Effects of direct current electric field on corrosion behaviour of copper, Cl- ion migration behaviour and dendrites growth under thin electrolyte layer

Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.

Grain refinement of pure aluminum by direct current pulsed magnetic field and inoculation

The combined effects of direct current pulsed magnetic field （DC-PMF） and inoculation on pure aluminum were investigated, the grain refinement behavior of DC-PMF and inoculation was discussed. The experimental results indicate that the solidification micro structure of pure aluminum can be greatly refined under DC-PMF. Refinement of pure aluminum is attributed to electromagnetic undercooling and forced convection caused by DC-PMF. With single DC-PMF, the grain size in the equiaxed zone is uneven. However, under DC-PMF, by adding 0.05% （mass fraction） Al5Ti-B, the grain size of the sample is smaller, and the size distribution is more uniform than that of single DC-PMF. Furthermore, under the combination of DC-PMF and inoculation, with the increase of output current, the grain size is further reduced. When the output current increases to 100 A, the average grain size can decrease to 113 μn.

Surface current field and seasonal variability in the Kuroshio and adjacent regions derived from satellite-tracked drifter data

The muhiyear averaged surface current field and seasonal variability in the Kuroshio and adjacent regions are studied. The data used are trajectories and （1/4） ° latitude by （1/4） ° longitude mean currents derived from 323 Argos drifters deployed by Chinese institutions and world ocean circulation experiment from 1979 to 2003. The results show that the Kuroshio surface path adapts well to the western boundary topography and exhibits six great turnings. The branching occurs frequently near anticyclonic turnings rather than near cyclonic ones. In the Luzon Strait, the surface water intrusion into the South China Sea occurs only in fall and winter. The Kuroshio surface path east of Taiwan, China appears nearly as straight lines in summer, fall, and winter, when anticyclonic eddies coexist on its right side; while the path may cyclonically turning in spring when no eddy exists. The Kuroshio intrusion northeast of Taiwan often occurs in fall and winter, but not in summer. The running direction, width and velocity of the middle segment of the Kuroshio surface currents in the East China Sea vary seasonally. The northward intrusion of the Kuroshio surface water southwest of Kyushu occurs in spring and fall, but not in summer. The northmost position of the Kuroshio surface path southwest of Kyushu occurs in fall, but never goes beyond 31 °N. The northward surface current east of the Ryukyu Islands exists only along Okinawa-Amami Islands from spring to fall. In particular, it appears as an arm of an anti- cyclonic eddy in fall.

2-D Current Field Numerical Simulation Integrating Yangtze Estuary with Hangzhou Bay

In this paper, integrating the Yangtze Estuary with the Hangzhou Bay, a 2-D velocity field model is established. In the model, fine self-adaptive grids are employed to adapt to the complicated coastal shape. The hydrodynamic equations satisfied by two contravariant components of velocity vector and surface elevation in non-orthogonal curvilinear coordinates are used. In each momentum equation the coefficients before the two partial derivatives of surface elevation with respect to variables of alternative direction coordinates have different orders of magnitude, i. e., the derivative with the larger coefficient may play a more important role than that with the smaller one. With this advantage, the ADI scheme can be easily employed. The hydrodynamic factors include tidal current, river runoff and wind-induced current. In terms of tidal current, seven main constituents in the area are considered in the open boundaries. The verifications of surface elevation process and current velocity process in the spring tide and in the neap tide show that the model can preferably reflect current fields in the area. Through the simulation of Lagrangian residual current fields in summer and in winter, the paths of the exchange of water and sediment between the Yangtze Estuary and the Hangzhou Bay are elementarily discussed.

Single Bubble Behavior in Direct Current Electric Field

The investigation on bubble behavior in electric field helps to analyze the mechanism of electric enhancement of boiling heat transfer. Experiments were performed to investigate the bubble deformation in direct current （DC） electric field with bubbles attached to the orifice. The air bubbles were slowly generated in the transformer oil pool at different orifices, so that the effect of flow on bubble shape was eliminated. The results showed that the bubbles were elongated and the departure volume decreased when the electric field was intensified. The major and minor axes, aspect ratio and departure volume increased with increasing the orifice diameter. Both the electric field and orifice size have great influence on bubble behavior. The bubble deformation was also simulated to compare with the experimental results. The numerical and experimental data qualitatively agree with each other.

Measurements of ocean wave and current field using dual polarized X-band radar

A new ocean wave and sea surface current monitoring system with horizontally-(HH) and vertically-(VV) polarized X-band radar was developed.Two experiments into the use of the radar system were carried out at two sites,respectively,for calibration process in Zhangzi Island of the Yellow Sea,and for validation in the Yellow Sea and South China Sea.Ocean wave parameters and sea surface current velocities were retrieved from the dual polarized radar image sequences based on an inverse method.The results obtained from dual-polarized radar data sets acquired in Zhangzi Island are compared with those from an ocean directional buoy.The results show that ocean wave parameters and sea surface current velocities retrieved from radar image sets are in a good agreement with those observed by the buoy.In particular,it has been found that the vertically-polarized radar is better than the horizontally-polarized radar in retrieving ocean wave parameters,especially in detecting the significant wave height below 1.0 m.

Current horizontal strain field in Chinese mainland derived from GPS data

The current crustal horizontal strain field is given in the paper based on the horizontal movement rates obtained from about 400 GPS stations located in Chinese mainland and its surrounding areas. The results show: a) The horizontal strain in Chinese mainland is strong in the west and weak in the east and the shear strain is larger than the normal strain (absolute magnitude). The general strain magnitude is 10-8/a and in local regions is 10-7/a, but the strain distribution is not homogeneous; b) The regions with the most significant NS-trending strains are the Himalayas belt along the western segment of Chinese southern boundary, the segment of 36N~42N along the western boundary and the northern margin of Qaidam block; c) The EW-trending strain variation along the western margin is the maximum and it is characterized by the alternatively positive and negative variations from the west to the east; d) The regions with larger magnitudes of REN (NE-trending shear strain) and Rmax (maximum shear strain) are Himalayas belt, the segment of 36N~42N along the western boundary, the western part of Qaidam block, Sichuan-Yunnan (Chuan-Dian) rhombic block and the border area of Alxa, Qilian and Tarim blocks; e) The surrounding area of Qinghai-Xizang (Qingzang) block is mainly superfacial contraction and its interior is basically superfacial expansion. The area to its north is mainly superfacial contraction with the maximum magnitude along the western boundary and the minimum magnitude in the eastern part (except Yanshan tectonic zone); f) In the west of the western part, the principal compressive strain is in the SN direction and the principal tensile strain is in the EW direction, while in the eastern margin area of the western part, the principal compressive strain is proximate EW and the principal tensile strain is about SN. The principal strain direction of Chuan-Dian rhombic block has changed greatly. In the northern part, it is compression in the EW and tension in the SN, while in the southern part, it is just the opposite; g) The strain pattern in Chinese mainland might be the integration of block mode and successive deformation mode. In addition, the shear strain might be the small-scale dominant strain. Such a result might be resulted from the collision of Indian plate and the boundaries coupling, and it is also closely related to the motion of deep-seated matters and the physical nature of crustal medium. Therefore, it should be noted that since the GPS stations are not homogenous in spatial distribution, the obtained strain fields and the scales of the strain should be different.

Inverse problem of pulsed eddy current field of ferromagnetic plates

To determine the wall thickness, conductivity and permeability of a ferromagnetic plate, an inverse problem is established with measured values and calculated values of time-domain induced voltage in pulsed eddy current testing on the plate. From time-domain analytical expressions of the partial derivatives of induced voltage with respect to parameters,it is deduced that the partial derivatives are approximately linearly dependent. Then the constraints of these parameters are obtained by solving a partial linear differential equation. It is indicated that only the product of conductivity and wall thickness, and the product of relative permeability and wall thickness can be determined accurately through the inverse problem with time-domain induced voltage. In the practical testing, supposing the conductivity of the ferromagnetic plate under test is a fixed value, and then the relative variation of wall thickness between two testing points can be calculated via the ratio of the corresponding inversion results of the product of conductivity and wall thickness. Finally, this method for wall thickness measurement is verified by the experiment results of a carbon steel plate.

NUMERICAL ANALYSIS AND EXPERI-MENT OF UNSTEADY THERMAL FIELD OF ROTOR PLATE FOR EDDY CURRENT RETARDER

The physical model based on heat transfer theory and virtual boundary method for analyzing unsteady thermal field of rotor plate for eddy current retarder used in automobile is established and boundary conditions are also defined. The finite element governing equation is derived by Galerkin method. The time differential item is discrete based on Galerkin format that is stable at any condition. And a new style of varying time step method is used in iteration process. The thermal field on the rotor plate at the radial and axle directions is analyzed and varying temperature at appointed points on two side-surfaces is measured. The testing and analytical data are uniform approximately. Finite element method can be used for estimating thermal field of the rotor plate at initial design stage of eddy current retarder.

3D Eddy Current and Temperature Field Analysis of Large Hydro-generators in Leading Phase Operations

As a common practice,a large hydro-generator will operate in leading phase conditions to absorb the reactive power of the power grid.However,the accurate and precise prediction of the leading phase operation capacity of a large hydro-generator has always been a formidable challenge to engineers and academicians because it is extremely hard to compute the eddy currents and losses as well as the local overheating in the pressure plate and finger.To address this problem,a full three dimensional(3D)finite element model and method of the coupled eddy current and temperature fields in the end region of a large hydro-generator are developed.The equivalent medium parameters used in the computations are comprehensively discussed.Moreover,some numerically based solution methodologies for accurate computation of the field and armature currents under different leading phase conditions are proposed.Numerical results on the coupled eddy current and temperature fields in the end regions of a 250 MW hydro-generator confirm positively the feasibility of the present work.

The relationship between tidal current field and sediment transport in the Huanghai Sea and the Bohai Sea

-Based on a two-dimensional numerical M2 tidal model of the Huanghai and Bohai Seas, sediment transport of particles with different sizes in the computational area is given. It is concluded that tidal currents play an important role in sediment transport and deposition in the Huanghai and Bohai Seas.

Impact of Ion Current on Total Electric Field Measurement Under HVDC Transmission Line

The total electric field(TEF) at ground level induced by high-voltage direct current(HVDC) overhead transmission lines is one of the important indexes for evaluating the lines' electromagnetic environment.Based on analyzing the existing TEF sensors and the measurement principle of ion-current density,the influence from ions on TEF measurements is quantitively studied.The results show that the ions generated by the corona from a HVDC transmission line in operation cause errors in the measurement of TEF.This error is determined through analyzing the component of total measuring current on the filed mill's sensing electrode: if no appropriate approach taken,the maximum measurement error reaches up to 4.3%.Furthermore,a method that can eliminate such error,and hence improve the accuracy of TEF sensors is designed.

Temperature field at time of pulse current discharge in metal structure with elliptical embedding crack

Theoretical analysis is made on the temperature field at the time of pulse current discharge in a metal structure with an elliptical embedding crack. In finding the temperature field, analogy between the current flow through an elliptical embedding crack and the fluid flow through a barrier is made based on the similarity principle. Boundary conditions derived from this theory are introduced so that the distribution of current density and the temperature field expressions can be obtained. The study provides a theoretic basis to the applications of stopping spatial crack with electromagnetic heating.

A three-dimentional model of the northeast East China Sea, with application to the M2 current field

A simple three-dimensional tidal model is used to examine the M2 tidal current distribution in a northeastern part of the East China Sea, especially the vertical variation of the current in the region. Computed M2 current is compared with observations available and found to be in good agreement.Main features of the calculating method in this study are: (1) Vertical variation of the tidal current is taken as a funetion of the depth-mean velocity: (2) the method is applicable to a variety of the vertical eddy viscosities; (3) it has a fine vertical resolution, especially near the sea bootom. So, this method not only enables us to get a steady state solution easily but also depicts effects of the friction on the vertical variation of the current much better.

New Method for 3D Transient Eddy Current Field Calculation and Its Application in Magneto-Acoustic Tomography

A new method of 3D transient eddy current field calculation is proposed. The Maxwell equations with time component elimination （METCE） are derived under the assumption of magnetic quasi static approximation, especially for the sample of low conductivity. Based on METCE, we deduce a more efficient reconstruction algorithm of a 3D transient eddy current field. The computational burden is greatly reduced through the new algorithm, and the computational efficiency is improved. This new algorithm decompounds the space-time variables into two individual variables. The idea is to solve the spatial vector component firstly, and then multiply it by the corresponded time component. The iterative methods based on METCE are introduced to recover the distribution of conductivity in magneto-acoustic tomography. The reconstructed images of conductivity are consistent with the original distribution, which validate the new method.

FORCES ON CYLINDERS IN COEXISTING FIELD OF REGULAR WAVES AND CURRENTS

Based on the linear wave theory, the lift force on the cylinder under the action of both regular waves and currents related to inline force and the resultant force has been investigated. The relationship between the hydrodynamic coefficients of resultant force Cf, of drag force Cd, of inertia force Cm and of lift force CL and the redefined KC number is reported. It is indicated that in a certain region of KC number, the influence of lift force on the resultant force can not be ignored.

Validity and Accuracy of Eddy Current Field Analysis of Laminations by Introducing Equivalent Conductivities

对于分析叠片铁心中的涡流问题，利用各种等效电导率替代硅钢片实际电导率的匀质化方法是很有应用前景的。为了评估各种电导率模型，该文提出了铁心涡流场分析的二维解析验证方法，并分别基于引入各向异性或各向同性等效电导率的铁心连续体表述和实际叠片表述对涡流场进行了解析计算。通过比较连续体表述下所得到的平均磁通密度和涡流损耗值与相应由实际叠片表述所得到的精确解，对各种电导率模型的有效性和准确性在各种条件下进行了评估。为了进一步考察电导率模型对实际工程问题的适用性，利用有限元法进行了关于TEAM21面向工程基准问题的磁通和杂散场损耗计算。计算结果表明，由该文作者所提出的等效电导率模型优于其他模型。

The Relief of Plasma Pressure and Generation of Field-Aligned Currents in the Magnetosphere

A combined action of plasma convection and pitch-angle diffusion of electrons and protons leads to the formation of plasma pressure distribution in the magnetosphere on the night side, and, as it is known, steady electric bulk currents are connected to distribution of gas pressure. The divergence of these bulk currents brings about a spatial distribution of field-aligned currents, i.e. magnetospheric sources of ionospheric current. The projection (mapping) of the plasma pressure relief onto the ionosphere corresponds to the form and position of the auroral oval. This projection, like the real oval, executes a motion with a change of the convection electric field, and expands with an enhancement of the field. Knowing the distribution (3D) of the plasma pressure we can determine the places of MHD-compressor and MHD-generators location in the magnetosphere. Unfortunately, direct observations of plasma distribution in the magnetosphere are faced with large difficulties, because pressure must be known everywhere in the plasma sheet at high resolution, which in situ satellites have been unable to provide. Modeling of distribution of plasma pressure (on ~ 3-12 Re) is very important, because the data from multisatellite magnetospheric missions for these purposes would be a very expensive project.

Analysis on Thermal Current Field in Powertrain Cabin of Tracked Vehicles With Electric Transmission System Configuration-2

The electric transmission system congfiguration-2 is one of the main electric drives for tracked vehicles. The geometrical model for the power-train cabin is established and the preliminary design for its cooling system is implemented. The mathematic model is established for thermal current field computation, simulation and analysis in the powertrain cabin. The three-dimensional structure of the powertrain cabin is optimized. The validity of the cooling system design is proved. The foundation for optimizing the whole electric transmission system configuration is laid.

Derivation of sea surface current field from sequential satellite images of the East China Sea

A series of NOAA AVHRR data over the East China Sea were collected from the ground station of the Second Institute of Oceanography, Hangzhou, China. Three methods, including a functional analytic method (FAM), a maximum cross correlation (MCC)'method and a correlation relaxation (C - R) method, are applied to derive the sea surface current field from sequential satellite images in the area of the East China Sea. Several preprocessing steps, such as geometric correction, SST determination, image projection, image navigation and grey value normalization as well as land and cloud mask are performed. The results from the three methods reflect the general current system in this area reasonably.