The increasing importance of energy efficiency has led to several studies related to the construction of a reliable low voltage DC(LVDC) distribution system.Specifically, studies on a protection scheme that considers ...The increasing importance of energy efficiency has led to several studies related to the construction of a reliable low voltage DC(LVDC) distribution system.Specifically, studies on a protection scheme that considers the fault characteristics of an LVDC distribution system are essential to improve system reliability. When compared to a conventional distribution system, the most distinct feature of an LVDC distribution system is the existence of a capacitive discharge current from converters under a fault condition that results in the prompt operation of protection devices. Therefore, this study involves proposing a precise and rapid technique to identify the fault section in an LVDC distribution system. The technique involves two stages, namely: an analysis stage to analyze the capacitive discharge current and a decision stage to identify the fault section based on the fault type. A detailed discussion of each step is presented and its feasibility is verified based on the results of simulations with an ElectroMagnetic Transients Program and MATLAB~?.展开更多
With waveform data of 613 earthquakes with ML ≥ 2. 5 in the middle section of the Xiaojiang fault and its adjacent area which occurred during January,1998 to September 2007,focal mechanisms were calculated by the dir...With waveform data of 613 earthquakes with ML ≥ 2. 5 in the middle section of the Xiaojiang fault and its adjacent area which occurred during January,1998 to September 2007,focal mechanisms were calculated by the direct wave amplitude ratio of S /P in the vertical component and their characteristics were analyzed. According to regional tectonic features of the middle section of the Xiaojiang fault and its adjacent area,the study region was partitioned into two zones with the Xiaojiang fault as the boundary,e. g. zone A and zone B (including the Xiaojiang fault). In order to research the faults stress in detail,the Xiaojiang fault zone was picked out for independent analysis. The study region was also partitioned into 1°× 1° cells with a 0. 5° step. The stress fields of zone A,B and the fault zone were inverted with the FMSI method (Gephart,1990). The results show that first, the faults are mainly of strike-slip in the middle section and its adjacent area,amounting to 81. 28%,69. 23% and 72. 97% in the A,B and fault zones,respectively. Secondly,the stress inversion also indicates that the directions of maximum principal stress σ1 in the A, B,and fault zones are approximately NNW,NWW and NWW,the stress action is mainly horizontal,and strike-slip faulting is dominant in the study area. On the other hand,the direction of the principal stress field in the central Yunnan block changed from NNW to NWW,however,in the region between the Yuanmou and Pudu River faults,the azimuth of the main compressive stress shows that the north-south slip is obvious. While the direction of the main compressive stress of the Xiaojiang fault zone is nearly NW; in the east of the Xiaojiang fault,the direction of principal compressive stress is NW to NNW in the eastern Yunnan block.展开更多
The Luhuatai fault is one of the important buried tectonics in the Yinchuan basin. Based on the results of shallow seismic exploration, we conducted composite drilling section exploration and dating of the samples fro...The Luhuatai fault is one of the important buried tectonics in the Yinchuan basin. Based on the results of shallow seismic exploration, we conducted composite drilling section exploration and dating of the samples from boreholes. Some useful data was obtained, such as the depth of the upper breaking point, the latest activity age, displacement in the late Quaternary, and slip rates, etc. This study shows that the activity is different between the north and south segment along the Luhuatai fault. The north segment is a Holocene fault, while the south segment is a late mid-Pleistocene fault. From north to south along the north segment of Luhuatai fault, the activity has been enhanced, and the faulting is stronger in late Pleistocene than Holocene.展开更多
Study on fault activity is a fundamental part of earthquake prediction and earthquake relief in big cities.In the active fault exploration in Zhengzhou,the spatial distribution,geological features and activity of the ...Study on fault activity is a fundamental part of earthquake prediction and earthquake relief in big cities.In the active fault exploration in Zhengzhou,the spatial distribution,geological features and activity of the Huayuankou fault,the Shangjie fault and the Xushui fault were determined using the seismic prospecting method.New understanding about the characteristics of the faults was gained.This provides reliable basic data for future earthquake forecast and earthquake relief work in Zhengzhou.In addition,we proposed some ways to identify fault activity through analyzing the characteristics of the activity of a fault and raised an effective method for exploring active faults in big cities and exploring concealed faults in regions covered with thick overburdens.展开更多
基金supported by Human Resources Program in Energy Technology of the Korea Institute of Energy Technology Evaluation and Planning (KETEP)granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea. (No. 20164030200980)the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (No. 2015R1A2A1A10052459)
文摘The increasing importance of energy efficiency has led to several studies related to the construction of a reliable low voltage DC(LVDC) distribution system.Specifically, studies on a protection scheme that considers the fault characteristics of an LVDC distribution system are essential to improve system reliability. When compared to a conventional distribution system, the most distinct feature of an LVDC distribution system is the existence of a capacitive discharge current from converters under a fault condition that results in the prompt operation of protection devices. Therefore, this study involves proposing a precise and rapid technique to identify the fault section in an LVDC distribution system. The technique involves two stages, namely: an analysis stage to analyze the capacitive discharge current and a decision stage to identify the fault section based on the fault type. A detailed discussion of each step is presented and its feasibility is verified based on the results of simulations with an ElectroMagnetic Transients Program and MATLAB~?.
基金sponsored by the National Key Technology R&D Program (2006BAC1B03-03-01),Chinathe Joint Earthquake Science Foundation(A07058),China
文摘With waveform data of 613 earthquakes with ML ≥ 2. 5 in the middle section of the Xiaojiang fault and its adjacent area which occurred during January,1998 to September 2007,focal mechanisms were calculated by the direct wave amplitude ratio of S /P in the vertical component and their characteristics were analyzed. According to regional tectonic features of the middle section of the Xiaojiang fault and its adjacent area,the study region was partitioned into two zones with the Xiaojiang fault as the boundary,e. g. zone A and zone B (including the Xiaojiang fault). In order to research the faults stress in detail,the Xiaojiang fault zone was picked out for independent analysis. The study region was also partitioned into 1°× 1° cells with a 0. 5° step. The stress fields of zone A,B and the fault zone were inverted with the FMSI method (Gephart,1990). The results show that first, the faults are mainly of strike-slip in the middle section and its adjacent area,amounting to 81. 28%,69. 23% and 72. 97% in the A,B and fault zones,respectively. Secondly,the stress inversion also indicates that the directions of maximum principal stress σ1 in the A, B,and fault zones are approximately NNW,NWW and NWW,the stress action is mainly horizontal,and strike-slip faulting is dominant in the study area. On the other hand,the direction of the principal stress field in the central Yunnan block changed from NNW to NWW,however,in the region between the Yuanmou and Pudu River faults,the azimuth of the main compressive stress shows that the north-south slip is obvious. While the direction of the main compressive stress of the Xiaojiang fault zone is nearly NW; in the east of the Xiaojiang fault,the direction of principal compressive stress is NW to NNW in the eastern Yunnan block.
基金funded by the Special R&D Fund for Earthquake Study,China (201008003)
文摘The Luhuatai fault is one of the important buried tectonics in the Yinchuan basin. Based on the results of shallow seismic exploration, we conducted composite drilling section exploration and dating of the samples from boreholes. Some useful data was obtained, such as the depth of the upper breaking point, the latest activity age, displacement in the late Quaternary, and slip rates, etc. This study shows that the activity is different between the north and south segment along the Luhuatai fault. The north segment is a Holocene fault, while the south segment is a late mid-Pleistocene fault. From north to south along the north segment of Luhuatai fault, the activity has been enhanced, and the faulting is stronger in late Pleistocene than Holocene.
基金Contribution number for research papers of Research Center of Exploration Geophysics,CEA: RCEG200701
文摘Study on fault activity is a fundamental part of earthquake prediction and earthquake relief in big cities.In the active fault exploration in Zhengzhou,the spatial distribution,geological features and activity of the Huayuankou fault,the Shangjie fault and the Xushui fault were determined using the seismic prospecting method.New understanding about the characteristics of the faults was gained.This provides reliable basic data for future earthquake forecast and earthquake relief work in Zhengzhou.In addition,we proposed some ways to identify fault activity through analyzing the characteristics of the activity of a fault and raised an effective method for exploring active faults in big cities and exploring concealed faults in regions covered with thick overburdens.
