AHFO-based soil water content sensing technology considering soil-sensor thermal contact resistance

The actively heated fiber-optic(AHFO)technology has become emerged as a research focus due to its advantages of distributed,real-time measurement and good durability.These attributes have led to the gradual application of AHFO technology to the water content measurement of in situ soil.However,all existing in situ applications of AHFO technology fail to consider the effect of soilesensor contact quality on water content measurements,limiting potential for the wider application of AHFO technology.To address this issue,the authors propose a method for determining the soilesensor thermal contact resistance based on the principle of an infinite cylindrical heat source.This is then used to establish an AHFO water content measurement technology that considers the thermal contact resistance.The reliability and validity of the new measurement technology are explored through a laboratory test and a field case study,and the spatial-temporal evolution of the soil water content in the case is revealed.The results demonstrate that method for determining the soilesensor thermal contact resistance is highly effective and applicable to all types of soils.This method requires only the moisture content,dry density,and thermal response of the in situ soil to be obtained.In the field case,the measurement error of soil water content between the AHFO method,which takes into account the thermal contact resistance,and the neutron scattering method is only 0.011.The water content of in situ soil exhibits a seasonal variation,with an increase in spring and autumn and a decrease in summer and winter.Furthermore,the response of shallow soils to precipitation and evaporation is significant.These findings contribute to the enhancement of the accuracy of the AHFO technology in the measurement of the water content of in situ soils,thereby facilitating the dissemination and utilization of this technology.

Structural Deformation Monitoring of Flight Vehicles Based on Optical Fiber Sensing Technology:A Review and Future Perspectives

Structural deformation monitoring of flight vehicles based on optical fiber sensing(OFS)technology has been a focus of research in the field of aerospace.After nearly 30 years of research and development,Chinese and international researchers have made significant advances in the areas of theory and methods,technology and systems,and ground experiments and flight tests.These advances have led to the development of OFS technology from the laboratory research stage to the engineering application stage.However,a few problems encountered in practical applications limit the wider application and further development of this technology,and thus urgently require solutions.This paper reviews the history of research on the deformation monitoring of flight vehicles.It examines various aspects of OFS-based deformation monitoring including the main varieties of OFS technology,technical advantages and disadvantages,suitability in aerospace applications,deformation reconstruction algorithms,and typical applications.This paper points out the key unresolved problems and the main evolution paradigms of engineering applications.It further discusses future development directions from the perspectives of an evolution paradigm,standardization,new materials,intelligentization,and collaboration.

APPLICATION OF REMOTE SENSING TECHNOLOGY TO POPULATION ESTIMATION

This paper attempts to explore a new avenue of urban small-regional population estimation by remote sensing technology, creatively and comprehensively for the first time using a residence count method, area (density) method and model method, incorporating the application experience of American scholars in the light of the state of our country. Firstly, the author proposes theoretical basis for population estimation by remote sensing, on the basis of analysing and evaluating the history and state quo of application of methods of population estimation by remote sensing. Secondly, two original types of mathematical models of population estimation are developed on the basis of remote sensing data, taking Tianjin City as an example. By both of the mathematical models the regional population may be estimated from remote sensing variable values with high accuracy. The number of the independent variables in the latter model is somewhat smaller and the collection of remote sensing data is somewhat easier, but the deviation is a little larger. Finally, some viewpoints on the principled problems about the practical application of remote sensing to population estimation are put forward.

Thermal integrity profiling of cast-in-situ piles in sand using fiber-optic distributed temperature sensing

Defects in cast-in-situ piles have an adverse impact on load transfer at the pile‒soil interface and pile bearing capacity. In recent years, thermal integrity profiling (TIP) has been developed to measure temperature profiles of cast-in-situ piles, enabling the detection of structural defects or anomalies at the early stage of construction. However, using this integrity testing method to evaluate potential defects in cast-in-situ piles requires a comprehensive understanding of the mechanism of hydration heat transfer from piles to surrounding soils. In this study, small-scale model tests were conducted in laboratory to investigate the performance of TIP in detecting pile integrity. Fiber-optic distributed temperature sensing (DTS) technology was used to monitor detailed temperature variations along model piles in sand. Additionally, sensors were installed in sand to measure water content and matric suction. An interpretation method against available DTS-based thermal profiles was proposed to reveal the potential defective regions. It shows that the temperature difference between normal and defective piles is more obvious in wet sand. In addition, there is a critical zone of water migration in sand due to the water absorption behavior of cement and temperature transfer-induced water migration in the early-age concrete setting. These findings could provide important insight into the improvement of the TIP testing method for field applications.

Research on the evolution law of permafrost under the influence of urbanization based on remote sensing technology

The permafrost of Mohe County and its suburbs in the Daxing′an Mountains has been influenced by the urbanization.Remote sensing,GIS technology and numerical simulation was used to study the temperature variations of permafrost with the changes in surface vegetation that cover Mohe County and suburban areas,and the law of permafrost degradation on the study area was analyzed.The research results show that the urban area of the study area increased 114.42%from 2000 to 2016,and the urbanization process is continuing to accelerate.The Normalized Difference Vegetation Index map of 2017 in Mohe County and its suburbs was studied and the maximum proportion of vegetation coverage was different in the four seasons.The numerical calculation model results show that the permafrost temperature change in the study area cyclically fluctuates in a cosine form.The annual variation curve of permafrost temperature gradually decreased and its accompanying phase lag increased with depth.The annual temperature change value with the different depths of the town was greater than the natural ground.The maximum permafrost thawing depths of the town and natural ground were 4.2 m and 2.82 m in 50 a,and the degradation rates of the two permafrost are,respectively,0.88 cm/a and 0.46 cm/a.These results show that urbanization has accelerated the degradation of permafrost.

Application of oxygen-sensing technology to measure seed quality of Ginkgo biloba

Germination tests are currently the most widely used method to evaluate seed quality of Ginkgo biloba L., but they are time-consuming and labor intensive. Oxygen-sensing technology, based on the principle of fluorescence quenching to detect oxygen and assess seed quality was used to rapidly evaluate seed quality of two varieties (Shandong Tancheng 202 and Zhejiang Dafoshou) of G. biloba from five mother plants. Fifteen samples of three vigor levels were produced by accelerated aging treatments. This process was applied in duplicate. A portable oxygen-sensing detector was employed to measure oxygen content during seed germination in a closed system at 25 A degrees C each day until day 14. Four oxygen metabolism indices were calculated: oxygen consumption index, oxygen consumption rate, critical oxygen concentration, and theoretical germination time (T (GT)). Additionally, we tested laboratory germination and field emergence. The results of a one-way analysis of variance and correlation analysis showed that T (GT) was the candidate index to evaluate seed quality of G. biloba. Therefore, the T (GT) value was used to validate the reliability of oxygen-sensing evaluation for Zhejiang Dafoshou seeds kept under four storage conditions. The trend in the change in oxygen metabolism agreed completely agreement with that of seed germination under all storage conditions. The oxygen-sensing test reliably and rapidly assessed seed quality of G. biloba. The germination rate of Zhejiang Dafoshou was accurately predicted by T (GT).

The Assessment of Soil Quality on the Arable Land in Yellow River Delta Combined with Remote Sensing Technology

Soil quality assessment is essential to improve the understanding of soil quality and make proper agricultural practices. However, soil quality assessments are extremely difficult to implement in a large-scale area, since they are time and labor consuming. Remote sensing technique gained more attention in plant and soil information monitoring recently for its high effi-ciency and convenience. But seldom studies tested the applicability of remote sensing techniques before implementing. This study conducted the soil quality assessment in a typical agricultural county in the Yellow River delta (Kenli). We found the soil quality in Kenli was dominantly in the low grade (71.85%), with deficient nutrient (SOM and TN), poor structure (high BD) and high EC. Salinity is the primary limiting factor for soil quality in Kenli, and adjustment of soil salinization through suitable farming practices such as organic fertilizers application, irrigation for leaching, and salt-tolerant crop planting is the key point for soil quality improvement. We obtained the normalized difference vegetation index (NDVI) of the study area by remote sensing technique, and found the high correlation between NDVI and soil quality indicator (SOM, TN and EC) and yield. The NDVI can help to study the soil conditions as a soil quality assessment indicator. More studies about the ap-plication of remote sensing technique on soil quality detecting are expected.

THE LAND USE INVESTIGATION IN TIBET PLATEAU USING REMOTE SENSING TECHNOLOGY

Tibet Plateau is Known as "the Roof of the World" with the area of 1,220,000km^2, which is about 1/8 land area of China. Because of the high elevation, cold climate and it caused difficulties in regional economic planning and land resources management. Since 1985, the land use investigation in Tibet has been carried out, in which the basic data and thematic maps must be obtained and completed at county and township levels, in order to meet the needs of local administrations. In the investigation, remote sensing technology was comprehensively adopted. At present, the investigation in county level had been completed and the compilation is going to be carried out. Due to paying a great attention to studying on a series of key technical problems, the systematic methods of using remote sensing technology in the plateau land use investigation were formed and successfully put into application.

Application of High-Resolution Remote Sensing Technology in Quantitative Study on Coseismic Surface Rupture Zones: An Example of the 2008 M_w7.2 Yutian Earthquake

Objective Nowadays, high-resolution remote sensing technology has brought new changes to surveys of earthquakes, and the quantitative study of seismic faults based on this technology has become a trend in the world(Barzegari et al., 2017). An Mw 7.2 earthquake occurred in Yutian of Xinjiang on the western end of the Altyn Tagh fault on March 21 st, 2008. It is difficult to access this depopulated zone because of the high altitude and only 1–2 months of snowmelt. This study utilized high-resolution

Research on the Agricultural Remote Sensing Image Enhancement Technology Based on the Mixed Entropy Model

Uncertainty is the most important factor affecting the quality of the remote sensing image classification.Aiming at the characteristics ofboth the random and the fuzzy uncertainties in the process of the remote sensing image classification,a method based on the mixed entropy model is proposed to measure these two uncertainties comprehensively,and a multi-scale evaluation index is established.Based on the analysis of the basic principles of the mixed entropy model,a method of using the statistical data of the feature space and the fuzzy classifier to establish the information entropy,the fuzzy entropy and the mixed entropy is proposed.At the same time,on the scale of the pixel and the category,the index of the mixed entropy of the pixel and the mixed entropy of the category are established to evaluate the uncertainty of the classification.

Remote Sensing Technology and Applications for Earthquake Disasters

Disaster warning,disaster estimation and relief depend more and more on the application of space remote sensing technologies,such as those used for optic-camera,hyperspectrum,infrared,SAR,seismo-electromagnet and gravitation measurement.On May 12,2008,a magnitude of 8.

Applications of Satellite Remote Sensing Technology in China's Environmental Monitoring

The environmental conditions in China are still very serious. In the years to come, the mission for environmental treatment and protection, supervision,

Sense of Science and Technology in Product Design

Sense of science and technology has become the trend of modem design, but the commonly acknowledged sense of science and technology is different from science and technology itself. Starting from machine aesthetics and high-tech style, combined with the changing process of the sense of science and technology, it analyzes the causes and related social factors, style characteristics and manifestations of the sense of science and technology, as well as the inherent relationship of multi-angle analysis technology and the sense of science and technology. It illustrates the social value and defects of artistic expression of the sense of science and technology and reflects on the connection and difference between science and technology on the one hand and the sense of science and technology on the other hand.

Remote Sensing Dynamic Monitoring System for Agricultural Disaster in Henan Province Based on Multi-source Satellite Data

Using 3S technology, relying on earth-space three-dimensional agriculture disaster monitoring network, remote sensing monitoring model for agricultural disaster in Henan Province was established, and agricultural disaster monitoring system plat- form of Henan Province based on multi-souroe satellite data was further constructed, which realizes dynamic monitoring of agricultural disasters in Henan Province （drought, flood, snow cover and straw burning）.

A new algorithm of retrieving a petroleum substances absorption coefficient in sea water based on a remote sensing image

Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a remote sensing technology. A remote sensing reflectance is a basic physical parameter in water color remote sensing. Apply it to directly retrieve the absorption coefficient of seawater petroleum substances is of potential advantage. The absorption coefficient of waters containing petroleum [ACWCP, a_o（λ）], consists of the absorption coefficient of pure water [ACPW, a_w（λ）], plankton [ACP, a_（ph）（λ）], colored scraps [ACCS, a_（d,g）（λ）], and petroleum substance [ACPS, a_（oil）（λ）]. Among those, ACCS consists of the absorption coefficient of nonalgal particle [ACNP, a_d（λ）] and colored dissolved organic matter [ACCDOM, a_g（λ）]. For waters containing petroleum, the retrieved ACCS using the existing method is a combination absorption coefficient of ACNP,ACCDOM and ACPA [CAC, a_（d,g,oil）（λ）]. Therefore, the principle question is how to extract ACPS from CAC.Through the analysis of the three proportion tests conducted between the year of 2013 and 2015 and the corresponding remote sensing data, an algorithm of retrieving the absorption coefficient of petroleum substances is proposed based on remote sensing reflectance. First of all, ACPS and CAC are retrieved from the reflectance using the quasi-analytical algorithm（QAA）, with some parameter modified. Secondly, given the fact that the backscatter coefficient [BC, b_（bp）（555）] of total particles at 555 nm can be obtained completely from the reflectance, the relation between BC and ACNP in petroleum contaminated water can be established. As a result, ACNP can be calculated. Then, combining the remote sensing retrieving algorithm of a_g（440）, the method of achieving the spectral slope of the absorption coefficient can be established, from which ACCDOM,can be calculated. Finally, ACPS can be computed as the residual. The accuracy of ACPS based on this algorithm is 86% compared with the in situ measurements.

An operational satellite remote sensing system for ocean fishery

Ocean environmental information is very important to supporting the fishermen in fishing and satellite remote sensing technology can provide it in large scale and in near real-time. Ocean fishery locations are always far away beyond the coverage of the satellite data received by a land-based satellite receiving station. A nice idea is to install the satellite ground station on a fishing boat. When the boat moves to a fishery location, the station can receive the satellite data to cover the fishery areas. One satellite remote sensing system was once installed in a fishing boat and served fishing in the North Pacific fishery areas when the boat stayed there. The system can provide some oceanic environmental charts such as sea surface temperature (SST) and relevant derived products which are in most popular use in fishery industry. The accuracy of SST is the most important and affects the performance of the operational system, which is found to be dissatisfactory. Many factors affect the accuracy of SST and it is difficult to increase the accuracy by SST retrieval algorithms and clouds detection technology. A new technology of temperature error control is developed to detect the abnormity of satellite-measured SST. The performance of the technology is evaluated to change the temperature bias from -3.04 to 0.05 ℃ and the root mean square (RMS) from 5.71 to 1.75℃. It is suitable for employing in an operational satellite-measured SST system and improves the performance of the system in fishery applications. The system has been running for 3 a and proved to be very useful in fishing. It can help to locate the candidates of the fishery areas and monitor the typhoon which is very dangerous to the safety of fishing boats.

The Sensing Principle of FBG and Its Experimental Application in Structure Strengthening Detection

Based on the basic theory of the fiber Bragg grating sensor,a kind of stickup FBG sensor is developed,which is applied in the structure strengthening.With the experiment of the FBG senor and the common electricity sensor stuck on the reinforced structure,the result shows that the FBG sensor not only has a high performance,but also can realize the control on the spot and on the line.

GIScience and remote sensing in natural resource and environmental research:Status quo and future perspectives

Geographic information science(GIScience)and remote sensing have long provided essential data and method-ological support for natural resource challenges and environmental problems research.With increasing advances in information technology,natural resource and environmental science research faces the dual challenges of data and computational intensiveness.Therefore,the role of remote sensing and GIScience in the fields of natural resources and environmental science in this new information era is a key concern of researchers.This study clarifies the definition and frameworks of these two disciplines and discusses their role in natural resource and environmental research.GIScience is the discipline that studies the abstract and formal expressions of the basic concepts and laws of geography,and its research framework mainly consists of geo-modeling,geo-analysis,and geo-computation.Remote sensing is a comprehensive technology that deals with the mechanisms of human ef-fects on the natural ecological environment system by observing the earth surface system.Its main areas include sensors and platforms,information processing and interpretation,and natural resource and environmental appli-cations.GIScience and remote sensing provide data and methodological support for resource and environmental science research.They play essential roles in promoting the development of resource and environmental science and other related technologies.This paper provides forecasts of ten future directions for GIScience and eight future directions for remote sensing,which aim to solve issues related to natural resources and the environment.

Application Advantages of Staring Area Imaging Technology(SAIT) for Microsatellites

The Staring Area Imaging Technology(SAIT) satellite continuously "images" the target over a certain time range, and can realize continuous imaging and multi-angle imaging of the area of interest. It has the characteristics of flexible imaging parameter setting and fast image preprocessing speed, enabling dynamic target detection and tracking, super-resolution, surface 3 D model construction, night-time imaging and many other application tasks. Based on the technical characteristics of the SAIT satellite, this paper analyzes the challenges in satellite development and data processing, focuses on the quasi-realtime application of SAIT satellite data, and looks at the development trend of the SAIT satellite.

Study on the Tin Oxide Sol-Gel Membrane as a pH Sensing Electrode

In this study,tin oxide sensing membrane was derived by sol-gel method and was coated onto indium tin oxide (ITO) glass substrate by spin-coating technique to fabricate a pH sensing electrode.Besides,the morphology of the tin oxide membrane has been discussed through the instrumental analysis.Furthermore,the sensing characteristics of the pH electrode was measured by commercial instrumental amplifier as the readout circuit.Owing to the sol-gel method has many advantages such as easy fabrication of gel solution,ability to dope other materials without any expensive fabricating equipment.Hence,it is suitable for the mass production of a disposable sensor.