Factorial Experimental Design to Study the Effects of Layers and Fiber Content on Concrete Flexural Behavior

Experimentation has come a long in helping researchers achieve breakthroughs in their different scientific areas and engineering happens to be one of those areas with the most impact from experimental advancement. The need for valid experimental results free from biases and confounding conclusions has prompted the development of new experimental techniques that takes consideration of all applicable factor and combinations in providing answers on a research topic, and the Factorial Experimental design credited to Sir Ronald Fisher is one technique yielding highly valid results. This paper uses the factorial design of experiments to research the flexural impact of polyvinyl acetate fiber and layered concrete in construction. The experiment considered two levels of fiber contents and two levels of layers, and prepared samples with all combinations of the variable factors. The samples were tested after 7 days from casting for flexural strength and an advance statistical analysis was performed on the flexural responses of the samples using R-program. The results from the analyses revealed the significance of the variables to the flexural strength of the samples, as well as their interactions. The experiment concluded that based on the number of layers and fiber content used for the experiment, casting concrete in layers does have a significant negative effect on the flexural strength of concrete, and the failure pattern of concrete members under flexural load in evidently influenced by the material composition of the concrete, and that it can be evidently influenced by casting the concrete in layers.

Kinetics of phenol and m-cresol biodegradation by an indigenous mixed microbial culture isolated from a sewage treatment plant

An acclimatized mixed microbial culture,predominantly Pseudomonas sp.,was enriched from a sewage treatment plant,and its potential to simultaneously degrade mixtures of phenol and m-cresol was investigated during its growth in batch shake flasks.A 22 full factorial design with the two substrates at two different levels and different initial concentration ranges(low and high),was employed to carry out the biodegradation experiments.The substrates phenol and m-cresol were completely utilized within 21 h when ...

Experimental investigation and prediction of tribological behavior of unidirectional short castor oil fiber reinforced epoxy composites

The present study aims at introducing a newly developed natural fiber called castor oil fiber,termed ricinus communis,as a possible reinforcement in tribo-composites.Unidirectional short castor oil fiber reinforced epoxy resin composites of different fiber lengths with 40%volume fraction were fabricated using hand layup technique.Dry sliding wear tests were performed on a pin-on-disc tribometer based on full factorial design of experiments(DoE)at four fiber lengths(5,10,15,and 20 mm),three normal loads(15,30,and 45 N),and three sliding distances(1,000,2,000,and 3,000 m).The effect of individual parameters on the amount of wear,interfacial temperature,and coefficient of friction was studied using analysis of variance(ANOVA).The composite with 5 mm fiber length provided the best tribological properties than 10,15,and 20 mm fiber length composites.The worn surfaces were analyzed under scanning electron microscope.Also,the tribological behavior of the composites was predicted using regression,artificial neural network(ANN)-single hidden layer,and ANN-multi hidden layer models.The confirmatory test results show the reliability of predicted models.ANN with multi hidden layers are found to predict the tribological performance accurately and then followed by ANN with single hidden layer and regression model.