Some properties on far-field pattern of scattering by penetrable obstacle in ocean waveguide

This paper is concerned with the properties of propagation fax-field patterns corresponding to the scattering of time harmonic acoustic waves by a bounded penetrable obstacle in an ocean waveguide. The sets of solutions to the transmission problem are constructed such that the restriction of these solutions to the boundary of the penetrable obstacle is dense in a Hilbert space. Then conditions under which a set of propagation far-field patterns is complete in a Hilbert space are determined. These properties are important in investigating inverse transmission problems in an ocean waveguide.

Hydrothermal Synthesis and Field Enhancement Behavior of ZnO Nanorods Pattern

We provide a new way to prepare ZnO nanorods pattern from the solution composed of hexamethylenetetramine （HMT） and Zn（NO3）2. The substrate is ITO substrate covered by well ordered Au islands. Since Au and the underneath ITO substrate have two different nucleation rates in the initial stage of heterogeneous nucleation process, the subsequent ZnO growth on the quick nucleating area takes place under diffusion control and is able to confine the synthesis of ZnO nanorods to specific locations. The concentrations of zinc nitrate and HMT are well adjusted to show the possibility of the new route for the patterning of the ZnO nanorods. Furthermore, the nanorods pattern was characterized by X-ray diffraction and photoluminescence and the performance of field emission property from ZnO nanorod patterns was investigated. The ZnO nanorods pattern with a good alignment also shows a good field enhancement behavior with a high value of the field enhancement factor.

Active Faulting Pattern,Present-day Tectonic Stress Field and Block Kinematics in the East Tibetan Plateau

This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10--14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low （2-4 mm/a） and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7-9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and theologically layered. The upper crust seems to be decoupled from the lower crust through a decollement zone at a depth of 15-20 kin, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this decollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.

A numerical study on pattern selection in crystal growth by using anisotropic lattice Boltzmann-phase field method

Pattern selection during crystal growth is studied by using the anisotropic lattice Boltzmann-phase field model.In the model,the phase transition,melt flows,and heat transfer are coupled and mathematically described by using the lattice Boltzmann(LB)scheme.The anisotropic streaming-relaxation operation fitting into the LB framework is implemented to model interface advancing with various preferred orientations.Crystal pattern evolutions are then numerically investigated in the conditions of with and without melt flows.It is found that melt flows can significantly influence heat transfer,crystal growth behavior,and phase distributions.The crystal morphological transition from dendrite,seaweed to cauliflower-like patterns occurs with the increase of undercoolings.The interface normal angles and curvature distributions are proposed to quantitatively characterize crystal patterns.The results demonstrate that the distributions are corresponding to crystal morphological features,and they can be therefore used to describe the evolution of crystal patterns in a quantitative way.

Spiking patterns of a hippocampus model in electric fields

We develop a model of CA3 neurons embedded in a resistive array to mimic the effects of electric fields from a new perspective. Effects of DC and sinusoidal electric fields on firing patterns in CA3 neurons are investigated in this study. The firing patterns can be switched from no firing pattern to burst or from burst to fast periodic firing pattern with the increase of DC electric field intensity. It is also found that the firing activities are sensitive to the frequency and amplitude of the sinusoidal electric field. Different phase-locking states and chaotic firing regions are observed in the parameter space of frequency and amplitude. These findings are qualitatively in accordance with the results of relevant experimental and numerical studies. It is implied that the external or endogenous electric field can modulate the neural code in the brain. Furthermore, it is helpful to develop control strategies based on electric fields to control neural diseases such as epilepsy.

Pattern analysis of a linear dune field on the northern margin of Qarhan Salt Lake,northwestern China

In terms of formation mechanisms of linear dunes,there are open arguments for their widespread distribution and multi-morphological diversities.In order to clarify the formation mechanism of linear dunes of Qarhan Salt Lake,we used pattern analysis method to analyze the statistical characteristics and spatial variation of their pattern parameters.Except at the west-northwest margin,the pattern parameters showed regular spatial variation from the up-middle part towards the downwind end of the dune field.Based on the cumulative probability plots for inter-crest spacing and crest length,we divided the linear dunes into three groups,which corresponding to the three evolution stages of these dunes.The first group comprises erosional relics,with shorter crests,smaller inter-crest spacing and more random dune orientation.The second group comprises dunes whose sand supply is just sufficient to maintain stability and these dunes are approaching the net erosion stage.The crest length and inter-crest spacing of these dunes are much larger than those of the first group,and dune orientation is closer to the resultant drift direction （RDD） .The last group comprises linear dunes that are still undergoing vertical accretion and longitudinal elongation,which follows the RDD of the modern wind regime.The presence of regular spatial variation of pattern parameters and a similar geometry with the vegetated linear dunes suggest that deposition and erosion coexist in the development and evolution of linear dunes of Qarhan Salt Lake,i.e.deposition predominates at the downwind end of linear dunes in the vertical accretion and longitudinal elongation stage,whereas erosion mainly occurs at the upwind end of linear dunes in the degradation stage.Therefore,the formation mechanism of linear dunes in Qarhan Salt Lake can be reasonably explained by the combination of depositional and erosional theories.

Dynamic pattern characteristics of fault deformation and gravity field in the development process of Yongdeng M_S=5.8 earthquake

In this paper, the fault deformation abnormality, dynamic evolution features of gravity and vertical deformation field in the seismogenic process of the Yongdeng, Gansu Province earthquake on July 22, 1995 are studied primarily. There appeared α β γ tri stage anomaly at three sites near the epicenter, and there appeared anomalies of step and sudden jump at more than 10 sites in outer region since 1993. The high value area before shock, coseismic effect and process of recovery aftershock were monitored by portable gravity data. Data reflects the changing process of fault movement from the quasi linear to the nonlinear in the near source region during seismogenic development of the Yongdeng earthquake and evolution of gravity field from heterogeneity of seismogenic term to quasi homogeneity of postseismic term. There exists close relationship between strong earthquake and dynamic evolution of regional stress strain field. Considering all above, the experience and lessons in this medium short term prediction test are summarized.

Numerical Simulation of a Domain-Tessellation Pattern on a Spherical Surface Using a Phase Field Model

A numerical simulation scheme is proposed to analyze domain tessellation and pattern formation on a spherical surface using the phase-field method. A multi-phase-field model is adopted to represent domain growth, and the finite-difference method (FDM) is used for numerical integration. The lattice points for the FDM are distributed regularly on a spherical surface so that a mostly regular triangular domain division is realized. First, a conventional diffusion process is simulated using this lattice to confirm its validity. The multi-phase-field equation is then applied, and pattern formation processes under various initial conditions are simulated. Unlike pattern formation on a flat plane, where the regular hexagonal domains are always stable, certain different patterns are generated. Specifically, characteristic stable patterns are obtained when the number of domains, n, is 6, 8, or 12;for instance, a regular pentagonal domain division pattern is generated for n = 12, which corresponds to a regular dodecahedron.

Evolution of spiral wave and pattern formation in a vortical polarized electric field

In this paper, the evolution of the pattern transition induced by the vortical electric field （VEF） is investigated. Firstly, a scheme is suggested to generate the VEF by changing the spatial magnetic field. Secondly, the VEF is imposed on the whole medium, and the evolutions of the spiral wave and the spatiotemporal chaos are investigated by using the numerical simulation. The result confirms that the drift and the breakup of the spiral wave and the new net-like pattern are observed when different polarized fields are imposed on the whole medium respectively. Finally, the pattern transition induced by the polarized field is discussed theoretically.

Novel magnetic field computation model in pattern classification

Field computation, an emerging computation technique, has inspired passion of intelligence science research. A novel field computation model based on the magnetic field theory is constructed. The proposed magnetic field computation （MFC） model consists of a field simulator, a non-derivative optimization algo- rithm and an auxiliary data processing unit. The mathematical model is deduced and proved that the MFC model is equivalent to a quadratic discriminant function. Furthermore, the finite element prototype is derived, and the simulator is developed, combining with particle swarm optimizer for the field configuration. Two benchmark classification experiments are studied in the numerical experiment, and one notable advantage is demonstrated that less training samples are required and a better generalization can be achieved.

Preparation of patterned boron nanowire films with different widths of unit-cell and their field emission properties

Large-area patterned films of boron nanowires（BNWs） are fabricated at various densities by chemical vapor deposition（CVD）. Different widths of unit-cell of Mo masks are used as templates. The widths of unit-cell of Mo masks are100 μm, 150 μm, and 200 μm, respectively. The distance between unit cells is 50 μm. The BNWs have an average diameter of about 20 nm and lengths of 10 μm–20 μm. High-resolution transmission electron microscopy analysis shows that each nanowire has a β-tetragonal structure with good crystallization. Field emission measurements of the BNW films show that their turn-on electric fields decrease with width of unit-cell increasing.

Calculation and Analysis of Magnetic Field Pattern for TEXT-U Equipment

In this paper, the toroidal field B of a tokamak produced by separate coils has been calculated from the basic electrodynamic theory. As an example, the toroidal magnetic field B(R) in TEXT-U tokamak is plotted, and the curve is fitted well to the analysis formula B(R) = BoRo/R with a precision of several percents.

Effect of asymmetrical channel chirping on field intensity patterns of supermodes and modal discrimination in index guided laser arrays

The effect of channel-width chirping on near- and far-field intensity patterns of the six supermodes was investigated. The supermode discrimination was evaluated in various channel-chirped index guided laser arrays. The results show that the linearly channel-chirped laser array has very good supermode discrimination which is better than that of a uniform laser array, the V channel-chirped laser array has the smallest radiation angle of the fundamental supermode among the calculated arrays, and the asymmetrically V channel-chirped array has a very small radiation angle of the fundamental supermode, which is smaller than that of the uniform array and also allows for very good fundamental supermode discrimination against the higher-order supermodes, which is better than that of the V channel-chirped laser array.

Electron Field Emission from Patterned Porous Silicon Film

Patterned porous silicon （PS） films were synthesised by using bydrogen ion implantation technique and typical electrochemical anodic etching method.The surface morphology and characteristics of the PS films were characterized by scanning electron microscopy （SEM）,X-ray diffraction（XRD）,and atomic force microscopy （AFM）.The efficient electron field emission with low turn-on field of about 3.5V/μm was obtained at current density of 0.1μA/cm^2.The electron field emission current density from the patterned PS films reached 1mA/cm^2 under and applied field of about 12.5V/μm.The experimental results show that the patterned PS films are of certain practical significance and are valuable for flat panel displays.

SOME PROPERTIES OF FAR FIELD PATTERNS OF ACOUSTIC WAVES IN AN INHOMOGENEOUS MEDIUM

In this paper, by using functional analysis and integral equation method, we obtain some results about the properties of far field of acoustic waves in an inhomogeneous medium. And we also discuss some ill-posed inverse scattering problems by Tikhonov regularization method.

Study on a new grain-cash cropping pattern in paddy field

We studied a new grain-cash cropping pattern composed of "barley/watermelon + waize-rice", comparing with "barley / watermelon-rice" (CKI), "watermelon-rice", (CK2). The experiment was conducted in CNRRI’s field for 3 yr, employing completely randomized design with three replications, and each plot occupied 207 m~2. The soil in the experiment field contained: N, 2.48 g. kg, quick effective P 4 mg. kg, and quick effective K 53 mg·kg. The varieties tested were Zhemai 2 (barley), Zhemi 1 (watermelon), Suyu 1 (maize), and Shanyou 63 (hybrid rice).

Research on heat dissipation characteristics of magnetic fluid bearings under multiple field coupling effects

This paper analyzes the sources of heat losses in magnetic fluid bearings,proposes various cou-pling relationships of physical fields,divides the coupled heat transfer surfaces while ensuring the continuity of heat flux density,and analyzes the overall heat dissipation pathways of the bearings.By changing parameters such as input current,rotor speed,and inlet oil flow rate,the study applies a multi-physics field coupling method to investigate the influence of different parameters on the temper-ature field and heat dissipation patterns of the bearings,which is then validated through experi-ments.This research provides a theoretical basis for the optimal design of magnetic fluid bearing sys-tems.

Magnetic Field Configurations Corresponding to Electric Field Patterns That Evoke Long-Term Potentiation Shift Power Spectra of Light Emissions from Microtubules from Non-Neural Cells

Photon counts were measured every 15 ms for 75 s from microtubule-enriched preparations (and nuclei) from mouse melanoma cells during baseline and after 2 min exposures to 1 μT magnetic fields. The magnetic fields were generated from a circular array of solenoids and presented with accelerating or decelerating rotation velocities. The range of photon radiant flux density was in the order of 10-12 W·m-2. Microtubules preparations that had been exposed for only 2 min to a magnetic field configuration corresponding to the electric field pattern that induced long-term potentiation in neural tissue when applied as electric current displayed peaks of spectral power densities within 7 - 8 Hz, 9.5 Hz, 14 - 15 Hz, and 22 Hz bands. The major peak (9.4 Hz) bandwidth was approximately 0.1 Hz. While microtubule preparations exposed for 2 min to a 7 Hz sine-wave or in the absence of a field emitted an overall similar level of spectral power density, the peaks in power density were not present. Treatment with the LTP patterned fields, compared to the baseline or sine-wave fields primarily altered the frequency band in which the amplitude of the photon field was expressed. These results suggest that the photon emissions from microtubule preparations have the capacity to respond to specifically-patterned or geometric shapes of magnetic fields by altering spectral configurations rather than the absolute numbers of photons.

Determination of wax pattern die profile for investment casting of turbine blades

In order to conform to dimensional tolerances, an efficient numerical method, displacement iterative compensation method, based on finite element methodology （FEM） was presented for the wax pattern die profile design of turbine blades. Casting shrinkages at different positions of the blade which was considered nonlinear thermo-mechanical casting deformations were calculated. Based on the displacement iterative compensation method proposed, the optimized wax pattern die profile can be established. For a A356 alloy blade, substantial reduction in dimensional and shape tolerances was achieved with the developed die shape optimization system. Numerical simulation result obtained by the proposed method shows a good agreement with the result measured experimentally. After four times iterations, compared with the CAD model of turbine blade, the total form error decreases to 0.001 978 mm from the orevious 0.515 815 mm.

Response of CH_4 emission of paddy fields to land management practices at a microcosmic cultivation scale in China

The terrestrial ecosystem may be either a source or a sink of CH_4 in rice paddies, depending, to a great extent, on the change of ecosystem types and land use patterns. CH_4 emission fluxes from paddy fields under 4 cultivation patterns (conventional plain culture of rice(T1), no-tillage and ridge culture of rice(T2), no-tillage and ridge culture of rice and wheat (T3), and rice-wheat rotation(T4)) were measured with the closed chamber technique in 1996 and 1998 in Chongqing, China. The results showed that differences existed in CH_4 emission from paddy fields under these land management practices. In 1996 and 1998, CH_4 emission was 71 48% and 78 82%(T2), 65 93% and 57 18%(T3), and 61 53% and 34 22%(T4) of that in T1 during the rice growing season. During the non-rice growing season, CH_4 emission from rice fields was 76 23% in T2 and 38 69% in T1 The accumulated annual CH_4 emission in T2, T3 and T4 in 1996 decreased by 33 53%, 63 30% and 65 73%, respectively, as compared with that in T1 In 1998, the accumulated annual CH_4 emission in T1, T2, T3 and T4 was 116 96 g/m^2, 68 44 g/m^2, 19 70 g/m^2 and 11 80 g/m^2, respectively. Changes in soil physical and chemical properties, in thermal and moisture conditions in the soil and in rice plant growth induced by different land use patterns were the dominant causes for the difference in CH_4 emission observed. The relative contribution of various influencing factors to CH_4 emission from paddy fields differed significantly under different land use patterns. However, the general trend was that chlorophyll content in rice leaves, air temperature and temperature at the 5 cm soil layer play a major role in CH_4 emission from paddy fields and the effects of illumination, relative humidity and water layer depth in the paddy field and CH_4 concentration in the crop canopy were relatively non-significant. Such conservative land use patterns as no-tillage and ridge culture of rice with or without rotation with wheat are thought to be beneficial to reducing CH_4 emission from paddy fields and are, therefore, recommended as a significant solution to the problems of global(climatic) change.