Field Performance Evaluation of a Small-Scale Drip Irrigation System Installed in the Upper West Region of Ghana

This study was conducted to evaluate the water application uniformity for a drip irrigation system, considering the water quality and the duration of usage. The uniformity parameters, Emission Uniformity (EU %) and Uniformity Coefficient (UC %) were determined for the drip irrigation system installed over a year of performance. The procedures are based on taking measurements of emitter discharge along selected driplines on a sub-main. The catch can be identified as L1A, L1B, L1C, L1D, same for L2A to L2D, L3A to L3D and L4A to L4D. This gave a total of sixteen (16) measurement positions as there were 4 driplines. Results indicated that the uniformity of water application was 90% indicating that the emitter was still good after a year of installation. The average discharge rate was 0.57 l/h. The uniformity coefficient (UC %) for the gravity-fed drip irrigation system was 78%, indicating good water application and was quite significant for the evaluation of the uniform distribution of water for the design. The expansion of this irrigation method in rural communities could contribute to relevant water savings in most areas of the Upper West Region of Ghana.

Effect of Residual Charge Carrier on the Performance of a Graphene Field Effect Transistor

The temperature-dependent effect of residual charge carrier （no）, at the Dirac point, on mobility is studied. We fabricate and characterize a graphene field effect transistor （GFET） using 7nm TiO2 as the top-gate dielectric. The temperature-dependent gate voltage-drain current and room temperature gate capacitance are measured to extract the carrier mobility and to estimate the quantum capacitance of the GFET. The device shows the mobility value of gOO cm^2 /V.s at room temperature and it decreases to 45 cm^2 /V.s for 20 K due to the increase of n0. These results indicate that the phonon scattering is not the dominant process for the unevenness dielectric layer while the coulomb scattering by charged impurities degrades the device characteristically at low temperature.

High-Temperature Performance Analysis of AlGaN/GaN Polarization Doped Field Effect Transistors Based on the Quasi-Multi-Channel Model

We report on the temperature-dependent dc performance of A1GaN/GaN polarization doped field effect transistors （PolFETs）. The rough decrements of drain current and transeonductance with the operation temperature are observed. Compared with the conventional HFETs, the drain current drop of the PolFET is smaller. The transeonductance drop of PolFETs at different gate biases shows different temperature dependences. From the aspect of the unique carrier behaviors of graded AlGaN/GaN heterostructure, we propose a quasi-multi-channel model to investigate the physics behind the temperature-dependent performance of AlGaN/GaN PolFETs.

Air-Flow Distribution Efficiency of a Precision Drill Used in the Sowing of Different Graded Seeds

Uniform seed spacing is considered a fundamental factor in quality and yield for many crops and drill manufacturers continuously try to improve the accuracy in seed placement, according to the cultivation standard requirements. This paper reports the results of tests on the performances of a six row pneumatic precision drill in which the depression into each sowing unit is created by means of flexible pipes that do not start directly from the fan, as in most pneumatic drills, but from an air duct having the function of uniformly distributing the air flow along the working width. Field tests have been conducted, using three graded seeds, to evaluate the accuracy of the single seed metering system, according to ISO 7256/1 standard, and the uniformity of negative pressure, through the measurement of the distance between seeds in the furrow, under two speed conditions （5 and 8 km bl）.

INTERNAL FLOW IN CROSS-FLOW FAN FOR AIR CONDITIONER

A numerical analytic process is suggested combining direct boundary element methodwith discrete vortex method and internal flow in cross-flow fan calculated. The process considersnot only function of impeller, but also effect of volute casing. Internal flow field of cross-flow fan ispractically measured, and results compared with that from calculation. It shows that the process isexpected to be used in predicting performances of fluid machinery.