Dielectric properties and relaxor ferroelectric behavior of （1-y）Ba(Zr0.1Ti0.9)O3-yBa(Zn1/3Nb2/3)O3 ceramics

The microstructure,dielectric and ferroelectric properties of(1-y)Ba(Zr0.1Ti0.9)O3-yBa(Zn1/3Nb2/3)O3(y=0-0.05)ceramics prepared by traditional solid state method were investigated by X-ray diffractometer,scanning electron microscope,electric parameter testing system and ferroelectric tester.It is found that the barium zirconate titanate based ceramics are single-phase perovskites as y increases up to 0.05 and their average grain size decreases with the increase of y.The permittivity maximumεr,max is suppressed from 8948 to 1611 at 1 kHz with increasing y,and the ferroelectric-paraelectric phase transition temperature Tm decreases from 93 to-89℃at 1 kHz as y increases.The composition-induced diffuse phase transition is enhanced with increasingy.The relaxor-like ferroelectric behavior with a strong frequency dispersion of Tm and permittivity at T<Tm accompanied by a strong diffuse phase transition is found for the system with high y value.The remnant polarization decreases with increasing y,while the coercive field decreases remarkably and then increases with the increase of y.

Monte Carlo simulation on dielectric relaxation and dipole cluster state in relaxor ferroelectrics

The Ginzburg-Landau theory on ferroelectrics with random field induced by dipole defects is studied by using Monte Carlo simulation, in order to investigate the dipole configuration and the dielectric relaxation of relaxor ferro-electrics. With the increase of random field, the dipole configuration evolves from the long-range ferroelectric order into the coexistence of short-range dipole-clusters and less polarized matrix. The dipole-cluster phase above the transition temperature and superparaelectric fluctuations far below this temperature are identified for the relaxor ferroelectrics. We investigate the frequency dispersion and the time-domain spectrum of the dielectric relaxation, demonstrating the Vogel-Fulcher relationship and the multi-peaked time-domain distribution of the dielectric relaxation.

Relaxor ferroelectric and dielectric properties of(1-x)Ba(Zr_(1/3)Ti_(2/3))O_(3)-xBaMg_(0.1)Ta_(0.9))O_(3)ceramics

The environmentally-friendly(1-x)Ba(Zr_(1/3)Ti_(2/3))O_(3)-xBaMg_(0.1)Ta_(0.9))O_(3)(x=0,0.02,0.04,0.06,0.08)relaxor ferroelectric ceramics were prepared by the conventional solid-state method and sintered in air at 1400°C for 2 h.SEM and XRD analyses were utilized to study the surface morphologies and the crystalline structures,respectively.The effects of BaMg_(0.1)Ta_(0.9))O_(3)on the phase transformation,dielectric and ferroelectric properties of Ba(Zr_(1/3)Ti_(2/3))O_(3)ceramics were also investigated.It is found that the average grain size of(1-x)Ba(Zr_(1/3)Ti_(2/3))O_(3)-xBaMg_(0.1)Ta_(0.9))O_(3)(BZT-BMT)perovskite single-phase ceramics decreases as the content of BaMg_(0.1)Ta_(0.9))O_(3)(BMT)increases.The relaxor ferroelectric behavior with diffuse phase transition and well-defined frequency dispersion of dielectric maximum temperature is found for the ceramic with increasing x values.0.98BZT-0.02BMT ceramic shows very good dielectric properties with the relative permittivity and the dielectric loss,measured at 100 k Hz as 6034 and 0.01399 respectively at room temperature.Both remnant polarization and coercive field decreased with increasing BMT content,indicating a transition from the ferroelectric phase to the paraelectric phase at room temperature.

NUMERICAL ANALYSIS OF DIELECTRIC RESPONSE IN RELAXOR FERROELECTRICS

The dielectric response of complex perovskite relaxor ferrolectrics Pb(Mg1/3Nb2/3) O3 with respect to temperature and frequency was carefully measured. Using a normalized method of the 'universal' many-body theory, the relaxation process was analyzed around the temperature of dielectric absorption maximum. There is no structural phase transition near this temperature and the behavior is closely like that of a polar dipole medium. The functional relationship about frequency and temperature of dielectric pormittivity maximum was also fitted to discuss the dynamic behavior of polar microregion. It is confirmed that a new power exponential Arrhenius relation is better to characterize the relaxation behavior than the Vogel-Fulcher and Debye relations. Based on the polarization theory of polar dipoles, we analyzed the relaxation mechanism of ferroelectric microdomains of relaxor ferroelectrics, and get an ideal distribution function of relaxation time. Consequently, a simulated dielectric response dependence on temperature and frequencies can be expressed, which is well coincided with experiment results.

Large Energy Capacitive High-Entropy Lead-Free Ferroelectrics

Advanced lead-free energy storage ceramics play an indispensable role in next-generation pulse power capacitors market.Here,an ultrahigh energy storage density of~13.8 J cm^(-3)and a large efficiency of~82.4%are achieved in high-entropy lead-free relaxor ferroelectrics by increasing configuration entropy,named high-entropy strategy,realizing nearly ten times growth of energy storage density compared with low-entropy material.Evolution of energy storage performance and domain structure with increasing configuration entropy is systematically revealed for the first time.The achievement of excellent energy storage properties should be attributed to the enhanced random field,decreased nanodomain size,strong multiple local distortions,and improved breakdown field.Furthermore,the excellent frequency and fatigue stability as well as charge/discharge properties with superior thermal stability are also realized.The significantly enhanced comprehensive energy storage performance by increasing configuration entropy demonstrates that high entropy is an effective but convenient strategy to design new high-performance dielectrics,promoting the development of advanced capacitors.

Moderate Fields, Maximum Potential: Achieving High Records with Temperature‑Stable Energy Storage in Lead‑Free BNT‑Based Ceramics

The increasing awareness of environmental concerns has prompted a surge in the exploration of leadfree,high-power ceramic capacitors.Ongoing efforts to develop leadfree dielectric ceramics with exceptional energystorage performance(ESP)have predominantly relied on multicomponent composite strategies,often accomplished under ultrahigh electric fields.However,this approach poses challenges in insulation and system downsizing due to the necessary working voltage under such conditions.Despite extensive study,bulk ceramics of(Bi_(0.5)Na_(0.5))TiO_(3)(BNT),a prominent lead-free dielectric ceramic family,have seldom achieved a recoverable energy-storage(ES)density(Wrec)exceeding 7 J cm^(−3).This study introduces a novel approach to attain ceramic capacitors with high ESP under moderate electric fields by regulating permittivity based on a linear dielectric model,enhancing insulation quality,and engineering domain structures through chemical formula optimization.The incorporation of SrTiO_(3)(ST)into the BNT matrix is revealed to reduce the dielectric constant,while the addition of Bi(Mg_(2/3)Nb_(1/3))O_(3)(BMN)aids in maintaining polarization.Additionally,the study elucidates the methodology to achieve high ESP at moderate electric fields ranging from 300 to 500 kV cm^(−1).In our optimized composition,0.5(Bi_(0.5)Na_(0.4)K_(0.1))TiO_(3)–0.5(2/3ST-1/3BMN)(B-0.5SB)ceramics,we achieved a Wrec of 7.19 J cm^(−3) with an efficiency of 93.8%at 460 kV cm^(−1).Impressively,the B-0.5SB ceramics exhibit remarkable thermal stability between 30 and 140℃ under 365 kV cm^(−1),maintaining a Wrec exceeding 5 J cm^(−3).This study not only establishes the B-0.5SB ceramics as promising candidates for ES materials but also demonstrates the feasibility of optimizing ESP by modifying the dielectric constant under specific electric field conditions.Simultaneously,it provides valuable insights for the future design of ceramic capacitors with high ESP under constraints of limited electric field.

Enhanced energy storage properties and good stability of novel(1-x)Na_(0.5)Bi_(0.5)TiO_(3)-xCa(Mg_(1/3)Nb_(2/3))O_(3) relaxor ferroelectric ceramics prepared by chemical modification

The increase in energy consumption and its collateral damage on the environment has encouraged the development of environment-friendly ceramic materials with good energy storage properties.In this work,(1-x)Na_(0.5)Bi_(0.5)TiO_(3)-xCa(Mg_(1/3)Nb_(2/3))O_(3) ceramics were synthesized by the solid-state reaction method.The 0.88Na_(0.5)Bi_(0.5)TiO_(3)-0.12Ca(Mg_(1/3)Nb_(2/3))O_(3) ceramic exhibited a high recoverable energy storage density of 8.1 J/cm3 and energy storage efficiency of 82.4% at 550 kV/cm.The introduction of Ca(Mg_(1/3)Nb_(2/3))O_(3) reduced the grain size and increased the band gap,thereby enhancing the breakdown field strength of the ceramic materials.The method also resulted in good temperature stability(20–140℃),frequency stability(1–200 Hz),and fatigue stability over 10^(6) cycles.In addition,an ultrahigh power density of 187 MW/cm^(3) and a fast charge-discharge rate(t_(0.9)=57.2 ns)can be obtained simultaneously.Finite element method analysis revealed that the decrease of grain size was beneficial to the increase of breakdown field strength.Therefore,the 0.88Na_(0.5)Bi_(0.5)TiO_(3)-0.12Ca(Mg_(1/3)Nb_(2/3))O_(3) ceramics resulted in high energy storage properties with good stability and were promising environment-friendly materials for advanced pulsed power systems applications.

Relaxor antiferroelectric-relaxor ferroelectric crossover in NaNbO_(3)-based lead-free ceramics for high-efficiency large-capacitive energy storage

Relaxor ferroic dielectrics have garnered increasing attention in the past decade as promising materials for energy storage.Among them,relaxor antiferroelectrics(AFEs)and relaxor ferroelectrics(FEs)have shown great promise in term of high energy storage density and efficiency,respectively.In this study,a unique phase transition from relaxor AFE to relaxor FE was achieved for the first time by introducing strong-ferroelectricity BaTiO_(3)into NaNbO_(3)-BiFeO_(3)system,leading to an evolution from AFE R hierarchical nanodomains to FE polar nanoregions.A novel medium state,consisting of relaxor AFE and relaxor FE,was identified in the crossover of 0.88NaNbO_(3)–0.07BiFeO_(3)–0.05BaTiO_(3)ceramic,exhibiting a distinctive core-shell grain structure due to the composition segregation.By harnessing the advantages of high energy storage density from relaxor AFE and large efficiency from relaxor FE,the ceramic showcased excellent overall energy storage properties.It achieved a substantial recoverable energy storage density W_(rec)~13.1 J/cm^(3)and an ultrahigh efficiencyη~88.9%.These remarkable values shattered the trade-off relationship typically observed in most dielectric capacitors between W_(rec)andη.The findings of this study provide valuable insights for the design of ceramic capacitors with enhanced performance,specifically targeting the development of next generation pulse power devices.

Excellent energy storage performance in Bi_(0.5)Na_(0.5)TiO_(3)-based lead-free high-entropy relaxor ferroelectrics via B-site modification

Next-generation advanced high/pulsed power capacitors urgently require dielectric materials with outstanding energy storage performance.Bi_(0.5)Na_(0.5)TiO_(3)-based lead-free materials exhibit high polarization,but the high remanent polarization and large polarization hysteresis limit their applications in dielectric capacitors.Herein,high-entropy perovskite relaxor ferroelectrics(Na_(0.2)Bi_(0.2)Ba_(0.2)Sr_(0.2)Ca_(0.2))(Ti1-x%Zrx%)O_(3)are designed by adding multiple ions in the A-site and replacing the B-site Ti^(4+)with a certain amount of Zr^(4+).The newly designed system showed high relaxor feature and slim polarization-electric(P-E)loops.Especially,improved relaxor feature and obviously delayed polarization saturation were found with the increasing of Zr^(4+).Of particular importance is that both high recoverable energy storage density of 6.6 J/cm^(3) and energy efficiency of 93.5%were achieved under 550 kV/cm for the ceramics of x=6,accompanying with excellent frequency stability,appreciable thermal stability,and prosperous discharge property.This work not only provides potential dielectric materials for energy storage applications,but also offers an effective strategy to obtain dielectric ceramics with ultrahigh comprehensive energy storage performance to meet the demanding requirements of advanced energy storage applications.

Elastic,dielectric,and piezoelectric characterization of 0.92Pb(Zn_(1/3) Nb_(2/3))O_3-0.08PbTiO_3 single crystal by Brillouin scattering

In this paper,a complete set of elastic,piezoelectric,and dielectric constants of high-quality tetragonal poled0.92Pb（Zn1/3Nb2/3）O3-0.08PbTiO3 single crystal grown by the modified flux method is determined using high-resolution Brillouin scattering.A comparison is made between the results obtained by a hybrid method combining ultrasonic and resonant techniques and the results obtained by the Brillouin scattering.The elastic,piezoelectric,and dielectric constants obtained by the two methods are similar.The Brillouin spectrum consists of one longitudinal and two transverse acoustic phonon modes,and the variations of the Brillouin shifts,the full widths at half maximum,and the scattering intensities of these modes with scattering angle 9 are investigated.In particular,the transverse acoustic phonon mode at the lowfrequency becomes markedly soft from 28.2 GHz to 18.4 GHz and broadens gradually with the increase of θ,while its intensity decreases gradually as compared with that of the original one.The possible origins of the results are discussed.

High energy storage capability of perovskite relaxor ferroelectrics via hierarchical optimization

Ultrafast charge/discharge process and ultrahigh power density enable dielectrics essential components in modern electrical and electronic devices, especially in pulse power systems. However, in recent years, the energy storage performances of present dielectrics are increasingly unable to satisfy the growing demand for miniaturization and integration, which stimulates further researches on dielectrics with higher energy density and efficiency.Among various inorganic dielectrics, perovskite relaxor ferroelectrics are recognized as promising candidates for energy storage applications, with high permittivity and relatively high efficiency. Here, we focus on recent progress and achievements on optimizing perovskite relaxor ferroelectrics toward better energy storage capability through hierarchical design. The principles and key parameters of dielectric energy storage, together with the definition of majority types of dielectrics, are introduced at first. Strategies within various scales include domain, grain size, orientation, and composite engineering are summarized. The existing challenges are presented and future prospects are proposed in the end, with the background of both academic explorations and industrial applications.

Optimizing energy harvesting performance by tailoring ferroelectric/relaxor behavior in KNN-based piezoceramics

Piezoelectric energy harvesters(PEHs)fabricated using piezoceramics could convert directly the mechanical vibration energy in the environment into electrical energy.The high piezoelectric charge coefficient(d_(33))and large piezoelectric voltage coefficient(g_(33))are key factors for the high-performance PEHs.However,high d_(33)and large g_(33)are difficult to simultaneously achieve with respect to g_(33)=d_(33)/(e_(0)e_(r))and d_(33)=2Qe_(0)e_(r)P_(r).Herein,the energy harvesting performance is optimized by tailoring the CaZrO_(3)content in(0.964−x)(K_(0.52)Na_(0.48))(Nb_(0.96)Sb_(0.04))O_(3)-0.036(Bi_(0.5)Na_(0.5))ZrO_(3)-xCaZrO_(3)ceramics.First,the doping CaZrO_(3)could enhance the dielectric relaxation due to the compositional fluctuation and structural disordering,and thus reduce the domain size to~30 nm for x=0.006 sample.The nanodomains switch easily to external electric field,resulting in large polarization.Second,the rhombohedral-orthorhombic-tetragonal phases coexist in x=0.006 sample,which reduces the polarization anisotropy and thus improves the piezoelectric properties.The multiphase coexistence structures and miniaturized domains contribute to the excellent piezoelectric properties of d_(33)(354 pC/N).Furthermore,the dielectric relative permittivity(ε_(r))reduces monotonously as the CaZrO_(3)content increases due to the relatively low ion polarizability of Ca^(2+)and Zr^(4+).As a result,the optimized energy conversion coefficient(d_(33)×g_(33),5508×10^(−15)m^(2)/N)is achieved for x=0.006 sample.Most importantly,the assembled PEH with the optimal specimen shows the excellent output power(~48 mW)and lights up 45 red commercial light-emitting diodes(LEDs).This work demonstrates that tailoring ferroelectric/relaxor behavior in(K,Na)NbO_(3)-based piezoelectric ceramics could effectively enhance the electrical output of PEHs.

Enhanced antiferroelectric-like relaxor ferroelectric characteristic boosting energy storage performance of(Bi_(0.5)Na_(0.5))TiO_(3)-based ceramics via defect engineering

3Lead-free(BiasNaus)TiO_(3)(BNT)-based relaxor ferroelectric(RFE)ceramics have attracted a lot of atten-tion due to their high power density and rapid charge-discharge apabilities,as well as their potential application in pulse power capacitors.However,because of the desire for smaller electronic devices,their energy storage performance(ESP)should be enhanced even further.We describe a defect engineering strategy for enhancing the antiferroelectric-like RFE feature of BNT-based ceramics by unequal substi-tution of rare-earth La^(3+)in this paper.The ESP of La^(3+)-doped samples is raised by 25%with the same synthetic procedure and thidkness,due to an inrease in the critical electric field(E-field)and saturated E-field during polarization response,which is induced by a modifiation in the energy barrier between the lattice torsion.More impressively,an ultrahigh recoverable energy storage density Wrec of 8.58J/cm^(3)and a high energy storage efficiengyηof 945%are simultaneously attained in 3 at.%La^(3+)-substituted 0.6(Bi_(0.5)Na_(0.4)K_(0.1))_(1-1.5x)La_(x)TiO_(3)-0.4[2/3SrTiO_(3)-1/3Bi(Mg_(2/3)Ni_(1/3))O_(3)]RFE ceamics with good temperatue stability(W_(rec)=4.6±0.2 J/cm^(3)and higher n of 290%from 30℃to 120℃),frequency stability,and fatigue resistance.The significant inrease in ESP achieved through defect engineering not only proves the effectiveness of our strategy,but also presents a novel dielectric material with potential applications in pulse power apacitors.

Phase evolution and relaxor to ferroelectric phase transition boosting ultrahigh electrostrains in (1-x)(Bi_(1/2)Na_(1/2))TiO_(3)-x(Bi_(1/2)K_(1/2))TiO_(3) solid solutions

Owing to the complex composition architecture of these solid solutions,some fundamental issues of the classical(1-x)(Bi_(1/2)Na_(1/2))TiO_(3) -x(Bi_(1/2)K_(1/2))TiO_(3)(BNT-xBKT)binary system,such as details of phase evolution and optimal Na/K ratio associated with the highest strain responses,remain unresolved.In this work,we systematically investigated the phase evolution of the BNT-xBKT binary solid solution with x ranging from 0.12 to 0.24 using not only routine X-ray diffraction and weak-signal dielectric characterization,but also temperature-dependent polarization versus electric field(P-E)and current versus electric field(I-E)curves.Our results indicate an optimal Na/K ratio of 81/19 based on high-field polarization and elec-trostrain characterizations.As the temperature increased above 100?C,the x¼0.19 composition pro-duces ultrahigh electrostrains(>0.5%)with high thermal stability.The ultrahigh and stable electrostrains were primarily due to the combined effect of electric-field-induced relaxor-to-ferroelectric phase tran-sition and ferroelectric-to-relaxor diffuse phase transition during heating.More specifically,we revealed the relationship between phase evolution and electrostrain responses based on the characteristic tem-peratures determined by both weak-field dielectric and high-field ferroelectric/electromechanical property characterizations.This work not only clarifies the phase evolution in BNT-xBKT binary solid solution,but also paves the way for future strain enhancement through doping strategies.

Fatigue-less relaxor ferroelectric thin films with high energy storage density via defect engineer

Thin film capacitors with excellent energy storage performances,thermal stability and fatigue endurance are strongly desired in modern electrical and electronic industry.Herein,we design and prepare lead-free0.7Sr_(0.7)Bi_(0.2)TiO_(3)-0.3BiFeO_(3)-x%Mn(x=0,0.5,1.5,2,3)thin films via sol-gel method.Mn ions of divalent valence combine with oxygen vacancies,forming defect complex,which results in marked decline in leakage current and obvious enhancement in breakdown strength.A high energy storage density~47.6 J cm^(-3)and good efficiency~65.68%are simultaneously achieved in 2%Mn doped 0.7Sr_(0.7)Bi_(0.2)TiO_(3)-0.3 BiFeO_(3)thin film capacitor.Moreover,the 2%Mn-doped thin film exhibits excellent thermal stability in wide operating temperature range(35–115℃)and strong fatigue endurance behaviors after 108 cycles.The above results demonstrate that 2%Mn-doped 0.7Sr_(0.7)Bi_(0.2)TiO_(3)-0.3 BiFeO_(3)thin film capacitor with superior energy storage performances is a potential candidate for electrostatic energy storage.

DIELECTRIC RELAXATION IN RELAXOR FERROELECTRICS

In this review the dielectric properties of relaxor ferroelectrics are discussed and compared withthe properties of normal dielectrics and ferroelectrics. We try to draw a general picture ofdielectric relaxation starting from a textbook review of the underlying concepts and pay attentionto common behavior of relaxors rather than to the features observed in specific materials. We hopethat this general approach is beneficial to those physicists, chemists, material scientists and deviceengineers who deal with relaxors. Based on the analysis of dielectric properties, a comprehensivedefinition of relaxors is proposed: relaxors are defined as ferroelectrics in which the maximum inthe temperature dependence of static susceptibility occurs within the temperature range ofdielectric relaxation, but does not coincide with the temperature of singularity of relaxation timeor soft mode frequency.

Recent Developments in Functional Crystals in China

Functional crystals are the basic materials for the development of modern science and technology and are playing key roles in the modern information era. In this paper, we review functional crystals in China, including research history, significant achievements, and important applications by highlighting the most recent progress in research. Challenges for the development of functional materials are discussed and possible directions for development are proposed by focusing on potential strengths of these materials.

Large electrostrain in Bi_(1/2)Na_(1/2)TiO_(3)-based relaxor ferroelectrics:A case study of Bi_(1/2)Na_(1/2)TiO3-Bi_(1/2)K_(1/2)TiO_(3)-Bi(Ni_(2/3)Nb_(1/3))O_(3) ceramics

(1-x)(0.8Bi_(1/2)Na_(1/2)TiO3-0.2Bi_(1/2)K_(1/2)TiO3)-xBi(Ni_(2/3)Nb_(1/3))O3(BNKT-xBNN)solid solution ceramics were fabricated by high temperature solid-state reaction method.All the compositions possess relaxor ferroelectric features,among which the ergodic BNKT-0.02BNN exhibits large repeatable electrostrain value Suni¼0.51%at electric field of 65 kV/cm,with high piezoelectric stain coefficient d33*of 890 pm/V at 45 kV/cm,while the non-ergodic compositions present unrepeatable large strain response.Based on the electric field-composition phase diagram,the repeatability of strain response in ergodic compositions can be attributed to the reversible electric-field-induced phase transition.In addition,the effects of BNN contents on the macroscopic strain properties are explored by analyzing the existing states of the polar regions with corresponding thermal evolutions and electric-field-induced phase transitions.This research is expected to guide the design of lead free relaxor ferroelectric materials with desired electrostrain properties.

Relaxor behavior and Raman spectra of CuO-doped Pb(Mg_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)ferroelectric ceramics

In this work,Raman spectra and dielectricity-temperature dependence measurements were used to investigate the B-site order degree in CuO-doped Pb(Mg_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)ferroelectric ceramics.The measurement results indicated a typical relaxor characteristic for all samples.With the increasing of CuO doping content,the B-site order degree increased first and then decreased.However,the frequency dispersion and the relaxation degree decreased first and then increased while the CuO addition content was increasing,which was thought to be strongly correlated with the variations of the B-site order.The opposite variation tendency of the B-site order degree and the relaxation degree revealed that the phase transition dispersity is closely related to the order-disorder behaviors.

Improved energy storage performance of bismuth sodium titanate-based lead-free relaxor ferroelectric ceramics via Bi-containing complex ions doping

Lead-free dielectric ceramics can be used to make quick charge-discharge capacitor devices due to their high power density.Their use in advanced electronic systems,however,has been hampered by their poor energy storage performance(ESP),which includes low energy storage efficiency and recoverable energy storage density(Wrec).In this work,we adopted a combinatorial optimization strategy to improve the ESP in(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based relaxor ferroelectric ceramics.To begin,the Bi-containing complex ions Bi(Mg_(2/3)Nb_(1/3))O_(3)(BMN)were introduced into a BNT-based matrix in order to improve the diffuse phase transition,increase Bi-O bond coupling,avoid macro domain development,and limit polarization response hysteresis.Second,the viscous polymer process was employed to reduce sample thickness and porosity,resulting in an apparent increase in breakdown strength in(1-x)[0.7(Bi_(1/2)Na_(1/2))TiO_(3)]-0.3SrTiO_(3)-xBi(Mg_(2/3)Nb_(1/3))O_(3)(BS-xBMN)ceramics.Finally,in x=0.20 composition,an amazing Wrecof 5.62 J·cm^(-3)and an ultra-high efficiency of 91.4%were simultaneously achieved at a relatively low field of 330 kV·cm^(-1),together with remarkable temperature stability in the temperature range of 30-140℃(3.5 J·cm^(-3)±5%variation).This research presents a new lead-free dielectric material with superior ESP for use in pulsed power capacitors.