JSC "Krastsvetmet" has launched the production of glass melting units(GU) and glass feeders(GF),with the number of bushings being from 200 to 4000,made from platinum-rhodium alloys doped with oxide forming a...JSC "Krastsvetmet" has launched the production of glass melting units(GU) and glass feeders(GF),with the number of bushings being from 200 to 4000,made from platinum-rhodium alloys doped with oxide forming and reinforcing elements.The proprietary technology for dispersion-stabilized material of PtRh10DS composition having high strength and performance properties has been developed and applied.Combined products production was launched where bushings made of PtRh-20 alloy are welded to the plate of the dispersion-stabilized PtRh10DS material.The manufacture of seamless spinning assemblies has been organized.展开更多
The descriptions of fossil Triassic marine pla- codonts as durophagous reptiles are revised through comparisons with the sirenia and basal proboscidean mammal and palaeoenvironment analyses. The jaws of placodonts are...The descriptions of fossil Triassic marine pla- codonts as durophagous reptiles are revised through comparisons with the sirenia and basal proboscidean mammal and palaeoenvironment analyses. The jaws of placodonts are conver- gent with those of Halitherium/Dugong or Mo- eritherium in their general function. Whereas Halitherium possessed a horny oral pad and counterpart and a special rasp-like tongue to grind seagrass, as does the modern Dugong, placodonts had large teeth that covered their jaws to form a similar grinding pad. The sirenia also lost their anterior teeth during many Millions of years and built a horny pad instead and specialized tongue to fed mainly on seagrass, whereas placodonts had only macroalgae availa- ble. Indirect evidence for Triassic macroalgae is provided by benthic palaeocommunities from different layers and extended European regions in the Germanic Basin. Studies of tooth wear stages for Placodus indicate that anterior teeth may have been used in a similar manner to the procumbent front teeth of modern Dugong. Paraplacodus and Placodus seem to have used these teeth as spatulas to dig out seaplants. Cyamodus and other placodonts such as Placochelys had smaller or reduced anterior teeth. The scarcity of highly worn palatine or maxillary and lower jaw dentary Placodus or Cyamodus teeth (less then 0.5%) suggests that they had a relatively soft diet. The seaplants would only have been squeezed in a similar feeding strategy to that of modern Dugong feeding on seagrass without jaw rotation and grinding. The phylogenetic trend in tooth reduction within the placodonts Paraplacodus, Placodus, especially in Cyamodus but also Placochelys, and Henodus within 11 My appears to have been a result of this plant-feeding adaptation and may even explain the origin or at least close relationship of the earliest Upper Triassic turtles as toothless algae and jellyfish feeders, in terms of the long-term convergent development with the sirens.展开更多
In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the ...In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.展开更多
Secondary metabolites and synthetic iminosugars that structurally resemble monosaccharides are potent inhibitors of a-glucosidase activity. The enzyme is core in cleaving sucrose in phloem feeding insects and it also ...Secondary metabolites and synthetic iminosugars that structurally resemble monosaccharides are potent inhibitors of a-glucosidase activity. The enzyme is core in cleaving sucrose in phloem feeding insects and it also plays a crucial role of reducing osmotic stress via the formation of oligosaccharides. Inhibition of hydrolysis by iminosug- ars should result in nutritional deficiencies and/or disruption of normal osmoregulation. Deoxynojirimycin (DNJ) and 2 N-alkylated analogs [N-butyl DNJ (NB-DNJ) and N-nonyl DNJ (NN-DNJ)] were the major iminosugars used throughout the study. The extensive experiments conducted with a-glucosidase of the whitefly Bemisia tabaci indicated the competitive nature of inhibition and that the hydrophilic DNJ is a potent inhibitor in com- parison to the more hydrophobic NB-DNJ and NN-DNJ compounds. The same inhibitory pattern was observed with the psyllid Cacopsylla bidens a-glucosidase. In contrast to the above pattern, enzymes of the aphids, Myzus persicae and Aphis gossypii were more sen- sitive to the hydrophobic iminosugars as compared to DNJ. In vivo experiments in which adult B. tabaci were fed dietary iminosugars, show that the hydrophilic DNJ was far less toxic than the lipophilic NB-DNJ and NN-DNJ. It is proposed that this pattern is attributed to the better accessibility of the hydrophobic NN-DNJ to the a-glucosidase membrane- bound compartment in the midgut. Based on the inhibitory effects of certain polyhydroxy N-alkylated iminosugars, a-glucosidase of phloem feeding hemipterans could serve as an attractive target site for developing novel pest control agents.展开更多
Background: Eurasian Sparrowhawks(Accipiter nisus) increasingly represent successful city-dwellers. Thereby, a rich food supply indicated by high numbers of small birds is believed to be the key driver for this bird-e...Background: Eurasian Sparrowhawks(Accipiter nisus) increasingly represent successful city-dwellers. Thereby, a rich food supply indicated by high numbers of small birds is believed to be the key driver for this bird-eating raptor species to settle in urban environments. However, as small passerine birds show particularly strong antipredator responses, sparrowhawks may not simply focus on patches of highest prey densities, but rather respond strategically to prey behavior, raising the importance of other parameters in determining the occurrence within urban landscapes.Methods: To deepen our knowledge on habitat requirements of urban sparrowhawks, bird surveys were carried out during winter between December 2005 and January 2017 in 36 city parks in Vienna, Austria. Besides food supply also park size, canopy heterogeneity and the connectivity with other green spaces were considered.Results: Occurrence of sparrowhawks was positively affected by increasing park size, prey density and the interaction between both. Bird feeder density and park connectivity with other green spaces were of minor importance in explaining the presence of this species. Canopy heterogeneity didn't affect city park occupancy by Eurasian Sparrowhawks.Conclusions: Our results suggest that large city parks, particularly when characterized by high prey densities, substantially contribute to protect and preserve ecologically important bird species such as raptors within the urban environment—a landscape already struggling with biodiversity losses and functional homogenization.展开更多
Fault location for distribution feeders short circuit especially single-phase grounding fault is an important task in distribution system with non-effectively grounded neutral.Fault location mode for distribution feed...Fault location for distribution feeders short circuit especially single-phase grounding fault is an important task in distribution system with non-effectively grounded neutral.Fault location mode for distribution feeders using fault generated current and voltage transient traveling waves was investigated.The characteristics of transient traveling waves resulted from each short circuit fault and their transmission disciplinarian in distribution feeders are analyzed.This paper proposed that double end travelling waves theory which measures arriving time of fault initiated surge at both ends of the monitored line is fit for distribution feeders but single end traveling waves theory not.According to different distribution feeders,on the basis of analyzing original traveling waves reflection rule in line terminal, Current-voltage mode,voltage-voltage mode and current-current mode for fault location based on traveling waves are proposed and aerial mode component of original traveling waves is used to realize fault location.Experimental test verify the feasibility and correctness of the proposed method.展开更多
An on-line tap-changing circuit was developed for use with low voltage transformers (10 kV/380 V, or equivalent), in which the tap positions could be set independently for each low voltage feeder. This allows for poss...An on-line tap-changing circuit was developed for use with low voltage transformers (10 kV/380 V, or equivalent), in which the tap positions could be set independently for each low voltage feeder. This allows for possible variation in loads and distributed generation between different feeders fed from a given transformer, allowing the line voltages to be kept within limits on all feeders. A combination of computer simulation and practical experiments was used. A model constructed in Excel gave preliminary results, which was used to specify a more detailed model in Matlab? Simulink. A small-scale 220/380 V distribution network was constructed, with currents limited to 5 A per phase. Finally, a rotary switch was constructed, suitable for currents up to 500 A, which would be required for a full-scale low voltage distribution network. The results showed that the voltage could be kept within limits, even with a large difference in load and distributed generation from one feeder to another.展开更多
An extensive suite of igneous sills was intruded into the Tertiary sedimentary section of the Jiaojiang sag, East China Sea. This suite has been well imaged offshore through 2D and 3D seismic surveys, showing a close ...An extensive suite of igneous sills was intruded into the Tertiary sedimentary section of the Jiaojiang sag, East China Sea. This suite has been well imaged offshore through 2D and 3D seismic surveys, showing a close relationship with CO2 content in nearby gas discoveries. A new observational model, which incorporates simple upward propagation, simple horizontal propagation, and transgressive propagation, was proposed to interpret these sill intrusions. In this model, the source magma of the saucer-shaped sills was injected from their lowest points near the center. The transgressive propagation can be interpreted as a combination of the vertical and horizontal propagation. Most shallow sub-volcanic intrusions in the Jiaojiang sag exhibit fingered characteristics, both vertically and horizontally. The vertical fingered propagation produced saucer-shaped sills arranged in the flower style. Along the brims of lower sills could usually be found the upper sills, which are interpreted to have formed simultaneously with or later than the lower feeder sills. In the second type, the chilled paths of the older sills were reutilized by subsequent intrusions. The horizontal fingered propagation formed sheet intrusions that exhibit groove, lobate, tubular, and crevasse splay- like geometry in plan view. In 3D view, the sheet intrusions have still preserved the lower center and higher rim that similar with the sub-rounded saucer-shaped sills. Although fracture propagation may be important, flow inflation was the key mechanism of magma intrusion. Further consideration of the mechanisms underlying sill formation may help explain the fingered characteristics of sill propagation.展开更多
To develop a robot system for minimally invasive surgery is significant,however the existing minimally invasive surgery robots are not applicable in practical operations,due to their limited functioning and weaker per...To develop a robot system for minimally invasive surgery is significant,however the existing minimally invasive surgery robots are not applicable in practical operations,due to their limited functioning and weaker perception.A novel wire feeder is proposed for minimally invasive vascular interventional surgery.It is used for assisting surgeons in delivering a guide wire,balloon and stenting into a specific lesion location.By contrasting those existing wire feeders,the motion methods for delivering and rotating the guide wire in blood vessel are described,and their mechanical realization is presented.A new resistant force detecting method is given in details.The change of the resistance force can help the operator feel the block or embolism existing in front of the guide wire.The driving torque for rotating the guide wire is developed at different positions.Using the CT reconstruction image and extracted vessel paths,the path equation of the blood vessel is obtained.Combining the shapes of the guide wire outside the blood vessel,the whole bending equation of the guide wire is obtained.That is a risk criterion in the delivering process.This process can make operations safer and man-machine interaction more reliable.A novel surgery robot for feeding guide wire is designed,and a risk criterion for the system is given.展开更多
International thermonuclear experimental reactor (ITER) edge localized mode (ELM) coils are used to mitigate or suppress ELMs. The location of the coils in the vacuum vessel and behind the blankets exposes them to...International thermonuclear experimental reactor (ITER) edge localized mode (ELM) coils are used to mitigate or suppress ELMs. The location of the coils in the vacuum vessel and behind the blankets exposes them to high radiation levels and high temperatures. The feeders provide the power and cooling water for ELM coils. They are located in the chinmey ports and experience lower radiation and temperature levels. These coils and feeders work in a high magnetic field environment and are subjected to alternating electromagnetic force due to the interaction between high magnetic field and alternating current (AC) current in the coils. They are also subjected to thermal stresses due to thermal expansion. Using the ITER upper ELM coil and feeder as an example, mechanical analyses are performed to verify and optimize the updated design to enhance their structural performance. The results show that the conductor, jacket and bracket can meet the static, fatigue and crack threshold criteria. The optimization indicates that adding chamfers to the bracket can reduce the high stress of the bracket, and removing two rails can reduce the peak reaction force on the two rails arising from thermal expansion.展开更多
To satisfy the demand for good quality underwater welding and maintenance of nuclear power stations,a set of local dry automatic welding systems has been developed.These systems were based on an underwater robot that ...To satisfy the demand for good quality underwater welding and maintenance of nuclear power stations,a set of local dry automatic welding systems has been developed.These systems were based on an underwater robot that consisted of a special high-power underwater welding power supply,diving wire feeder,mini drain cap,welding robot,and special underwater welding torch.With a digital signal controller microprocessor as its core and combined with a dual inverter topology,the welding power supply was characterized by full-digital construction and multi-waveform flexible output.A compact diving wire feeding device was designed,based on the armature voltage negative feedback and high-frequency chopping pulse width modulation.This device yielded a high-efficiency seal of the driving motor with the help of dynamic and static sealing technology.To overcome the difficulty of local protection and deslagging in the welding area,a mini drain cap(with a duplexgas structure)based on the principle of the convergent nozzle was designed.The practical tests and the underwater welding experiments revealed that the underwater robotic local dry welding system is quite feasible.That is,the system could strike the arc stably and reliably in the shallow water environment,and formed beautiful welding seams.展开更多
Two common problems for a typical Power distribution system are voltage collapse & instability. Challenge is to identify the vulnerable nodes and apply the effective corrective actions. This paper presents a proba...Two common problems for a typical Power distribution system are voltage collapse & instability. Challenge is to identify the vulnerable nodes and apply the effective corrective actions. This paper presents a probabilistic fuzzy approach to assess the node status and proposes feeder reconfiguration as a method to address the same. Feeder reconfiguration is altering the topological structures of distribution feeders by changing the open/closed states of the sectionalizing and ties switches. The solution is converge using a probabilistic fuzzy modeled solution, which defines the nodal vulnerability index (VI) as a function of node voltage and node voltage stability index and predicts nodes critical to voltage collapse. The information is further used to plan best combination of feeders from each loop in distribution system to be switched out such that the resulting configuration gives the optimal performance i.e. best voltage profile and minimal kW losses. The proposed method is tested on established radial distribution system and results are presented.展开更多
Perth’s new 72 km long Southern Rail System opened in 2007. With a maximum speed of 137 km/hr and an average speed of almost 90 km/hr this system acts more like a new high speed rail than a suburban rail system, whic...Perth’s new 72 km long Southern Rail System opened in 2007. With a maximum speed of 137 km/hr and an average speed of almost 90 km/hr this system acts more like a new high speed rail than a suburban rail system, which in Australia typically averages around 40 km/hr for an all-stops services. The Southern Rail Line was very controversial when being planned as the urban areas served are not at all typical of those normally provided with rail but instead were highly car dependent and scattered low density land uses. Nevertheless it has been remarkably successful, carrying over 70,000 people per day (five times the patronage on the express buses it replaced) and has reached the patronage levels predicted for 2021 a decade ahead of time. The reasons for this success are analyzed and include well-designed interchanges, careful integration of bus services, the use of integrated ticketing and fares without transfer penalties and, crucially the high speed of the system when compared to competing car based trips. The Southern Rail Line in effect explodes the current paradigm of transfer penalties, exposing this as a myth. The lessons for transport planning in low density cities are significant, and are explored further in the paper.展开更多
AIM: To explore the possibility of human umbilical cord mesenchymal stem cells(h UCMSCs), human umbilical vein endothelial cells(h UVECs), human dental pulp stem cells(h DPSCs) and human periodontal ligament st...AIM: To explore the possibility of human umbilical cord mesenchymal stem cells(h UCMSCs), human umbilical vein endothelial cells(h UVECs), human dental pulp stem cells(h DPSCs) and human periodontal ligament stem cells(h PDLSCs) serving as feeder cells in co-culture systems for the cultivation of limbal stem cells.METHODS: Different feeder layers were cultured in Dulbecco's modified Eagle's medium(DMEM)/F12 and were treated with mitomycin C. Rabbits limbal stem cells(LSCs) were co-cultured on h UCMSCs, h UVECs, h DPSCs, h PDLSCs and NIH-3T3, and then comparative analysis were made between each group to see their respective colony-forming efficiency(CFE) assay and immunofluorescence(IPO13,CK3/12).RESULTS: The efficiency of the four type cells in supporting the LSCs morphology and its cellular differentiation was similar to that of NIH-3T3 fibroblasts as demonstrated by the immunostaining properties analysis, with each group exhibiting a similar strong expression pattern of IPO13, but lacking CK3 and CK12 expression in terms of immunostaining. But h UCMSCs, h DPSCs and h PDLSCs feeder layers were superior in promoting colony formation potential of cells when compared to h UVECs and feedercell-free culture.CONCLUSION: hUCMSCs, hDPSCs and hPDLSCs can be a suitable alternative to conventional mouse NIH-3T3 feeder cells, so that risk of zoonotic infection can be diminished.展开更多
The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogen...The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogeneity of drying and heating, and is the main factor responsible for pressure loss in short conveying systems. However, there is a lack of information concerning the axial and radial distributions of coarse particles in this type of configuration, despite the recent advances when dealing with fine particles (FCC catalyst). The present work therefore investigates a vertical venturi feeder with the conveying system operating in dilute-phase regime with 1 mm spherical glass particles. Experimental assays revealed the behavior of the mass flow rate of solids in the system, and pressure measurements were made along the riser in order to evaluate the accuracy of simulations. Euler-Euler simulations provided close estimation of the experimental pressure drop and the pressure drop according to distance in the linear region. Simulation of the fluid dynamics in the riser showed that solids clusters were formed at low concentrations near the feeding device, reflecting heterogeneity in the solid phase volume fraction.展开更多
In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodyna...In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.展开更多
文摘JSC "Krastsvetmet" has launched the production of glass melting units(GU) and glass feeders(GF),with the number of bushings being from 200 to 4000,made from platinum-rhodium alloys doped with oxide forming and reinforcing elements.The proprietary technology for dispersion-stabilized material of PtRh10DS composition having high strength and performance properties has been developed and applied.Combined products production was launched where bushings made of PtRh-20 alloy are welded to the plate of the dispersion-stabilized PtRh10DS material.The manufacture of seamless spinning assemblies has been organized.
文摘The descriptions of fossil Triassic marine pla- codonts as durophagous reptiles are revised through comparisons with the sirenia and basal proboscidean mammal and palaeoenvironment analyses. The jaws of placodonts are conver- gent with those of Halitherium/Dugong or Mo- eritherium in their general function. Whereas Halitherium possessed a horny oral pad and counterpart and a special rasp-like tongue to grind seagrass, as does the modern Dugong, placodonts had large teeth that covered their jaws to form a similar grinding pad. The sirenia also lost their anterior teeth during many Millions of years and built a horny pad instead and specialized tongue to fed mainly on seagrass, whereas placodonts had only macroalgae availa- ble. Indirect evidence for Triassic macroalgae is provided by benthic palaeocommunities from different layers and extended European regions in the Germanic Basin. Studies of tooth wear stages for Placodus indicate that anterior teeth may have been used in a similar manner to the procumbent front teeth of modern Dugong. Paraplacodus and Placodus seem to have used these teeth as spatulas to dig out seaplants. Cyamodus and other placodonts such as Placochelys had smaller or reduced anterior teeth. The scarcity of highly worn palatine or maxillary and lower jaw dentary Placodus or Cyamodus teeth (less then 0.5%) suggests that they had a relatively soft diet. The seaplants would only have been squeezed in a similar feeding strategy to that of modern Dugong feeding on seagrass without jaw rotation and grinding. The phylogenetic trend in tooth reduction within the placodonts Paraplacodus, Placodus, especially in Cyamodus but also Placochelys, and Henodus within 11 My appears to have been a result of this plant-feeding adaptation and may even explain the origin or at least close relationship of the earliest Upper Triassic turtles as toothless algae and jellyfish feeders, in terms of the long-term convergent development with the sirens.
文摘In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.
文摘Secondary metabolites and synthetic iminosugars that structurally resemble monosaccharides are potent inhibitors of a-glucosidase activity. The enzyme is core in cleaving sucrose in phloem feeding insects and it also plays a crucial role of reducing osmotic stress via the formation of oligosaccharides. Inhibition of hydrolysis by iminosug- ars should result in nutritional deficiencies and/or disruption of normal osmoregulation. Deoxynojirimycin (DNJ) and 2 N-alkylated analogs [N-butyl DNJ (NB-DNJ) and N-nonyl DNJ (NN-DNJ)] were the major iminosugars used throughout the study. The extensive experiments conducted with a-glucosidase of the whitefly Bemisia tabaci indicated the competitive nature of inhibition and that the hydrophilic DNJ is a potent inhibitor in com- parison to the more hydrophobic NB-DNJ and NN-DNJ compounds. The same inhibitory pattern was observed with the psyllid Cacopsylla bidens a-glucosidase. In contrast to the above pattern, enzymes of the aphids, Myzus persicae and Aphis gossypii were more sen- sitive to the hydrophobic iminosugars as compared to DNJ. In vivo experiments in which adult B. tabaci were fed dietary iminosugars, show that the hydrophilic DNJ was far less toxic than the lipophilic NB-DNJ and NN-DNJ. It is proposed that this pattern is attributed to the better accessibility of the hydrophobic NN-DNJ to the a-glucosidase membrane- bound compartment in the midgut. Based on the inhibitory effects of certain polyhydroxy N-alkylated iminosugars, a-glucosidase of phloem feeding hemipterans could serve as an attractive target site for developing novel pest control agents.
文摘Background: Eurasian Sparrowhawks(Accipiter nisus) increasingly represent successful city-dwellers. Thereby, a rich food supply indicated by high numbers of small birds is believed to be the key driver for this bird-eating raptor species to settle in urban environments. However, as small passerine birds show particularly strong antipredator responses, sparrowhawks may not simply focus on patches of highest prey densities, but rather respond strategically to prey behavior, raising the importance of other parameters in determining the occurrence within urban landscapes.Methods: To deepen our knowledge on habitat requirements of urban sparrowhawks, bird surveys were carried out during winter between December 2005 and January 2017 in 36 city parks in Vienna, Austria. Besides food supply also park size, canopy heterogeneity and the connectivity with other green spaces were considered.Results: Occurrence of sparrowhawks was positively affected by increasing park size, prey density and the interaction between both. Bird feeder density and park connectivity with other green spaces were of minor importance in explaining the presence of this species. Canopy heterogeneity didn't affect city park occupancy by Eurasian Sparrowhawks.Conclusions: Our results suggest that large city parks, particularly when characterized by high prey densities, substantially contribute to protect and preserve ecologically important bird species such as raptors within the urban environment—a landscape already struggling with biodiversity losses and functional homogenization.
基金supported by Natural Science Foundation of Shandong Province(ZR2009FM054)
文摘Fault location for distribution feeders short circuit especially single-phase grounding fault is an important task in distribution system with non-effectively grounded neutral.Fault location mode for distribution feeders using fault generated current and voltage transient traveling waves was investigated.The characteristics of transient traveling waves resulted from each short circuit fault and their transmission disciplinarian in distribution feeders are analyzed.This paper proposed that double end travelling waves theory which measures arriving time of fault initiated surge at both ends of the monitored line is fit for distribution feeders but single end traveling waves theory not.According to different distribution feeders,on the basis of analyzing original traveling waves reflection rule in line terminal, Current-voltage mode,voltage-voltage mode and current-current mode for fault location based on traveling waves are proposed and aerial mode component of original traveling waves is used to realize fault location.Experimental test verify the feasibility and correctness of the proposed method.
文摘An on-line tap-changing circuit was developed for use with low voltage transformers (10 kV/380 V, or equivalent), in which the tap positions could be set independently for each low voltage feeder. This allows for possible variation in loads and distributed generation between different feeders fed from a given transformer, allowing the line voltages to be kept within limits on all feeders. A combination of computer simulation and practical experiments was used. A model constructed in Excel gave preliminary results, which was used to specify a more detailed model in Matlab? Simulink. A small-scale 220/380 V distribution network was constructed, with currents limited to 5 A per phase. Finally, a rotary switch was constructed, suitable for currents up to 500 A, which would be required for a full-scale low voltage distribution network. The results showed that the voltage could be kept within limits, even with a large difference in load and distributed generation from one feeder to another.
基金supported by National Basic Research Program of China (973) under grant No.2009CB219400
文摘An extensive suite of igneous sills was intruded into the Tertiary sedimentary section of the Jiaojiang sag, East China Sea. This suite has been well imaged offshore through 2D and 3D seismic surveys, showing a close relationship with CO2 content in nearby gas discoveries. A new observational model, which incorporates simple upward propagation, simple horizontal propagation, and transgressive propagation, was proposed to interpret these sill intrusions. In this model, the source magma of the saucer-shaped sills was injected from their lowest points near the center. The transgressive propagation can be interpreted as a combination of the vertical and horizontal propagation. Most shallow sub-volcanic intrusions in the Jiaojiang sag exhibit fingered characteristics, both vertically and horizontally. The vertical fingered propagation produced saucer-shaped sills arranged in the flower style. Along the brims of lower sills could usually be found the upper sills, which are interpreted to have formed simultaneously with or later than the lower feeder sills. In the second type, the chilled paths of the older sills were reutilized by subsequent intrusions. The horizontal fingered propagation formed sheet intrusions that exhibit groove, lobate, tubular, and crevasse splay- like geometry in plan view. In 3D view, the sheet intrusions have still preserved the lower center and higher rim that similar with the sub-rounded saucer-shaped sills. Although fracture propagation may be important, flow inflation was the key mechanism of magma intrusion. Further consideration of the mechanisms underlying sill formation may help explain the fingered characteristics of sill propagation.
基金Supported by National Hi-tech Research and Development Program of China(863 Program,Grant No.2010AA044001)Hebei Provincial Natural Science Foundation of China(Grant No.E2015203405)
文摘To develop a robot system for minimally invasive surgery is significant,however the existing minimally invasive surgery robots are not applicable in practical operations,due to their limited functioning and weaker perception.A novel wire feeder is proposed for minimally invasive vascular interventional surgery.It is used for assisting surgeons in delivering a guide wire,balloon and stenting into a specific lesion location.By contrasting those existing wire feeders,the motion methods for delivering and rotating the guide wire in blood vessel are described,and their mechanical realization is presented.A new resistant force detecting method is given in details.The change of the resistance force can help the operator feel the block or embolism existing in front of the guide wire.The driving torque for rotating the guide wire is developed at different positions.Using the CT reconstruction image and extracted vessel paths,the path equation of the blood vessel is obtained.Combining the shapes of the guide wire outside the blood vessel,the whole bending equation of the guide wire is obtained.That is a risk criterion in the delivering process.This process can make operations safer and man-machine interaction more reliable.A novel surgery robot for feeding guide wire is designed,and a risk criterion for the system is given.
文摘International thermonuclear experimental reactor (ITER) edge localized mode (ELM) coils are used to mitigate or suppress ELMs. The location of the coils in the vacuum vessel and behind the blankets exposes them to high radiation levels and high temperatures. The feeders provide the power and cooling water for ELM coils. They are located in the chinmey ports and experience lower radiation and temperature levels. These coils and feeders work in a high magnetic field environment and are subjected to alternating electromagnetic force due to the interaction between high magnetic field and alternating current (AC) current in the coils. They are also subjected to thermal stresses due to thermal expansion. Using the ITER upper ELM coil and feeder as an example, mechanical analyses are performed to verify and optimize the updated design to enhance their structural performance. The results show that the conductor, jacket and bracket can meet the static, fatigue and crack threshold criteria. The optimization indicates that adding chamfers to the bracket can reduce the high stress of the bracket, and removing two rails can reduce the peak reaction force on the two rails arising from thermal expansion.
基金This work was supported by the National Natural Science Foundation of China(Grant Numbers 51375173).
文摘To satisfy the demand for good quality underwater welding and maintenance of nuclear power stations,a set of local dry automatic welding systems has been developed.These systems were based on an underwater robot that consisted of a special high-power underwater welding power supply,diving wire feeder,mini drain cap,welding robot,and special underwater welding torch.With a digital signal controller microprocessor as its core and combined with a dual inverter topology,the welding power supply was characterized by full-digital construction and multi-waveform flexible output.A compact diving wire feeding device was designed,based on the armature voltage negative feedback and high-frequency chopping pulse width modulation.This device yielded a high-efficiency seal of the driving motor with the help of dynamic and static sealing technology.To overcome the difficulty of local protection and deslagging in the welding area,a mini drain cap(with a duplexgas structure)based on the principle of the convergent nozzle was designed.The practical tests and the underwater welding experiments revealed that the underwater robotic local dry welding system is quite feasible.That is,the system could strike the arc stably and reliably in the shallow water environment,and formed beautiful welding seams.
文摘Two common problems for a typical Power distribution system are voltage collapse & instability. Challenge is to identify the vulnerable nodes and apply the effective corrective actions. This paper presents a probabilistic fuzzy approach to assess the node status and proposes feeder reconfiguration as a method to address the same. Feeder reconfiguration is altering the topological structures of distribution feeders by changing the open/closed states of the sectionalizing and ties switches. The solution is converge using a probabilistic fuzzy modeled solution, which defines the nodal vulnerability index (VI) as a function of node voltage and node voltage stability index and predicts nodes critical to voltage collapse. The information is further used to plan best combination of feeders from each loop in distribution system to be switched out such that the resulting configuration gives the optimal performance i.e. best voltage profile and minimal kW losses. The proposed method is tested on established radial distribution system and results are presented.
文摘Perth’s new 72 km long Southern Rail System opened in 2007. With a maximum speed of 137 km/hr and an average speed of almost 90 km/hr this system acts more like a new high speed rail than a suburban rail system, which in Australia typically averages around 40 km/hr for an all-stops services. The Southern Rail Line was very controversial when being planned as the urban areas served are not at all typical of those normally provided with rail but instead were highly car dependent and scattered low density land uses. Nevertheless it has been remarkably successful, carrying over 70,000 people per day (five times the patronage on the express buses it replaced) and has reached the patronage levels predicted for 2021 a decade ahead of time. The reasons for this success are analyzed and include well-designed interchanges, careful integration of bus services, the use of integrated ticketing and fares without transfer penalties and, crucially the high speed of the system when compared to competing car based trips. The Southern Rail Line in effect explodes the current paradigm of transfer penalties, exposing this as a myth. The lessons for transport planning in low density cities are significant, and are explored further in the paper.
基金Supported by the Project Plan of Science and Technology Assistance in Xinjiang Autonomous Region(No.201491171)
文摘AIM: To explore the possibility of human umbilical cord mesenchymal stem cells(h UCMSCs), human umbilical vein endothelial cells(h UVECs), human dental pulp stem cells(h DPSCs) and human periodontal ligament stem cells(h PDLSCs) serving as feeder cells in co-culture systems for the cultivation of limbal stem cells.METHODS: Different feeder layers were cultured in Dulbecco's modified Eagle's medium(DMEM)/F12 and were treated with mitomycin C. Rabbits limbal stem cells(LSCs) were co-cultured on h UCMSCs, h UVECs, h DPSCs, h PDLSCs and NIH-3T3, and then comparative analysis were made between each group to see their respective colony-forming efficiency(CFE) assay and immunofluorescence(IPO13,CK3/12).RESULTS: The efficiency of the four type cells in supporting the LSCs morphology and its cellular differentiation was similar to that of NIH-3T3 fibroblasts as demonstrated by the immunostaining properties analysis, with each group exhibiting a similar strong expression pattern of IPO13, but lacking CK3 and CK12 expression in terms of immunostaining. But h UCMSCs, h DPSCs and h PDLSCs feeder layers were superior in promoting colony formation potential of cells when compared to h UVECs and feedercell-free culture.CONCLUSION: hUCMSCs, hDPSCs and hPDLSCs can be a suitable alternative to conventional mouse NIH-3T3 feeder cells, so that risk of zoonotic infection can be diminished.
文摘The feeding of coarse particles (>0.5 mm diameter) directly into a riser operating at positive pressure is important for drying and pre-heating applications. The presence of the feeding device can lead to heterogeneity of drying and heating, and is the main factor responsible for pressure loss in short conveying systems. However, there is a lack of information concerning the axial and radial distributions of coarse particles in this type of configuration, despite the recent advances when dealing with fine particles (FCC catalyst). The present work therefore investigates a vertical venturi feeder with the conveying system operating in dilute-phase regime with 1 mm spherical glass particles. Experimental assays revealed the behavior of the mass flow rate of solids in the system, and pressure measurements were made along the riser in order to evaluate the accuracy of simulations. Euler-Euler simulations provided close estimation of the experimental pressure drop and the pressure drop according to distance in the linear region. Simulation of the fluid dynamics in the riser showed that solids clusters were formed at low concentrations near the feeding device, reflecting heterogeneity in the solid phase volume fraction.
基金Kampachi Farms LLC for their support to complete this work and for all the technical information provided to complete the numerical model
文摘In the present study, the dynamic response of a coupled SPM-feeder-cage system under irregular waves and shear currents is analyzed. A numerical model is developed by using the commercial software Orca Flex. Hydrodynamics coefficients of the vessel are calculated by using a 3D diffraction/radiation panel program. First- and second-order wave forces are included in the calculations. Morison equation is used to compute the drag force on line elements representing the net. Drag coefficients are determined at every time step in the simulation considering the relative normal velocity between the structural elements and the fluid flow. The dynamic response of the coupled system is analyzed for various environments and net materials. The results of the study show the effects of solidity ratio of the net and vertical positions of the cage on the overall dynamic response of the system, confirming the viability of this type of configuration for future development of offshore aquaculture in deep waters.