Fabrication of Grain-oriented (Bi,Pb)_2Sr_2Ca_2Cu_3O_x Superconducting Tapes Using Magnetic Field and Vibration Technique

Highly textured (Bi,Pb)2Sr2Ca2Cu3Ox superconducting tapes have been fabricated by means of magnetic-field and vibration technique. This method is an effective way of improving the degree of grain alignment and density of oxide core in tapes after heat treatment and pressing cycles.Jc of above 20% was increased than that without treatment.

High-Fidelity Hugoniots of α Phase RDX Solid from High-Quality Force Field with Thermal,Zero-Point Vibration,and Anharmonic Effects

It is shown that the introduction of thermal effect, zero-point vibration, and phonon anharmonicity to a high quality and first-principle-Sased force field （atomic potential） results in a significant improvement in predict- ing the densities for the α phase crystalline hexahydro-1,3,5-trinitro-l,3,5-triazine （RDX）, and derivation of its high-fidelity Hugoniot locus and Mie-Grfineisen equation of state covering a very wide range of pressures and temperatures. This work can be used to efficiently and accurately predict the thermophysical properties of solid explosives over the pressures and temperatures to which they are subjected, which is a long-standing issue in the field of energetic materials.

Pulsating magneto-dipole radiation of a quaking neutron star powered by energy of Alfvn seismic vibrations

We compute the characteristic parameters of the magneto-dipole radiation of a neutron star undergoing torsional seismic vibrations under the action of Lorentz restoring force about an axis of a dipolar magnetic field experiencing decay. After a brief outline of the general theoretical background of the model of a vibration-powered neutron star, we present numerical estimates of basic vibration and radiation characteristics, such as frequency, lifetime and luminosity, and investigate their time dependence on magnetic field decay. The presented analysis suggests that a gradual decrease in frequencies of pulsating high-energy emission detected from a handful of currently monitored AXP/SGR-like X-ray sources can be explained as being produced by the vibration-powered magneto-dipole radiation of quaking magnetars.

A new model for film bulk acoustic wave resonators

Based on cavity resonance and sandwich composite plate （3D） theoretical model for frequency dispersion characterization theory, this paper presents a universal three-dimensional and displacement profile shapes of the film bulk acoustic resonator （FBARs）. This model provides results of FBAR excited thickness-extensional and flexure modes, and the result of frequency dispersion is proposed in which the thicknesses and impedance of the electrodes and the piezoelectric material are taken into consideration; its further simplification shows good agreement with the modified Butterworth-Van-Dyke （MBVD） model. The displacement profile reflects the vibration stress distribution of electrode shapes and the lateral resonance effect, which depends on the axis ratio of the electrode shapes a/b. The results are consistent with the 3D finite element method modeling and laser interferometry measurement in general.

Dynamic finite element model updating of prestressed concrete continuous box-girder bridge

The dynamic finite element model （FEM） of a prestressed concrete continuous box-girder bridge, called the Tongyang Canal Bridge, is built and updated based on the results of ambient vibration testing （AVT） using a real-coded accelerating genetic algorithm （RAGA）. The objective functions are defined based on natural frequency and modal assurance criterion （MAC） metrics to evaluate the updated FEM. Two objective functions are defined to fully account for the relative errors and standard deviations of the natural frequencies and MAC between the AVT results and the updated FEM predictions. The dynamically updated FEM of the bridge can better represent its structural dynamics and serve as a baseline in long-term health monitoring, condition assessment and damage identification over the service life of the bridge .

FINITE ELEMENT APPROXIMATION OF EIGENVALUE PROBLEM FOR A COUPLED VIBRATION BETWEEN ACOUSTIC FIELD AND PLATE

We formulate a coupled vibration between plate and acoustic field in mathematically rigorous fashion. It leads to a non-standard eigenvalue problem. A finite element approximation is considered in an abstract way, and the approximate eigenvalue problem is written in an operator form by means of some Ritz projections. The order of convergence is proved based on the result of Babugka and Osborn. Some numerical example is shown for the problem for which the exact analytical solutions are calculated. The results shows that the convergence order is consistent with the one by the numerical analysis.

Analyses of Dynamic Rheological Behavior of Polymer Melt Based on Novel Experimental Equipment and Procedures

By introducing a vibrating force field into the extrusion process of polymer melt, an experimental equipment of constant velocity type dynamic rheometer of capillary (CVDRC) was designed. A set of experimental procedures was established, by which the dynamic rheological parameters of polymer can be acquired, and a set of data management methods to undergo time-domain or frequency-domain analysis was set up for dynamic rheological data of polymer melt. Meantime, the characterization formula of polymer melt's rheological behavior in a vibrating force field was set up. The instantaneous value of capillary entry pressure, capillary volume flow rate and their phase difference were measured and analyzed, and the melt apparent viscosity, which describes the rheological behavior of polymer melt in a vibrating force field, was obtained.

Studies on nitramide and its methyl derivatives with ab initio calculations——Ⅳ.The harmonic force field and vibrational spectra of dimethylnitramine and its isotopic derivatives

The complete harmonic vibrational force field of dimethylnitramine has been calculated at the Hartree-Fock level using 4-21G basis set.The harmonic force field was then scaled with scale factors previously derived from N-methylnitramine,and the vibrational spectrum of dimethylnitramine was computed.This apriori prediction,made with no reference to observations on dimethylnitramine, agrees with the experimental IR spectrum in gas phase with a mean deviation of 8.4 cm^(-1).Some of the scale factors were reoptimized by fitting of the computed force field to experimental data.The new set of scale factors reduced the mean deviation to 4.5 cm^(-1),and was used to predict the vibrational spectrum of deuterated form of dimethylnitramine(-6D).Dipole moment derivatives were also cal- culated and used to predict infrared intensities which are comparable with experimental values.

Energy dissipation mechanism and experiment of particle dampers for gear transmission under centrifugal loads

As a passive means of vibration reduction, particle damping is mainly applied to the horizontal or vertical steady field. However, it is seldom applied to centrifugal fields. Under high speed and heavy loading, the vibration of tooth surfaces of gear transmissions becomes more severe shortening gear service life and augmenting noise. Under centrifugal loading, the particle system exhibits different characteristics, for example, particles are extruded at the end farthest from the center. We investigated gears with drilled via holes filled with damping particles. Using the discrete-element method, we developed an energy dissipation model for the particle system accounting for friction and inelastic collisions. Energy dissipation and damping characteristics of this system were analyzed. Experiments were also conducted with the gear system having different particle filling rates. The results show that this filling rate is an important parameter associated with particle damping in a centrifugal field. An unsuitable filling rate would significantly reduce damping effectiveness. With changes in rotation speed and load, the gear transmission system has different optimal filling rates. The results provide guidelines for the application of particle damping in centrifugal fields of gear transmissions.