Three-dimensional finite element model was established to simulate temperature fields of T-joint titanium sheets during TIG welding with finite element method （FEM） software. Temperature dependent material propertie...Three-dimensional finite element model was established to simulate temperature fields of T-joint titanium sheets during TIG welding with finite element method （FEM） software. Temperature dependent material properties and the effect of latent heat were considered. A technique of element birth and death was used to simulate the process of welded metal filling. Dynamic variation process of temperature fields during T1G welding was achieved. The simulated results agreed well with the measured results.展开更多
This paper proposes a scheme for realizing entanglement swapping in cavity QED. The scheme is based on the resonant interaction of a two-mode cavity field with a ∧-type three-level atom. In contrast with the previous...This paper proposes a scheme for realizing entanglement swapping in cavity QED. The scheme is based on the resonant interaction of a two-mode cavity field with a ∧-type three-level atom. In contrast with the previously proposed schemes, the present scheme is ascendant, since the fidelity is 1.0 and the joint measurement isn＇t needed. And the scheme is experimentally feasible based on the current cavity QED technique.展开更多
The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field...The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.展开更多
The analysis of the impulse voltage on the internal electric field of the cable joint plays a key role in studying the breakdown of the joint. Based on the finite element method, a three-dimensional electromagnetic fi...The analysis of the impulse voltage on the internal electric field of the cable joint plays a key role in studying the breakdown of the joint. Based on the finite element method, a three-dimensional electromagnetic field simulation model of the cable joint is established in this paper. Simulation results show that the voltage at the head of the cable joint reaches about twice the impulse voltage. The increase of the conductivity of semi-conductive material also leads to the increase of electric field intensity. Then, several points and curves at different positions are selected for further analysis in this paper. Among them, the electric field distortion at the edge of the high voltage shield is the most serious and the electric field in the air gap is the least.展开更多
Taking cruciform welded joints under different corrosion degrees, together with 45° inclined angle and full penetration load-carrying fillet, as the research object, the stress intensity factor of a quarter-circu...Taking cruciform welded joints under different corrosion degrees, together with 45° inclined angle and full penetration load-carrying fillet, as the research object, the stress intensity factor of a quarter-circular comer crack of welded joints is calculated based on FRANC3D with ABAQUS. Effects of different corrosion pit sizes, crack aspect ratios, and crack depths on stress intensity factor are analyzed. The results show that pit depth plays a major role in stress intensity factor, while the effect of pit radius is relatively small. The cracking modes of the surface and the deepest point are mode I, and mixed modes I and II, respectively. Effects of pit depths, crack aspect ratios, and crack depths on the stress intensity factor at the surface point are greater than at the deepest point.展开更多
Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis ...Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis model is built in this paper according to this special structure. And then ANSYS finite element analysis software is used to analyze brazing temperature field at different brazing parameters. The calculation results show that the temperature field of simulation has good agreement with that measured by experiment, which proves dependence of the model built in this paper. And also reference parameters could be provided for real brazing process through calculation in this model. Brazed joint of capiUary to plate with good performance is achieved using VEBB technology. The achievement of the study will be applied in aerocrafi in the future.展开更多
基金China Postdoctoral Science Foundation (No 20080430129)
文摘Three-dimensional finite element model was established to simulate temperature fields of T-joint titanium sheets during TIG welding with finite element method （FEM） software. Temperature dependent material properties and the effect of latent heat were considered. A technique of element birth and death was used to simulate the process of welded metal filling. Dynamic variation process of temperature fields during T1G welding was achieved. The simulated results agreed well with the measured results.
基金Project supported by the National Natural Science Foundation of China （Grant No 10574022）, the Funds of the Natural Science of Fujian Province, China （Grant No Z0512006）.
文摘This paper proposes a scheme for realizing entanglement swapping in cavity QED. The scheme is based on the resonant interaction of a two-mode cavity field with a ∧-type three-level atom. In contrast with the previously proposed schemes, the present scheme is ascendant, since the fidelity is 1.0 and the joint measurement isn＇t needed. And the scheme is experimentally feasible based on the current cavity QED technique.
文摘The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.
文摘The analysis of the impulse voltage on the internal electric field of the cable joint plays a key role in studying the breakdown of the joint. Based on the finite element method, a three-dimensional electromagnetic field simulation model of the cable joint is established in this paper. Simulation results show that the voltage at the head of the cable joint reaches about twice the impulse voltage. The increase of the conductivity of semi-conductive material also leads to the increase of electric field intensity. Then, several points and curves at different positions are selected for further analysis in this paper. Among them, the electric field distortion at the edge of the high voltage shield is the most serious and the electric field in the air gap is the least.
基金supported by the National Natural Science Foundation of China(51378430 and 51378431)
文摘Taking cruciform welded joints under different corrosion degrees, together with 45° inclined angle and full penetration load-carrying fillet, as the research object, the stress intensity factor of a quarter-circular comer crack of welded joints is calculated based on FRANC3D with ABAQUS. Effects of different corrosion pit sizes, crack aspect ratios, and crack depths on stress intensity factor are analyzed. The results show that pit depth plays a major role in stress intensity factor, while the effect of pit radius is relatively small. The cracking modes of the surface and the deepest point are mode I, and mixed modes I and II, respectively. Effects of pit depths, crack aspect ratios, and crack depths on the stress intensity factor at the surface point are greater than at the deepest point.
文摘Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis model is built in this paper according to this special structure. And then ANSYS finite element analysis software is used to analyze brazing temperature field at different brazing parameters. The calculation results show that the temperature field of simulation has good agreement with that measured by experiment, which proves dependence of the model built in this paper. And also reference parameters could be provided for real brazing process through calculation in this model. Brazed joint of capiUary to plate with good performance is achieved using VEBB technology. The achievement of the study will be applied in aerocrafi in the future.
