A giant fault-controlled oilfield has been found in the ultra-deep(greater than 6000 m) Ordovician carbonate strata in the northern Tarim Basin. It is of great significance for hydrocarbon accumulation study and oil e...A giant fault-controlled oilfield has been found in the ultra-deep(greater than 6000 m) Ordovician carbonate strata in the northern Tarim Basin. It is of great significance for hydrocarbon accumulation study and oil exploitation to determine the key oil accumulation periods. Based on detailed petrographic analysis, fluid inclusion association(FIA) in calcite samples filling in fractures from 12 wells were analyzed, and key accumulation periods of the strike-slip fault-controlled oilfield was studied by combining oil generation periods of the source rocks, formation periods of the fault and traps, and the fluid inclusion data.(1) There are multiple types of FIA, among them, two types of oil inclusions, the type with yellow fluorescence from the depression area and the type with yellow-green fluorescence from the uplift area with different maturities indicate two oil charging stages.(2) The homogenization temperature of the brine inclusions in FIA is mostly affected by temperature rises, and the minimum temperature of brine inclusions symbiotic with oil inclusions is closer to the reservoir temperature during its forming period.(3) FIA with yellow fluorescence all have homogenization temperatures below 50 ℃, while the FIA with yellow-green fluorescence have homogenization temperatures of 70–90 ℃ tested, suggesting two oil accumulation stages in Middle-Late Caledonian and Late Hercynian.(4) The Middle-Late Ordovician is the key formation period of the strike-slip fault, fracture-cave reservoir and trap there.(5) The oil generation peak of the main source rock of the Lower Cambrian is in the Late Ordovician, and the oil accumulation stage is mainly the Late Ordovician in the depression area, but is mainly the Early Permian in the uplift area. The key oil accumulation period of the strike-slip fault-controlled reservoirs is the Late Caledonian, the depression area has preserved the primary oil reservoirs formed in the Caledonian, while the uplift area has secondary oil reservoirs adjusted from the depression area during the Late Hercynian. Oil reservoir preservation conditions are the key factor for oil enrichment in the strike-slip fault zone of northern Tarim, and the Aman transition zone in the depression is richer in oil and gas and has greater potential for exploration and development.展开更多
Based on the analysis of geological characteristics of ultra-deep fault-controlled fracture-cavity carbonate reservoirs and division of reservoir units, two physical models were made, and physical simulations of oil d...Based on the analysis of geological characteristics of ultra-deep fault-controlled fracture-cavity carbonate reservoirs and division of reservoir units, two physical models were made, and physical simulations of oil displacement by water injection were carried out to find out water flooding mechanism in the fault-controlled fracture-cavity carbonate reservoir under complex flow state. On this basis, a mathematical model of fault-controlled carbonate reservoir with coexisting seepage and free flow has been established. Pilot water injection tests have been carried out to evaluate the effects of enhancing oil recovery by water injection. The results show that: fault-controlled fracture-cavity carbonate reservoir units can be divided into three types:the strong natural energy connected type, the weak natural energy connected type and the weak natural energy isolated type;the fault-fracture activity index of the fault-controlled fractured-cavity body can effectively characterize the connectivity of the reservoir and predict the effective direction of water injection;the mathematical model of fault-controlled carbonate reservoir with coexisting seepage and free flows can quantitatively describe the fluid flow law in the fracture-cavity body;the water injected into the fault-controlled fracture-cavity body is weakly affected by the capillary force of the lithologic body, and the oil-water movement is mainly dominated by gravity. The development modes of single well water injection, unit water injection,and single well high pressure water injection proposed based on the connection structure of fracture-cavity space and well storage space configuration are confirmed effective by pilot tests, with obvious water injection gravity flooding effect.展开更多
Based on outcrop,core,logging,seismic and production data,and the formation of fault-controlled karst reservoirs,the types and characterization of Ordovician fault-controlled karst reservoir architectures in the Tuopu...Based on outcrop,core,logging,seismic and production data,and the formation of fault-controlled karst reservoirs,the types and characterization of Ordovician fault-controlled karst reservoir architectures in the Tuoputai area of the Tahe oilfield are studied.According to the concept of genetic geologic body,the fault-controlled karst reservoir is divided into architecture elements of four levels,the strike-slip fault impact zone is the level-1 architecture element,the fault-controlled karst reservoir the level-2 architecture element,the fracture-cave zone(which can be further subdivided into dissolution cave,dissolution pore and vug,and fracture zones)inside the fault-controlled karst reservoir the level-3 architecture element,and fillings inside caves is the level-4 architecture element(which can be further divided based on the filling degree and lithologic types of the fillings).Specific characterization techniques have been optimized according to the characteristics of various architecture elements.The zone impacted by strike-slip fault is characterized by seismic coherence and artificial interpretation.Under the constraint of zone impacted by strike-slip fault,fault likelihood(FL)property is used to characterize the outline of fault-controlled karst reservoir.Under the constraint of fault-controlled karst reservoir outline,the internal structures are divided based on seismic texture attribute.Finally,the cavern filling pattern is interpreted based on drilling and logging data.The fault-controlled karst reservoirs can be interpreted in 3-dimensional space by architecture element levels,and the characterization technology combining log and seismic data for fault-controlled karst reservoir has been worked out,which has complemented the development theory and technologies for this kind of reservoirs in the Tahe oilfield.展开更多
基金Supported by the National Natural Science Foundation of China (91955204)PetroChina-Southwest Petroleum University Innovation Consortium Science and Technology Cooperation Project (2020CX010101)。
文摘A giant fault-controlled oilfield has been found in the ultra-deep(greater than 6000 m) Ordovician carbonate strata in the northern Tarim Basin. It is of great significance for hydrocarbon accumulation study and oil exploitation to determine the key oil accumulation periods. Based on detailed petrographic analysis, fluid inclusion association(FIA) in calcite samples filling in fractures from 12 wells were analyzed, and key accumulation periods of the strike-slip fault-controlled oilfield was studied by combining oil generation periods of the source rocks, formation periods of the fault and traps, and the fluid inclusion data.(1) There are multiple types of FIA, among them, two types of oil inclusions, the type with yellow fluorescence from the depression area and the type with yellow-green fluorescence from the uplift area with different maturities indicate two oil charging stages.(2) The homogenization temperature of the brine inclusions in FIA is mostly affected by temperature rises, and the minimum temperature of brine inclusions symbiotic with oil inclusions is closer to the reservoir temperature during its forming period.(3) FIA with yellow fluorescence all have homogenization temperatures below 50 ℃, while the FIA with yellow-green fluorescence have homogenization temperatures of 70–90 ℃ tested, suggesting two oil accumulation stages in Middle-Late Caledonian and Late Hercynian.(4) The Middle-Late Ordovician is the key formation period of the strike-slip fault, fracture-cave reservoir and trap there.(5) The oil generation peak of the main source rock of the Lower Cambrian is in the Late Ordovician, and the oil accumulation stage is mainly the Late Ordovician in the depression area, but is mainly the Early Permian in the uplift area. The key oil accumulation period of the strike-slip fault-controlled reservoirs is the Late Caledonian, the depression area has preserved the primary oil reservoirs formed in the Caledonian, while the uplift area has secondary oil reservoirs adjusted from the depression area during the Late Hercynian. Oil reservoir preservation conditions are the key factor for oil enrichment in the strike-slip fault zone of northern Tarim, and the Aman transition zone in the depression is richer in oil and gas and has greater potential for exploration and development.
基金Supported by China National Science and Technology Major Project (2017ZX05008-004)PetroChina Science and Technology Major Project (2018E-18)。
文摘Based on the analysis of geological characteristics of ultra-deep fault-controlled fracture-cavity carbonate reservoirs and division of reservoir units, two physical models were made, and physical simulations of oil displacement by water injection were carried out to find out water flooding mechanism in the fault-controlled fracture-cavity carbonate reservoir under complex flow state. On this basis, a mathematical model of fault-controlled carbonate reservoir with coexisting seepage and free flow has been established. Pilot water injection tests have been carried out to evaluate the effects of enhancing oil recovery by water injection. The results show that: fault-controlled fracture-cavity carbonate reservoir units can be divided into three types:the strong natural energy connected type, the weak natural energy connected type and the weak natural energy isolated type;the fault-fracture activity index of the fault-controlled fractured-cavity body can effectively characterize the connectivity of the reservoir and predict the effective direction of water injection;the mathematical model of fault-controlled carbonate reservoir with coexisting seepage and free flows can quantitatively describe the fluid flow law in the fracture-cavity body;the water injected into the fault-controlled fracture-cavity body is weakly affected by the capillary force of the lithologic body, and the oil-water movement is mainly dominated by gravity. The development modes of single well water injection, unit water injection,and single well high pressure water injection proposed based on the connection structure of fracture-cavity space and well storage space configuration are confirmed effective by pilot tests, with obvious water injection gravity flooding effect.
基金Supported by the Chinese Academy of Sciences Strategic Pilot A Project(XDA14010204)Sinopec Science and Technology Department Project(P18042)China National Science and Technology Major Project(2016ZX05033-003)。
文摘Based on outcrop,core,logging,seismic and production data,and the formation of fault-controlled karst reservoirs,the types and characterization of Ordovician fault-controlled karst reservoir architectures in the Tuoputai area of the Tahe oilfield are studied.According to the concept of genetic geologic body,the fault-controlled karst reservoir is divided into architecture elements of four levels,the strike-slip fault impact zone is the level-1 architecture element,the fault-controlled karst reservoir the level-2 architecture element,the fracture-cave zone(which can be further subdivided into dissolution cave,dissolution pore and vug,and fracture zones)inside the fault-controlled karst reservoir the level-3 architecture element,and fillings inside caves is the level-4 architecture element(which can be further divided based on the filling degree and lithologic types of the fillings).Specific characterization techniques have been optimized according to the characteristics of various architecture elements.The zone impacted by strike-slip fault is characterized by seismic coherence and artificial interpretation.Under the constraint of zone impacted by strike-slip fault,fault likelihood(FL)property is used to characterize the outline of fault-controlled karst reservoir.Under the constraint of fault-controlled karst reservoir outline,the internal structures are divided based on seismic texture attribute.Finally,the cavern filling pattern is interpreted based on drilling and logging data.The fault-controlled karst reservoirs can be interpreted in 3-dimensional space by architecture element levels,and the characterization technology combining log and seismic data for fault-controlled karst reservoir has been worked out,which has complemented the development theory and technologies for this kind of reservoirs in the Tahe oilfield.
