Up to present,the problem of the evaluation of fault diagnosability for nonlinear systems has been investigated by many researchers.However,no attempt has been done to evaluate the diagnosability of multiple faults oc...Up to present,the problem of the evaluation of fault diagnosability for nonlinear systems has been investigated by many researchers.However,no attempt has been done to evaluate the diagnosability of multiple faults occurring simultaneously for nonlinear systems.This paper proposes a method based on differential geometry theories to solve this problem.Then the evaluation of fault diagnosability for affine nonlinear systems with multiple faults occurring simultaneously is achieved.To deal with the effect of control laws on the evaluation results of fault diagnosability,a design scheme of the evaluation of fault diagnosability is proposed.Then the influence of uncertainties on the evaluation results of fault diagnosability for affine nonlinear systems with multiple faults occurring simultaneously is analyzed.The numerical simulation results are obtained to show the effectiveness of the proposed evaluation scheme of fault diagnosability.展开更多
Globalization and rapid growth of network technologies have changed the traditional patterns of device maintenance. E-maintenance has emerged and is widely used in many manufacturing systems. In this paper, a new arch...Globalization and rapid growth of network technologies have changed the traditional patterns of device maintenance. E-maintenance has emerged and is widely used in many manufacturing systems. In this paper, a new architecture of an E-maintenance system is proposed, which consists of E-maintenance centre, embedded CNC gateway and CNC terminal. The E-maintenance centre provides the technical support and service for customers based on Internet and communication technologies. The embedded CNC gateway serves as an agent between the public and plant device network, and provides web-based access for the CNC system. A reconfigurable CNC terminal is highly desired in a signal measuring and analysing system, which is built on the top of component and software bus based models. Finally, the E-maintenance system for the CNC machine is implemented and the experiments show that the architecture of an E-maintenance system can effectively reduce the downtime of devices, the responding time of maintenance work, and increase both the quality and the productivity of enterprises.展开更多
Fault diagnosis is an important area of study with regard to the design and maintenance of multiprocessor systems.A new measure for fault diagnosis of systems,namely,non-inclusive diagnosability(denoted by MM^(*)),was...Fault diagnosis is an important area of study with regard to the design and maintenance of multiprocessor systems.A new measure for fault diagnosis of systems,namely,non-inclusive diagnosability(denoted by MM^(*)),was proposed by Ding et al.In this paper,we establish the non-inclusive diagnosability of a class of regular graphs under the PMC model and the MM^(*)model.As applications,the non-inclusive diagnosabilities of hypercubes,hierarchical hypercubes,folded hypercubes,star graphs,bubble-sort graphs,pancake graphs and dual cubes are determined under the PMC model and the[Math Processing Error]model.展开更多
In the work of Peng et al.(Appl Math Comput 218(21):10406–10412,2012),a new measure was proposed for fault diagnosis of systems:namely g-goodneighbor conditional diagnosability,which requires that any fault-free vert...In the work of Peng et al.(Appl Math Comput 218(21):10406–10412,2012),a new measure was proposed for fault diagnosis of systems:namely g-goodneighbor conditional diagnosability,which requires that any fault-free vertex has at least g fault-free neighbors in the system.In this paper,we establish the g-goodneighbor conditional diagnosability of locally twisted cubes under the PMC model and the MM∗model.展开更多
基金the Natural Science Foundation of Fujian Province,China(2019J05024)the Education Department Foundation of Fujian Province,China(JAT170091).
文摘Up to present,the problem of the evaluation of fault diagnosability for nonlinear systems has been investigated by many researchers.However,no attempt has been done to evaluate the diagnosability of multiple faults occurring simultaneously for nonlinear systems.This paper proposes a method based on differential geometry theories to solve this problem.Then the evaluation of fault diagnosability for affine nonlinear systems with multiple faults occurring simultaneously is achieved.To deal with the effect of control laws on the evaluation results of fault diagnosability,a design scheme of the evaluation of fault diagnosability is proposed.Then the influence of uncertainties on the evaluation results of fault diagnosability for affine nonlinear systems with multiple faults occurring simultaneously is analyzed.The numerical simulation results are obtained to show the effectiveness of the proposed evaluation scheme of fault diagnosability.
基金This paper is supported by the National Science Foundation of China under Grant No.50275061, 50475135the National High Technology Research and Development Program under Grant No.2001AA423230
文摘Globalization and rapid growth of network technologies have changed the traditional patterns of device maintenance. E-maintenance has emerged and is widely used in many manufacturing systems. In this paper, a new architecture of an E-maintenance system is proposed, which consists of E-maintenance centre, embedded CNC gateway and CNC terminal. The E-maintenance centre provides the technical support and service for customers based on Internet and communication technologies. The embedded CNC gateway serves as an agent between the public and plant device network, and provides web-based access for the CNC system. A reconfigurable CNC terminal is highly desired in a signal measuring and analysing system, which is built on the top of component and software bus based models. Finally, the E-maintenance system for the CNC machine is implemented and the experiments show that the architecture of an E-maintenance system can effectively reduce the downtime of devices, the responding time of maintenance work, and increase both the quality and the productivity of enterprises.
基金supported by the National Natural Science Foundation of China(No.11571044)the Natural Science Foundation of Shanxi Province(No.201901D211106)。
文摘Fault diagnosis is an important area of study with regard to the design and maintenance of multiprocessor systems.A new measure for fault diagnosis of systems,namely,non-inclusive diagnosability(denoted by MM^(*)),was proposed by Ding et al.In this paper,we establish the non-inclusive diagnosability of a class of regular graphs under the PMC model and the MM^(*)model.As applications,the non-inclusive diagnosabilities of hypercubes,hierarchical hypercubes,folded hypercubes,star graphs,bubble-sort graphs,pancake graphs and dual cubes are determined under the PMC model and the[Math Processing Error]model.
基金This research was supported by the National Natural Science Foundation of China(Nos.11571044 and 61373021)the Fundamental Research Funds for the Central University of China.
文摘In the work of Peng et al.(Appl Math Comput 218(21):10406–10412,2012),a new measure was proposed for fault diagnosis of systems:namely g-goodneighbor conditional diagnosability,which requires that any fault-free vertex has at least g fault-free neighbors in the system.In this paper,we establish the g-goodneighbor conditional diagnosability of locally twisted cubes under the PMC model and the MM∗model.
