 105℃ for two hours.Cotton fabrics are finished with the synthesized products and several commercial HPMAs,respectively.And the performance properties of the finished fabrics are compared.The fabric finished with the synthetic HP-MA using the above-mentioned synthesizing process isimparted a high wrinkle recovery angle.展开更多
The combustion mechanisms of PP / Viscose blend fabrics are briefly discussed, and the factors affecting flame retarding(FR) effect are analyzed. Apart from this, the choice of processes of FR finish is also discussed...The combustion mechanisms of PP / Viscose blend fabrics are briefly discussed, and the factors affecting flame retarding(FR) effect are analyzed. Apart from this, the choice of processes of FR finish is also discussed in this paper. Other factors such as coating add-on, curing temperature and time are studied too. The results show that the factors above all have different extent of influence upon FR effect.展开更多
This study demonstrated that the variation in physical and chemical performance on cotton double jersey knit fabrics was decided by the knit structure, water repellent chemicals types and their concentration. Here, tw...This study demonstrated that the variation in physical and chemical performance on cotton double jersey knit fabrics was decided by the knit structure, water repellent chemicals types and their concentration. Here, two types of double jersey fabrics were treated with different types of water repellent chemicals at different formulations to evaluate the performance of water repellent finishes on knit fabrics properties. The levels of water repellency of the fabrics were assessed by AATCC 127 hydrostatic head test method and by ISO 4920:2012 spray rating test method. To evaluate the performance of water repellent finishes on knit fabric properties, GSM, bursting strength test according to ASTM (D 3786-87) method, air permeability, color fastness to wash, water, perspiration, chlorinated water and color fastness to rubbing with ISO method were done. The results showed that both physical and chemical properties of the finished cotton knits, depend to a great extent on knit structure, the water repellent finish type and concentration to obtain water repellent fabrics with desirable properties.展开更多
This study demonstrated that the changes in functional properties of both woven and knit cotton fabrics were determined to evaluate the performance of different special finishes. Here, 100% cotton fabrics were treated...This study demonstrated that the changes in functional properties of both woven and knit cotton fabrics were determined to evaluate the performance of different special finishes. Here, 100% cotton fabrics were treated with different types of finishing chemicals at different formulations. To assess the performance of different finishes on fabric properties, GSM, bursting strength, tensile strength, dimensional stability, absorbency, crease recovery angle with ASTM and AATCC methods were done. The results showed that the functional properties of the finished cotton fabrics both woven and knit depend to a great extent on the type of finish.展开更多
Through the silver fiber and cotton mixed silver fiber shielding fabric,not only soft and comfortable,it can wear personal,but also has excellent anti electromagnetic shielding effect. Fabric in dyeing and finishing p...Through the silver fiber and cotton mixed silver fiber shielding fabric,not only soft and comfortable,it can wear personal,but also has excellent anti electromagnetic shielding effect. Fabric in dyeing and finishing process,may cause some damage on the silver fiber,influence the shielding performance of shielding fabric. Therefore,in this paper,through the experimental and analysis,find dyeing and finishing process may affect silver fiber shielding fabric and the reasons.展开更多
A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and t...A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and the bacteriostatic finishing agent named SFR-1 wassynthesized.The flame retardancy of the fabric finishedcan meet the DOC FF3-71 Children Sleepwear Stan-dard.Its bacterial inhibiting capacity can meet and ex-ceed the requirements of similar products展开更多
The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure w...The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure water treated fabrics like drape coefficient, air permeability, tenacity are also presented.展开更多
In the paper, the effects of reducing hairfalling and pilling were compared in rabbit hair/woolworsted knitwear by adding various finishing agents. Reducing rates of hairfalling and pilling wereof 6.7％—66.7％ and 9....In the paper, the effects of reducing hairfalling and pilling were compared in rabbit hair/woolworsted knitwear by adding various finishing agents. Reducing rates of hairfalling and pilling wereof 6.7％—66.7％ and 9.3％—73.5％ respectively, while fabric handle changed from grade 1 to grade5 in 12 treating method groups. To evaluate the severity of hairfalling and pilling and the conditionof fabric handle of knitwear objectively, quantitatively and comprehensively, we advocated usingthe concept of "geueral evaluating value(GEV)". The results indicated that GEVs of acrylategroups were low, but GEVs of silicone resin groups were high, especially the group with finishingagent solution containing 7％ silicone resin No.3 in which reducing rates of pilling and hairfallingwere of 53％ (National standard: grade 4.5) and 62％, respectively, and washing stability was verygood, while knitwear’s fabric handle almost did not change.展开更多
Medical compression hosiery based on polyurethane and polyamide covered yarns was treated with two antibacterial agents,SCJ-891 and SCJ-963, to investigate their antimicrobial performance. Various parameters of finish...Medical compression hosiery based on polyurethane and polyamide covered yarns was treated with two antibacterial agents,SCJ-891 and SCJ-963, to investigate their antimicrobial performance. Various parameters of finishing process, including concentration,temperature,pH and liquor ratio,were studied in the single factor and orthogonal experiments. ANOVA analysis indicated that all of these four variables played important roles in antimicrobial efficacy. Different combinations of finishing parameters gave different antimicrobial efficacies against both gram positive bacteria Staphylococcus aureus( S. aureus) and gram negative bacteria Escherichia coli( E. coli). SCJ-963 treated fabric had better antibacterial efficacy when compared with that of SCJ-963 treated yarn. Meanwhile both SCJ-963 treated fabric and yarn showed better antibacterial efficacy when compared with SCJ-891 treated fabric and yarn. The optimized parameters for SCJ-891 treated fabric against S. aureus( A: 86%) were a liquor ratio of 1: 20,a concentration of 10% of weight of fabric,pH of 4. 5 and a temperature of 99℃; the optimized parameters for SCJ-963 treated fabric against S. aureus( A: 83%) were a liquor ratio of 1: 15,a concentration of 10% of weight of fabric, a pH of 5 and a temperature of 99℃. Furthermore, two kinds of antimicrobial finishing of the fabric had good resistance to 50 times washing. This study concluded that SCJ-891 and SCJ-963 were compatible to be used in medical compression hosiery.展开更多
In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can...In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can satisfy the machine washable requirement formulated byI.W.S..Resin M is a good agent for antifelting treatment of wool fabrics with proper pretreatment.Oxidant A/Resin M treatment has little influence on dyeing and moisture adsorption properties ofwool fibers.The pilling resistance of the treated fabrics is higher than that of the untreated ones.The strength and the handle of the treated fabrics have little been changed.According to thescanning electron microscope observations,it is recommended that the polymer encapsulation ofindividual fiber also plays an important role in the felting resistance of the treated fabrics though itis well known that the shrink resistance of the treated fabrics is believed to be due to the binding offibers.展开更多
Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing ope...Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing operations. So, several treatment processes, including enzymatic, bleaching, singeing, heat set, and ozone finish, are used, which made this processing more energy consumption and time-consuming. Therefore, it is significant to investigate how changing the chemicals and raw ingredients could improve the finishing process, which is environmentally and economically beneficial for sustainable production practices in the denim finishing process. This study’s research design comprises an experimental investigation in a denim plant in Bangladesh. Two different fabrics were chosen to analyze, determining the potential savings of finishing on the denim fabrics’ performance characteristics. By deducting singeing and heat-set processes, the researchers ran an experimental process by maintaining the same length of fabric. Then, the impacts of finishing process optimization on the mechanical, thermal, and comfort parameters of drape, stiffness, and tear strength were examined. The study’s findings demonstrated that this experiment increased productivity and reduced the finishing unit’s energy consumption without compromising the denim fabrics’ quality. This study significantly impacts environmental sustainability by preserving limited energy resources and manufacturing denim finishing processes.展开更多
文摘The results of an investigation into the effects of various finishing processes on the propertiesof cotton rich mans shirting fabrics are presented and discussed.The KES-FB system was used forthe testing of fabric mechanical properties.It is concluded that mercerising cotton rich fabrics is nota cost effective finish process while the optimisation of the bleaching process may bring more bene-fit.The investigation is part of a long term program aimed at the development of an expert systemfor total fabric engineering.
文摘In this paper,the wrinkle resistant finishing of cotton fabric with the complex system of PBTCA and CA was mainly discussed.The influence of finishing conditions such as the amount of finishing agent and catalyst,curing temperature and curing time were studied.Wrinkle recovery angle(WRA),breaking strength(BS) and whiteness(Wh) of finished fabric were measured.The experimental data indicated that the best finishing conditions were PBTCA 120g/L,CA 50g/L,sodium hypophosphite 50g/L,triethanolamine 20g/L,cured 170℃ for 120s.
文摘A series of hydrolyzed poly(maleic anhydride)(HPMA) is synthesized by using maleic anhydride as the monomer and hydrogen peroxide as the initiator.The effects of reaction temperature,reaction time period and amount of initiator on the double bond residue in the products are studied to decide a suitable synthesizing process.Thepreferable amount of the initiator is 50 wt％,and thepolymerization should be carried out at 105℃ for two hours.Cotton fabrics are finished with the synthesized products and several commercial HPMAs,respectively.And the performance properties of the finished fabrics are compared.The fabric finished with the synthetic HP-MA using the above-mentioned synthesizing process isimparted a high wrinkle recovery angle.
文摘The combustion mechanisms of PP / Viscose blend fabrics are briefly discussed, and the factors affecting flame retarding(FR) effect are analyzed. Apart from this, the choice of processes of FR finish is also discussed in this paper. Other factors such as coating add-on, curing temperature and time are studied too. The results show that the factors above all have different extent of influence upon FR effect.
文摘This study demonstrated that the variation in physical and chemical performance on cotton double jersey knit fabrics was decided by the knit structure, water repellent chemicals types and their concentration. Here, two types of double jersey fabrics were treated with different types of water repellent chemicals at different formulations to evaluate the performance of water repellent finishes on knit fabrics properties. The levels of water repellency of the fabrics were assessed by AATCC 127 hydrostatic head test method and by ISO 4920:2012 spray rating test method. To evaluate the performance of water repellent finishes on knit fabric properties, GSM, bursting strength test according to ASTM (D 3786-87) method, air permeability, color fastness to wash, water, perspiration, chlorinated water and color fastness to rubbing with ISO method were done. The results showed that both physical and chemical properties of the finished cotton knits, depend to a great extent on knit structure, the water repellent finish type and concentration to obtain water repellent fabrics with desirable properties.
文摘This study demonstrated that the changes in functional properties of both woven and knit cotton fabrics were determined to evaluate the performance of different special finishes. Here, 100% cotton fabrics were treated with different types of finishing chemicals at different formulations. To assess the performance of different finishes on fabric properties, GSM, bursting strength, tensile strength, dimensional stability, absorbency, crease recovery angle with ASTM and AATCC methods were done. The results showed that the functional properties of the finished cotton fabrics both woven and knit depend to a great extent on the type of finish.
文摘Through the silver fiber and cotton mixed silver fiber shielding fabric,not only soft and comfortable,it can wear personal,but also has excellent anti electromagnetic shielding effect. Fabric in dyeing and finishing process,may cause some damage on the silver fiber,influence the shielding performance of shielding fabric. Therefore,in this paper,through the experimental and analysis,find dyeing and finishing process may affect silver fiber shielding fabric and the reasons.
基金The project serial number 92B0716Shanghai Natural Science Foundation
文摘A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and the bacteriostatic finishing agent named SFR-1 wassynthesized.The flame retardancy of the fabric finishedcan meet the DOC FF3-71 Children Sleepwear Stan-dard.Its bacterial inhibiting capacity can meet and ex-ceed the requirements of similar products
文摘The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure water treated fabrics like drape coefficient, air permeability, tenacity are also presented.
文摘In the paper, the effects of reducing hairfalling and pilling were compared in rabbit hair/woolworsted knitwear by adding various finishing agents. Reducing rates of hairfalling and pilling wereof 6.7％—66.7％ and 9.3％—73.5％ respectively, while fabric handle changed from grade 1 to grade5 in 12 treating method groups. To evaluate the severity of hairfalling and pilling and the conditionof fabric handle of knitwear objectively, quantitatively and comprehensively, we advocated usingthe concept of "geueral evaluating value(GEV)". The results indicated that GEVs of acrylategroups were low, but GEVs of silicone resin groups were high, especially the group with finishingagent solution containing 7％ silicone resin No.3 in which reducing rates of pilling and hairfallingwere of 53％ (National standard: grade 4.5) and 62％, respectively, and washing stability was verygood, while knitwear’s fabric handle almost did not change.
基金"Biomedical Textile Science and Technology"111 Project of Ministry of Education,China(No.B07024)
文摘Medical compression hosiery based on polyurethane and polyamide covered yarns was treated with two antibacterial agents,SCJ-891 and SCJ-963, to investigate their antimicrobial performance. Various parameters of finishing process, including concentration,temperature,pH and liquor ratio,were studied in the single factor and orthogonal experiments. ANOVA analysis indicated that all of these four variables played important roles in antimicrobial efficacy. Different combinations of finishing parameters gave different antimicrobial efficacies against both gram positive bacteria Staphylococcus aureus( S. aureus) and gram negative bacteria Escherichia coli( E. coli). SCJ-963 treated fabric had better antibacterial efficacy when compared with that of SCJ-963 treated yarn. Meanwhile both SCJ-963 treated fabric and yarn showed better antibacterial efficacy when compared with SCJ-891 treated fabric and yarn. The optimized parameters for SCJ-891 treated fabric against S. aureus( A: 86%) were a liquor ratio of 1: 20,a concentration of 10% of weight of fabric,pH of 4. 5 and a temperature of 99℃; the optimized parameters for SCJ-963 treated fabric against S. aureus( A: 83%) were a liquor ratio of 1: 15,a concentration of 10% of weight of fabric, a pH of 5 and a temperature of 99℃. Furthermore, two kinds of antimicrobial finishing of the fabric had good resistance to 50 times washing. This study concluded that SCJ-891 and SCJ-963 were compatible to be used in medical compression hosiery.
文摘In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can satisfy the machine washable requirement formulated byI.W.S..Resin M is a good agent for antifelting treatment of wool fabrics with proper pretreatment.Oxidant A/Resin M treatment has little influence on dyeing and moisture adsorption properties ofwool fibers.The pilling resistance of the treated fabrics is higher than that of the untreated ones.The strength and the handle of the treated fabrics have little been changed.According to thescanning electron microscope observations,it is recommended that the polymer encapsulation ofindividual fiber also plays an important role in the felting resistance of the treated fabrics though itis well known that the shrink resistance of the treated fabrics is believed to be due to the binding offibers.
文摘Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing operations. So, several treatment processes, including enzymatic, bleaching, singeing, heat set, and ozone finish, are used, which made this processing more energy consumption and time-consuming. Therefore, it is significant to investigate how changing the chemicals and raw ingredients could improve the finishing process, which is environmentally and economically beneficial for sustainable production practices in the denim finishing process. This study’s research design comprises an experimental investigation in a denim plant in Bangladesh. Two different fabrics were chosen to analyze, determining the potential savings of finishing on the denim fabrics’ performance characteristics. By deducting singeing and heat-set processes, the researchers ran an experimental process by maintaining the same length of fabric. Then, the impacts of finishing process optimization on the mechanical, thermal, and comfort parameters of drape, stiffness, and tear strength were examined. The study’s findings demonstrated that this experiment increased productivity and reduced the finishing unit’s energy consumption without compromising the denim fabrics’ quality. This study significantly impacts environmental sustainability by preserving limited energy resources and manufacturing denim finishing processes.
