YOLO-O2E:A Variant YOLO Model for Anomalous Rail Fastening Detection

Rail fasteners are a crucial component of the railway transportation safety system.These fasteners,distinguished by their high length-to-width ratio,frequently encounter elevated failure rates,necessitating manual inspection and maintenance.Manual inspection not only consumes time but also poses the risk of potential oversights.With the advancement of deep learning technology in rail fasteners,challenges such as the complex background of rail fasteners and the similarity in their states are addressed.We have proposed an efficient and high-precision rail fastener detection algorithm,named YOLO-O2E(you only look once-O2E).Firstly,we propose the EFOV(Enhanced Field of View)structure,aiming to adjust the effective receptive field size of convolutional kernels to enhance insensitivity to small spatial variations.Additionally,The OD_MP(ODConv and MP_2)and EMA(EfficientMulti-Scale Attention)modules mentioned in the algorithm can acquire a wider spectrum of contextual information,enhancing the model’s ability to recognize and locate objectives.Additionally,we collected and prepared the GKA dataset,sourced from real train tracks.Through testing on the GKA dataset and the publicly available NUE-DET dataset,our method outperforms general-purpose object detection algorithms.On the GKA dataset,our model achieved a mAP 0.5 value of 97.6%and a mAP 0.5:0.95 value of 83.9%,demonstrating excellent inference speed.YOLO-O2E is an algorithm for detecting anomalies in railway fasteners that is applicable in practical industrial settings,addressing the industry gap in rail fastener detection.

MMM testing and failure analysis of fastening bolts on reciprocating compressor cylinder cover

To avoid the serious accidents caused by the failure fastening bolts on reciprocating compressor cylinder cover,a new nondestructive testing(NDT) technology,metal magnetic memory(MMM) testing,was applied to safety evaluating and failure analyzing for the fastening bolts.Based on the dynamic stress calculation of the failure bolts,MMM testing was carried out at workshop.Given are the MMM stress distribution characteristics of the failure bolts and fracture faces.It has been found that the MMM signal variation amplitude of the crack transition zone in the fracture surface is minimal,that of the crack initiation zone is in the middle,and that of the tear fracture zone is maximal.The failure reasons were analyzed with MMM effect.The results of the metallographic examination showed that the validity and feasibility of MMM testing and failure analysis.This means MMM technology is a new,fast and validity method of failure analysis.

Investigation on dynamic characteristics of a rod fastening rotor-bearing coupling system with fixed-point rubbing

The aim of this paper is to gain insight into the nonlinear vibration feature of a dynamic model of a gas turbine.First,a rod fastening rotor-bearing coupling model with fixed-point rubbing is proposed,where the fractal theory and the finite element method are utilized.For contact analysis,a novel contact force model is introduced in this paper.Meanwhile,the Coulomb model is adopted to expound the friction characteristics.Second,the governing equations of motion of the rotor system are numerically solved,and the nonlinear dynamic characteristics are analyzed in terms of the bifurcation diagram,Poincarémap,and time history.Third,the potential effects provided by contact degree of joint interface,distribution position,and amount of contact layer are discussed in detail.Finally,the contrast analysis between the integral rotor and the rod fastening rotor is conducted under the condition of fixed-point rubbing.

Corrosion Test of the Steel Plate in a WJ-8 Fastener for High Speed Rail

It was found that the steel plate in the composite plate in the WJ-8 fastener used in high speed rail is rusty. The objective of this study is to test the zinc coating of the steel plate. A literature review was conducted to identify the zinc coating techniques, and the companies that can provide different coating service was identified. A salt fog chamber was built that was in compliance with the ANSI B117 code, and the steel plates that were coated by the identified companies were tested using the salt fog chamber. The results indicated that the coating technique that had the best performance in preventing corrosion was the Greenkote plates with passivation. The galvanized option had the roughest coating layer, and it was the most reactive in the salt water solution. This makes it non-ideal for the dynamic rail environment because the increased friction of the plate could damage the supports, especially during extreme temperatures that would cause the rail to expand or contract. Greenkote with Phosphate and ArmorGalv also provided increased corrosion prevention with a smooth, strong finish, but it had more rust on the surface area than the Greenkote with ELU passivation. The ArmorGalv sample had more rust on the surface area than the Greenkote samples. This may not be a weakness in the ArmorGalv process;rather, it likely was the result of this particular sample not having the added protection of a colored coating.

Regression Method for Rail Fastener Tightness Based on Center-Line Projection

In the railway system,fasteners have the functions of damping,maintaining the track distance,and adjusting the track level.Therefore,routine maintenance and inspection of fasteners are important to ensure the safe operation of track lines.Currently,assessment methods for fastener tightness include manual observation,acoustic wave detection,and image detection.There are limitations such as low accuracy and efficiency,easy interference and misjudgment,and a lack of accurate,stable,and fast detection methods.Aiming at the small deformation characteristics and large elastic change of fasteners from full loosening to full tightening,this study proposes high-precision surface-structured light technology for fastener detection and fastener deformation feature extraction based on the center-line projection distance and a fastener tightness regression method based on neural networks.First,the method uses a 3D camera to obtain a fastener point cloud and then segments the elastic rod area based on the iterative closest point algorithm registration.Principal component analysis is used to calculate the normal vector of the segmented elastic rod surface and extract the point on the centerline of the elastic rod.The point is projected onto the upper surface of the bolt to calculate the projection distance.Subsequently,the mapping relationship between the projection distance sequence and fastener tightness is established,and the influence of each parameter on the fastener tightness prediction is analyzed.Finally,by setting up a fastener detection scene in the track experimental base,collecting data,and completing the algorithm verification,the results showed that the deviation between the fastener tightness regression value obtained after the algorithm processing and the actual measured value RMSE was 0.2196 mm,which significantly improved the effect compared with other tightness detection methods,and realized an effective fastener tightness regression.

A Railway Fastener Inspection Method Based on Abnormal Sample Generation

Regular fastener detection is necessary to ensure the safety of railways.However,the number of abnormal fasteners is significantly lower than the number of normal fasteners in real railways.Existing supervised inspectionmethods have insufficient detection ability in cases of imbalanced samples.To solve this problem,we propose an approach based on deep convolutional neural networks(DCNNs),which consists of three stages:fastener localization,abnormal fastener sample generation based on saliency detection,and fastener state inspection.First,a lightweight YOLOv5s is designed to achieve fast and precise localization of fastener regions.Then,the foreground clip region of a fastener image is extracted by the designed fastener saliency detection network(F-SDNet),combined with data augmentation to generate a large number of abnormal fastener samples and balance the number of abnormal and normal samples.Finally,a fastener inspection model called Fastener ResNet-8 is constructed by being trained with the augmented fastener dataset.Results show the effectiveness of our proposed method in solving the problem of sample imbalance in fastener detection.Qualitative and quantitative comparisons show that the proposed F-SDNet outperforms other state-of-the-art methods in clip region extraction,reaching MAE and max F-measure of 0.0215 and 0.9635,respectively.In addition,the FPS of the fastener state inspection model reached 86.2,and the average accuracy reached 98.7%on 614 augmented fastener test sets and 99.9%on 7505 real fastener datasets.

Research on Track Fastener Service Status Detection Based on Improved Yolov4 Model

As an important part of railway lines, the healthy service status of track fasteners was very important to ensure the safety of trains. The application of deep learning algorithms was becoming an important method to realize its state detection. However, there was often a deficiency that the detection accuracy and calculation speed of model were difficult to balance, when the traditional deep learning model is used to detect the service state of track fasteners. Targeting this issue, an improved Yolov4 model for detecting the service status of track fasteners was proposed. Firstly, the Mixup data augmentation technology was introduced into Yolov4 model to enhance the generalization ability of model. Secondly, the MobileNet-V2 lightweight network was employed in lieu of the CSPDarknet53 network as the backbone, thereby reducing the number of algorithm parameters and improving the model’s computational efficiency. Finally, the SE attention mechanism was incorporated to boost the importance of rail fastener identification by emphasizing relevant image features, ensuring that the network’s focus was primarily on the fasteners being inspected. The algorithm achieved both high precision and high speed operation of the rail fastener service state detection, while realizing the lightweight of model. The experimental results revealed that, the MAP value of the rail fastener service state detection algorithm based on the improved Yolov4 model reaches 83.2%, which is 2.83% higher than that of the traditional Yolov4 model, and the calculation speed was improved by 67.39%. Compared with the traditional Yolov4 model, the proposed method achieved the collaborative optimization of detection accuracy and calculation speed.

Rail fastener detection of heavy railway based on deep learning

Image detection based on machine learning and deep learning currently has a good application prospect for railway fault diagnosis,with good performance in feature extraction and the accuracy of image localization and good classification results.To improve the speed of locating small target objects of fasteners,the YOLOv5 framework model with faster algorithm speed is selected.To improve the classification accuracy of fasteners,YOLOv5-based heavy-duty railway rail fastener detection is proposed.The anchor size is modified on the original basis to improve the attention to small targets of fasteners.The CBAM(Convolutional Block Attention Module)module and TPH(Transformer Prediction Head)module are introduced to improve the speed and accuracy issues.The rail fasteners are divided into 6 categories.Experiment comparisons show that before the improvement,the MAP@0.5 value of all categories are close to the peak of 0.989 after the epoch of 150,and the F1 score approaches 1 with confidence in the interval(0.2,0.95).The improved mAP@0.5 value approached the highest value of 0.991 after the epoch of 75,and the F1 score approached 1 with confidence in the interval(0.01,0.95).The experiment results indicate that the improved YOLOv5 model proposed in this paper is more suitable for the task of detecting rail fasteners.

后锚固技术简介及应用

后锚固技术的作用原理,及其在房屋加固改造工程中的应用。

典型加筋壁板纯剪切工况有限元模拟

针对典型加筋壁板纯剪切试验夹具,利用Abaqus软件对该纯剪切工况进行模拟,验证夹具设计的合理性。采用一维、二维和三维单元相结合的方式,显著提高计算效率。从壁板承受面内剪力角度分析加筋壁板的整体受力情况。计算结果表明,整体模型von Mises应力呈现中心对称性,壁板芯边界上距加载端较远区域应力分布均匀,满足纯剪切条件;壁板向加筋条的载荷传递效率较低;夹头螺栓附近应力呈现较好的对称分布。

A study on joining magnesium alloy high pressure die casting components with thread forming fasteners

With tremendous weight saving potential,magnesium alloy high pressure die casting components have been widely used for automotive applications.Magnesium fastening technology is thus becoming increasingly important to design engineers.Joining as-cast holes of magnesium high pressure die casting components with thread forming fasteners provides significant advantages for the assembly process,overall cost benefit and joint integrity.This type of joint is thus preferred for structural applications.Designing the thread forming fasteners with as-cast holes follows the general rules for designing for the machined holes,including carefully designing the variables such as the assembly torque range,the length of thread engagement,the hole diameter and required failure mode.In addition,special attention needs to be paid to the draft angles of the magnesium cast components that are required for the die casting process.In this paper,the effects of above key factors,individually and combined,on the joint performance of thread forming fasteners with as-cast blind holes of AM60B magnesium components are studied.A joint design philosophy was proposed to optimize both joint performance(the prevailing torque,the failure torque and the failure mode)and manufacturing easiness(the hole diameter and corresponding draft angle).The detailed design considerations for as-cast holes of magnesium HPDC are discussed and explained through a hypothetical example.

Numerical Analysis of Static Performance Comparison of Friction Stir Welded versus Riveted 2024-T3 Aluminum Alloy Stiffened Panels

Most researches on the static performance of stiffened panel joined by friction stir welding（FSW） mainly focus on the compression stability rather than shear stability. To evaluate the potential of FSW as a replacement for traditional rivet fastening for stiffened panel assembly in aviation application, finite element method（FEM） is applied to compare compression and shear stability performances of FSW stiffened panels with stability performances of riveted stiffened panels. FEMs of 2024-T3 aluminum alloy FSW and riveted stiffened panels are developed and nonlinear static analysis method is applied to obtain buckling pattern, buckling load and load carrying capability of each panel model. The accuracy of each FEM of FSW stiffened panel is evaluated by stability experiment of FSW stiffened panel specimens with identical geometry and boundary condition and the accuracy of each FEM of riveted stiffened panel is evaluated by semi-empirical calculation formulas. It is found that FEMs without considering weld-induced initial imperfections notably overestimate the static strengths of FSW stiffened panels. FEM results show that, buckling patterns of both FSW and riveted compression stiffened panels represent local buckling of plate between stiffeners. The initial buckling waves of FSW stiffened panel emerge uniformly in each plate between stiffeners while those of riveted panel mainly emerge in the mid-plate. Buckling patterns of both FSW and riveted shear stiffened panels represent local buckling of plate close to the loading corner. FEM results indicate that, shear buckling of FSW stiffened panel is less sensitive to the initial imperfections than compression buckling. Load carrying capability of FSW stiffened panel is less sensitive to the initial imperfections than initial buckling. It can be concluded that buckling loads of FSW panels are a bit lower than those of riveted panels whereas carrying capabilities of FSW panels are almost equivalent to those of riveted panels with identical geometries. Finite element method for simulating static performances of FSW and riveted stiffened panels is proposed and evaluated and some beneficial conclusions are obtained, which offer useful references for analysis and application of FSW to replace rivet fastening in aviation stiffened panel assembly.

Testing and Approval Procedures for New Slab Track Systems in Europe

This paper describes the required testing and approval procedures of new track systems operated in Europe. To begin with, test methods and performance specifications according to European Standard （EN） are outlined. These include the repeated loading test, the determination of the static and dynamic stiffness of rail pads, clamping force and longitudinal rail resistance. The fact that labor tests are unable to simulate all the conditions in situ shows that these labor tests are not sufficient for the evaluation of the long term behaviour of a new track system： a test track of sufficient length must be constructed and exposed to traffic loads. In Europe to be accredited as a new system, a new slab track system must have a trial time of more than two years, during which the features of the whole system can be recognized. In the second part of this paper, the experience of the Institute of Road, Railway and Airfield Construction of TUM concerning the measuring methods of slab track systems carrying traffic are outlined. Also the approval procedure of the new slab tracks in Germany is discussed.

Synthesis, Characterisation and Photoresponsive Studies of Lignin Functionalised with 2-(5-(4-dimethylamino-benzylidin)-4-oxo-2-thioxo- thiazolidin-3-yl)-acetic Acid

A chromophoric system 2-(5-(4-dimethylamino-benzylidin)-4-oxo-2-thioxo-thiazoli din-3-yl)acetic acid with push-pull electron modulation was synthesised and incorporated onto lignin core (technical lignin, lignin sulphonic acid M.W. 52,400) and the photo responsive behaviour was investigated. The product was characterised by UV-visible, fluores-cence, FT-IR, and NMR spectroscopic methods. The results of the studies show that the incorporation of the chromo-phoric system on to the lignin core enhanced the light absorption and light stabilization properties of the chromophoric system. The remarkable stability on irradiation provides a novel photo responsive system with excellent light fastening properties which would find application in coating materials, dyes, paints etc.

Synthesis, Characterization and Photoinduced Cis-Trans Isomerisation Studies on Lignin Modified with 4-[(E)-2-(3-hydroxynaphthalen-2-yl)diazen-1-yl] Benzoic Acid

In the present study, a photoresponsive chromophoric system such as 4-[(E)-2-(3-hydro xynaphthalen-2-yl)diazen-1-yl] benzoic acid was incorporated on to lignin core by functional transformation reactions and the photoresponsive beha-vior of the green, environment friendly product was investigated. The end hydroxyl group of lignin was modified with the chromophoric systems by DCC coupling. The chromophoric systems as well as the chromophore-bound biopolymer core systems were purified by column chromatography. The products were characterized by UV-visible, fluorescence, FT-IR and NMR spectroscopic methods. The results of the studies show that incorporation of the chromophoric system on to the lignin core enhanced the light absorption, emission and light stabilization properties of the chromophoric system. The light fastening properties of chromophoric system and the modified product were compared. It shows that stability of the chromophoric system greatly enhanced on attaching to the polymeric system. The trans-cis photoisomerisation and the reverse cis-trans thermal conversions were also assisted by the lignin core. The remarkable stability on irradiation shows that this is a novel photoresponsive system with excellent light fastening properties which would find application in coating materials, dyes, paints, inks, therapeutic agents and many more.

Online Rail Fastener Detection Based on YOLO Network

Traveling by high-speed rail and railway transportation have become an important part of people’s life and social production.Track is the basic equipment of railway transportation,and its performance directly affects the service lifetime of railway lines and vehicles.The anomaly detection of rail fasteners is in a priority,while the traditional manual method is extremely inefficient and dangerous to workers.Therefore,this paper introduces efficient computer vision into the railway detection system not only to locate the normal fasteners,but also to recognize the fasteners states.To be more specific,this paper mainly studies the rail fastener detection based on improved You can Only Look Once version 5(YOLOv5)network,and completes the real-time classification of fastener states.The improved YOLOv5 network proposed contains five sections,which are Input,Backbone,Neck,Head Detector and a read-only Few-shot Example Learning module.The main purpose of this project is to improve the detection precision and shorten the detection time.Ultimately,the rail fastener detection system proposed in this paper is confirmed to be superior to other advanced algorithms.This model achieves on-line fastener detection by completing the“sampling-detection-recognition-warning”cycle of a single sample before the next image is sampled.Specifically,the mean average precision of model reaches 94.6%.And the model proposed reaches the speed of 12 ms per image in the deployment environment of NVIDIA GTX1080Ti GPU.

Derailment risk and dynamics of railway vehicles in curved tracks： Analysis of the effect of failed fasteners

The effect of the fastener＇s failure in a railway track on the dynamic forces produced in the wheel-rail contact is studied using the simulation software VAMPIRE to assess the derailment risk of two different vehicles in two curves with distinct characteristics. First, a 3D-FEM model of a real track is constructed, paying special attention to fasteners, and calibrated with displacement data obtained experimentally during a train passage. This numerical model is subsequently used to determine the track vertical and lateral stiffness. This study evidences that although the track can practically lose its lateral stiffness as a consequence of the failure of 7 consecutive fasteners, the vehicle stability would not be necessarily compromised in the flawed zone. Moreover, the results reveal that the uncompensated acceleration and the distance along which the fasteners are failed play an important role in the dynamic behavior of the vehicle-track system, influencing strongly the risk of derailment.

The Use of Cavitation Peening to Increase the Fatigue Strength of Duralumin Plates Containing Fastener Holes

An effective method for improving the fatigue life of Duralumin plates with fastener holes, such as those used in the construction of aircraft, is to introduce a compressive residual stress around the fastener holes. Cavitation peening is a novel peening method that uses the cavitation impact produced when a high-speed water jet is injected into a water-filled chamber. In this paper, Duralumin plate specimens with holes were treated by cavitation peening under various conditions, and the fatigue strength of the specimens was determined using a plate bending fatigue test. It was revealed that a compressive residual stress was introduced not only on surfaces perpendicular to the axis of the cavitating jet but also on the walls of holes which were parallel to this. It was found that a 51% improvement in fatigue strength could be achieved by cavitation peening. Note that this is first report demonstrating an improvement in the fatigue life of Duralumin plates with fastener holes by cavitation peening.

Rail fastener defect inspection method for multi railways based on machine vision

Purpose–This research aims to improve the performance of rail fastener defect inspection method for multi railways,to effectively ensure the safety of railway operation.Design/methodology/approach–Firstly,a fastener region location method based on online learning strategy was proposed,which can locate fastener regions according to the prior knowledge of track image and template matching method.Online learning strategy is used to update the template library dynamically,so that the method not only can locate fastener regions in the track images of multi railways,but also can automatically collect and annotate fastener samples.Secondly,a fastener defect recognition method based on deep convolutional neural network was proposed.The structure of recognition network was designed according to the smaller size and the relatively single content of the fastener region.The data augmentation method based on the sample random sorting strategy is adopted to reduce the impact of the imbalance of sample size on recognition performance.Findings–Test verification of the proposed method is conducted based on the rail fastener datasets of multi railways.Specifically,fastener location module has achieved an average detection rate of 99.36%,and fastener defect recognition module has achieved an average precision of 96.82%.Originality/value–The proposed method can accurately locate fastener regions and identify fastener defect in the track images of different railways,which has high reliability and strong adaptability to multi railways.

Experimental and Numerical Investigation on the Mechanical Behaviors of the Velcro^(■) and Dual-Lock Fasteners

In order to characterize the mechanical behaviors of the Velcro~? and Dual-lock fasteners, a series of tests including the butt-joint(BJ) monotonic tensile and shear, mixed tensile-shear with various loading angles, the loading rates effects, the double cantilever beam(DCB) fracture and 180° peel experiments were performed. The tensile and shear tests results showed that the mechanical behaviors of Velcro~? fastener separation are analogous to ductile materials, and those of Dual-lock fasteners are more like brittle ones. The mixed tensile-shear with various loading angles tests results demonstrated that magnitudes of the peak stresses in 30°, 45°, and 60° have no significant differences, which are lower than those in the monotonic tensile or shear tests for the two fasteners. The effects of the loading rate tests show that the peak stresses of the Velcro~? fastener manifested good performance at the loading rate of 10 to 20 mm/min in the tensile and shear conditions, and the Dual-lock did it well around the loading rates of 10 to 20 mm/min in the tensile condition. The cohesive zone model(CZM) is employed to numerical predict the DCB fracture and the 180° peel tests. The CZM predictions results are proven to commendably capture the two tests separation processes, of the tow fasteners, and the numerical results agreed well with the peeling tests data of the Dual lock fasteners. The results and discussions in this study are expected to bring more understanding to engineers and designers about the performance of Velcro~? and Dual lock fasteners.