Review on Development of Pressure Injury Prevention Fabric

Pressure injury is a common postoperative complication of wheelchair users. It has a high incidence rate and can induce sepsis and even death. The fabrics that touch patients’ skin directly have a profound impact on their skin surfaces. This review summarizes the research in the last five years on the relationship between pressure injuries and fabrics. Following the preferred reporting items for systematic reviews and meta-analyses(PRISMA) statement, a systematic literature search is conducted in nine databases, including SCI(Web of Science), IEEE, ASTM, Taylor & Francis, ProQuest, Wiley, SpringerLink, PubMed and SAGE. The research objects, experimental equipment and survey results are investigated in this review, in which twenty-four different textiles and seven different test methodologies are involved. The test methodologies include five kinds of performance tests and two kinds of observational studies. Two studies showed that the particular fabric was helpful to reduce the pressure on the skin surface, and twelve studies revealed that the multi-layer fabric with good air permeability, heat dissipation and moisture dissipation was helpful to prevent pressure injury. This review confirms the correlation between the fabric properties and the occurrence of postoperative pressure injury in wheelchair users. Further experiments are needed to reasonably integrate the fabric characteristics of pressure injury prevention into the mass-produced pressure injury prevention clothes for wheelchair users.

Effect of Twisted Fiber on Flexural Property and Microstructure of Woven Fabric Reinforced Composite

Two kinds of 2.5D deep straight-joint structure ultra-high molecular weight polyethylene（UHMWPE）（twisted and original） fibers woven fabric reinforced epoxy resin composites were prepared by the hand lay-up method. Subsequently, the flexural property, microstructures, and failure mechanisms of the composites were also investigated. The average flexural strength of 2.5D deep bend-joint structure twisted fiber and original fiber woven fabric composites were 176.66 MPa and 204.45 MPa, respectively. The results of the characteristics indicated that the twist was the main factor which affected the flexural performance. Flexural property vitally relied on the strength of the fiber itself. Twist decreased the strength of the yarns, which meant that when the mechanical property of woven fabric reinforced composites was improved, the yarns must be kept straight in the woven fabric. The study are extremely valuable to guide the improvement of the mechanical property of the woven fabric reinforced composites.

Electricity Generation from Heatwaves

We chose a definition of heatwaves (HWs) that has ~4-year recurrence frequency at world hot spots. We first examined the 1940-2022 HWs climatology and trends in lifespan, severity, spatial extent, and recurrence frequency. HWs are becoming more frequent and more severe for extratropical mid- and low-latitudes. To euphemize HWs, we here propose a novel clean energy-tapping concept that utilizes the available nano-technology, micro-meteorology knowledge of temperature distribution within/without buildings, and radiative properties of earth atmosphere. The key points for a practical electricity generation scheme from HWs are defogging, insulation, and minimizing the absorption of infrared downward radiation at the cold legs of the thermoelectric generators. One sample realization is presented which, through relay with existing photovoltaic devices, provides all-day electricity supply sufficient for providing air conditioning requirement for a residence (~2000-watt throughput). The provision of power to air conditioning systems, usually imposes a significant stress on traditional city power grids during heatwaves.

Fabrics and Seismic Properties of Ophiolites: Implications for Mantle Flow

Based on ophiolite sequences,seismic velocities of rocks and seismic profiles of ocean basins,the oceanic crust-mantle boundary can be defined as the contact between the solid,ductile deformed mantle and the

Draping Behavior of Carbon Non-Crimp Fabrics and Its Effects on Mechanical Performance of the Hemispherical Composites

In order to investigate the draping behavior of non-crimp fabrics（NCFs）, two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The shear angle and forming defects of the fabrics were measured on the hemisphere, under different blank holder forces（BHFs）. The results showed that increasing BHF could enhance the shear angle slightly, reduce the asymmetry for the deformation of the fabrics, and change the main type of the process-induced defects. Besides, compression tests were performed on the corresponding composite components. By analyzing the change of fiber volume fraction and structural parameters of the textile reinforcements, the effects of draping behavior of NCFs on the mechanical performance of the composites were studied. The results reveal that draping process has distinguishable impacts on the mechanical properties of the final components, which is closely related to the stitching pattern of the NCFs.

Optical property of an antireflection coating fabricated by an optimal spin-coating method with a pH-modified SiO2 nanoparticle solution

An antireflection （AR） coating is fabricated by applying an optimal spin-coating method and a pH-modified SiO2 nanoparticle solution on a cover glass. Because the pH value of the solution will affect the aggregation and dispersion of the SiO2 particles, the transmittance of the AR-treated cover glass will be enhanced under optimal fabricated conditions. The experimental results show that an AR coating fabricated by an SiO2 nano- particle solution of pH 11 enhances the transmittance approximately by 3% and 5% under normal and oblique incident conditions, respectively. Furthermore, the AR-treated cover glass exhibits hydrophobicity and shows a 65% enhancement at a contact angle to bare glass.

Fabrication and Lasing Property of Yb^(3+)-doped Double-Clad Fibers with Novel Inner Cladding

The Yb3+-doped double-clad fibers with novel inner cladding have been made by using MCVD process, solution-doping method and optical machining together. The laser power and slope efficiency of the fiber lasers are higher than 1.8W and 50% respectively.

Reply to Comments on "Structural,Optical,and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique'' by K.Usharani and A.R.Balu published in Acta Metall.Sin.(Engl.Lett.) 28(1),64–71(2015)

Following are the comments for the queries raised by Prof. Pawel E. Tomaszewski on our published paper entitled ＂Structural, Optical, and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique＂ by K. Usharani and A.R. Balu published in Acta Metall. Sin.

Fabrication and properties of tape-casting transparent Ho:Y_3Al_5O_(12) ceramic

High-quality holmium-doped Y3Al5O12 （YAG） ceramic is fabricated in sequence by tape-casting and vacumn sintering. Tile average grain size of the Ho：YAG ceramic is around 20μm with a flllly dense microstructure. The inlinc transmittance of the sample is -82% in visible and IR region. The fluorescence lift, time at 2088 mn is 8.17 ms. The excellent properties of the Ho：YAG ceramic demonstrate the tape-casting is a novel candidate process for the fabrication of Ho：YAG-based thin-chip or composite ceramics.

Comments on "Structural,Optical,and Electrical Properties of Zn-Doped CdO Thin Films Fabricated by a Simplified Spray Pyrolysis Technique'' by K.Usharani and A.R.Balu Published in Acta Metall.Sin.(Engl.Lett.) 28(1),64–71(2015)

The commented paper [1] presents the results on structural, optical, and electrical properties of Zn-doped CdO thin films. Unfortunately, there are several mistakes and errors not found by any of referees. It is necessary to show these mistakes or misleading statements to avoid their use in the future papers by authors and other peoples.

Analytical Solution for Predicting In-plane Elastic Shear Properties of 2D Orthogonal PWF Composites

This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional（2D） plain weave fabric（PWF） composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.