Recent advances in fabrication and functions of neuromorphic system based on organic field effect transistor

The development of various artificial electronics and machines would explosively increase the amount of information and data,which need to be processed via in-situ remediation.Bioinspired synapse devices can store and process signals in a parallel way,thus improving fault tolerance and decreasing the power consumption of artificial systems.The organic field effect transistor(OFET)is a promising component for bioinspired neuromorphic systems because it is suitable for large-scale integrated circuits and flexible devices.In this review,the organic semiconductor materials,structures and fabrication,and different artificial sensory perception systems functions based on neuromorphic OFET devices are summarized.Subsequently,a summary and challenges of neuromorphic OFET devices are provided.This review presents a detailed introduction to the recent progress of neuromorphic OFET devices from semiconductor materials to perception systems,which would serve as a reference for the development of neuromorphic systems in future bioinspired electronics.

Overcome Debye Length Limitations for Biomolecule Sensing Based on Field Effective Transistors

Biosensors based on field effective transistor(FET)have aroused tremendous attention in the past few years owning to their huge application in drug discovery,disease diagnosis and environmental monitoring.The FET biosensors possess small volume,high sensitivity at ultra-low concentration,considerable mechanical strength,as well as excellent stability in solution,which plays a vital role in the point of care testing(POCT)systems.Recent advances have summarized some progress involved in the improvement of morphology and structure of channel materials,the functionalization of organic molecule,the influence of device operation and sensing environment on the detecting performance.However,for FET biosensors,the charge screening phenomena were inevitable in the solution,which seriously degrade the device performance.In this article,we summarize recent advances to overcome debye length limitations for biomolecule sensing based on FET.We will firstly describe the charge screening mechanism,then focous on the strategy to overcome charge screening,including synthesizing special channel materials with crumpled morphology,designing aptamer binding mode,and modulating device measurement.Finally,we discuss the major challenges and perspectives about overcoming debye length limitations of FET biosensors.These summaries provide further insights to realize real-time,lable-free,high-sensitivity FET sensors for medical healthcare.

High-performance vertical GaN field-effect transistor with an integrated self-adapted channel diode for reverse conduction

A vertical GaN field-effect transistor with an integrated self-adapted channel diode(CD-FET)is proposed to improve the reverse conduction performance.It features a channel diode(CD)formed between a trench source on the insulator and a P-type barrier layer(PBL),together with a P-shield layer under the trench gate.At forward conduction,the CD is pinched off due to depletion effects caused by both the PBL and the metal-insulator-semiconductor structure from the trench source,without influencing the on-state characteristic of the CD-FET.At reverse conduction,the depletion region narrows and thus the CD turns on to achieve a very low turn-on voltage(V_(F)),preventing the inherent body diode from turning on.Meanwhile,the PBL and P-shield layer can modulate the electric field distribution to improve the off-state breakdown voltage(BV).Moreover,the P-shield not only shields the gate from a high electric field but also transforms part of C_(GD)to CGS so as to significantly reduce the gate charge(Q_(GD)),leading to a low switching loss(E_(switch)).Consequently,the proposed CD-FET achieves a low V_(F)of 1.65 V and a high BV of 1446 V,and V_(F),Q_(GD)and E_(switch)of the CD-FET are decreased by 49%,55%and 80%,respectively,compared with those of a conventional metal-oxide-semiconductor field-effect transistor(MOSFET).

Si–Ge based vertical tunnel field-effect transistor of junction-less structure with improved sensitivity using dielectric modulation for biosensing applications

A dielectric modulation strategy for gate oxide material that enhances the sensing performance of biosensors in junction-less vertical tunnel field effect transistors(TFETs)is reported.The junction-less technique,in which metals with specific work functions are deposited on the source region to modulate the channel conductivity,is used to provide the necessary doping for the proper functioning of the device.TCAD simulation studies of the proposed structure and junction structure have been compared,and showed an enhanced rectification of 10^(4) times.The proposed structure is designed to have a nanocavity of length 10 nm on the left-and right-hand sides of the fixed gate dielectric,which improves the biosensor capture area,and hence the sensitivity.By considering neutral and charged biomolecules with different dielectric constants,TCAD simulation studies were compared for their sensitivities.The off-state current IOFFcan be used as a suitable sensing parameter because it has been observed that the proposed sensor exhibits a significant variation in drain current.Additionally,it has been investigated how positively and negatively charged biomolecules affect the drain current and threshold voltage.To explore the device performance when the nanogaps are fully filled,half filled and unevenly filled,extensive TCAD simulations have been run.The proposed TFET structure is further benchmarked to other structures to show its better sensing capabilities.

A non-quasi-static model for nanowire gate-all-around tunneling field-effect transistors

Nanowires with gate-all-around(GAA) structures are widely considered as the most promising candidate for 3-nm technology with the best ability of suppressing the short channel effects,and tunneling field effect transistors(TFETs)based on GAA structures also present improved performance.In this paper,a non-quasi-static(NQS) device model is developed for nanowire GAA TFETs.The model can predict the transient current and capacitance varying with operation frequency,which is beyond the ability of the quasi-static(QS) model published before.Excellent agreements between the model results and numerical simulations are obtained.Moreover,the NQS model is derived from the published QS model including the current-voltage(I-V) and capacitance-voltage(C-V) characteristics.Therefore,the NQS model is compatible with the QS model for giving comprehensive understanding of GAA TFETs and would be helpful for further study of TFET circuits based on nanowire GAA structure.

Design and Analysis of Graphene Based Tunnel Field Effect Transistor with Various Ambipolar Reducing Techniques

The fundamental advantages of carbon-based graphene material,such as its high tunnelling probability,symmetric band structure(linear dependence of the energy band on the wave direction),low effective mass,and characteristics of its 2D atomic layers,are the main focus of this research work.The impact of channel thickness,gate under-lap,asymmetric source/drain doping method,workfunction of gate contact,and High-K material on Graphene-based Tunnel Field Effect Transistor(TFET)is analyzed with 20 nm technology.Physical modelling and electrical characteristic performance have been simulated using the Atlas device simulator of SILVACO TCAD with user-defined material syntax for the newly included graphene material in comparison to silicon carbide(SiC).The simulation results in significant suppression of ambipolar current to voltage characteristics of TFET and modelled device exhibits a significant improvement in subthreshold swing(0.0159 V/decade),the ratio of Ion/Ioff(1000),and threshold voltage(-0.2 V with highly doped p-type source and 0.2 V with highly doped n-type drain)with power supply of 0.5 V,which make it useful for low power digital applications.

High Performance of Enhanced Mode Field Effect Transistor and Ultraviolet Sensor Based on ZnO Nanosheet

ZnO nanosheets with thickness of a few nanometers are prepared by vapor transport and condensation method, and their structure and optical properties are well characterized. Field effect transistor （FET） and ultraviolet （UV） sensors are fabricated based on the ZnO nanosheets. Due to the peculiar structure of nanosheet, the FET shows n-type enhanced mode behavior and high electrical performance, and its field-effect mobility and on/off cur- rent ratio can reach 256 cm2/（V.s） and ~10^8, respectively. Moreover, the response of UV sensors can also be remarkably improved to ~3 × 10^8. The results make the ZnO nanosheets be a good material for the applications in nanoelectronic and optoelectronic devices.

Progress of power field effect transistor based on ultra-wide bandgap Ga_2O_3 semiconductor material

As a promising ultra-wide bandgap semiconductor, gallium oxide(Ga_2O_3) has attracted increasing attention in recent years. The high theoretical breakdown electrical field(8 MV/cm), ultra-wide bandgap(～ 4.8 eV) and large Baliga's figure of merit(BFOM) of Ga_2O_3 make it a potential candidate material for next generation high-power electronics, including diode and field effect transistor(FET). In this paper, we introduce the basic physical properties of Ga_2O_3 single crystal, and review the recent research process of Ga_2O_3 based field effect transistors. Furthermore, various structures of FETs have been summarized and compared, and the potential of Ga_2O_3 is preliminary revealed. Finally, the prospect of the Ga_2O_3 based FET for power electronics application is analyzed.

Study of Non-Ideal Effects for Extended Gate Field Effect Transistor Chlorine Ion Sensing Device

We use the extended gate field effect transistor (EGFET)as the structure of the chlorine ion sensor,and the chlorine ion ionophores (ETH9033 and TDDMAC1)are incorporated into solvent polymeric membrane (PVC/DOS),then the chlorine ion selective membrane is formed on the sensing window,and the fabrication of the EGFET chlorine ion sensing device is completed.The surface potential on the sensing membrane of the EGFET chlorine ion sensing device will be changed in the different chlorine ion concentration solutions,then changes further gate voltage and drain current to detect chlorine ion concentration.We will study non-ideal effects such as temperature,hysteresis and drift effects for the EGFET chlorine ion sensing device in this paper,these researches will help us to improve the sensing characteristics of the EGFET chlorine ion sensing device.

Study on Extended Gate Field Effect Transistor with Nano-TiO-2 Sensing Membrane by Sol-Gel Method

The nano-titanium dioxide (nano-TiO_2) sensing membrane,fabricated by sol-gel technology,was used as the pH-sensing layer of the extended gate field effect transistor (EGFET) device.The objective of this research is the preparation of titanium dioxide materials by sol-gel method using Ti(OBu)_4 as the precursor.In this study,we fabricated a nano-titanium dioxide sensing layer on the ITO glass by dip coating.In order to examine the sensitivity of the nano-TiO_2 films applied to the EGFET devices,we adopted the ITO glass as substrate,and measured theⅠ_(DS)-Ⅴ_G curves of the nano-titanium dioxide separative structure EGFET device in the pH buffer solutions that have different pH values by the Keithley 236 Instrument.By the experimental results,we can obtain the pH sensitivities of the EGFET with nano-TiO_2 sensing membrane prepared by sol-gel method,which is 59.86mV/pH from pH 1 to pH 9.

Study on the Carbon Nanotube Separative Structure for the Extended Gate H^+-Ion Sensitive Field Effect Transistor

We use the carbon nanotube (CNT) as the material of the pH sensing layer of the separative structure for the extended gate H^+-ion sensitive field effect transistor (EGFET) device.The CNT paste was prepared with CNT powder,Ag powder,silicagel,the di-n-butyl phthalate and the toluene solvents by appropriate ratio,then immobilized on the silicon substrate to form the carbon nanotube sensing layer.We measured theⅠ_(DS)-Ⅴ_G curves of the carbon nanotube separative structure EGFET device in the different pH buffer solutions by the Keithley 236Ⅰ-Ⅴmeasurement system.According to the experimental results,we can obtain the pH sensitivities of the carbon nanotube separative structure EGFET device,which is 62.54mV/pH from pH1 to pH13.

Electrically Tunable Energy Bandgap in Dual-Gated Ultra-Thin Black Phosphorus Field Effect Transistors

The energy bandgap is an intrinsic character of semiconductors, which largely determines their properties. The ability to continuously and reversibly tune the bandgap of a single device during real time operation is of great importance not only to device physics but also to technological applications. Here we demonstrate a widely tunable bandgap of few-layer black phosphorus （BP） by the application of vertical electric field in dual-gated BP field-effect transistors. A total bandgap reduction of 124 meV is observed when the electrical displacement field is increased from 0.10 V/nm to 0.83 V/nm. Our results suggest appealing potential for few-layer BP as a tunable bandgap material in infrared optoelectronies, thermoelectric power generation and thermal imaging.

Effect of depositing PCBM on perovskite-based metal–oxide–semiconductor field effect transistors

In this manuscript,the perovskite-based metal–oxide–semiconductor field effect transistors（MOSFETs） with phenylC61-butyric acid methylester（PCBM） layers are studied.The MOSFETs are fabricated on perovskites,and characterized by photoluminescence spectra（PL）,x-ray diffraction（XRD）,and x-ray photoelectron spectroscopy（XPS）.With PCBM layers,the current–voltage hysteresis phenomenon is effetely inhibited,and both the transfer and output current values increase.The band energy diagrams are proposed,which indicate that the electrons are transferred into the PCBM layer,resulting in the increase of photocurrent.The electron mobility and hole mobility are extracted from the transfer curves,which are about one order of magnitude as large as those of PCBM deposited,which is the reason why the electrons are transferred into the PCBM layer and the holes are still in the perovskites,and the effects of ionized impurity scattering on carrier transport become smaller.

Low-Programmable-Voltage Nonvolatile Memory Devices Based on Omega-shaped Gate Organic Ferroelectric P(VDF-TrFE) Field Effect Transistors Using p-type Silicon Nanowire Channels

A facile approach was demonstrated for fabricating high-performance nonvolatile memory devices based on ferroelectric-gate field effect transistors using a p-type Si nanowire coated with omega-shaped gate organic ferroelectric poly(vinylidene fluoride-trifluoroethylene)(P(VDF-Tr FE)). We overcame the interfacial layer problem by incorporating P(VDF-Tr FE) as a ferroelectric gate using a low-temperature fabrication process. Our memory devices exhibited excellent memory characteristics with a low programming voltage of ±5 V, a large modulation in channel conductance between ON and OFF states exceeding 105, a long retention time greater than 3 9 104 s, and a high endurance of over 105 programming cycles while maintaining an ION/IOFFratio higher than 102.

Effect of Residual Charge Carrier on the Performance of a Graphene Field Effect Transistor

The temperature-dependent effect of residual charge carrier （no）, at the Dirac point, on mobility is studied. We fabricate and characterize a graphene field effect transistor （GFET） using 7nm TiO2 as the top-gate dielectric. The temperature-dependent gate voltage-drain current and room temperature gate capacitance are measured to extract the carrier mobility and to estimate the quantum capacitance of the GFET. The device shows the mobility value of gOO cm^2 /V.s at room temperature and it decreases to 45 cm^2 /V.s for 20 K due to the increase of n0. These results indicate that the phonon scattering is not the dominant process for the unevenness dielectric layer while the coulomb scattering by charged impurities degrades the device characteristically at low temperature.

Study on the Drift Effect of Potassium Ion Sensing Based on the Extended Gate Field Effect Transistor

The advantages of the extended gate field effect transistor (EGFET) compared with the ion sensitive field effect transistor (ISFET) are easy package,easy preservation,insensitive light effect,and better stability.Although EGFET has above advantages,there are still some non-ideal effects such as drift etc..The drift behavior exists during the measurement process and results in the variation of the output voltage with time.We can obtain the drift value by immersing EGFET into the pH solution for 12 hours and measure the rate of the output voltage versus time after S hours.This study analyzes the sensitivity, stability,and drift effect of the EGFET based on the structure of the ruthenium oxide/silicon (RuO_x/Si) wafer for measuring the potassium ion.The fabrication of the potassium ion sensor can be widely employed in medical detection.

Impact of Channel Length and Width for Charge Transportation of Graphene Field Effect Transistor

The effect of channel length and width on the large and small-signal parameters of the graphene field effect transistor have been explored using an analytical approach.In the case of faster saturation as well as extremely high transit frequency,the graphene field effect transistor shows outstanding performance.From the transfer curve,it is observed that there is a positive shift of Dirac point from the voltage of 0.15 V to 0.35 V because of reducing channel length from 440 nm to 20 nm and this curve depicts that graphene shows ambipolar behavior.Besides,it is found that because of widening channel the drain current increases and the maximum current is found approximately 2.4 mA and 6 mA for channel width 2μm and 5μm respectively.Furthermore,an approximate symmetrical capacitance-voltage(C-V)characteristic of the graphene field effect transistor is obtained and the capacitance reduces when the channel length decreases but the capacitance can be increased by raising the channel width.In addition,a high transconductance,that demands high-speed radio frequency(RF)applications,of 6.4 mS at channel length 20 nm and 4.45 mS at channel width 5μm along with a high transit frequency of 3.95 THz have been found that demands high-speed radio frequency applications.

Comparison of tunneling currents in graphene nanoribbon tunnel field effect transistors calculated using Dirac-like equation and Schrodinger’s equation

The tunneling current in a graphene nanoribbon tunnel field effect transistor(GNR-TFET) has been quantum mechanically modeled. The tunneling current in the GNR-TFET was compared based on calculations of the Dirac-like equation and Schrodinger’s equation. To calculate the electron transmittance, a numerical approach-namely the transfer matrix method(TMM)-was employed and the Launder formula was used to compute the tunneling current. The results suggest that the tunneling currents that were calculated using both equations have similar characteristics for the same parameters, even though they have different values. The tunneling currents that were calculated by applying the Dirac-like equation were lower than those calculated using Schrodinger’s equation.

Extended Gate Field Effect Transistor Based Measuring of the Vitamin C content of Orange Juice

An extended-gate field effect transistor (EGFET)of SnO_2/ITO glass was applied to manufacture the vitamin C sensor.Therefore,we immobilized the ascorbate oxidase with 3-glycidoxypropyltrimethoxysilane (GPTS)method to measure the different concentrations of the vitamin C solution in an optimum measurement environment.In order to find the best measurement conditions of the biosensor,we studied the vitamin C sensor in different pH values of the phosphate buffer solution (PBS).Additionally,we used experimental results to discuss the response time and response voltage to compare vitamin C with orange juice for the vitamin C sensor.