A novel fiber magnetic sensor based on the fiber Bragg grating Fabry-Perot （FBG-FP） cavity ring-down technique with pulse laser injection is proposed and demonstrated theoretically. A general expression of the inten...A novel fiber magnetic sensor based on the fiber Bragg grating Fabry-Perot （FBG-FP） cavity ring-down technique with pulse laser injection is proposed and demonstrated theoretically. A general expression of the intensity of the output electric field is derived, and the effect of the external magnetic field on the ring-down time is discussed. The results show that the output light intensity and the ring-down time of the FBG-FP cavity are in the inverse proportion to the magnitude of the external magnetic field. Our results demonstrate the new concept of the fiber magnetic sensor with the FBG-FP cavity ring-down spectroscopy and the technical feasibility.展开更多
The sensing characteristics of irradiated fiber Bragg gratings(FBGs)and Fabry-Perot interferometers(FPIs)were investigated under a 2MGy dose of gamma radiation.The study found that the pressure sensitivity of FP senso...The sensing characteristics of irradiated fiber Bragg gratings(FBGs)and Fabry-Perot interferometers(FPIs)were investigated under a 2MGy dose of gamma radiation.The study found that the pressure sensitivity of FP sensors after irradiation was stable,while the temperature sensitivity of FBG sensors was unstable,and both wavelengths displayed a shift.These findings offer the possibility for the application of FP pressure sensors in the gamma radiation environments,and FBG sensors require further research to be suitable for application in the nuclear radiation environments.展开更多
The characteristics of transmission spectra for the all fiber, multi-cavity Fabry- Perot （FP） configuration based on fiber Bragg gratings （FBG） are theoretically analyzed and modeled. The general transmission matr...The characteristics of transmission spectra for the all fiber, multi-cavity Fabry- Perot （FP） configuration based on fiber Bragg gratings （FBG） are theoretically analyzed and modeled. The general transmission matrix function for the structure with any number of cavities is derived, and explicit expression of the power trans- mission coefficient for symmetrical two-cavity FP is presented. The general condi- tions for flat-top single resonant peak at the central wavelength in FBG stop band are derived and verified in the numerical simulation section. The transmission peaks of single-cavity and two-cavity FP structures are compared and discussed, and results show that compared to the single-cavity FP, flatness of the top and steepness at the edge of transmission peak can be improved by introducing one more cavity. The resonant transmission peak properties of two-cavity structure are investigated in detail for various values of cavity length and FBGs with different reflection characteristics, and the design guidelines for transmission-type filters are presented. The results show that the steepness of peak slope can be improved by increase of FBG reflectivities, and these kinds of filters can be used as nar- row-band single-channel selectors and multi-channel wavelength de-multiplexing by properly choosing the length of cavities and reflectivities of FBGs.展开更多
This article reviews author＇s research work on fiber-optic sensors over the last twenty years. It includes two aspects： low-coherence interferometric sensors （LCI） and fiber Bragg grating （FBG） sensors. For LCI ...This article reviews author＇s research work on fiber-optic sensors over the last twenty years. It includes two aspects： low-coherence interferometric sensors （LCI） and fiber Bragg grating （FBG） sensors. For LCI sensors, author＇s work mainly focuses on the interrogation and multiplexing methods for Fizeau and Fabry-Perot interferometric sensors at the University of Kent at Canterbury （UKC）, UK, and study on novel Fabry-Perot interferometric sensors and their multiplexing methods at Chongqing University （CQU） and University of Electronic Science ＆ Technology of China （UESTC）, China, respectively. For FBG sensors, a number of multiplexing schemes are proposed and demonstrated at UKC, and then novel methods for realization of multi-parameter measurement and long-distance measurement based on the FBG sensor and its combination with other optical fiber sensors are also reported at CQU ＆ UESTC. Thus, author＇s study on these two topics can be diviaed into two periods, at UKC and at CQU ＆ UESTC, China. This review is presented in such a time sequence.展开更多
A simple nanostrain direct current （DC） measurement system based on a chirped Bragg grating Fabry-Perot （FP） structure is presented. The FP cavity, formed between the chirped fiber Bragg grating （CFBG） and the f...A simple nanostrain direct current （DC） measurement system based on a chirped Bragg grating Fabry-Perot （FP） structure is presented. The FP cavity, formed between the chirped fiber Bragg grating （CFBG） and the fiber end face, presents an aperiodic behavior due to the CFBG. A laser located in the fringe pattern slope is used to interrogate the sensing head. The optical power parameter is analyzed when strain is applied, for long and short period fringe pattern wavelengths, and sensitivities of-2.87 μW/με and-5.48μW/με are respectively obtained. This configuration presents a resolution of 70 ε.展开更多
A fiber Bragg grating(FBG) and Fabry–Perot(FP) cavity cascaded fiber sensing system was manufactured for temperature and pressure sensing. Temperature sensing as high as 175°C was performed by an FBG for the lin...A fiber Bragg grating(FBG) and Fabry–Perot(FP) cavity cascaded fiber sensing system was manufactured for temperature and pressure sensing. Temperature sensing as high as 175°C was performed by an FBG for the linear variation of an FBG wavelength with temperature. After the temperature was sensed, the demodulation system can find the original FP cavity length and its pressure and cavity length correlation coefficient; thus, the ambient pressure would be calculated. The sensing pressure can be as high as 100 MPa with a repeatability of 1/10,000 and high stability. This kind of fiber sensor has been used in the Shengli Oil Field.展开更多
This paper reviews a wide variety of fiber-optic microstructure(FOM)sensors,such as fiber Bragg grating(FBG)sensors,long-period fiber grating(LPFG)sensors,Fabry-Perot interferometer(FPI)sensors,Mach-Zchnder interferom...This paper reviews a wide variety of fiber-optic microstructure(FOM)sensors,such as fiber Bragg grating(FBG)sensors,long-period fiber grating(LPFG)sensors,Fabry-Perot interferometer(FPI)sensors,Mach-Zchnder interferometer(MZI)sensors,Michelson interferometer(MI)sensors,and Sagnac interferometer(SI)sensors.Each FOM sensor has been introduced in the terms of structure types,fabrication methods,and their sensing applications.In addition,the sensing characteristics of different structures under the same type of FOM sensor are compared,and the sensing characteristics of the all FOM sensors,including advantages,disadvantages,and main sensing parameters,are summarized.We also discuss the future development of FOM sensors.展开更多
A probe-shaped sensor for simultaneous temperature and pressure measurement was reported in this article.The effective length of the sensor was〜2 mm,consisting of a fiber Bragg grating(FBG)and a Fabry-Perot interferom...A probe-shaped sensor for simultaneous temperature and pressure measurement was reported in this article.The effective length of the sensor was〜2 mm,consisting of a fiber Bragg grating(FBG)and a Fabry-Perot interferometer(FPI)with a nano silica diaphragm.The response sensitivities of the sensor for pressure and temperature were measured as-0.98 nm/MPa and 11.10pm/℃,respectively.This sensor had an extremely low cross-sensitivity between pressure and temperature,which provided a significant potential in dual-parameter sensing.展开更多
文摘A novel fiber magnetic sensor based on the fiber Bragg grating Fabry-Perot （FBG-FP） cavity ring-down technique with pulse laser injection is proposed and demonstrated theoretically. A general expression of the intensity of the output electric field is derived, and the effect of the external magnetic field on the ring-down time is discussed. The results show that the output light intensity and the ring-down time of the FBG-FP cavity are in the inverse proportion to the magnitude of the external magnetic field. Our results demonstrate the new concept of the fiber magnetic sensor with the FBG-FP cavity ring-down spectroscopy and the technical feasibility.
基金This work was funded by the National Science Foundation of China(NCSF)(Grant No.51875091)the Study and Application of Full-model Impact Dynamic Fretting Damage Test System in the Extreme Environment(Grant No.51627806)+3 种基金Research on Application of Optical Fiber Sensing in Nuclear Power(Grant No.180046)Optical Fiber Sensing and Processing Prototype for Nuclear Field Key Parameter Measurement(Grant No.191091)Data Acquisition and Post-processing Software Development for Integrated Fiber Optic Sensors(Grant No.190167)the State 111 Project(Grant No.B14039).
文摘The sensing characteristics of irradiated fiber Bragg gratings(FBGs)and Fabry-Perot interferometers(FPIs)were investigated under a 2MGy dose of gamma radiation.The study found that the pressure sensitivity of FP sensors after irradiation was stable,while the temperature sensitivity of FBG sensors was unstable,and both wavelengths displayed a shift.These findings offer the possibility for the application of FP pressure sensors in the gamma radiation environments,and FBG sensors require further research to be suitable for application in the nuclear radiation environments.
基金Supported by the Fund of Beijing Jiaotong University (Grant No. 2006XZ010)the Program for New Century Excellent Telants in University (Grant No. NCET-06-0076)
文摘The characteristics of transmission spectra for the all fiber, multi-cavity Fabry- Perot （FP） configuration based on fiber Bragg gratings （FBG） are theoretically analyzed and modeled. The general transmission matrix function for the structure with any number of cavities is derived, and explicit expression of the power trans- mission coefficient for symmetrical two-cavity FP is presented. The general condi- tions for flat-top single resonant peak at the central wavelength in FBG stop band are derived and verified in the numerical simulation section. The transmission peaks of single-cavity and two-cavity FP structures are compared and discussed, and results show that compared to the single-cavity FP, flatness of the top and steepness at the edge of transmission peak can be improved by introducing one more cavity. The resonant transmission peak properties of two-cavity structure are investigated in detail for various values of cavity length and FBGs with different reflection characteristics, and the design guidelines for transmission-type filters are presented. The results show that the steepness of peak slope can be improved by increase of FBG reflectivities, and these kinds of filters can be used as nar- row-band single-channel selectors and multi-channel wavelength de-multiplexing by properly choosing the length of cavities and reflectivities of FBGs.
文摘This article reviews author＇s research work on fiber-optic sensors over the last twenty years. It includes two aspects： low-coherence interferometric sensors （LCI） and fiber Bragg grating （FBG） sensors. For LCI sensors, author＇s work mainly focuses on the interrogation and multiplexing methods for Fizeau and Fabry-Perot interferometric sensors at the University of Kent at Canterbury （UKC）, UK, and study on novel Fabry-Perot interferometric sensors and their multiplexing methods at Chongqing University （CQU） and University of Electronic Science ＆ Technology of China （UESTC）, China, respectively. For FBG sensors, a number of multiplexing schemes are proposed and demonstrated at UKC, and then novel methods for realization of multi-parameter measurement and long-distance measurement based on the FBG sensor and its combination with other optical fiber sensors are also reported at CQU ＆ UESTC. Thus, author＇s study on these two topics can be diviaed into two periods, at UKC and at CQU ＆ UESTC, China. This review is presented in such a time sequence.
文摘A simple nanostrain direct current （DC） measurement system based on a chirped Bragg grating Fabry-Perot （FP） structure is presented. The FP cavity, formed between the chirped fiber Bragg grating （CFBG） and the fiber end face, presents an aperiodic behavior due to the CFBG. A laser located in the fringe pattern slope is used to interrogate the sensing head. The optical power parameter is analyzed when strain is applied, for long and short period fringe pattern wavelengths, and sensitivities of-2.87 μW/με and-5.48μW/με are respectively obtained. This configuration presents a resolution of 70 ε.
基金supported by the National Natural Science Foundation of China(No.61605102)the Taishan Scholar Program(No.tsqn20161061)
文摘A fiber Bragg grating(FBG) and Fabry–Perot(FP) cavity cascaded fiber sensing system was manufactured for temperature and pressure sensing. Temperature sensing as high as 175°C was performed by an FBG for the linear variation of an FBG wavelength with temperature. After the temperature was sensed, the demodulation system can find the original FP cavity length and its pressure and cavity length correlation coefficient; thus, the ambient pressure would be calculated. The sensing pressure can be as high as 100 MPa with a repeatability of 1/10,000 and high stability. This kind of fiber sensor has been used in the Shengli Oil Field.
基金funded by the National Natural Science Foundation of China(NCSF)(Grant Nos.51205049,51875091,and 51327806)the state 111 Project(Grant No.Bl4039).
文摘This paper reviews a wide variety of fiber-optic microstructure(FOM)sensors,such as fiber Bragg grating(FBG)sensors,long-period fiber grating(LPFG)sensors,Fabry-Perot interferometer(FPI)sensors,Mach-Zchnder interferometer(MZI)sensors,Michelson interferometer(MI)sensors,and Sagnac interferometer(SI)sensors.Each FOM sensor has been introduced in the terms of structure types,fabrication methods,and their sensing applications.In addition,the sensing characteristics of different structures under the same type of FOM sensor are compared,and the sensing characteristics of the all FOM sensors,including advantages,disadvantages,and main sensing parameters,are summarized.We also discuss the future development of FOM sensors.
基金This work was supported by National Natural Science Foundation of China(NSFC)(Grant Nos.61905165 and 61635007)Natural Science Foundation of Guangdong Province(Grant Nos.2019A050510047,2019B1515120042,and 2018A030310581)+1 种基金Education Department of Guangdong Province(Grant No.2018KQNCX219)Science and Technology Innovation Commission of Shenzhen(Grant Nos.JCYJ20170412105604705,JCYJ20180305125352956,JCYJ20170818143853289,and JC YJ20170818093743767).
文摘A probe-shaped sensor for simultaneous temperature and pressure measurement was reported in this article.The effective length of the sensor was〜2 mm,consisting of a fiber Bragg grating(FBG)and a Fabry-Perot interferometer(FPI)with a nano silica diaphragm.The response sensitivities of the sensor for pressure and temperature were measured as-0.98 nm/MPa and 11.10pm/℃,respectively.This sensor had an extremely low cross-sensitivity between pressure and temperature,which provided a significant potential in dual-parameter sensing.
