Boosting MA-based two-dimensional Ruddlesden-Popper perovskite solar cells by incorporating a binary spacer

Two-dimensional Ruddlesden-Popper(2DRP)perovskite exhibits excellent stability in perovskite solar cells(PSCs)due to introducing hydrophobic long-chain organic spacers.However,the poor charge transporting property of bulky organic cation spacers limits the performance of 2DRP PSCs.Inspired by the Asite cation alloying strategy in 3D perovskites,2DRP perovskites with a binary spacer can promote charge transporting compared to the unary spacer counterparts.Herein,the superior MA-based 2DRP perovskite films with a binary spacer,including 3-guanidinopropanoic acid(GPA)and 4-fluorophenethylamine(FPEA)are realized.These films(GPA_(0.85)FPEA_(0.15))_(2)MA_(4)Pb_5I_(16)show good morphology,large grain size,decreased trap state density,and preferential orientation of the as-prepared film.Accordingly,the present 2DRP-based PSC with the binary spacer achieves a remarkable efficiency of 18.37%with a V_(OC)of1.15 V,a J_(SC)of 20.13 mA cm^(-2),and an FF of 79.23%.To our knowledge,the PCE value should be the highest for binary spacer MA-based 2DRP(n≤5)PSCs to date.Importantly,owing to the hydrophobic fluorine group of FPEA and the enhanced interlayer interaction by FPEA,the unencapsulated 2DRP PSCs based on binary spacers exhibit much excellent humidity stability and thermal stability than the unary spacer counterparts.

Spacer区蛋白对ADAMTS13活性影响的研究

目的:本研究旨在获得血管性血友病因子裂解酶ADAMTS13中重组的spacer区蛋白,进一步探讨该区域对ADAMTS13功能发挥的作用。方法:以ADAMTS13全长质粒为模板,构建含spacer区基因序列的原核表达质粒,转染大肠杆菌,低温(30℃)IPTG诱导表达,收集超声上清并鉴定。并大规模诱导表达,利用Ni-NTA琼脂糖柱,梯度咪唑淋洗法纯化蛋白,应用SDS-PAGE和Western blot法鉴定纯化产品纯度和免疫学活性。利用重组蛋白与免疫性调节的血栓性血小板减少性紫癜(iTTP)患者血浆孵育,检测血浆中ADAMTS13的活性变化。结果:成功构建能表达spacer区的原核表达质粒并能有效表达蛋白。Western blotting结果显示,抗6×His抗体和抗人ADAMTS13抗体(针对Gln34-Trp688)分别能与重组蛋白在15 kDa处显单一条带。功能实验表明,该重组蛋白能够有效逆转iTTP患者中被自身抗体抑制的ADAMTS13酶活性。结论:重组蛋白具有较好的免疫原活性和纯度,为进一步研究spacer区对iTTP的发病机理提供了实验依据。

Spacer(垫隔粉)微粒喷洒密度和均匀性自动检测系统及其图像处理

应用计算机图像处理技术和机器视觉实现对SPACER(垫隔粉 )微粒喷洒密度和均匀性的自动检测。阐述SPACER(垫隔粉 )微粒密度自动测量系统的基本组成及工作原理。着重讨论了图像处理算法。

A preliminary analysis of phylogenetic relationships of Arundinaria and related genera based on nucleotide sequences of nrDNA （ITS region） and cpDNA （trnL-F intergenic spacer）

Phylogenetic relationships of Arundinaria and related genera (Pleioblastus, Pseudosasa, Oligostachyum, Bashania, Clavinodum, etc.) were assessed by analyzing the sequences of the nrDNA internal transcribed spacer (ITS) and the cpDNA trnL-F intergenic spacer (IGS). Comparison with trnL-F IGS sequence, the ITS region provided the higher number of parsimony informative characters, and the interspecific variation of the ITS sequence was higher than that of the trnL-F IGS sequence.The tree obtained by combining both sets of data showed that the species sampled in Arundinaria and the related genera were monophyletic and divided into two clades. The relationships and positioning of all the taxa surveryed (including A. oleosa, A. hsienchuensis, A. chino, A. amara, A. yixingensis, A. amabilis, A. fortunei, A. pygmaea, A. gramineus, A. fargesii, A. faberi, A. hupehense, Pseudosasa japonica cv. Tsutsumiana, P. japonica and Brachystachyum densiflorum) were also discussed. The results from the sequences were broadly consistent with morphological characters, appearing all these taxa sampled belong to the genus of Arundinaria. The topologies of the trees generated from individual data and the combined data were similar.

Development and Evaluation of a New Nanometer Based Spacer NMS-I

In view of the inadequate cementing quality in the cementation for long isolation intervals ofoil and gas wells, and considering the field practice in Tarim Oilfield, a nanometer material LC-212 was introduced as the base stock to experimentally develop a new spacer system NMS-I, in combination with other materials, including a chemical gel plugging agent, carboxymethyl cellulose and barite. Experimental results indicated that the system had a wide adjustable range of density, good rheological property, static stability and compatibility with cement slurry. It also showed no flocculating or thickening effect on the water-base drilling fluid and low-density cement system. Meanwhile, the capacity of lost circulation control and the influence of the spacer on the second interfacial cementing strength were evaluated by a self-made lost circulation simulator and shearing test facility. The results showed that the spacer had favorable plugging and flushing effect, and the second interfacial cementing strength can be greatly improved. Moreover, based on the experiments, the mechanisms of spacer function were analyzed. The results obtained from the investigation offer a novel approach to resolving some practical problems in cementing jobs.

Synthesis and Properties of Gemini Cationic Surfactants with Amide Spacers

Four gemini cationic surfactants {N,N′-di[2-(lauryldimethylamino)acetyl]polymethylenediamine dichloride, LAA-s-LAA, s=2,3,4,6} were synthesized by using four bis(α-chloroacetamide)s and N,N-dimethyllaurylamine, respectively. The molecular structures were characterized by means of IR, ~ 1H NMR, \{~ ~13 C NMR\} and MS, and the behavior of their aqueous solutions was studied. The critical micell concentrations(CMC) of LAA-s-LAA were one order of magnitude lower than that of dodecyltrimethyl ammonium chloride(DTAC). With the change of the length of spacer chain(s), their CMC values change, and CMC reaches the top value at s=4.

Phylogeny of Ptychostomum (Bryaceae,Musci) inferred from sequences of nuclear ribosomal DNA internal transcribed spacer (ITS) and chloroplast rps4

The phylogeny of Ptychostomum was first spacer （ITS） region of the nuclear ribosomal （nr） DNA DNA rps4 sequences. Maximum parsimony, maximum undertaken based on analysis of the internal transcribed and by combining data from nrDNA ITS and chloroplast likelihood, and Bayesian analyses all support the conclusion that the reinstated genus Ptychostomum is not monophyletic. Ptychostomum funkii （Schwagr.） J. R. Spence （≡ Bryum funkii Schwaigr.） is placed within a clade containing the type species of Bryum, B. argenteum Hedw. The remaining members of Ptychostomum investigated in the present study constitute another well-supported clade. The results are congruent with previous molecular analyses. On the basis of phylogenetic evidence, we agree with transferring B. amblyodon Mull. Hal. （≡ B. inclinatum （Brid.） Turton≡ Bryum archangelicum Bruch ＆ Schimp.）, Bryum lonchocaulon Mull. Hal., Bryum pallescens Schleich. ex Schwaigr., and Bryum pallens Sw. to Ptychostomum.

Effect of spacer length on the liquid crystalline property of azobenzene-containing ABA-type triblock copolymers via ATRP

The effect of flexible spacer length on the liquid crystalline property of ABA-type triblock copolymers containing azobenzene groups was investigated. For the study, the monomers, n-[4-(4-ethoxyphenylazo)phenoxy]alkyl methacrylates with varying methylene groups (n = 0, 2, 6) were used to synthesize a series of azobenzene-containing amphiphilic triblock copolymers PAnC–PEG–PAnC by atom transfer radical polymerization (ATRP). Differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and one-dimensional X-ray diffraction (1D WAXD) have shown that the glass transition temperatures of these copolymers decreased with increasing n, PA0C–PEG–PA0C has no mesophase, while both PA2C–PEG–PA2C and PA6C–PEG–PA6C have a nematic mesophase. These differences derive from the length of spacer groups between the polymer backbone and side-chain LC monomers.

Influence of spacer insulator material temperature characteristics on its electric properties

Spacer insulators are important insulating component of gas insulated switchgear(GIS). In order to analyze the influence of spacer insulator materials temperature characteristics on the electric performance, we tested the temperature distribution under work condition and the temperature characteristics of the material's relative permittivity. Then established a spacer insulator simulation model in finite element numerical simulation software to calculate its temperature and electric field. Using the temperature test results as a reference to verify the temperature calculation, and in order to analyze changes of the electric field along the surface of the spacer insulator, the temperature characteristics of relative permittivity have to be considered. Through the experimental research and simulation analysis, we found that the temperature characteristics of the spacer insulator materials have great impacts on the spacer insulator performance. When the temperature increases, the material relative permittivity also increases. In the low-temperature region of spacer insulator, the electric field intensity along the surface increases, so the electrical performance deteriorates. The conclusion of this paper can provide an important reference for further research about spacer insulator's working performance analysis.

Current role of spacers for prostate cancer radiotherapy

Radiotherapy is an established curative treatment method for prostate cancer. Optimal tumor control rates can only be achieved with high local doses,associated with a considerable risk of rectal toxicity. Apart from already widely adapted technical advances,as intensitymodulated radiation therapy,the application of spacers placed between the prostate and rectum has been increasingly used in the last years. Biodegradable spacers,including hydrogel,hyaluronic acid,collagen or an implantable balloon,can be injected or inserted in a short procedure under transrectal ultrasound guidance via a transperineal approach. A distance of about 1.0-1.5 cm is usually achieved between the rectum and prostate,excluding the rectal wall from the high isodoses. Several studies have shown well tolerated injection procedures and treatments. Apart from considerable reduction of rectal irradiation,a prospective randomized trial demonstrated a reduction of rectal toxicity after hydrogel injection in men undergoing prostate image-guided intensity-modulated radiation therapy. The results are encouraging for continuing evaluation in dose escalation,hypofractionation,stereotactic radiotherapy or re-irradiation trials in the future.

Intergenic spacer 1(IGS1) polymorphism map: A marker for the initial classification of cultivated Lentinula edodes strains in China

China is currently the world＇s leading producer of Lentinula edodes and owns many cultivated strains of this species. This study was performed in order to investigate intergenic spacer I （IGS1） polymorphism and classification among 49 popular cultivated strains. The great majority of the 49 strains possessed two different IGS1 sequences, with distinct lengths and homologies. Based on the length and homology of the IGS1 sequences of the 49 strains, the strains were classified into two groups： A and B. Group A was subdivided into six subgroups. Forty-seven strains were homozygous or heterozygous among these six subgroups in group A, Cr01 was heterozygous between A and B, and Guangxiang 9 was homozygous in group B. An IGS1 polymorphism map of each cultivated L. edodes strain is reported for the first time and could be used as a marker for the initial classification and management of cultivated L. edodes strains in China.

Discrepancy of the magnetic behaviors and crystalline structure on the Co/FeMn and FeMn/Co interfaces with ultrathin Pt spacer

The exchange coupling at the ferromagnetic/antiferromagnetic （FM/AFM） interface is influenced by both the magnetic structure and the crystalline micro-structure. Co/FeMn/Co thin films with 0.4 nm Pt spacer layer inserted into the Co/FeMn and FeMn/Co interface respectively were deposited by means of magnetron sputtering. The two interfaces upon and beneath the FeMn layer show distinct behaviors before and after the Pt spacer inserted. There is a remarkable shrink of the interracial uncompensated spins within the FeMn bottom interracial monolayers, whereas a relaxation of the pinning strength of the FeMn interfacial spins along the out-of-plane direction occurs at the top in- terface. XRD analysis indicates the Pt layer upon the FeMn layer forms an fcc （002） texture, implying the magnetic discrepancy between the top and bottom FeMn interfaces has crystalline structural origins.

Single-phase Computational Fluid Dynamics Applicability for the Study of Three-dimensional Flow in 5×5 Rod Bundles with Spacer Grids

Spacer grids play an important role in pressurized water reactor（PWR） fuel assembly in that they have significant influence on the thermal-hydraulic characteristics of the reactor core.But so far,the numerical studies are performed without regarding dimple and spring of spacer grids,just considering mixing vane.Moreover,these studies use k-ε turbulence model without considering the suitability of the other turbulence models upon the different spacer grids flow.A study is carried out to understand the 3-D single-phase flow in AFA-2G 5×5 rod bundles with spacer grids based on numerical method.In order to investigate the suitability of different turbulence models,k-ε model and k-ω model,the influence of different parts of spacer grid on the fluid flow is also predicted.By using second-order upwind scheme,hybrid grids technique,and improved SIMPLEC algorithm,the Reynolds averaged mass conservation and momentum conservation equations are solved,and the pressure and velocity field of flow are obtained.The numerical simulation results are compared with experiment results and the agreement is satisfactory.The simulation results show the influences of the spring,dimple and mixing vane,and the different characteristics of the k-ε model and k-ω model.Comparing with the experiment results,the simulation results suggest that the k-ω model is suitable for the simulation of the rod bundle flow with spacer grids;the spring and dimple are the main causes of the pressure loss in the spacer grid channel.The friction coefficient of the channel with spring and dimple is 1.5 times the coefficient of the channel with the vane.These results are beneficial to enhance the simulation ability of spacer grids flow and optimization design ability of spaces grid.

Synthesis and application of rhodamine-based fluorescent probe dyes with spacer linker arm

When rhodamine-based fluorescent probe dyes are used to track target molecules they always perturb the behavior of target molecules because of steric hindrance effect. In order to minimize potential steric problems, a kind of rhodamine-based fluorescent probe dye with spacer linker arm was designed and synthesized and its application in immunofluorescence histochemistry was investigated.

Polysiloxane with Pendant Benzo Crown Ether via a Spacer of Undecyloxymethyl as Stationary Phase for Capillary Chromatography

ＰｏｌｙｓｉｌｏｘａｎｅｗｉｔｈＰｅｎｄａｎｔＢｅｎｚｏＣｒｏｗｎＥｔｈｅｒｖｉａａＳｐａｃｅｒｏｆＵｎｄｅｃｙｌｏｘｙｍｅｔｈｙｌａｓＳｔａｔｉｏｎａｒｙＰｈａｓｅｆｏｒＣａｐｉｌｌａｒｙＣｈｒｏｍａｔｏｇｒａｐｈｙＬＵＸｕｅ－ｒａｎ；ＺＨＡＮＧＬ...

INFLUENCE OF THE NONMAGNETIC METAL SPACER ON THE MAGNETIC PROPERTIES AND MICROSTRUCTURE OF THE MULTILAYER FILMS

Ta / NiFe/Bi （ Ag, Cu ）/FeMn/Ta and Ta / NiFe1/FeMn / Bi （ Ag, Cu ）/NiFen/Ta films were prepared by magnetic sputtering. The texture and the dependences of the exchange-coupling field on the thickness of Bi, Ag, and Cu in Ta/NiFe/Bi（Ag, Cu） /FeMn/Ta and Ta/NiFe/FeMn/Bi（Ag, Cu）/NiFe/Ta films were studied. XPS results indicate that the Bi atoms migrated into the FeMn layer during the deposition process and a FeMnBi alloy was probably formed or the Bi atoms existed as an impurity in the FeMn layer in Ta/NiFe/Bi（Ag, Cu ）/FeMn/Ta. Otherwise, in Ta/NiFe/FeMn/Bi （Ag, Cu）/NiFe/Ta films, Bi, Ag, and Cu atoms do not remain entirely at the interface of the FeMn/ NiFeⅡfilm, but at least partly segregate to the surface of the NiFe film.

An improved PCR method for direct identification of Porphyra(Bangiales,Rhodophyta) using conchocelis based on a RUBISCO intergenic spacer

An improved method of PCR in which the small segment of conchocelis is amplified directly without DNA extraction was used to amplify a RUBISCO intergenic spacer DNA fragment from nine species of red algal genus Porphyra(Bangiales,Rhodophyta),including Porphyra yezoensis(Jiangsu,China),P.haitanensis(Fujian,China),P.oligospermatangia(Qingdao,China),P.katadai(Qingdao,China),P.tenera(Qingdao,China),P.suborboculata(Fujian,China),P.pseudolinearis(Kogendo,Korea),P.linearis(Devon,England),and P.fallax(Seattle,USA).Standard PCR and the method developed here were both conducted using primers specific for the RUBISCO spacer region,after which the two PCR products were sequenced.The sequencing data of the amplicons obtained using both methods were identical,suggesting that the improved PCR method was functional.These findings indicate that the method developed here may be useful for the rapid identification of species of Porphyra in a germplasm bank.In addition,a phylogenetic tree was constructed using the RUBISCO spacer and partial rbcS sequence,and the results were in concordant with possible alternative phylogenies based on traditional morphological taxonomic characteristics,indicating that the RUBISCO spacer is a useful region for phylogenetic studies.

Application of the first internal transcribed spacer(ITS-1)of ribosomal DNA as a molecular marker to population analysis in farrer's scallop Chlamys farreri

Sequence variation of the first internal transcribed spacer of ribosomal DNA （ ITS - 1 ） was examined and its application to the study of genetic variation was explored in four populations of farter＇ s scallop Chlamys farreri. ITS - 1 fragments, with a length of about 300 bp,of 78 individuals collected from Dalian, Qingdao, Yantai in China and Korea respectively were amplified via PCR, cloned and sequenced. Intra-genomic variation was examined by sequencing several clones of single individuals. Alignment and polymorphism analysis detected 44 haplotypes and 50 polymorphic sites which consist of 30 substitutions and 20 indels, indicating a high level of polymorphisms. Sequence analysis also showed a very low level of intra-individual variation. All these features validated the feasibility of application of ITS - 1 fragment to population analysis. Polymorphism analysis showed that the Korea sample has the richest genetic variation, followed by Yantai and Qingdao samples. AMOVA （analysis of molecular variance） showed that the majority （96.26%） of genetic variation was distributed within populations and 3.74% resulted from among populations, but with P 〈 0.05 （ = 0.042）, indicating that the populations in this study have significant divergence. This output was basically concordant with the result arising from RAPD data and different from that from mitochondrial 16S rDNA sequence data. Discussion on this inconsistency was made accordingly.

Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells

All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)into backbones of polymer donor(P_(D))or polymer acceptor(P_(A))has been demonstrated as an efficient approach to enhance both the photovoltaic(PV)and mechanical properties of the all-PSCs.However,length dependency of FCBS on certain all-PSC related properties has not been systematically explored.In this regard,we report a series of new non-conjugated P_(A)s by incorporating FCBS with various lengths(2,4,and 8 carbon atoms in thioalkyl segments).Unlike com-mon studies on so-called side-chain engineering,where longer side chains would lead to better solubility of those resulting polymers,in this work,we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length(i.e.,C2)in P_(A) named PYTS-C2.Its all-PSC achieves a high efficiency of 11.37%,and excellent mechanical robustness with a crack onset strain of 12.39%,significantly superior to those of the other P_(A)s.These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs,providing an effective strategy to fine-tune the structures of P_(A)s for highly efficient and mechanically robust PSCs.

Mechanical Properties of Weft-Knitted Spacer Fabrics Integrated with Silica Aerogels

The work investigated surface and mechanical properties of untreated and treated three-layered weftknitted spacer fabrics.In order to optimize the mechanical properties of weft-knitted spacer fabrics,silica aerogels(SAs)coating was employed.Scanning electron microscopy(SEM)images of untreated and treated spacer fabrics were analyzed to ensure the presence of SAs on the coated spacer fabrics.The basic properties of uncoated and coated weftknitted spacer fabrics were studied and compared.Tensile strength and initial modulus were studied according to the GB/T3923 test standard YG026 MB-250 by testing machine.Moreover,compression properties of spacer fabrics were also tested by HD026 G test instrument.In this testing,work of compression,the linearity of compression,recovery work of compression and other parameters were calculated from stress and strain curves.It was found that SAs coating has a significant influence on the mechanical properties of weftknitted spacer fabrics.The statistical analysis also verified the significant performance(P value smaller than 0.05)of treated fabric samples at the 0.05 level.