Matrix pencil based robust control for feedforward systems with event-triggered communications and sensor/actuator faults

In this paper we address the issue of output-feedback robust control for a class of feedforward nonlinear systems.Essentially different from the related literature,the feedback/input signals are corrupted by additive noises and can only be transmitted intermittently due to the consideration of event-triggered communications,which bring new challenges to the control design.With the aid of matrix pencil based design procedures,regulating the output to near zero is globally solved by a non-conservative dynamic low-gain controller which requires only an a priori information on the upper-bound of the growth rate of nonlinearities.Theoretical analysis shows that the closed-loop system is input-to-state stable with respect to the sampled errors and additive noise.In particular,the observer and controller designs have a dual architecture with a single dynamic scaling parameter whose update law can be obtained by calculating the generalized eigenvalues of matrix pencils offline,which has an advantage in the sense of improving the system convergence rate.

Research on Anti-Fluctuation Control of Winding Tension System Based on Feedforward Compensation

In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.

Improving the spaceborne GNSS-R altimetric precision based on the novel multilayer feedforward neural network weighted joint prediction model

Global navigation satellite system-reflection(GNSS-R)sea surface altimetry based on satellite constellation platforms has become a new research direction and inevitable trend,which can meet the altimetric precision at the global scale required for underwater navigation.At present,there are still research gaps for GNSS-R altimetry under this mode,and its altimetric capability cannot be specifically assessed.Therefore,GNSS-R satellite constellations that meet the global altimetry needs to be designed.Meanwhile,the matching precision prediction model needs to be established to quantitatively predict the GNSS-R constellation altimetric capability.Firstly,the GNSS-R constellations altimetric precision under different configuration parameters is calculated,and the mechanism of the influence of orbital altitude,orbital inclination,number of satellites and simulation period on the precision is analyzed,and a new multilayer feedforward neural network weighted joint prediction model is established.Secondly,the fit of the prediction model is verified and the performance capability of the model is tested by calculating the R2 value of the model as 0.9972 and the root mean square error(RMSE)as 0.0022,which indicates that the prediction capability of the model is excellent.Finally,using the novel multilayer feedforward neural network weighted joint prediction model,and considering the research results and realistic costs,it is proposed that when the constellation is set to an orbital altitude of 500 km,orbital inclination of 75and the number of satellites is 6,the altimetry precision can reach 0.0732 m within one year simulation period,which can meet the requirements of underwater navigation precision,and thus can provide a reference basis for subsequent research on spaceborne GNSS-R sea surface altimetry.

Exploring the effect of fingertip aero-haptic feedforward cues in directing eyes-free target acquisition in VR

Background The sense of touch plays a crucial role in interactive behavior within virtual spaces,particularly when visual attention is absent.Although haptic feedback has been widely used to compensate for the lack of visual cues,the use of tactile information as a predictive feedforward cue to guide hand movements remains unexplored and lacks theoretical understanding.Methods This study introduces a fingertip aero-haptic rendering method to investigate its effectiveness in directing hand movements during eyes-free spatial interactions.The wearable device incorporates a multichannel micro-airflow chamber to deliver adjustable tactile effects on the fingertips.Results The first study verified that tactile directional feedforward cues significantly improve user capabilities in eyes-free target acquisition and that users rely heavily on haptic indications rather than spatial memory to control their hands.A subsequent study examined the impact of enriched tactile feedforward cues on assisting users in determining precise target positions during eyes-free interactions,and assessed the required learning efforts.Conclusions The haptic feedforward effect holds great practical promise in eyeless design for virtual reality.We aim to integrate cognitive models and tactile feedforward cues in the future,and apply richer tactile feedforward information to alleviate users'perceptual deficiencies.

Laboratory Implementation of Direct Torque Controller based Speed Loop Pseudo Derivative Feedforward Controller for PMSM Drive

This paper,evaluate the effectiveness of a proposed speed loop pseudo derivative feedforward(PDFF)controller-based direct torque controller(DTC)for a PMSM drive against the performance of existing PI speed controller-based DTC and hysteresis current controller(HCC).The proposed PDFF-based speed regulator effectively reduces oscillation and overshoot associated with rotor angular speed,electromagnetic torque,and stator current.Two case studies,one using forward-to-reverse motoring operation and the other involving reverse-to-forward braking operation,has been validated to show the effectiveness of the proposed control strategy.The proposed controller's superior performance is demonstrated through experimental verification utilizing an FPGA controller for a 1.5 kW PMSM drive laboratory prototype.

Application Effect of Feedforward Control in Outpatient Blood Specimen Management

Objective:To analyze the application effect of feedforward control in outpatient blood specimen management.Methods:1,200 patients who had their venous blood collected in outpatient phlebotomy room of our hospital's outpatient clinic from January 2021 to April 2021 were selected as study subjects and divided into 600 cases in the control group and 600 cases in the observation group.The two groups of patients were compared in terms of their satisfaction with the staff,the efficiency of the nurses and the quality of nursing care,turnaround time before specimen analysis,the rejection rate of the blood specimens,and the time of result reporting.Results:After the implementation of feedforward control,patients'satisfaction with staff,nurses work efficiency and quality of care,turnaround time before specimen analysis,specimen rejection rate,and result reporting time in the observation group were significantly higher than those in the control group(P<0.05).Conclusion:The application of feedforward control in the management of outpatient blood specimens has significant effect,which effectively improves patients'satisfaction,enhances the efficiency of nurses and the quality of nursing care,shortens the turnaround time of specimens before analysis and the reporting time of results,and reduces the rejection rate of specimens.

IDENTIFICATION OF NONLINEAR TIME VARYING SYSTEM USING FEEDFORWARD NEURAL NETWORKS

As it is well known,it is difficult to identify a nonlinear time varying system using traditional identification approaches,especially under unknown nonlinear function.Neural networks have recently emerged as a successful tool in the area of identification and control of time invariant nonlinear systems.However,it is still difficult to apply them to complicated time varying system identification.In this paper we present a learning algorithm for identification of the nonlinear time varying system using feedforward neural networks.The main idea of this approach is that we regard the weights of the network as a state of a time varying system,then use a Kalman filter to estimate the state.Thus the network implements nonlinear and time varying mapping.We derived both the global and local learning algorithms.Simulation results demonstrate the effectiveness of this approach.

Feedforward and Feedback Optimal Control for Linear Systems with Sinusoidal Disturbances

The linear systems affected by additive external sinusoidal disturbances is studied. The problem is to damp this forced oscillation in an optimal fashion. The main result of this paper is a new design approach is proposed of realizable feedforward and feedback optimal control law for a linear time invariant system with sinusoidal disturbances. The algorithm of solving the optimal control law is given. It is shown that the control law is easily realized and is robust with respect to errors produced by the external sinusoidal disturbances through simulation results.

Double Position Servo Synchronous Drive System Based on Cross-Coupling Integrated Feedforward Control for Broacher

Synchronization errors directly deteriorate the machining accuracy of metal parts and the existed method cannot keep high synchronization precision because of external disturbances. A new double position servo synchronous driving scheme based on semi-closed-loop cross- coupling integrated feedforward control is proposed. The scheme comprises a position error cross-coupling feedfor-ward control and a load torque identification with feed- forward control. A digital integrated simulation system for the dual servo synchronous drive system is established. Using a 20 t servo broacher, performance analysis of the scheme is conducted based on this simulation system and the simulation results show that systems with traditional parallel or single control have problems when the work- table works with an unbalanced load. However, the system with proposed scheme shows good synchronous perfor- mance and positional accuracy. Broaching tests are performed and the experimental results show that the maximum dual axis synchronization error of the system is only 8μm during acceleration and deceleration processes and the error between the actual running position and the given position is almost zero. A double position servo synchronous driving scheme is presented based on crosscoupled integrated feedforward compensation control, which can improve the synchronization precision.

Feedforward and feedback optimal control for linear time-varying systems with persistent disturbances

The optimal control problem for linear time-varying systems affected by external persistent disturbances with known dynamic characteristics but unknown initial conditions is consider and a design procedure of a feedforward and feedbaek optimal controller is presented. The condition of existence and uniqueness of the control law is given. The disturbanee observer is proposed to make the feedforward control law realizable physically. Simulation results demonstrate that the feedforward and feedbaek optimal control law is more effective and robust than the elassical state feedbaek control law with respect to external disturbanees.

Asymptotic stabilization of dynamically quantized nonlinear systems in feedforward form

This paper studies the stabilizability of an n-dimensional quantized feedforward nonlinear system. The state of that system is first quantized into a finite number of bits, and then sent through a digital network to the controller. We want to minimize the number of transmitted bits subject to maintaining asymptotic stability. In the prior literature, n bits are used to stabilize the n-dimensional system by assigning one bit to each state variable （dimension）. Under the stronger assumption of global Lipschitz continuity, this paper extends that result by stabilizing the system with a single bit. Its key contribution is a dynamic quantization policy which dynamically assigns the single bit to the most ＂important＂ state variable. Under this policy, the quantization error exponentially converges to 0 and the stability of the system can, therefore, be guaranteed. Because i is the minimum number of quantization bits （per sampling step）, the proposed dynamic quantization policy achieves the minimum stabilizable bit number for that n-dimensional feedforward nonlinear system.

A New Feedback-feedforward Configuration for the Iterative Learning Control of a Class of Discrete-time Systems

这份报纸为反复的学习控制(ILC ) 论述一种新反馈前馈控制配置与反馈设计，它由反馈和一个前馈控制部件组成。反馈积分控制器稳定系统，并且在操作，和前馈控制 ILC 期间起主导的作用补偿可重复的非线性 / 未知的变化时间的动力学和骚乱，从而提高性能独自由反馈控制完成了。作为这控制策略的最有利的点，没有作努力到前馈控制 / 反馈获得的 reconfigurate 或重新调律，前馈控制 ILC 和反馈控制能独立地或联合工作。与严密分析，建议学习控制计划沿着重复轴保证 asymptotic 得到集中。

Adaptive Stabilization for a Class of Feedforward Systems with Zero-Dynamics

This paper investigates adaptive state feedback stabilization for a class of feedforward nonlinear systems with zero-dynamics, unknown linear growth rate and control coefficient. For design convenience, the state transformation is first introduced and the new system is obtained. Then, the estimation law is constructed for the unknown control coefficient, and the state feedback controller is proposed with a gain updated on-line. By appropriate choice of the estimation law for the control coefficient and the dynamic gain, the states of the closed-loop system are globally bounded, and the state of the original system converges to zero. Finally, a simulation example is given to illustrate the correctness of the theoretical results.

Feedforward and feedback optimal control for linear time-varying systems with persistent disturbances

The optimal control problem was studied for linear time-varying systems,which was affected by external persistent disturbances with known dynamic characteristics but unknown initial conditions. To damp the effect of disturbances in an optimal fashion,we obtained a new feedforward and feedback optimal control law and gave the control algorithm by solving a Riccati differential equation and a matrix differential equation. Simulation results showed that the achieved optimal control law was realizable,efficient and robust to reject the external disturbances.

An Improved Time Feedforward Connections Recurrent Neural Networks

Recurrent Neural Networks(RNNs)have been widely applied to deal with temporal problems,such as flood forecasting and financial data processing.On the one hand,traditional RNNs models amplify the gradient issue due to the strict time serial dependency,making it difficult to realize a long-term memory function.On the other hand,RNNs cells are highly complex,which will signifi-cantly increase computational complexity and cause waste of computational resources during model training.In this paper,an improved Time Feedforward Connections Recurrent Neural Networks(TFC-RNNs)model was first proposed to address the gradient issue.A parallel branch was introduced for the hidden state at time t−2 to be directly transferred to time t without the nonlinear transforma-tion at time t−1.This is effective in improving the long-term dependence of RNNs.Then,a novel cell structure named Single Gate Recurrent Unit(SGRU)was presented.This cell structure can reduce the number of parameters for RNNs cell,consequently reducing the computational complexity.Next,applying SGRU to TFC-RNNs as a new TFC-SGRU model solves the above two difficulties.Finally,the performance of our proposed TFC-SGRU was verified through sev-eral experiments in terms of long-term memory and anti-interference capabilities.Experimental results demonstrated that our proposed TFC-SGRU model can cap-ture helpful information with time step 1500 and effectively filter out the noise.The TFC-SGRU model accuracy is better than the LSTM and GRU models regarding language processing ability.

基于直驱并联机构的六自由度振动校准系统研究

直驱并联机构六自由度振动校准系统可以实现高精度和多自由度的运动模拟和校准,具有良好的应用前景。为了解决平台驱动关节滑块位置跟踪精度低的问题,对该机构进行动力学力矩前馈补偿分析。利用虚功原理建立该机构动力学模型,提出一种基本伺服算法与动力学前馈补偿相结合的控制策略。在实验样机上进行力矩前馈补偿,实验结果表明,在开放伺服程序增加力矩前馈补偿后,可以降低该机构在运动时的跟随误差,进行不同幅值单自由度正弦运动时,跟随误差分别下降40.32%、39.04%、43.24%、48.19%。并对振动台进行了性能检测,在平台基础上,搭建激光测量系统和数据采集模块,进行传感器校准和性能分析,平台横向振动比较小,谐波失真度均小于2%,平台具有较好的稳定性和性能。

基于深度学习的可见光通信系统室内三维定位

针对目前室内可见光通信系统三维定位的准确率与定位速度依然不佳的问题,提出一种基于深度学习的可见光通信系统室内定位方法。首先,设计了一个神经网络将指纹数据编码成二维阵列,利用卷积神经网络学习指纹阵列与目标位置之间的关系;然后,通过粒子群优化算法自动搜索卷积神经网络的超参数,以降低深度神经网络的训练难度。此外,设计了定位数据训练集、验证集与测试集的划分方法,有助于缓解神经网络的过拟合问题,并提高定位准确性。仿真结果表明,所提方法在6×6×4m3室内环境下的平均定位误差为0.024m,平均定位时间为0.478s。

Self Adjusting Feedforward Compensation Tracking Control for Proportional Valve Controlled Motor

Aim Aiming at the position tracking control for valve controlled motor electrohydraulic proportional servo systems mainly driving the static load torque, the tracking performance was studied in the presence of the variable gain and deadzone. Methods On the basis of conventional composite control with the deadzone compensation method, a comprehensive control approach with the deadzone and self adjusting feedforward compensation was proposed. Results Experimental results showed that the good tracking performance was achieved for the sinusoidal and constant velocity position tracking under a wide variations of load torque. Conclusion The position tracking accuracy for valve controlled motor electrohydraulic proportional servo systems has been solved by using the comprehensive control approach with the deadzone and self adjusting feedforward compensation.