Oscillation of Dzyaloshinskii–Moriya interaction driven by weak electric fields

Dzyaloshinskii–Moriya interaction(DMI) is under extensive investigation considering its crucial status in chiral magnetic orders, such as Néel-type domain wall(DW) and skyrmions. It has been reported that the interfacial DMI originating from Rashba spin–orbit coupling(SOC) can be linearly tuned with strong external electric fields. In this work, we experimentally demonstrate that the strength of DMI exhibits rapid fluctuations, ranging from 10% to 30% of its original value, as a function of applied electric fields in Pt/Co/MgO heterostructures within the small field regime(< 10-2V/nm). Brillouin light scattering(BLS) experiments have been performed to measure DMI, and first-principles calculations show agreement with this observation, which can be explained by the variation in orbital hybridization at the Co/MgO interface in response to the weak electric fields. Our results on voltage control of DMI(VCDMI) suggest that research related to the voltage control of magnetic anisotropy for spin–orbit torque or the motion control of skyrmions might also have to consider the role of the external electric field on DMI as small voltages are generally used for the magnetoresistance detection.

Review of Field Weakening Control Strategies of Permanent Magnet Synchronous Motors

Due to high power density,high efficiency,and accurate control performance,permanent magnet synchronous motors(PMSMs)have been widely adopted in equipment manufacturing and energy transformation fields.To expand the speed range under finite DC-bus voltage,extensive research on field weakening(FW)control strategies has been conducted.This paper summarizes the major FW control strategies of PMSMs,which are categorized into calculation-based methods,voltage closed-loop control methods,and model predictive control related methods.The existing strategies are analyzed and compared according to performance,robustness,and execution difficulty,which can facilitate the implementation of FW control.

On the Bacteriostatic Activity of Bacillus subtilis and Pyraclostrobin as Well as Their Mixtures to Grape Anthracnose and the Field Disease Control Efficiency

[Objective] To screen out the biological compound bactericides for grape anthracnose, reduce and replace the use of chemical pesticide. [Methods] The de- termination on the indoor bacteriostatic activity of different proportions of Bacillus subtilis and pyraclostrobin to grape anthracnose was carried out, and mycelial growth rate method was adopted to determine the toxicity of Bacillus subtilis and pyraclostrobin as well as their 5 mixtures to grape anthracnose. [Results] The EC50 of Bacillus subtilis and pyraclostrobin as well as their mixture combinations of 1：1, 1：2, 1：3, 1：4 and 1：5 to grape anthracnose were respectively 1.969 8, 1.527 4, 1.373 2, 1.294 8 and 1.247 3 μg/ml; the synergistic coefficients （SR） of the 5 mix- ture combinations to grape anthracnose were 1.70, 1.25, 1.13, 1.12 and 1.12, re- spectively, in which the synergistic effect of 1：1 was the largest. The indoor biologi- cal activity of pyraclostrobin（EC50 was 1.054 0μg/ml） was higher than that of Bacil- lus subtilis（EC50 was 15.017 5 μg/ml）. 50 d after the agentia（before the harvesting）, the investigation results showed that 1 000-fold dilution, 1 500-fold dilution and 2 000- fold dilution as well as each single dosage of 20% pyraclostrobin .200×10^8 cfu/g Bacillus subtili wettable powder all had better control efficiency to grape anthracnose after fruit setting and before bagging, in which the treatments of high concentration and middle concentration were higher than the treatments of low concentration and two single dosages： the highest control efficiency of high concentration was 90.03%, which was higher than all other treatments; the control efficiency of middle concen- tration was 87.01%, which was higher than that of low concentration and each sin- gle dosage; the control efficiency of low concentration was 84.11%, which was high- er than 1 000-fold dilution of 1 000×10^8 cfu/g Bacillus subti/i wettable powder （the control efficiency was 64.60%） and 2 000-fold dilution of 250 g/L Bacillus subti/i wettable powder （the control efficiency was 81.07%）. In addition, each treatment al- so had better control efficiency to other cluster diseases, such as white rot, etc., and the control efficiency was almost the same as that of anthracnose. [Conclusion] It was suggested that the prevention concentration of 20% pyraclostrobin .200×10^8 cfu/g Bacillus subtili wettable powder to grape anthracnose after fruit setting and before bagging was 1 000-fold - 2 000-fold dilution.

Genetic algorithm tuned PI controller on PMSM simplified vector control

A simple control structure in servo system is occasionally needed for simple industrial application which precise and high control performance is not exessively important so that the cost production can be reduced efficiently. Simplified vector control, which has simple control structure, is utilized as the permanent magnet synchronous motor control algorithm and genetic algorithm is used to tune three PI controllers used in simplified vector control. The control performance is obtained from simulation and investigated to verify the feasibility of the algorithm to be applied in the real application. Simulation results show that the speed and torque responses of the system in both continuous time and discrete time can achieve good performances. Furthermore, simplified vector control combined with genetic algorithm has a similar perfofmance with conventional field oriented control algorithm and possible to be realized into the real simple application in the future.

Research on Integration of Coal Mine Moni-toring and Control System with Field Bus Control System

According to the construction of current coal mine monitoring and control systems in China, the paper proposes three kinds of applicable schemes of integrating PLC and DCS systems with field bus technology to digitize the system and to improve the flexibility and extent of the system. Essentially, the paper introduces the integration of FCS on I/O layers. Based on a real coal mine safety-monitoring and control system applied with a CAN field bus, the major technology of system relays and extensions is discussed. We believe that one of the most applicable methods is currently replacing the connection between function-stations and field-sensors with a CAN bus on I/0 layers for system integration.

Determination and evaluation on field control efficacy of Trichogramma dendrolimi against Ostrinia furnacalis

The results of evaluation on field control efficacy of Trichogramma dendrolimi against Ostrinia furnacalis showed that the correction rates of Ostrinia furnacalis egg mass parasitism were 71.75% and 73.57%,the average control effect were 65.85% and 70.24%,the restoration yield loss rates were 6.78% and 7.97%,input-output ratio at 1:27.8 and 1:33.5 in Longjiang county of Heilongjiang province in 2009 and 2010,respectively.The technology is a integration of advanced,practical,environmental safety,effective biocontrol measures,embodies the "public plant protection,green plant protection" fully,has significant economic,social and ecological benefits.

Capillary Electrophoretic Separation of Proteins under the Control of Radial Electric Field

Separation of basic proteins was performed using a homemade field-modulated capillary electrophoresis system. The resolution. elution and even wall adsorption can be regulated by ad-lusting the radial rather than axial voltage applied. Selection of running buffer and pH was found to be critical.

Control Effect of Sex Pherom one Lure against the Asian Corn Borer( Ostrinia furnacalis) in Field

We studied the trapping effects on Ostrinia furnacalis from the aspects of different hanging heights and different color traps. The results suggested that the hanging height of 1.5 - 2.0 m received a better trapping effect, but trap color had little impact on trapping effect. The sex pheromone traps at different densities were placed in corn field. The results showed that sex pheromone lure could trap adult O. furnacalis, and it was feasible to apply sex pheromone in short term fore- cast. Meanwhile, it reduced the number of larvae and eggs, thereby reducing the damage of O. furnacalis. The lure number of 10 per hm2 was more appropriate, which could result in increasing yield of 8.61% compared with control

Upgraded Poloidal Field Control System for HT-7 Tokamak

This paper reviews how we have designed the upgraded poloidal field control system on HT-7 superconducting Tokmak by applying advanced computer technologies and Multivariable decoupling control theory. This paper emphasizes on designing the method of the control system,including system components and their functions.

Field Control Effects and Crop Safety Assessment of Triazole Fungicides on Apple Rust

In order to provide a reference basis for efficient prevention and control of apple rust,apple rust(Gymnosporangium yamadai)was used as the test material,the field control effects of six triazole fungicides with different concentrations and different application times on apple rust,and the safety of application in different periods on the crop were investigated in field trials.The results showed that the control effect and safety of myclobutanil were excellent.In the prevention test,the effects of myclobutanil 40%EC 2000 times and 4000 times dilutions in protecting apple leaves from G.yamadai infection reached more than 98%at 10 d after the second spraying in the fruitlet stage,and in the treatment test,the control effects of inhibiting the spread of leaf lesions were 90.89%and 87.17%at 16 d after the fourth spraying in the fruit expansion stage,respectively.The results of the crop safety test showed that when applying the triazole fungicides with different concentrations from the red bud stage to the fruit expansion stage of apple trees,there were no adverse effects on the leaves,branches,flowers and fruit,as well as no rust or deformity on the fruit surface.When spraying the fungicides from the red bud stage to the fruit expansion stage,except that the single fruit weights in the treatment of the 10%difenoconazole DC 2000 times and myclobutanil 40%EC 4000 times dilutions were reduced without a significant difference from the control,and the values of other treatments were all reduced by more than 9%compared with the control.When applying the fungicides during the fruit expansion period,none of the tested fungicide treatments had a significant effect on the fruit growth.

Research of CAN Bus in the Coal Mine Field Data Transmission based on Reliability

Under the current situation, China＇ s rapid economic development, various new science, emerge in an endless stream of new technology, under the environment of coal mine industry, seize the opportunity, by virtue of its original advantages, coupled with technology introduction and innovation consciousness of the play, ushered in a new period of development, into the modern coal mining era. CAN bus technology is a new technology which has the typical data transmission in coal mining, the introduction of a certain degree of CAN bus technology, not only improve the efficiency of data transmission, at the same time, in terms of reliability and greatly enhance. In this paper, to a certain extent on the introduction of the CAN bus technology, and on this basis, based on the CAN bus in the coal mine field data transmission reliability research and analysis

Controlling Three-Dimensional Electron-Electron Correlation via Elliptically Polarized Intense Laser Field

The three-dimensional electron-electron correlation in an elliptically polarized laser field is investigated based on a semiclassical model. Asymmetry parameter α of the correlated electron momentum distribution is used to quantitatively describe the electron-electron correlation. The dependence of α on elliptieity e is totally different in three directions. For the z direction （maJor polarization direction）, α first increases and reaches a maximum at ε = 0.275, then it decreases quickly. For the y direction in which the laser field is always absent, the ellipticity has a minor effect, and the asymmetry parameter fluctuates around α = -0.15. However, for the x direction （minor polarization direction）, α increases monotonously with ellipticity though starts from the same value as in the y direction when ε = 0. The behavior of α in the x direction actually indicates a transformation from the Coulomb interaction dominated correlation to the laser field dominated correlation. Therefore, our work provides an efficient way to control the three-dimensional electron electron correlation via an elliptically polarized intense laser field.

Controlling the Goos-H?nchen Shift via Incoherent Pumping Field and Electron Tunneling in the Triple Coupled InGaAs/GaAs Quantum Dots

We study the controlling of the Goos-Hanchen （GH） shifts in reflected and transmitted light beams in the triple coupled InGaAs/GaAs quantum dot （QD） nanostructures with electron tunneling and incoherent pumping field. It is shown that the lateral shift can become either large negative or large positive, which can be controlled by the electron tunneling and the rate of incoherent pump field in different incident angles. It is also demonstrated that the properties of the OH shifts are strongly dependent on the probe absorption beam of the intracavity medium due to the switching from superluminal light propagation to subluminal behavior or vice versa. Our suggested system can be considered as a new theoretical method for developing a new nano-optoelectronic sensor.

TEMPERATURE FIELD CONTROL PRINCIPLE AND CONTROL MODELS FOR CRYOGENIC MACHINING SYSTEM

Cryogenic machining is a new technology which makes use of the special mechanicalprcperties of niaterials in a cryogenic or a 'super cold' state for machining. The control of acryogenic machining system(CMS)is one of the key problems which need to be solved for practi-cal cryogenic machining A temperature field control principle is presented which calculates theheat source temperature in the light of the tool temperature field information, and a control mod-el of three-dimensional dynamic temperature field for CMS is established, and the boundary con-ditions and the heat source of temperature field in orthogonal cutting are discussed. Based on theinvestigation of the control feature and technique. a prototype system for controlling CMS is crea-ted.

Control Effects of Bacillus subtilis DJ-6 and Pyraclostrobin Alone and in Combination Against Fusarium oxysporum

[Objective] This study was conducted to screen a synergistic biological fungicide complex to control Fusarium wilt, reducing the use of chemical pesticides. [Method] The inhibitory effects of Bacil us subtilis DJ-6 and pyraclostrobin alone or in combination at five ratios against Fusarium oxysporum were detected by mea-suring mycelium growth rate in laboratory tests. The growth promotion and disease control effect of combined or single use of 20% pyraclostrobin and 2 ×1011 cfu/g B. subtilis DJ-6 WP at 1∶1 000, 1∶2 000 and 1∶3 000 dilutions were detected in field trials. [Result] The EC50 values of combined use of B. subtilis DJ-6 and pyra-clostrobin at ratios of 1∶1, 1∶2, 1∶3, 1∶4 and 1∶5 against F. oxysporum were 5.311 5, 4.008 6, 3.570 6, 3.350 9 and 3.218 9 μg/ml, with the synergistic ratios （SR） of 2.28, 1.77, 1.53, 1.64, 1.11, among which the synergetic effect at 1∶1 was the best. The fungicidal activity of pyraclostrobin was greater than that of B. subtilis DJ-6 in laboratory tests. Field trials revealed that al the 1∶1 000, 1∶2 000 and 1∶3 000 dilu-tions of 20% pyraclostrobin·2×1011 cfu/g B. subtilis DJ-6 WP in combination, 1∶1 000 dilution of 1 ×1012 cfu/g B. subtilis DJ-6 WP and 1∶2 000 dilution of 250 g/L pyra-clostrobin EC promoted the growth of strawberry by increasing plant height, leaf petiole, leaf blade area and stem diameter. Among them, the treatments with 1∶1 000 and 1∶2 000 of 20% pyraclostrobin · 2×1011 cfu/g B. subtilis DJ-6 WP in combina-tion had better effects than other treatments. The control effects of al the treat-ments were measured 30 and 80 d after fungicide application. The control effects of 1∶1 000 dilution of 20% pyraclostrobin and 2×1011 cfu/g B. subtilis DJ-6 in combina-tion were up to 100% and 93.11%, which were higher than those in al other treat-ments. The second highest control effects were found in the treatment with 1∶ 2 000 dilution of 20% pyraclostrobin and 2×1011 cfu/g B. subtilis DJ-6 in combination, they were 92.49% and 86.49%, higher than those in other treatments except the 1∶1 000 dilution of 20% pyraclostrobin and 2 ×1011 cfu/g B. subtilis DJ-6 in combination. The control effects of 1∶3 000 dilution of 20% pyraclostrobin and 2×1011 cfu/g B. subtilis DJ-6 in combination were 82.61% and 72.42%, higher than those in treatment with 1∶1 000 dilution of 1×1012 cfu/g B. subtilis DJ-6 WP, but lower than those in treat-ment with 1∶2 000 dilution of 25% pyraclostrobin EC. [Conclusion] Al the results re-vealed that the combination use of 20% pyraclostrobin and 2 ×1011 cfu/g B. subtilis DJ-6 WP at 1∶1 000 to 1∶2 000 dilution had better control effect against strawberry Fusarium wilt.

Identification of Strawberry Anthracnose Pathogens and Screening of Germicides

[Objective] This study aimed to identify strawberry anthracnose pathogens and screen appropriate germicides. [Method] Strawberry anthracnose pathogens in Jurong City of Jiangsu Province were isolated and identified. The toxicities of sever-al germicides to Col etotrichum fragariae were determined with indoor mycelial growth inhibition assay. Field control test was preformed to further verify the control efficacy of germicides. [Result] The isolated strawberry anthracnose pathogenic strains were identified as C. gloeosporioide from genus Col etotrichum of subphylum Deuteromycotina. Prochloraz, pyrazole Kresoxim and hexaconazole al exhibited good indoor control effects; 25% pyrazole Kresoxim EC2000-fold solution, 24% azoxys-trobin＆#183;hexaconazole （azoxystrobin∶hexaconazole=1∶2） SC1500-fold solution and 25%prochloraz EC1000-fold solution al exhibited significant field control efficacy. [Con-clusion] The study provides reference for the alternate use of germicides in actual production.

A Preliminary Study on Control Efficiency of New Nicotine Biopesticides against Pomegranate Aphids

In this study, toxicity and control efficiency of three nicotine biopesticides against pomegranate aphids were determined via indoor toxicity test and field effica- cy test, aiming at screening the appropriate reagent for prevention and control of pomegranate aphids. The results of indoor toxicity test showed that LC^o of reagent 1, reagent 2 and reagent 3 reached 10 270, 12 810 and 13 040 mg/L, respectively. The results of field efficacy test showed that control efficacy of reagent 1, reagent 2 and reagent 3 reached 60.52%, 34.60% and 46.99%, respectively. Overall, reagent 1 （91% ultrafine powder of tobacco leaves, 3% silicone oil, 2% sasangua cake, 2% emulsifier, 2% ascorbic acid） exhibited the highest control efficiency against pomegranate aphids, which can be further popularized and utilized.

Driving and Braking Control of PM Synchronous Motor Based on Low-resolution Hall Sensor for Battery Electric Vehicle

Resolvers are normally employed for rotor positioning in motors for electric vehicles, but resolvers are expensive and vulnerable to vibrations. Hall sensors have the advantages of low cost and high reliability, but the positioning accuracy is low. Motors with Hall sensors are typically controlled by six-step commutation algorithm, which brings high torque ripple. This paper studies the high-performance driving and braking control of the in-wheel permanent magnetic synchronous motor （PMSM） based on low-resolution Hall sensors. Field oriented control （FOC） based on Hall-effect sensors is developed to reduce the torque ripple. The positioning accuracy of the Hall sensors is improved by interpolation between two consecutive Hall signals using the estimated motor speed. The position error from the misalignment of the Hall sensors is compensated by the precise calibration of Hall transition timing. The braking control algorithms based on six-step commutation and FOC are studied. Two variants of the six-step commutation braking control, namely, half-bridge commutation and full-bridge commutation, are discussed and compared, which shows that the full-bridge commutation could better explore the potential of the back electro-motive forces （EMF）, thus can deliver higher efficiency and smaller current ripple. The FOC braking is analyzed with the phasor diagrams. At a given motor speed, the motor turns from the regenerative braking mode into the plug braking mode if the braking torque exceeds a certain limit, which is proportional to the motor speed. Tests in the dynamometer show that a smooth control could be realized by FOC driving control and the highest efficiency and the smallest current ripple could be achieved by FOC braking control, compared to six-step commutation braking control. Therefore, FOC braking is selected as the braking control algorithm for electric vehicles. The proposed research ensures a good motor control performance while maintaining low cost and high reliability.

PSO Based Controlled Six-phase Grid Connected Induction Generator for Wind Energy Generation

This paper deals a detailed performance investigation of asymmetrical six-phase grid connected induction generator(GCIG)in two proposed configurations in variable speed operation.During the system development,regulation of DC-link voltage has been proposed using particle swarm optimization(PSO)based PI controller,ensuring the power flow to utility grid through back to back converters.The closed loop operation of asymmetrical six-phase GCIG using indirect field oriented control in different configurations has been carried out in Matlab/Simulink environment.Analytical results have been verified using real time test results on virtual platform of Typhoon HIL supported with some experimental validation.

Torque-based Optimal Acceleration Control for Electric Vehicle

The existing research of the acceleration control mainly focuses on an optimization of the velocity trajectory with respect to a criterion formulation that weights acceleration time and fuel consumption. The minimum-fuel acceleration problem in conventional vehicle has been solved by Pontryagin＇s maximum principle and dynamic programming algorithm, respectively. The acceleration control with minimum energy consumption for battery electric vehicle（EV） has not been reported. In this paper, the permanent magnet synchronous motor（PMSM） is controlled by the field oriented control（FOC） method and the electric drive system for the EV（including the PMSM, the inverter and the battery） is modeled to favor over a detailed consumption map. The analytical algorithm is proposed to analyze the optimal acceleration control and the optimal torque versus speed curve in the acceleration process is obtained. Considering the acceleration time, a penalty function is introduced to realize a fast vehicle speed tracking. The optimal acceleration control is also addressed with dynamic programming（DP）. This method can solve the optimal acceleration problem with precise time constraint, but it consumes a large amount of computation time. The EV used in simulation and experiment is a four-wheel hub motor drive electric vehicle. The simulation and experimental results show that the required battery energy has little difference between the acceleration control solved by analytical algorithm and that solved by DP, and is greatly reduced comparing with the constant pedal opening acceleration. The proposed analytical and DP algorithms can minimize the energy consumption in EV＇s acceleration process and the analytical algorithm is easy to be implemented in real-time control.