In order to prepare cellulose nanocrystals( CNCs)-coated polylactide( PLA) microspheres for the use of drug delivery and tissue engineering,a Pickering emulsion route was applied. The stable Pickering emulsions were p...In order to prepare cellulose nanocrystals( CNCs)-coated polylactide( PLA) microspheres for the use of drug delivery and tissue engineering,a Pickering emulsion route was applied. The stable Pickering emulsions were prepared using CNCs as efficient stabilizers without any additional surfactant. The microspheres were successfully fabricated after volatilization of the solvent. What's more,the size of microspheres could be controlled by fabrication parameters.展开更多
In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of ma...In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of matrix PSCs still reaches about 1.82%,and especially the current density achieves nearly 20 m A/cm2.The results verify that air-brush spray deposition is a suitable method to prepare large area PSC devices,and the process we use in this paper can be easily transplanted to roll-to-roll production.展开更多
In this article, nano-scale Al/Fe2O3 composites with different morphologies were successfully obtained by a simple electrospinning technique, which is based on a surfactant（polyvinyl pyridine, PVP） in a mixture of N...In this article, nano-scale Al/Fe2O3 composites with different morphologies were successfully obtained by a simple electrospinning technique, which is based on a surfactant（polyvinyl pyridine, PVP） in a mixture of N,N-dimethylformamide（DMF） and 2-propanol. The electrospun Al/Fe2O3 composites exhibited a crystal structure and phase composition by X-ray diffraction analysis. The different morphologies of the Al/Fe2O3 composites were also observed through scanning electron microscopy and transmission electron microscopy. It was found that the rather simple electrospinning method used to prepare the morphology-controlled Al/Fe2O3 composites may have the potential for preparation of propellants, explosives, and pyrotechnics in the future.展开更多
基金National Key Technology R&D Program of China(No.2014BAC13B02)National Natural Science Foundation of China(No.51403035)+1 种基金Programme of Introducing Talents of Discipline to Universities,China(No.105-07-005735)the Fundamental Research Funds for the Central Universities,China(No.15D110510)
文摘In order to prepare cellulose nanocrystals( CNCs)-coated polylactide( PLA) microspheres for the use of drug delivery and tissue engineering,a Pickering emulsion route was applied. The stable Pickering emulsions were prepared using CNCs as efficient stabilizers without any additional surfactant. The microspheres were successfully fabricated after volatilization of the solvent. What's more,the size of microspheres could be controlled by fabrication parameters.
基金supported by the National Natural Science Foundation of China(No.61274063)
文摘In this paper,a 64 mm×64 mm matrix polymer solar cell(PSC) was fabricated by air-brush spray deposition.Although the open-circuit voltage(Voc) and the fill factor(FF) both need to be improved,the efficiency of matrix PSCs still reaches about 1.82%,and especially the current density achieves nearly 20 m A/cm2.The results verify that air-brush spray deposition is a suitable method to prepare large area PSC devices,and the process we use in this paper can be easily transplanted to roll-to-roll production.
文摘In this article, nano-scale Al/Fe2O3 composites with different morphologies were successfully obtained by a simple electrospinning technique, which is based on a surfactant（polyvinyl pyridine, PVP） in a mixture of N,N-dimethylformamide（DMF） and 2-propanol. The electrospun Al/Fe2O3 composites exhibited a crystal structure and phase composition by X-ray diffraction analysis. The different morphologies of the Al/Fe2O3 composites were also observed through scanning electron microscopy and transmission electron microscopy. It was found that the rather simple electrospinning method used to prepare the morphology-controlled Al/Fe2O3 composites may have the potential for preparation of propellants, explosives, and pyrotechnics in the future.
