We demonstrate a cost effective, linearly tunable fiber optical parametric oscillator based on a home-made photonic crystal fiber pumped with a mode-locked ytterbium-doped fiber laser, providing linely tuning ranges f...We demonstrate a cost effective, linearly tunable fiber optical parametric oscillator based on a home-made photonic crystal fiber pumped with a mode-locked ytterbium-doped fiber laser, providing linely tuning ranges from 1018 nm to 1038 nm for the idler wavelength and from 1097 nm to 1117 nm for the signal wavelength by tuning the pump wavelength and the cavity length. In order to obtain the desired fiber with a zero dispersion wavelength around 1060 rim, eight sam- ples of photonic crystal fibers with gradually changed structural parameters are fabricated for the reason that it is difficult to accurately customize the structural dimensions during fabrication. We verify the usability of the fabricated fiber experimen- tally via optical parametric generation and conclude a successful procedure of design, fabirication, and verification. A seed source of home-made all-normal-dispersion mode-locked ytterbium-doped fiber laser with 38.57 ps pulsewidth around the 1064 nm wavelength is used to pump the fiber optical parametric oscillator. The wide picosecond pulse pump laser enables a larger walk-off tolerance between the pump light and the oscillating light as well as a longer photonic crystal fiber of 20 m superior to the femtosecond pulse lasers, resulting in a larger parametric amplification and a lower threshold pump power of 15.8 dBm of the fiber optical parametric oscillator.展开更多
Water plays a vital role in biological metabolism and it would be essential to trace the water content non-invasively,such as leveraging the vibrational absorption peak of the O-H bond.However,due to the lack of an ef...Water plays a vital role in biological metabolism and it would be essential to trace the water content non-invasively,such as leveraging the vibrational absorption peak of the O-H bond.However,due to the lack of an efficient laser source,it was challenging to image the water content in the deep tissue with micron-level spatial resolution.To address this problem,we develop a high-power hybrid optical parametrically-oscillating emitter(HOPE)at 1930 nm,at which the vibrational absorption peak of the O-H bond locates.The maximum pulse energy is over 1.74μJ with a pulse repetition rate of 50 kHz and a pulse width of 15 ns.We employ this laser source in the optical-resolution photoacoustic microscopy(OR-PAM)system to image the water content in the phantom and the biological tissue in vitro.Our 1930-nm OR-PAM could map the water content in the complex tissue environment at high spatial resolution,deep penetration depth,improved sensitivity,and suppressed artifact signal of the lipid.展开更多
基金supported by the National Basic Research Program of China(Grant No.2010CB327606)the National Nature Science Foundation of China(Grant No.61108007)the Opened Fund of the State Key Laboratory on Integrated Optoelectronics,China
文摘We demonstrate a cost effective, linearly tunable fiber optical parametric oscillator based on a home-made photonic crystal fiber pumped with a mode-locked ytterbium-doped fiber laser, providing linely tuning ranges from 1018 nm to 1038 nm for the idler wavelength and from 1097 nm to 1117 nm for the signal wavelength by tuning the pump wavelength and the cavity length. In order to obtain the desired fiber with a zero dispersion wavelength around 1060 rim, eight sam- ples of photonic crystal fibers with gradually changed structural parameters are fabricated for the reason that it is difficult to accurately customize the structural dimensions during fabrication. We verify the usability of the fabricated fiber experimen- tally via optical parametric generation and conclude a successful procedure of design, fabirication, and verification. A seed source of home-made all-normal-dispersion mode-locked ytterbium-doped fiber laser with 38.57 ps pulsewidth around the 1064 nm wavelength is used to pump the fiber optical parametric oscillator. The wide picosecond pulse pump laser enables a larger walk-off tolerance between the pump light and the oscillating light as well as a longer photonic crystal fiber of 20 m superior to the femtosecond pulse lasers, resulting in a larger parametric amplification and a lower threshold pump power of 15.8 dBm of the fiber optical parametric oscillator.
基金This project is funded by Research Grants Council of the Hong Kong Special Administrative Region,China(HKU 17200219,HKU 17209018,E-HKU701/17,CityU T42-103/16-N,and HKU C7047-16G)Natural Science Foundation of China(N_HKU712/16)。
文摘Water plays a vital role in biological metabolism and it would be essential to trace the water content non-invasively,such as leveraging the vibrational absorption peak of the O-H bond.However,due to the lack of an efficient laser source,it was challenging to image the water content in the deep tissue with micron-level spatial resolution.To address this problem,we develop a high-power hybrid optical parametrically-oscillating emitter(HOPE)at 1930 nm,at which the vibrational absorption peak of the O-H bond locates.The maximum pulse energy is over 1.74μJ with a pulse repetition rate of 50 kHz and a pulse width of 15 ns.We employ this laser source in the optical-resolution photoacoustic microscopy(OR-PAM)system to image the water content in the phantom and the biological tissue in vitro.Our 1930-nm OR-PAM could map the water content in the complex tissue environment at high spatial resolution,deep penetration depth,improved sensitivity,and suppressed artifact signal of the lipid.
