Laser self-mixing interference fibre sensor

Fibre sensors exhibit a number of advantages over other sensors such as high sensitivity, electric insulation, corrosion resistance, interference rejection and so on. And laser self-mixing interference can accurately detect the phase difference of feedback light. In this paper, a novel laser self-mixing interference fibre sensor that combines the advantages of fibre sensors with those of laser self-mixing interference is presented. Experimental configurations are set up to study the relationship between laser power output and phase of laser feedback light when the fibre trembles or when the fibre is stretched or pressed. The theoretical analysis of pressure sensors based on laser self-mixing interference is indicated to accord with the experimental results.

PASSIVE OPTICAL FIBRE SENSOR FOR REB MEASUREMENT

The paper systematically describes the theoretical research on Cerenkov effect of REB in optical fibres. The analytical expressions for light generation ,collection efficiency ,electron incident angle .the Cerenkov radiation sensitivity of the optical fibre to the current density of the REB stream.and the response of the sensitivity to both electron energy and electron incident angles are given. The typical sensor system for REB measurement is presented. The dynamic range and bandwidth are quantitatively analyzed. The calculation results are illustrated,

Design of a Reflective Intensity Optical Fibre Bundle Displacement Sensor

Optical fibre sensor has the advantages of small size,light weight,anti⁃electromagnetic interference,and high measurement accuracy,which has important applications in research and industrial production.To design an optical fibre displacement sensor(OFBDS)with simple structure and high measurement accuracy,the unified model of the commonly used OFBDS structures was proposed and the feasibility of the intensity⁃modulation of multi⁃structural optical fibre bundles was analysed based on the arrangement characteristics of the fibre bundle end⁃face.The intensity⁃modulation characteristic of different fibre bundles was analysed,and the single coil coaxial fibre bundle was chosen as the fibre probe in this study.The sensor hardware system was designed.Lastly,the calibration experiment,temperature interference experiment,changes of measured plane surface area,and the dynamic experiment were conducted.Results showed that the sensor linear measurement range was about 3 mm,and the sensor system had excellent static and dynamic characteristics.

Signal Processing for Fibre-optic Distributed Sensing Techniques Employing Brillouin Scattering

As fibre optic distributed scattering sensing systems are providing innovative solutions for the monitoring of large structures,Brillouin-based distributed scattering sensing techniques represent a new physical approach for structures health monitoring,which seems extremely promising and is receiving most attentions.This paper comprehensively presents some methods of signal interrogation for fibre optic Brillouin-based distributed scattering sensing technology,especially establishes an accurate Pseudo-Voigt model of Brillouin gain spectrum and gives some results on spectrum analysis and data processing.

Fibre Optic Protection System for Concrete Structures

The design concepts, modelling and implementation of various fibre optic sensor protection systems for development in concrete structures were investigated. Design concepts and on-site requirements for surface-mounted and embedded optical fibre sensor in concrete were addressed. Finite element （FE） modelling of selected sensor protection systems in strain-transfer efficiency from the structure to the sensing region was also studied. And experimental validation of specified sensor protection system was reported. Results obtained indicate that the protection system for the sensors performs adequately in concrete environment and there is very good correlation between results obtained by the protected fibre optic sensors and conventional electrical resistance strain gauges.

Implementation of Phase Generated Carrier Technique for FBG Laser Sensor Multiplexed System Based on Compact RIO

This paper presents the fundamental technique of phase generated carrier （PGC） and its realization on compact reconfigurable input and output （RIO） which adopts real-time and field programmable grate array （FPGA） techniques. Improvement of the PGC technique is also introduced by using peak-to-peak value detection method to reduce the influence of variation of the light intensity. A four-element fibre Bragg gratings （FBG） laser sensor system is conducted in the experiment and the demodulated results demonstrate correlation coefficient as high as 0.995 with the reference signal and the dynamic range to be 120dB@63Hz.

Ultrahigh-speed distributed Brillouin reflectometry

Optical fibre sensors based on Brillouin scattering have been vigorously studied in the context of structural health monitoring on account of their capacity for distributed strain and temperature measurements.However,real-time distributed strain measurement has been achieved only for two-end-access systems;such systems reduce the degree of freedom in embedding the sensors into structures,and furthermore render the measurement no longer feasible when extremely high loss or breakage occurs at a point along the sensing fibre.Here,we demonstrate real-time distributed measurement with an intrinsically one-end-access reflectometry configuration by using a correlation-domain technique.In this method,the Brillouin gain spectrum is obtained at high speed using a voltage-controlled oscillator,and the Brillouin frequency shift is converted into a phase delay of a synchronous sinusoidal waveform;the phase delay is subsequently converted into a voltage,which can be directly measured.When a single-point measurement is performed at an arbitrary position,a strain sampling rate of up to 100 kHz is experimentally verified by detecting locally applied dynamic strain at 1 kHz.When distributed measurements are performed at 100 points with 10 times averaging,a repetition rate of 100 Hz is verified by tracking a mechanical wave propagating along the fibre.Some drawbacks of this ultrahigh-speed configuration,including the reduced measurement accuracy,lowered spatial resolution and limited strain dynamic range,are also discussed.