Ionization of atoms in counter-rotating and co-rotating bicircular laser fields is studied using the S-matrix theory in both length and velocity gauges.We show that for both the bicircular fields,ionization rates are ...Ionization of atoms in counter-rotating and co-rotating bicircular laser fields is studied using the S-matrix theory in both length and velocity gauges.We show that for both the bicircular fields,ionization rates are enhanced when the two circularly polarized lights have comparable intensities.In addition,the curves of ionization rate versus the field amplitude ratio of the two colors for counter-rotating and co-rotating fields coincide with each other in the length gauge case at the total laser intensity 5×10^14 W/cm^2,which agrees with the experimental observation.Moreover,the degree of the coincidence between the ionization rate curves of the two bicircular fields decreases with the increasing field amplitude ratio and decreasing total laser intensity.With the help of the ADK theory,the above characteristics of the ionization rate curves can be well interpreted,which is related to the transition from the tunneling to multiphoton ionization mechanism.展开更多
By using a two-dimensional Monte-Carlo classical ensemble method, we investigate the double ionization（DI） process of the CS_2 molecule with different bond lengths in an 800-nm intense laser field. The double ioniza...By using a two-dimensional Monte-Carlo classical ensemble method, we investigate the double ionization（DI） process of the CS_2 molecule with different bond lengths in an 800-nm intense laser field. The double ionization probability presents a ＂knee＂ structure with equilibrium internuclear distance R = 2.9245 a.u.（a.u. is short for atomic unit）. As the bond length of CS increases, the DI probability is enhanced and the ＂knee＂ structure becomes less obvious. In addition,the momentum distribution of double ionized electrons is also investigated, which shows the momentum mostly distributed in the first and third quadrants with equilibrium internuclear distance R = 2.9245 a.u. As the bond length of CS increases,the electron momentum becomes evenly distributed in the four quadrants. Furthermore, the energy distributions and the corresponding trajectories of the double-ionized electrons versus time are also demonstrated, which show that the bond length of CS in the CS_2 molecule plays a key role in the DI process.展开更多
Spreading of antibiotic resistant bacteria into environment is becoming a major public health problem, implicating affair of the indirect transmission of antibiotic resistant bacteria to human through drinking water, ...Spreading of antibiotic resistant bacteria into environment is becoming a major public health problem, implicating affair of the indirect transmission of antibiotic resistant bacteria to human through drinking water, or vegetables, or daily products. Until now, the risk of nosocomial infection of antibiotic resistant bacteria has mainly been evaluated using clinical isolates by phenotypic method. To evaluate a risk of community-acquired infection of antibiotic resistant bacteria, a new method has been developed based on PCR-RFLP without isolation. By comparing restriction fragment lengths of the 16S rDNA gene from bacterial mixture grown under antibiotic treatment to those simulated from the DNA sequence, bacterial taxonomies were elucidated using the method of Okuda and Watanabe [1] [2]. In this study, taxonomies of polymyxin B resistant bacteria group in field soils, paddy field with organic manure and upland field without organic manure were estimated without isolation. In the both field soils, the major bacteria grown under the antibiotic were B. cereus group, which had natural resistance to this antibiotic. In field applied with organic manure, Prevotella spp., and the other Cytophagales, which were suggested to be of feces origin and to acquire resistance to the antibiotic, were detected. When numbers of each bacterial group were roughly estimated by the most probable number method, B. cereus group was enumerated to be 3.30 × 106 MPN/g dry soil in paddy field soil and 1.32 × 106 MPN/g dry soil in upland filed. Prevotella spp. and the other Cytophagales in paddy field were enumerated to be 1.31 × 106 MPN, and 1.07 × 106 MPN·g-1 dry soil.展开更多
This paper investigates the temperature field distribution and thermal focal length within a laser diode array （LDA） end-pumped YVO4/Nd：YVO4 rectangular composite crystal. A general expression of the temperature fi...This paper investigates the temperature field distribution and thermal focal length within a laser diode array （LDA） end-pumped YVO4/Nd：YVO4 rectangular composite crystal. A general expression of the temperature field distribution within the Nd：YVO4 rectangular crystal was obtained by analysing the characteristics of the Nd：YVO4 crystal and solving the Poisson equation with boundary conditions. The temperature field distributions in the Nd：YVO4 rectangular crystal for the YVO4/Nd：YVO4 composite crystal and the Nd：YVO4 single crystal are researched respectively. Calculating the thermal focal length within the Nd：YVO4 rectangular crystal was done by an analysis of the additional optical path differences （OPD） caused by heat, which was very identical with experimental results in this paper. Research results show that the maximum relative temperature on the rear face of the Nd：YVO4 crystal in the composite crystal is 150 K and the thermal focal length is 35.7mm when the output power of the LDA is 22 W. In the same circumstances, the experimental value of the thermal focal length is 37.4 mm. So the relative error between the theoretical analysis and the experimental result is only 4.5%. With the same conditions, the thermal focal length of the Nd：YVO4 single crystal is 18.5 mm. So the relative rate of the thermal focal length between the YVO4/Nd：YVO4 crystal and the Nd：YVO4 crystal is 93%. So, the thermal stability of the output power and the beam quality of the YVO4/Nd：YVO4 laser is more advantageous than the laser with Nd：YVO4 single crystal.展开更多
Long-range surface plasmon polariton （LRSPP） modes in an asymmetrical system, in which the thin metal film is sandwiched between a semi-infinite substrate and a high permittivity polymer film with a finite thickness...Long-range surface plasmon polariton （LRSPP） modes in an asymmetrical system, in which the thin metal film is sandwiched between a semi-infinite substrate and a high permittivity polymer film with a finite thickness, are theoret~ ically calculated and analyzed. Due to the high permittivity of the polymer film, at proper polymer film thicknesses, the index-matching condition of the dielectrics at both sides of the metal can be satisfied for supporting LRSPP modes, and the electromagnetic field above the metal can be localized well. It is found that these LRSPP modes have both long propagation lengths and subwavelength mode expansion above the metal at the optimal polymer film thickncsses. Furthermore, the requirements on the refractive index and the thickness of the polymer film to support LRSPP modes at the optimal thicknesses are found to be not critical.展开更多
In this study, a theoretical analysis of a solar field augmented by a fixed reflector placed in the front between the top of the preceding row and the bottom of the succeeding row is presented. An analytical model has...In this study, a theoretical analysis of a solar field augmented by a fixed reflector placed in the front between the top of the preceding row and the bottom of the succeeding row is presented. An analytical model has been developed and used to estimate the solar irradiation. The analytical model is based on the anisotropic sky model, assuming an infinite length of collector and reflector rows. A simulation has been carried out in order to figure out the behavior of the solar field and to find the optimum design parameters of the solar field leading to a maximum solar energy augmentation. The results obtained are depicted synoptically as a relationship between the solar field design parameters and the latitude angle, and this presentation enables us to determine the optimum design parameters in order to achieve the intended percentage improvement of solar radiation incident on the solar field rows at any location on the Northern hemisphere, which presents the novelty of this research. Also we have introduced a new parameter named “the effective height of the collector”, which presents the portion of the collector’s height illuminated by the reflector. This parameter is very important especially in case of PV solar fields, because it determines the domain of the concentrated solar energy over the surface of the PV panel.展开更多
The damage variables of describing the material damage state should be chosen first when the research of concrete structures by use of theory of damage theory. The method of calculation of damage parameter by the meas...The damage variables of describing the material damage state should be chosen first when the research of concrete structures by use of theory of damage theory. The method of calculation of damage parameter by the measure of the change of the elastic modulus of concrete specimens is effectively. In this paper, the wedge splitting tests with double bearing of three groups of different initial crack lengths of concrete specimens were conducted, and the stress and the strain of the points with different distance from the initial crack tip measured and calculated, and the damage value with peak stress of the various points were calculated based on the stress-strain curves. From the results of the test, the damage parameter can be confirmed under the non-uniform stress field, and the initial crack length has some influence on the damage parameter, and the longer the initial crack length and the greater the damage parameter.展开更多
Radial profiles of the ion temperature,Ti,have been measured by a double-sided retarding field analyzer（RFA） in the scrape-off layer（SOL） of the J-TEXT tokamak（R = 105 cm,r = 25-29 cm,Bt = 1.8-2.0 T,Ip = 120-180 ...Radial profiles of the ion temperature,Ti,have been measured by a double-sided retarding field analyzer（RFA） in the scrape-off layer（SOL） of the J-TEXT tokamak（R = 105 cm,r = 25-29 cm,Bt = 1.8-2.0 T,Ip = 120-180 kA,ne =（2-2.5） × 10^19 m^-3）.Strongly declining Ti profiles in the SOL have been found.The different e-folding lengths,At,of the Ti profiles in two experimental configurations with different magnetic connection lengths,Lc,reveal that a longer Lc results in weaker parallel energy transport and longer At.In similarity with the particle transport across the SOL,At is approximately proportional to the square root of Lc.Additionally,the poloidal asymmetry has been identified with enhanced ion energy transport across the SOL on the low-field side.展开更多
扩大头锚索因具有抗拔承载力大、支护效率高等优点在岩土工程中应用广泛,而注浆段落的长度和自由段保护套管的类型将对锚索受力变形特性产生影响。为此,依托实际工程开展了锚固段注浆+PE波纹管(设计方案)、全长注浆+聚乙烯(polyethylene...扩大头锚索因具有抗拔承载力大、支护效率高等优点在岩土工程中应用广泛,而注浆段落的长度和自由段保护套管的类型将对锚索受力变形特性产生影响。为此,依托实际工程开展了锚固段注浆+PE波纹管(设计方案)、全长注浆+聚乙烯(polyethylene, PE)波纹管(实际施工常用方案)、锚固段注浆+高密度聚乙烯(high density polyethylen, HDPE)套管、全长注浆+HDPE套管等四种不同工况扩大头锚索的现场拉拔试验,对比分析了不同工况下锚索的拉拔荷载-位移(Q-s)曲线、荷载-弹性位移(Q-se)曲线与荷载-塑性位移(Q-sp)曲线、自由段伸长量比例、刚度系数等受力变形特征。试验结果表明,相同注浆长度条件下,采用HDPE套管相比PE波纹管能够更好地发挥对自由段的隔离保护作用,保证自由段的变形性能;而采用相同套管类型时,注浆长度的增加会导致自由段伸长量值的减小,并会增大锚索刚度系数。在试验研究的基础上,提出现场锚索施工采用锚固段注浆+HDPE套管或全长注浆+HDPE套管的建议方案,从而保证锚索受力变形性能均达到设计预期。展开更多
基金Project supported by the Key Laboratory Project of Computational Physics of National Defense Science and Technology of China(Grant No.6142A05180401)the National Key Program for S&T Research and Development of China(Grant Nos.2019YFA0307700 and 2016YFA0401100)the National Natural Science Foundation of China(Grant Nos.11847307,11425414,11504215,11774361,and 11874246).
文摘Ionization of atoms in counter-rotating and co-rotating bicircular laser fields is studied using the S-matrix theory in both length and velocity gauges.We show that for both the bicircular fields,ionization rates are enhanced when the two circularly polarized lights have comparable intensities.In addition,the curves of ionization rate versus the field amplitude ratio of the two colors for counter-rotating and co-rotating fields coincide with each other in the length gauge case at the total laser intensity 5×10^14 W/cm^2,which agrees with the experimental observation.Moreover,the degree of the coincidence between the ionization rate curves of the two bicircular fields decreases with the increasing field amplitude ratio and decreasing total laser intensity.With the help of the ADK theory,the above characteristics of the ionization rate curves can be well interpreted,which is related to the transition from the tunneling to multiphoton ionization mechanism.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11574117 and11604131)
文摘By using a two-dimensional Monte-Carlo classical ensemble method, we investigate the double ionization（DI） process of the CS_2 molecule with different bond lengths in an 800-nm intense laser field. The double ionization probability presents a ＂knee＂ structure with equilibrium internuclear distance R = 2.9245 a.u.（a.u. is short for atomic unit）. As the bond length of CS increases, the DI probability is enhanced and the ＂knee＂ structure becomes less obvious. In addition,the momentum distribution of double ionized electrons is also investigated, which shows the momentum mostly distributed in the first and third quadrants with equilibrium internuclear distance R = 2.9245 a.u. As the bond length of CS increases,the electron momentum becomes evenly distributed in the four quadrants. Furthermore, the energy distributions and the corresponding trajectories of the double-ionized electrons versus time are also demonstrated, which show that the bond length of CS in the CS_2 molecule plays a key role in the DI process.
文摘Spreading of antibiotic resistant bacteria into environment is becoming a major public health problem, implicating affair of the indirect transmission of antibiotic resistant bacteria to human through drinking water, or vegetables, or daily products. Until now, the risk of nosocomial infection of antibiotic resistant bacteria has mainly been evaluated using clinical isolates by phenotypic method. To evaluate a risk of community-acquired infection of antibiotic resistant bacteria, a new method has been developed based on PCR-RFLP without isolation. By comparing restriction fragment lengths of the 16S rDNA gene from bacterial mixture grown under antibiotic treatment to those simulated from the DNA sequence, bacterial taxonomies were elucidated using the method of Okuda and Watanabe [1] [2]. In this study, taxonomies of polymyxin B resistant bacteria group in field soils, paddy field with organic manure and upland field without organic manure were estimated without isolation. In the both field soils, the major bacteria grown under the antibiotic were B. cereus group, which had natural resistance to this antibiotic. In field applied with organic manure, Prevotella spp., and the other Cytophagales, which were suggested to be of feces origin and to acquire resistance to the antibiotic, were detected. When numbers of each bacterial group were roughly estimated by the most probable number method, B. cereus group was enumerated to be 3.30 × 106 MPN/g dry soil in paddy field soil and 1.32 × 106 MPN/g dry soil in upland filed. Prevotella spp. and the other Cytophagales in paddy field were enumerated to be 1.31 × 106 MPN, and 1.07 × 106 MPN·g-1 dry soil.
文摘This paper investigates the temperature field distribution and thermal focal length within a laser diode array （LDA） end-pumped YVO4/Nd：YVO4 rectangular composite crystal. A general expression of the temperature field distribution within the Nd：YVO4 rectangular crystal was obtained by analysing the characteristics of the Nd：YVO4 crystal and solving the Poisson equation with boundary conditions. The temperature field distributions in the Nd：YVO4 rectangular crystal for the YVO4/Nd：YVO4 composite crystal and the Nd：YVO4 single crystal are researched respectively. Calculating the thermal focal length within the Nd：YVO4 rectangular crystal was done by an analysis of the additional optical path differences （OPD） caused by heat, which was very identical with experimental results in this paper. Research results show that the maximum relative temperature on the rear face of the Nd：YVO4 crystal in the composite crystal is 150 K and the thermal focal length is 35.7mm when the output power of the LDA is 22 W. In the same circumstances, the experimental value of the thermal focal length is 37.4 mm. So the relative error between the theoretical analysis and the experimental result is only 4.5%. With the same conditions, the thermal focal length of the Nd：YVO4 single crystal is 18.5 mm. So the relative rate of the thermal focal length between the YVO4/Nd：YVO4 crystal and the Nd：YVO4 crystal is 93%. So, the thermal stability of the output power and the beam quality of the YVO4/Nd：YVO4 laser is more advantageous than the laser with Nd：YVO4 single crystal.
基金supported by the National Natural Science Foundation of China (Grant Nos 10434020,10821062 and 10804004)the State Key Development Program for Basic Research of China (Grant Nos 2007CB307001 and 2009CB930504)the Research Fund for the Doctoral Program of Higher Education of China (Grant No 200800011023)
文摘Long-range surface plasmon polariton （LRSPP） modes in an asymmetrical system, in which the thin metal film is sandwiched between a semi-infinite substrate and a high permittivity polymer film with a finite thickness, are theoret~ ically calculated and analyzed. Due to the high permittivity of the polymer film, at proper polymer film thicknesses, the index-matching condition of the dielectrics at both sides of the metal can be satisfied for supporting LRSPP modes, and the electromagnetic field above the metal can be localized well. It is found that these LRSPP modes have both long propagation lengths and subwavelength mode expansion above the metal at the optimal polymer film thickncsses. Furthermore, the requirements on the refractive index and the thickness of the polymer film to support LRSPP modes at the optimal thicknesses are found to be not critical.
文摘In this study, a theoretical analysis of a solar field augmented by a fixed reflector placed in the front between the top of the preceding row and the bottom of the succeeding row is presented. An analytical model has been developed and used to estimate the solar irradiation. The analytical model is based on the anisotropic sky model, assuming an infinite length of collector and reflector rows. A simulation has been carried out in order to figure out the behavior of the solar field and to find the optimum design parameters of the solar field leading to a maximum solar energy augmentation. The results obtained are depicted synoptically as a relationship between the solar field design parameters and the latitude angle, and this presentation enables us to determine the optimum design parameters in order to achieve the intended percentage improvement of solar radiation incident on the solar field rows at any location on the Northern hemisphere, which presents the novelty of this research. Also we have introduced a new parameter named “the effective height of the collector”, which presents the portion of the collector’s height illuminated by the reflector. This parameter is very important especially in case of PV solar fields, because it determines the domain of the concentrated solar energy over the surface of the PV panel.
文摘The damage variables of describing the material damage state should be chosen first when the research of concrete structures by use of theory of damage theory. The method of calculation of damage parameter by the measure of the change of the elastic modulus of concrete specimens is effectively. In this paper, the wedge splitting tests with double bearing of three groups of different initial crack lengths of concrete specimens were conducted, and the stress and the strain of the points with different distance from the initial crack tip measured and calculated, and the damage value with peak stress of the various points were calculated based on the stress-strain curves. From the results of the test, the damage parameter can be confirmed under the non-uniform stress field, and the initial crack length has some influence on the damage parameter, and the longer the initial crack length and the greater the damage parameter.
基金supported by National Natural Science Foundation of China(No.11305070)the Ministry of Science and Technology(No.2013GB106001)the Open Foundation of the Key Laboratory of Geospace Environment,the CSA/SAFEA International Partnership Program for Creative Research Teams
文摘Radial profiles of the ion temperature,Ti,have been measured by a double-sided retarding field analyzer（RFA） in the scrape-off layer（SOL） of the J-TEXT tokamak（R = 105 cm,r = 25-29 cm,Bt = 1.8-2.0 T,Ip = 120-180 kA,ne =（2-2.5） × 10^19 m^-3）.Strongly declining Ti profiles in the SOL have been found.The different e-folding lengths,At,of the Ti profiles in two experimental configurations with different magnetic connection lengths,Lc,reveal that a longer Lc results in weaker parallel energy transport and longer At.In similarity with the particle transport across the SOL,At is approximately proportional to the square root of Lc.Additionally,the poloidal asymmetry has been identified with enhanced ion energy transport across the SOL on the low-field side.
文摘扩大头锚索因具有抗拔承载力大、支护效率高等优点在岩土工程中应用广泛,而注浆段落的长度和自由段保护套管的类型将对锚索受力变形特性产生影响。为此,依托实际工程开展了锚固段注浆+PE波纹管(设计方案)、全长注浆+聚乙烯(polyethylene, PE)波纹管(实际施工常用方案)、锚固段注浆+高密度聚乙烯(high density polyethylen, HDPE)套管、全长注浆+HDPE套管等四种不同工况扩大头锚索的现场拉拔试验,对比分析了不同工况下锚索的拉拔荷载-位移(Q-s)曲线、荷载-弹性位移(Q-se)曲线与荷载-塑性位移(Q-sp)曲线、自由段伸长量比例、刚度系数等受力变形特征。试验结果表明,相同注浆长度条件下,采用HDPE套管相比PE波纹管能够更好地发挥对自由段的隔离保护作用,保证自由段的变形性能;而采用相同套管类型时,注浆长度的增加会导致自由段伸长量值的减小,并会增大锚索刚度系数。在试验研究的基础上,提出现场锚索施工采用锚固段注浆+HDPE套管或全长注浆+HDPE套管的建议方案,从而保证锚索受力变形性能均达到设计预期。
