Based on the analysis of a large number of core samples, logging results, logging interpretation data and dynamic data in the study area, the characteristics of Chang 6 reservoir in Zhouguan area of Baihe area are stu...Based on the analysis of a large number of core samples, logging results, logging interpretation data and dynamic data in the study area, the characteristics of Chang 6 reservoir in Zhouguan area of Baihe area are studied, and the favorable reservoir areas in the study area are predicted. The results show that the lithology of Chang 6 reservoir is mainly light gray and gray fine-grained to very fine-grained feldspar lithic sandstone. The pore types are mainly residual intergranular pores and feldspar dissolved pores, including debris dissolved pores and microfractures. The porosity and permeability values are low, which belongs to low porosity-low permeability and ultra-low permeability reservoirs. According to the reservoir distribution characteristics and related data, the Chang 6 reservoir in the study area is divided into two types, mainly Class II and Class III reservoirs. The comprehensive evaluation predicts that the spatial distribution of the favorable area of Chang 6 reservoir is not uniform, but the distribution area is large, which has broad exploration and development value, and provides the necessary conditions for the distribution study of the favorable oil-bearing zone in this area and the preparation for the next exploration and development.展开更多
The marine–continental transitional shale (MCTS) reservoirs of the Longtan Formation (LTF) are widely distributed in the Sichuan Basin. However, the LTF shale exhibits considerable variations in mineral composition a...The marine–continental transitional shale (MCTS) reservoirs of the Longtan Formation (LTF) are widely distributed in the Sichuan Basin. However, the LTF shale exhibits considerable variations in mineral composition and pore characteristics, which makes identifying the 'sweet spot'a challenging task. To address this issue, 10 samples from four typical shale gas wells in the LTF in the southern Sichuan Basin were selected and analyzed for total organic carbon (TOC) content, whole-rock composition using X-ray diffraction (XRD), low-pressure gas adsorption, and high-pressure mercury intrusion. The lithofacies distribution and pore structure of the MCTS were studied to determine the pore structural characteristics and the primary factors influencing pore formation in different types of shale lithofacies in the LTF. The lithofacies of the LTF shale in the study area can be classified into three categories: siliceous clay shale, clay shale and mixed shale. Mineral content has a significant impact on the pore characteristics, while TOC content has a minor effect on the pore volume and specific surface area of micropores and mesopores. It can be inferred that the mesopores in the MCTS are mainly related to clay mineral pores, and mineral dissolution and TOC content are not the primary factors contributing to pore formation.展开更多
The geologic conditions of superimposed basins in China are very complicated. This is mainly shown by multi-phase structural evolution, multiple sets of source-reservoir-cap rock combinations, multiple stages of hydro...The geologic conditions of superimposed basins in China are very complicated. This is mainly shown by multi-phase structural evolution, multiple sets of source-reservoir-cap rock combinations, multiple stages of hydrocarbon generation and expulsion from source rocks, multi-cycle hydrocarbon enrichment and accumulation, and multi-phase reservoir adjustment and reconstruction. The enrichment, accumulation and distribution of hydrocarbon is mainly controlled by the source rock kitchen, paleo- anticline, regional cap rock and intensity of tectonic movement. In this paper, the T-BCMS model has been developed to predict favorable areas of hydrocarbon accumulation in complicated superimposed basins according to time and spatial relationships among five key factors. The five factors include unconformity surface representing tectonic balancing (B), regional cap rock representing hydrocarbon protection (C), paleo-anticline representing hydrocarbon migration and accumulation (M), source rock kitchen representing hydrocarbon generation and expulsion (S) and geological time (T). There are three necessary conditions to form favorable areas of hydrocarbon accumulation. First, four key factors BCMS should be strictly in the order of BCMS from top to bottom. Second, superimposition of four key factors BCMS in the same area is the most favorable for hydrocarbon accumulation. Third, vertically ordered combination and superimposition in the same area of BCMS should occur at the same geological time. The model has been used to predict the most favorable exploration areas in Ordovician in the Tarim Basin in the main hydrocarbon accumulation periods. The result shows that 95% of the discovered Ordovician hydrocarbon reservoirs are located in the predicted areas, which indicates the feasibility and reliability of the key factor matching T-BCMS model for hydrocarbon accumulation and enrichment.展开更多
Superimposed basins in West China have experienced multi-stage tectonic events and multicycle hydrocarbon reservoir formation, and complex hydrocarbon reservoirs have been discovered widely in basins of this kind. Mos...Superimposed basins in West China have experienced multi-stage tectonic events and multicycle hydrocarbon reservoir formation, and complex hydrocarbon reservoirs have been discovered widely in basins of this kind. Most of the complex hydrocarbon reservoirs are characterized by relocation, scale re-construction, component variation and phase state transformation, and their distributions are very difficult to predict. Research shows that regional caprock (C), high-quality sedimentary facies (Deposits, D), paleohighs (Mountain, M) and source rock (S) are four geologic elements contributing to complex hydrocarbon reservoir formation and distribution of western superimposed basins. Longitudinal sequential combinations of the four elements control the strata of hydrocarbon reservoir formation, and planar superimpositions and combinations control the range of hydrocarbon reservoir and their simultaneous joint effects in geohistory determine the time of hydrocarbon reservoir formation. Multiple-element matching reservoir formation presents a basic mode of reservoir formation in superimposed basins, and we recommend it is expressed as T-CDMS. Based on the multiple-element matching reservoir formation mode, a comprehensive reservoir formation index (Tcdms) is developed in this paper to characterize reservoir formation conditions, and a method is presented to predict reservoir formation range and probability of occurrence in superimposed basins. Through application of new theory, methods and technology, the favorable reservoir formation range and probability of occurrence in the Ordovician target zone in Tarim Basin in four different reservoir formation periods are predicted. Results show that central Tarim, Yinmaili and Lunnan are the three most favorable regions where Ordovician oil and gas fields may have formed. The coincidence of prediction results with currently discovered hydrocarbon reservoirs reaches 97 %. This reflects the effectiveness and reliability of the new theory, methods and technology.展开更多
Based on core description,thin section identification,X-ray diffraction analysis,scanning electron microscopy,low-temperature gas adsorption and high-pressure mercury intrusion porosimetry,the shale lithofacies of Sha...Based on core description,thin section identification,X-ray diffraction analysis,scanning electron microscopy,low-temperature gas adsorption and high-pressure mercury intrusion porosimetry,the shale lithofacies of Shan23 sub-member of Permian Shanxi Formation in the east margin of Ordos Basin was systematically analyzed in this study.The Shan23 sub-member has six lithofacies,namely,low TOC clay shale(C-L),low TOC siliceous shale(S-L),medium TOC siliceous shale(S-M),medium TOC hybrid shale(M-M),high TOC siliceous shale(S-H),and high TOC clay shale(C-H).Among them,S-H is the best lithofacies,S-M and M-M are the second best.The C-L and C-H lithofacies,mainly found in the upper part of Shan23 sub-member,generally developed in tide-dominated delta facies;the S-L,S-M,S-H and M-M shales occurring in the lower part of Shan23 sub-member developed in tide-dominated estuarine bay facies.The S-H,S-M and M-M shales have good pore struc-ture and largely organic matter pores and mineral interparticle pores,including interlayer pore in clay minerals,pyrite inter-crystalline pore,and mineral dissolution pore.C-L and S-L shales have mainly mineral interparticle pores and clay mineral in-terlayer pores,and a small amount of organic matter pores,showing poorer pore structure.The C-H shale has organic mi-cro-pores and a small number of interlayer fissures of clay minerals,showing good micro-pore structure,and poor meso-pore and macro-pore structure.The formation of favorable lithofacies is jointly controlled by depositional environment and diagen-esis.Shallow bay-lagoon depositional environment is conducive to the formation of type II2 kerogen which can produce a large number of organic cellular pores.Besides,the rich biogenic silica is conducive to the preservation of primary pores and en-hances the fracability of the shale reservoir.展开更多
Based on the productivity equation of coalbed methane (CBM) well, considering the impact of coal reservoir reformability on gas well productivity, the main production layer optimization index in the “three-step metho...Based on the productivity equation of coalbed methane (CBM) well, considering the impact of coal reservoir reformability on gas well productivity, the main production layer optimization index in the “three-step method” of optimal combination of production layers is corrected, and then the CBM production layer potential index is introduced to evaluate favorable areas for commingled multi-coal seam production. Through analysis of the key parameters of coal reservoirs affecting the CBM productivity index, a development unit division method for areas with multi-coal seams is established, and a quantitative grading index system is proposed. On this basis, the evaluation process of CBM development favorable area is developed: the mature 3-D modeling technology is used to characterize the reservoir physical properties of multi-coal seams in full-scale;the production layer potential index of each grid is calculated, and the production layer potential index contour under single-layer or commingled multi-layer production are plotted;according to the distribution of the contour of production layer potential index, the quantitative index of CBM development unit is adopted to outline the grade I, II, III coal reservoir distribution areas, and thus to pick out the favorable development areas. The practical application in the Yuwang block of Laochang in Yunnan proved that the favorable area evaluation process proposed can effectively overcome the defects of selecting favorable development areas only relying on evaluation results of a major coal seam pay, and enhance the accuracy of the evaluation results, meeting the requirements of selecting favorable areas for multi-coal seam commingled CBM production.展开更多
Background: In recent years, a number of initiatives aimed at promoting healthy lifestyles in health-friendly environments have been implemented.The purpose of this review is to synthesize initiatives conducted in Can...Background: In recent years, a number of initiatives aimed at promoting healthy lifestyles in health-friendly environments have been implemented.The purpose of this review is to synthesize initiatives conducted in Canada and documented in publications for the period 1995–2015 in order to gain a better understanding of their objectives and impacts.Methods: A systematic review of Canadian initiatives published over the past 20 years was conducted from multiple databases(i.e., Scopus,SPORTDiscus, Pub Med, Academic search complete, Reseausante.com, Cairn, and Erudit). In total, 264 publications were identified and retained for the final analysis based on 5 criteria:(1) publication between 1995 and 2015,(2) online availability,(3) research conducted in Canada,(4) main topic related to environments favorable to healthy lifestyles(EFHL), and(5) publication in French or English.Results: A sharp increase in the number of studies on EFHL was observed between 2010 and 2015(57%). Two major lifestyle components—physical activity and nutrition—and 2 environmental aspects—neighborhood and built environment—were the elements most frequently examined regarding adults(48%), young people(34%), and seniors(9%), using quantitative(60%) and qualitative(18%) methods. Furthermore, the analysis reveals a greater focus on the municipal(53%) than the national or provincial levels(31%).Conclusion: This work is a first map of Canadian studies related to EFHL. It clarifies the definition of EFHL and classifies its components. As well,it documents the issues raised, the research methods employed, and the role of stakeholders, while outlining a new research agenda that includes dimensions of EFHL formerly neglected by researchers, namely, political and sociocultural spheres of action.? 2018 Production and hosting by Elsevier B.V. on behalf of Shanghai University of Sport. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).展开更多
The Tacheng basin has been identified as a Carboniferous basement with a central uplift, sur- rounded by orogenic belts. This identification was based on the comprehensive analysis of field outcrops, regional magnetic...The Tacheng basin has been identified as a Carboniferous basement with a central uplift, sur- rounded by orogenic belts. This identification was based on the comprehensive analysis of field outcrops, regional magnetic and gravimetric data, skeleton seismic profiles, magnetotelluric profiles and drilling data. Here, we present gravimetric and magnetic data analyses of the basement structures of the Tacheng basin and its base formation. We also provide a magnetotelluric profile analysis of the structural features and tectonic framework of basin-mountain patterns. We use local geology, drilling data, and other comprehensive information to document the tectonic framework of the basement of the basin. Small-scale nappe structures are found in the northern basin, whereas stronger and more pronounced thrusting structures are found to the south and east of the basin. The basin is divided into four first-order tectonic units: a central uplift, a northern depression, a southeastern depression and a western depression. In addition, the Emin sag is suggested as a possible reservoir for oil and gas.展开更多
The properties of grassy edge-localized modes(ELMs)in EAST in the favorable and unfavorable Btare statistically studied.Statistical analysis indicates that there is no systematical difference in the frequencies of gra...The properties of grassy edge-localized modes(ELMs)in EAST in the favorable and unfavorable Btare statistically studied.Statistical analysis indicates that there is no systematical difference in the frequencies of grassy ELMs under the two different magnetic configurations in the similar parameter spaces.The high-frequency grassy ELM(fELM>1 k Hz)in unfavorable Bt is dependent on the high poloidal betaβpand high triangularityδu,while the high-frequency grassy ELM(fELM>1k Hz)in favorable Btappears to rely on the high plasma density.A frequently occurring phenomenon in favorable Btdefined as‘clustered ELM’seems to be the most evident difference in ELM behavior between favorable and unfavorable Bt.Statistical analysis shows that larger plasma-wall outer gap,longer plasma elongation,lower low-hybrid wave heating power and electron cyclotron resonance heating power favor the occurrence of clustered grassy ELMs.Further studies indicate that the generation of clustered grassy ELMs could be correlated with the lower electron temperature in the bulk plasma.展开更多
1.ObjectivesSouthern Qinghai-northem Tibet permafrost region is a place having the most widespread and most developed permafrost in China with good mineralization conditions and prospecting potentials for gas hydrate ...1.ObjectivesSouthern Qinghai-northem Tibet permafrost region is a place having the most widespread and most developed permafrost in China with good mineralization conditions and prospecting potentials for gas hydrate (Zhu YH et al.,2011). In 2011,China Geological Survey initiated a special national program entitled "Gas hydrate resource exploration and trial mining",which signaled a prelude to a comprehensive gas hydrate survey in southern Qinghai-northern Tibet permafrost region.So far,appreciable progress has been made in the geological,geophysical,geochemical and drilling survey across a number of key blocks.This paper is intended to examine the fundamental conditions for gas hydrate mineralization based on previous findings,delineate favorable zones for gas hydrate mineralization,and to make contributions to the onshore gas hydrate resource exploration in China.展开更多
I will discuss the current international environment China is facing from the following three aspects: First, it is necessary to calmly and obiectively evaluate other countries’ attitude toward China because this inv...I will discuss the current international environment China is facing from the following three aspects: First, it is necessary to calmly and obiectively evaluate other countries’ attitude toward China because this involves their China展开更多
We analyzed the amino acid residues present in the water-soluble and transmembrane proteins of 6 thermophilic and 6 mesophilic species of the domains Archaea and Eubacteria, and characterized them as favorable or unfa...We analyzed the amino acid residues present in the water-soluble and transmembrane proteins of 6 thermophilic and 6 mesophilic species of the domains Archaea and Eubacteria, and characterized them as favorable or unfavorable. The characterization was performed by comparing the observed number of each amino acid residue to the expected number calculated from the percentage of nucleotides present in each gene. Amino acids that were more or less abundant than expected were considered as favorable or unfavorable, respectively. Comparisons of amino acid compositions indicated that the water-soluble proteins were rich in charged residues such as Glu, Asp, Lys, and His, whereas hydrophobic residues such as Trp, Phe, and Leu were abundant in transmembrane proteins. Interestingly, our results found that although the Trp residue was abundant in transmembrane proteins, it was not defined as favorable by our calculations, indicating that increased numbers of a particular amino acid does not necessary indicate it is a favorable residue. Amino acids with high G + C content such as Ala, Gly, and Pro were frequently observed as favorable in species with low G + C content. Comparatively, amino acids with low G + C content such as Phe, Tyr, Lys, Ile, and Met were frequently observed as favorable in species with high G + C content. These are the examples to increase the supply of amino acids than expected. Amino acids with neutral G + C content, i.e., Glu and Asp were favorable in water-soluble proteins from all species analyzed, and Cys was unfavorable both in water-soluble and transmembrane proteins. These results indicate that amino acid compositions are essentially determined by the nucleotide sequence of the genes, and the amino acid content is altered by a deviation from expectation.展开更多
Maximum expansion angle is the primary parameter for the design of expansion section of hypersonic quiet nozzle. According to the quantity of maximum expansion angle, expansion section could be classified as fast expa...Maximum expansion angle is the primary parameter for the design of expansion section of hypersonic quiet nozzle. According to the quantity of maximum expansion angle, expansion section could be classified as fast expansion and slow expansion. In order to diminish the effect of instability of Görtler vortex, gradually, slow expansion was employed for quiet nozzle design. Based on the favorable pressure effect, the maximum expansion angle is optimized in this paper, and a considerable selective session of maximum expansion angle is obtained. The trend that slow expansion is employed instead of fast expansion is explained, and a new method is established for aerodynamic optimization of expansion section contour in a quiet nozzle.展开更多
By using core,logging curves,and experiment data,favorable lithofacies types in the 2 nd Member of Triassic Xujiahe Formation in the Xinchang area,Sichuan Basin were classified,standard of the favorable lithofacies wa...By using core,logging curves,and experiment data,favorable lithofacies types in the 2 nd Member of Triassic Xujiahe Formation in the Xinchang area,Sichuan Basin were classified,standard of the favorable lithofacies was established,planar distribution regularities of the favorable lithofacies were identified,and forming mechanisms of the favorable lithofacies and their control effect on production were examined.(1)The 2 nd Member of Xujiahe Formation has twelve types of lithofacies,among which multiple layer medium-coarse grain sandstone lithofacies,parallel bedding medium-coarse grain sandstone lithofacies,massive bedding medium-coarse grain sandstone lithofacies,inclined bedding medium-coarse grain sandstone lithofacies,and charcoal-bearing medium-coarse grain sandstone lithofacies with better physical properties and higher gas content are favorable lithofacies;they feature low gamma,low neutron porosity,low resistivity,and high acoustic travel time on logging curves.(2)The sedimentary process controls spatial distribution of sand bodies which are the material basis of the favorable lithofacies;post diagenetic fluids would differentially reconstruct the favorable lithofacies;tectonic activities and abnormal formation pressure made strata slide along the weakness plane,giving rise to fractures in different types of rocks,which can enhance the reservoir permeability significantly.(3)The development degree of favorable lithofacies is a major factor affecting stable production of gas well.展开更多
文摘Based on the analysis of a large number of core samples, logging results, logging interpretation data and dynamic data in the study area, the characteristics of Chang 6 reservoir in Zhouguan area of Baihe area are studied, and the favorable reservoir areas in the study area are predicted. The results show that the lithology of Chang 6 reservoir is mainly light gray and gray fine-grained to very fine-grained feldspar lithic sandstone. The pore types are mainly residual intergranular pores and feldspar dissolved pores, including debris dissolved pores and microfractures. The porosity and permeability values are low, which belongs to low porosity-low permeability and ultra-low permeability reservoirs. According to the reservoir distribution characteristics and related data, the Chang 6 reservoir in the study area is divided into two types, mainly Class II and Class III reservoirs. The comprehensive evaluation predicts that the spatial distribution of the favorable area of Chang 6 reservoir is not uniform, but the distribution area is large, which has broad exploration and development value, and provides the necessary conditions for the distribution study of the favorable oil-bearing zone in this area and the preparation for the next exploration and development.
基金supported by the National Natural Science Foundation of China(NNSFC)(Grant No.42272184)2022 Research Program of PetroChina Southwest Oil and Gas Field Company(2022JS-1809).
文摘The marine–continental transitional shale (MCTS) reservoirs of the Longtan Formation (LTF) are widely distributed in the Sichuan Basin. However, the LTF shale exhibits considerable variations in mineral composition and pore characteristics, which makes identifying the 'sweet spot'a challenging task. To address this issue, 10 samples from four typical shale gas wells in the LTF in the southern Sichuan Basin were selected and analyzed for total organic carbon (TOC) content, whole-rock composition using X-ray diffraction (XRD), low-pressure gas adsorption, and high-pressure mercury intrusion. The lithofacies distribution and pore structure of the MCTS were studied to determine the pore structural characteristics and the primary factors influencing pore formation in different types of shale lithofacies in the LTF. The lithofacies of the LTF shale in the study area can be classified into three categories: siliceous clay shale, clay shale and mixed shale. Mineral content has a significant impact on the pore characteristics, while TOC content has a minor effect on the pore volume and specific surface area of micropores and mesopores. It can be inferred that the mesopores in the MCTS are mainly related to clay mineral pores, and mineral dissolution and TOC content are not the primary factors contributing to pore formation.
基金supported by the National Basic Research Program (2006CB202308)
文摘The geologic conditions of superimposed basins in China are very complicated. This is mainly shown by multi-phase structural evolution, multiple sets of source-reservoir-cap rock combinations, multiple stages of hydrocarbon generation and expulsion from source rocks, multi-cycle hydrocarbon enrichment and accumulation, and multi-phase reservoir adjustment and reconstruction. The enrichment, accumulation and distribution of hydrocarbon is mainly controlled by the source rock kitchen, paleo- anticline, regional cap rock and intensity of tectonic movement. In this paper, the T-BCMS model has been developed to predict favorable areas of hydrocarbon accumulation in complicated superimposed basins according to time and spatial relationships among five key factors. The five factors include unconformity surface representing tectonic balancing (B), regional cap rock representing hydrocarbon protection (C), paleo-anticline representing hydrocarbon migration and accumulation (M), source rock kitchen representing hydrocarbon generation and expulsion (S) and geological time (T). There are three necessary conditions to form favorable areas of hydrocarbon accumulation. First, four key factors BCMS should be strictly in the order of BCMS from top to bottom. Second, superimposition of four key factors BCMS in the same area is the most favorable for hydrocarbon accumulation. Third, vertically ordered combination and superimposition in the same area of BCMS should occur at the same geological time. The model has been used to predict the most favorable exploration areas in Ordovician in the Tarim Basin in the main hydrocarbon accumulation periods. The result shows that 95% of the discovered Ordovician hydrocarbon reservoirs are located in the predicted areas, which indicates the feasibility and reliability of the key factor matching T-BCMS model for hydrocarbon accumulation and enrichment.
基金the State Key Basic Research Plan 973 Project(2006CB202308)
文摘Superimposed basins in West China have experienced multi-stage tectonic events and multicycle hydrocarbon reservoir formation, and complex hydrocarbon reservoirs have been discovered widely in basins of this kind. Most of the complex hydrocarbon reservoirs are characterized by relocation, scale re-construction, component variation and phase state transformation, and their distributions are very difficult to predict. Research shows that regional caprock (C), high-quality sedimentary facies (Deposits, D), paleohighs (Mountain, M) and source rock (S) are four geologic elements contributing to complex hydrocarbon reservoir formation and distribution of western superimposed basins. Longitudinal sequential combinations of the four elements control the strata of hydrocarbon reservoir formation, and planar superimpositions and combinations control the range of hydrocarbon reservoir and their simultaneous joint effects in geohistory determine the time of hydrocarbon reservoir formation. Multiple-element matching reservoir formation presents a basic mode of reservoir formation in superimposed basins, and we recommend it is expressed as T-CDMS. Based on the multiple-element matching reservoir formation mode, a comprehensive reservoir formation index (Tcdms) is developed in this paper to characterize reservoir formation conditions, and a method is presented to predict reservoir formation range and probability of occurrence in superimposed basins. Through application of new theory, methods and technology, the favorable reservoir formation range and probability of occurrence in the Ordovician target zone in Tarim Basin in four different reservoir formation periods are predicted. Results show that central Tarim, Yinmaili and Lunnan are the three most favorable regions where Ordovician oil and gas fields may have formed. The coincidence of prediction results with currently discovered hydrocarbon reservoirs reaches 97 %. This reflects the effectiveness and reliability of the new theory, methods and technology.
基金China National Science and Technology Major Project(2017ZX05035).
文摘Based on core description,thin section identification,X-ray diffraction analysis,scanning electron microscopy,low-temperature gas adsorption and high-pressure mercury intrusion porosimetry,the shale lithofacies of Shan23 sub-member of Permian Shanxi Formation in the east margin of Ordos Basin was systematically analyzed in this study.The Shan23 sub-member has six lithofacies,namely,low TOC clay shale(C-L),low TOC siliceous shale(S-L),medium TOC siliceous shale(S-M),medium TOC hybrid shale(M-M),high TOC siliceous shale(S-H),and high TOC clay shale(C-H).Among them,S-H is the best lithofacies,S-M and M-M are the second best.The C-L and C-H lithofacies,mainly found in the upper part of Shan23 sub-member,generally developed in tide-dominated delta facies;the S-L,S-M,S-H and M-M shales occurring in the lower part of Shan23 sub-member developed in tide-dominated estuarine bay facies.The S-H,S-M and M-M shales have good pore struc-ture and largely organic matter pores and mineral interparticle pores,including interlayer pore in clay minerals,pyrite inter-crystalline pore,and mineral dissolution pore.C-L and S-L shales have mainly mineral interparticle pores and clay mineral in-terlayer pores,and a small amount of organic matter pores,showing poorer pore structure.The C-H shale has organic mi-cro-pores and a small number of interlayer fissures of clay minerals,showing good micro-pore structure,and poor meso-pore and macro-pore structure.The formation of favorable lithofacies is jointly controlled by depositional environment and diagen-esis.Shallow bay-lagoon depositional environment is conducive to the formation of type II2 kerogen which can produce a large number of organic cellular pores.Besides,the rich biogenic silica is conducive to the preservation of primary pores and en-hances the fracability of the shale reservoir.
基金Supported by the National Natural Science Foundation of China(No.41772155)the National Science and Technology Major Project of China(No.2016ZX05044-002)the Fundamental Research Funds for the Central Universities of China(No.2015XKZD07)
文摘Based on the productivity equation of coalbed methane (CBM) well, considering the impact of coal reservoir reformability on gas well productivity, the main production layer optimization index in the “three-step method” of optimal combination of production layers is corrected, and then the CBM production layer potential index is introduced to evaluate favorable areas for commingled multi-coal seam production. Through analysis of the key parameters of coal reservoirs affecting the CBM productivity index, a development unit division method for areas with multi-coal seams is established, and a quantitative grading index system is proposed. On this basis, the evaluation process of CBM development favorable area is developed: the mature 3-D modeling technology is used to characterize the reservoir physical properties of multi-coal seams in full-scale;the production layer potential index of each grid is calculated, and the production layer potential index contour under single-layer or commingled multi-layer production are plotted;according to the distribution of the contour of production layer potential index, the quantitative index of CBM development unit is adopted to outline the grade I, II, III coal reservoir distribution areas, and thus to pick out the favorable development areas. The practical application in the Yuwang block of Laochang in Yunnan proved that the favorable area evaluation process proposed can effectively overcome the defects of selecting favorable development areas only relying on evaluation results of a major coal seam pay, and enhance the accuracy of the evaluation results, meeting the requirements of selecting favorable areas for multi-coal seam commingled CBM production.
文摘Background: In recent years, a number of initiatives aimed at promoting healthy lifestyles in health-friendly environments have been implemented.The purpose of this review is to synthesize initiatives conducted in Canada and documented in publications for the period 1995–2015 in order to gain a better understanding of their objectives and impacts.Methods: A systematic review of Canadian initiatives published over the past 20 years was conducted from multiple databases(i.e., Scopus,SPORTDiscus, Pub Med, Academic search complete, Reseausante.com, Cairn, and Erudit). In total, 264 publications were identified and retained for the final analysis based on 5 criteria:(1) publication between 1995 and 2015,(2) online availability,(3) research conducted in Canada,(4) main topic related to environments favorable to healthy lifestyles(EFHL), and(5) publication in French or English.Results: A sharp increase in the number of studies on EFHL was observed between 2010 and 2015(57%). Two major lifestyle components—physical activity and nutrition—and 2 environmental aspects—neighborhood and built environment—were the elements most frequently examined regarding adults(48%), young people(34%), and seniors(9%), using quantitative(60%) and qualitative(18%) methods. Furthermore, the analysis reveals a greater focus on the municipal(53%) than the national or provincial levels(31%).Conclusion: This work is a first map of Canadian studies related to EFHL. It clarifies the definition of EFHL and classifies its components. As well,it documents the issues raised, the research methods employed, and the role of stakeholders, while outlining a new research agenda that includes dimensions of EFHL formerly neglected by researchers, namely, political and sociocultural spheres of action.? 2018 Production and hosting by Elsevier B.V. on behalf of Shanghai University of Sport. This is an open access article under the CC BY-NC-ND license(http://creativecommons.org/licenses/by-nc-nd/4.0/).
文摘The Tacheng basin has been identified as a Carboniferous basement with a central uplift, sur- rounded by orogenic belts. This identification was based on the comprehensive analysis of field outcrops, regional magnetic and gravimetric data, skeleton seismic profiles, magnetotelluric profiles and drilling data. Here, we present gravimetric and magnetic data analyses of the basement structures of the Tacheng basin and its base formation. We also provide a magnetotelluric profile analysis of the structural features and tectonic framework of basin-mountain patterns. We use local geology, drilling data, and other comprehensive information to document the tectonic framework of the basement of the basin. Small-scale nappe structures are found in the northern basin, whereas stronger and more pronounced thrusting structures are found to the south and east of the basin. The basin is divided into four first-order tectonic units: a central uplift, a northern depression, a southeastern depression and a western depression. In addition, the Emin sag is suggested as a possible reservoir for oil and gas.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(No.2017YFE0301300)National Natural Science Foundation of China(Nos.12005257 and 11905143)+1 种基金the Key Research Program of Frontier Sciences,the CASHIPS Director’s Fund(No.YZJJ2020QN13)Special Research Assistant Funding of CAS and China Postdoctoral Science Foundation(No.2020M671913)。
文摘The properties of grassy edge-localized modes(ELMs)in EAST in the favorable and unfavorable Btare statistically studied.Statistical analysis indicates that there is no systematical difference in the frequencies of grassy ELMs under the two different magnetic configurations in the similar parameter spaces.The high-frequency grassy ELM(fELM>1 k Hz)in unfavorable Bt is dependent on the high poloidal betaβpand high triangularityδu,while the high-frequency grassy ELM(fELM>1k Hz)in favorable Btappears to rely on the high plasma density.A frequently occurring phenomenon in favorable Btdefined as‘clustered ELM’seems to be the most evident difference in ELM behavior between favorable and unfavorable Bt.Statistical analysis shows that larger plasma-wall outer gap,longer plasma elongation,lower low-hybrid wave heating power and electron cyclotron resonance heating power favor the occurrence of clustered grassy ELMs.Further studies indicate that the generation of clustered grassy ELMs could be correlated with the lower electron temperature in the bulk plasma.
文摘1.ObjectivesSouthern Qinghai-northem Tibet permafrost region is a place having the most widespread and most developed permafrost in China with good mineralization conditions and prospecting potentials for gas hydrate (Zhu YH et al.,2011). In 2011,China Geological Survey initiated a special national program entitled "Gas hydrate resource exploration and trial mining",which signaled a prelude to a comprehensive gas hydrate survey in southern Qinghai-northern Tibet permafrost region.So far,appreciable progress has been made in the geological,geophysical,geochemical and drilling survey across a number of key blocks.This paper is intended to examine the fundamental conditions for gas hydrate mineralization based on previous findings,delineate favorable zones for gas hydrate mineralization,and to make contributions to the onshore gas hydrate resource exploration in China.
文摘I will discuss the current international environment China is facing from the following three aspects: First, it is necessary to calmly and obiectively evaluate other countries’ attitude toward China because this involves their China
文摘We analyzed the amino acid residues present in the water-soluble and transmembrane proteins of 6 thermophilic and 6 mesophilic species of the domains Archaea and Eubacteria, and characterized them as favorable or unfavorable. The characterization was performed by comparing the observed number of each amino acid residue to the expected number calculated from the percentage of nucleotides present in each gene. Amino acids that were more or less abundant than expected were considered as favorable or unfavorable, respectively. Comparisons of amino acid compositions indicated that the water-soluble proteins were rich in charged residues such as Glu, Asp, Lys, and His, whereas hydrophobic residues such as Trp, Phe, and Leu were abundant in transmembrane proteins. Interestingly, our results found that although the Trp residue was abundant in transmembrane proteins, it was not defined as favorable by our calculations, indicating that increased numbers of a particular amino acid does not necessary indicate it is a favorable residue. Amino acids with high G + C content such as Ala, Gly, and Pro were frequently observed as favorable in species with low G + C content. Comparatively, amino acids with low G + C content such as Phe, Tyr, Lys, Ile, and Met were frequently observed as favorable in species with high G + C content. These are the examples to increase the supply of amino acids than expected. Amino acids with neutral G + C content, i.e., Glu and Asp were favorable in water-soluble proteins from all species analyzed, and Cys was unfavorable both in water-soluble and transmembrane proteins. These results indicate that amino acid compositions are essentially determined by the nucleotide sequence of the genes, and the amino acid content is altered by a deviation from expectation.
文摘Maximum expansion angle is the primary parameter for the design of expansion section of hypersonic quiet nozzle. According to the quantity of maximum expansion angle, expansion section could be classified as fast expansion and slow expansion. In order to diminish the effect of instability of Görtler vortex, gradually, slow expansion was employed for quiet nozzle design. Based on the favorable pressure effect, the maximum expansion angle is optimized in this paper, and a considerable selective session of maximum expansion angle is obtained. The trend that slow expansion is employed instead of fast expansion is explained, and a new method is established for aerodynamic optimization of expansion section contour in a quiet nozzle.
基金Supported by the China National Science and Technology Major Project(2016ZX05002-006)Sinopec Science and Technology Department Project(P18089-4)
文摘By using core,logging curves,and experiment data,favorable lithofacies types in the 2 nd Member of Triassic Xujiahe Formation in the Xinchang area,Sichuan Basin were classified,standard of the favorable lithofacies was established,planar distribution regularities of the favorable lithofacies were identified,and forming mechanisms of the favorable lithofacies and their control effect on production were examined.(1)The 2 nd Member of Xujiahe Formation has twelve types of lithofacies,among which multiple layer medium-coarse grain sandstone lithofacies,parallel bedding medium-coarse grain sandstone lithofacies,massive bedding medium-coarse grain sandstone lithofacies,inclined bedding medium-coarse grain sandstone lithofacies,and charcoal-bearing medium-coarse grain sandstone lithofacies with better physical properties and higher gas content are favorable lithofacies;they feature low gamma,low neutron porosity,low resistivity,and high acoustic travel time on logging curves.(2)The sedimentary process controls spatial distribution of sand bodies which are the material basis of the favorable lithofacies;post diagenetic fluids would differentially reconstruct the favorable lithofacies;tectonic activities and abnormal formation pressure made strata slide along the weakness plane,giving rise to fractures in different types of rocks,which can enhance the reservoir permeability significantly.(3)The development degree of favorable lithofacies is a major factor affecting stable production of gas well.