Geophysical Features of the Ore-Controlling Fault in the Chang'an Gold Deposit, Southern Yunnan Province

The Ailao Mountain is one of the most important metallogenic belts ofpolymetallic deposits in the Sanjiang region, southwestern China. Located in the southern segment of this metallogenic belt, the newly-discovered Chang＇an gold deposit is large in scale （Fig. 1A）, and has attracted much attention among geologists. The ore-hosted rocks in the district include the Late Ordovician Xiangyang Fm. sandstone and clastic rocks and the Early Silurian Kanglang Fm. dolomite. Affected by the multistage tectonic activities, stocks and dykes of lamprophyre, dolerite, syenite porphyry and orthoclasite are widely exposed, and the orebodies are in symbiosis with or crosscut the dyke rocks.

Mineralization and Ore-controlling Implications of Low-angle Faults

Abstract Low-angle faults include those occurring in thrust-nappe structures in a compressive setting and the detachment of metamorphic core complexes in an extensional setting. All low-angle faults have their own particularities. The low-angle fault plays an important role in controlling over some endogenetic metallic ore deposits. Based on studies of the Xiaoban gold deposit, Xinzhou gold deposit, and Longfengchang polymetallic ore deposit, and comparisons with other mines, the authors conclude the ore-controlling implications of low-angle faults as follows. (1) Because of high temperature and high pressure, as well as strong ductile deformation, the internal energy of the elements rises in the large-scale deep ductile low-angle faults, which causes the elements to activate and differentiate from the source rocks, forming ore-bearing hydrothermal solution, and bring mineralization to happen. (2) When rising from depths and flowing along the low-angle faults, the ore-bearing hydrothermal solution will alter and replace the tectonites in the fault zone. The rocks of the hanging side and the heading side differ in lithology, texture and structure, which results in changes or dissimilarities of the physical-chemical conditions. This destroys the balance of the hydrothermal solution system and causes the dissolved ore-forming elements to precipitate; as a result, a deposit is formed. Therefore, the meso-shallow ductile-brittle low-angle faults play the role of a geochemical interface in the process of mineralization. (3) Low-angle faults are often one of the important host structures.

Ore-controlling Characteristics of Synchronous Faults of Dongshengmiao Polymetallic Sulfide Deposits in Inner Mongolia

1 Introduction The Dongshengmiao deposit is a super-large Zn-Pb polymetallic sulfide deposit which occurring in the Langshan-Zhaertaaishan metallogenic belt,and located in the western margin of the North China Platform.The ore-bodies of Dongshengmiao deposits are mainly hosted in the second Formation of Langshan Group.There are some studies on the geological characteristics(Peng et al.,2004),geological and

Lower activity time constraint on the ore-controlling Erdaogou fault in the Qingchengzi orefield of the Liaodong Peninsula,NE China

The Erdaogou fault,also known as the 101 fault,comprises the most important NE strike component in the ore-controlling system in the Qingchengzi orefield,Liaodong Peninsula.Due to the poor outcrop conditions in the field,the Erdaogou fault lacks activity time constraint.We demonstrate the constraint activity time of the fault since we observe a lamprophyre that was cut through by the Erdaogou fault in the Taoyuan area,central to the Qingchengzi orefield.Zircon grains from the lamprophyre dyke exhibit typical oscillatory zoning and yield weighted mean U–Pb age of 223.8±1.1 Ma(MSWD=1.5).The lower activity time limit of the Erdaogou fault is thus first constrained as 224 Ma or so and is correlated with the crystallization age of the Xinling and Shuangdinggou plutons within the orefield.Taking previous mineralization studies into consideration,a Triassic tectonic-magmatism-mineralization model is approved in the Qingchengzi orefield.

Geological Characteristics and Ore-controlling Factors of the Beiya Gold–Polymetallic Ore Deposit, Northwestern Yunnan Province

Based on comprehensive petrological, geochronological, and geochemical studies, this study analyzed the relationships between the Beiya gold-polymetallic skarn deposit and quartz syenite porphyries, and discussed the source（s） and evolution of magmas. Our results suggest that syenite porphyries（i.e. the Wandongshan, the Dashadi, and the Hongnitang porphyries）, which formed between the Eocene and the early Oligocene epochs, are the sources for the gold-polymetallic ores at the Beiya deposit. Carbonate rocks（T2 b） of the Triassic Beiya Formation in the ore district provide favorable host space for deposit formation. Fold and fault structures collectively play an important role in ore formation. The contact zone between the porphyries and carbonates, the structurally fractured zone of carbonate and clastic rocks, and the zone with well-developed fractures are the ideal locations for ore bodies. Four types of mineralization have been recognized： 1） porphyry-style stockwork gold–iron（copper） ore, 2） skarn-style gold-iron（copper and lead） ore in the near contact zone, 3） strata-bound, lense-type lead–silver–gold ore in the outer contact zone, and 4） distal vein-type gold–lead–silver ore. Supergene processes led to the formation of oxide ore, such as the weathered and accumulated gold–iron ore, the strata-bound fracture oxide ore, and the structure-controlled vein-type ore. Most of these ore deposits are distributed along the axis of the depressed basin, with the hypogene ore controlling the shape and characteristics of the oxide ore. This study provides critical geology understanding for mineral prospecting scenarios.

Quantitative analysis of geological ore-controlling factors and stereoscopic quantitative prediction of concealed ore bodies

To address the issues for assessing and prospecting the replaceable resource of crisis mines, a geological ore-controlling field model and a mineralization distribution field model were proposed from the viewpoint of field analysis. By dint of solving the field models through transferring the continuous models into the discrete ones, the relationship between the geological ore-controlling effect field and the mineralization distribution field was analyzed, and the quantitative and located parameters were extracted for describing the geological factors controlling mineralization enrichment. The method was applied to the 3-dimensional localization and quantitative prediction for concealed ore bodies in the depths and margins of the Daehang mine in Guangxi, China, and the 3-dimensional distribution models of mineralization indexes and ore-controlling factors such as magmatic rocks, strata, faults, lithology and folds were built. With the methods of statistical analysis and the non-linear programming, the quantitative index set of the geological ore-controlling factors was obtained. In addition, the stereoscopic located and quantitative prediction models were set up by exploring the relationship between the mineralization indexes and the geological ore-controlling factors. So far, some concealed ore bodies with the resource volume of a medium-sized mineral deposit are found in the deep parts of the Dachang Mine by means of the deep prospecting drills following the prediction results, from which the effectiveness of the predication models and results is proved.

The Characteristics of Ore-Controlling Structure in Baoshan Cu-Pb-Zn Polymetallic Deposit,Hunan Province

The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part of Nanling polymetallic deposit belt.The outcropping stratas consist of upper Devonian Shetianqiao,Xikuangshan Formation,Lower Carboniferous Menggong’ao,Shidengzi,Ceshui,and Zimenqiao Formation.Igneous rocks in the Baoshan ore area mainly comprise granodiorite porphyry.Furthermore,the radio isotopic age ranges from 123 Ma to 183 Ma,belonging to the early to middle Yanshanian.

Analysis of Ore-controlling Structure in the Qifengcha-Detiangou Gold Deposit,Huairou County,Beijing

The Qifengcha-Detiangou gold deposit is a medium-sized deposit recently found in Huairou County, Beijing. It belongs to the altered mylonite type with superimposed quartz vein type and is related to the early Yanshanian magmatic activity. Characterized by multiperiodic activity, the NE-trending Qifengcha fault is a regional ore-controlling structure in the area, and gold mineralization develops only in its southeastern part. Meanwhile, gold mineralization is controlled by the Yunmengshan metamorphic core complex. The nearly N-S- and E-W-trending low-angle detachment faults, reformed by the Qifengcha fault in the northwestern part of the core complex, are the main ore-bearing faults. All discovered gold deposits are located within an area 1.5–4.0 km away from the boundary of the upwelling centre. The N-S- (NNE-) and E-W-trending ore-bearing faults are ductile-brittle structural zones developing in shallow positions and subjected mainly to compressive deformation. The structural ore-controlling effects are as follows. (1) The attitude, shape, and distribution of gold orebodies are controlled by faults. (2) There is a negative correlation between the gold abundance and the magnetic anisotropy (P) of the altered mylonite samples from the deposit, which shows that the gold mineralization is later than the structural deformation. (3) Quartz vein type mineralization is superimposed on altered mylonite type mineralization. (4) In mineralized mylonite, the stronger the ductile shear deformation, the easier the late-stage gold mineralization to occur and the higher the gold abundance. The richest gold mineralization occurs only around the centre of the fault subjected to the strongest deformation.

Ore-controlling effect of structure and distribution of deep rock mass on Pb-Zn deposit in Qingchengzi ore concentration area,Liaoning

Qingchengzi ore concentration area in Liao-Ji rift is an important lead-zinc ore area of China,and the deep prospecting in this area has great prospects.Based on the spatial occurrence of ore bodies the Pb-Zn deposit can be divided into three types:layered,vein-shaped and pinnate.The deep geological conditions in this area are deduced by analyzing the tectonic evolution process and rock mass gravity inversion.The tectonic evolution of Liao-Ji rift can be divided into three stages:Paleoproterozoic extension period,Mesoproterozoic compression period and Mesozoic reactivation period.The magmatic activities in the Indosinian epoch led to the distribution pattern of the present deposits.According to the gravity inversion,Shuangdinggou-and Xinling rock masses on the north and south sides of the mining area are connected in the deep.The connected rock body might be distributed in the entire mining area.Xinling rock mass may be a branch extending from Shuangdinggou rock mass along the northeast trending fault,the connected rocks provide magmatic hydrothermal fluid for the final,folds and faults result in different types of ore body shapes.

Analysis of Ore-Controlling Structures of the Xincheng-Hexi Gold Deposit,Shandong Province,China

Based on quantitative and semi-quantitative mathematical and mechanical analysis of the shape, motion, structural factors, stress field and deformation field of the ore-hosting faults in the Xincheng-Hexi gold deposit, the ore-controlling features of faults and mineralization mechanism are discussed. It is concluded that the mineralization is controlled by the main faults, subsidiary fractures, joint density, mechanical features and deformation of the faults. The ore bodies are mainly located in the lower part of the convex crest and upper part of the concave trough of the main undulating fault surface. Mineralization is positively correlated to the development of subsidiary fractures and joints, which correspond to zones of low internal stress and high body strain and shear strain. They are favourable positions for mineralization and alteration.

Gouge stability controlled by temperature elevation and obsidian addition in basaltic faults and implications for moonquakes

Basalt is a major component of the earth and moon crust.Mineral composition and temperature influence frictional instability and thus the potential for seismicity on basaltic faults.We performed velocitystepping shear experiments on basalt gouges at a confining pressure of 100 MPa,temperatures in the range of 100-400℃ and with varied obsidian mass fractions of 0-100%under wet/dry conditions to investigate the frictional strength and stability of basaltic faults.We observe a transition from velocity-neutral to velocity-weakening behaviors with increasing obsidian content.The frictional stability response of the mixed obsidian/basalt gouges is characterized by a transition from velocitystrengthening to velocity-weakening at 200℃ and another transition to velocity-strengthening at temperatures>300℃.Conversely,frictional strengths of the obsidian-bearing gouges are insensitive to temperature and wet/dry conditions.These results suggest that obsidian content dominates the potential seismic response of basaltic faults with the effect of temperature controlling the range of seismogenic depths.Thus,shallow moonquakes tend to occur in the lower lunar crust due to the corresponding anticipated higher glass content and a projected temperature range conducive to velocity-weakening behavior.These observations contribute to a better understanding of the nucleation mechanism of shallow seismicity in basaltic faults.

Characterization and spatial analysis of coseismic landslides triggered by the Luding Ms 6.8 earthquake in the Xianshuihe fault zone, Southwest China

On September 5, 2022, a magnitude Ms 6.8 earthquake occurred along the Moxi fault in the southern part of the Xianshuihe fault zone located in the southeastern margin of the Tibetan Plateau,resulting in severe damage and substantial economic loss. In this study, we established a coseismic landslide database triggered by Luding Ms 6.8 earthquake, which includes 4794 landslides with a total area of 46.79 km^(2). The coseismic landslides primarily consisted of medium and small-sized landslides, characterized by shallow surface sliding. Some exhibited characteristics of high-position initiation resulted in the obstruction or partial obstruction of rivers, leading to the formation of dammed lakes. Our research found that the coseismic landslides were predominantly observed on slopes ranging from 30° to 50°, occurring at between 1000 m and 2500 m, with slope aspects varying from 90° to 180°. Landslides were also highly developed in granitic bodies that had experienced structural fracturing and strong-tomoderate weathering. Coseismic landslides concentrated within a 6 km range on both sides of the Xianshuihe and Daduhe fault zones. The area and number of coseismic landslides exhibited a negative correlation with the distance to fault lines, road networks, and river systems, as they were influenced by fault activity, road excavation, and river erosion. The coseismic landslides were mainly distributed in the southeastern region of the epicenter, exhibiting relatively concentrated patterns within the IX-degree zones such as Moxi Town, Wandong River basin, Detuo Town to Wanggangping Township. Our research findings provide important data on the coseismic landslides triggered by the Luding Ms 6.8 earthquake and reveal the spatial distribution patterns of these landslides. These findings can serve as important references for risk mitigation, reconstruction planning, and regional earthquake disaster research in the earthquake-affected area.

Dynamic Vision Enabled Contactless Cross-Domain Machine Fault Diagnosis With Neuromorphic Computing

Dear Editor,This letter presents a novel dynamic vision enabled contactless cross-domain fault diagnosis method with neuromorphic computing.The event-based camera is adopted to capture the machine vibration states in the perspective of vision.

Autonomous Recommendation of Fault Detection Algorithms for Spacecraft

Dear Editor, This letter deals with the problem of algorithm recommendation for online fault detection of spacecraft. By transforming the time series data into distributions and introducing a distribution-aware measure, a principal method is designed for quantifying the detectabilities of fault detection algorithms over special datasets.

Ore-controlling Regularitiesof Structureinthe Lehong Lead-zinc Deposit, Northeastern Yunnan

1 Introduction The Lehonglead-zincdeposit is a large-sized Pb-Zn depositnewly found in recent years in the Sichuan-Yunnan-Guizhou Lead-zinc Poly-metallic Mineralization Area,which occurrenceis strictly

The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

Instability mechanism of mining roadway passing through fault at different angles in kilometre-deep mine and control measures of roof cutting and NPR cables

The angle α between the fault strike and the axial direction of the roadway produces different damage characteristics. In this paper, the research methodology includes theoretical analyses, numerical simulations and field experiments in the context of the Daqiang coal mine located in Shenyang, China. The stability control countermeasure of "pre-splitting cutting roof + NPR anchor cable"(PSCR-NPR) is simultaneously proposed. According to the different deformation characteristics of the roadway, the faults are innovatively classified into three types, with α of type I being 0°-30°, α of type II being 30°-60°, and α of type III being 60°-90°. The full-cycle stress evolution paths during mining roadway traverses across different types of faults are investigated by numerical simulation. Different pinch angles α lead to high stress concentration areas at different locations in the surrounding rock. The non-uniform stress field formed in the shallow surrounding rock is an important reason for the instability of the roadway. The pre-cracked cut top shifted the high stress region to the deep rock mass and formed a low stress region in the shallow rock mass. The high prestressing NPR anchor cable transforms the non-uniform stress field of the shallow surrounding rock into a uniform stress field. PSCR-NPR is applied in the fault-through roadway of Daqiang mine. The low stress area of the surrounding rock was enlarged by 3-7 times, and the cumulative convergence was reduced by 45%-50%. It provides a reference for the stability control of the deep fault-through mining roadway.

A novel multi-resolution network for the open-circuit faults diagnosis of automatic ramming drive system

The open-circuit fault is one of the most common faults of the automatic ramming drive system(ARDS),and it can be categorized into the open-phase faults of Permanent Magnet Synchronous Motor(PMSM)and the open-circuit faults of Voltage Source Inverter(VSI). The stator current serves as a common indicator for detecting open-circuit faults. Due to the identical changes of the stator current between the open-phase faults in the PMSM and failures of double switches within the same leg of the VSI, this paper utilizes the zero-sequence voltage component as an additional diagnostic criterion to differentiate them.Considering the variable conditions and substantial noise of the ARDS, a novel Multi-resolution Network(Mr Net) is proposed, which can extract multi-resolution perceptual information and enhance robustness to the noise. Meanwhile, a feature weighted layer is introduced to allocate higher weights to characteristics situated near the feature frequency. Both simulation and experiment results validate that the proposed fault diagnosis method can diagnose 25 types of open-circuit faults and achieve more than98.28% diagnostic accuracy. In addition, the experiment results also demonstrate that Mr Net has the capability of diagnosing the fault types accurately under the interference of noise signals(Laplace noise and Gaussian noise).

Step-over of strike-slip faults and overpressure fluid favor occurrence of foreshocks:Insights from the 1975 Haicheng fore-main-aftershock sequence,China

This study analyzed and summarized in detail the spatial and temporal distributions of earthquakes,tidal responses,focal mechanisms,and stress field characteristics for the M 7.3 Haicheng earthquake sequence in February 1975.The foreshocks are related to the main fault and the conjugate faults surrounding the extension step-over in the middle.The initiation timing of the foreshock clusters and the original time of the mainshock were clearly modulated by the Earth's tidal force and coincided with the peak of dilational volumetric tidal strain.As a plausible and testable hypothesis,we proposed a fluid-driven foreshock model,by which all observed seismicity features can be more reasonably interpreted with respect to the results of existing models.Together with some other known examples,the widely existing step-over along strike-slip faults and associated conjugate faults,especially for extensional ones in the presence of deep fluids,favor the occurrence of short-term foreshocks.Although clustered seismicity with characteristics similar to those of the studied case is not a sufficient and necessary condition for large earthquakes to occur under similar tectonic conditions,it undoubtedly has a warning significance for the criticality of the main fault.Subsequent testing would require quantification of true/false positives/negatives.

Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills

The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.