Epoxy resin laminate onto which a pair of copper foil was printed was employed as test samples.The samples were placed in an artificial atmospheric chamber, which was vacuumed by a rotary pump from 100 kPa to 5 kPa.Th...Epoxy resin laminate onto which a pair of copper foil was printed was employed as test samples.The samples were placed in an artificial atmospheric chamber, which was vacuumed by a rotary pump from 100 kPa to 5 kPa.The magnetic field was produced by permanent magnets that were assembled to make E×B drift away from, into and parallel to the sample surface, respectively.Magnetic flux density was adjusted at 120 mT, 180 mT and 240 mT respectively.By applying a negative bias voltage between the electrodes, the ...展开更多
Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using pote...Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.展开更多
Accurately evaluating the lifespan of the Printed Circuit Board(PCB)in airborne equipment is an essential issue for aircraft design and operation in the marine atmospheric environment.This paper presents a novel evalu...Accurately evaluating the lifespan of the Printed Circuit Board(PCB)in airborne equipment is an essential issue for aircraft design and operation in the marine atmospheric environment.This paper presents a novel evaluation method by fusing Accelerated Degradation Testing(ADT)data,degradation data,and life data of small samples based on the uncertainty degradation process.An uncertain life model of PCB in airborne equipment is constructed by employing the uncertain distribution that considers the accelerated factor of multiple environmental conditions such as temperature,humidity,and salinity.In addition,a degradation process model of PCB in airborne equipment is constructed by employing the uncertain process of fusing ADT data and field data,in which the performance characteristics of dynamic cumulative change are included.Based on minimizing the pth sample moments,an integrated method for parameter estimation of the PCB in airborne equipment is proposed by fusing the multi-source data of life,degradation,and ADT.An engineering case illustrates the effectiveness and advantage of the proposed method.展开更多
基金Supported by National Natural Science Foundation of China (No.50777048)
文摘Epoxy resin laminate onto which a pair of copper foil was printed was employed as test samples.The samples were placed in an artificial atmospheric chamber, which was vacuumed by a rotary pump from 100 kPa to 5 kPa.The magnetic field was produced by permanent magnets that were assembled to make E×B drift away from, into and parallel to the sample surface, respectively.Magnetic flux density was adjusted at 120 mT, 180 mT and 240 mT respectively.By applying a negative bias voltage between the electrodes, the ...
基金Project(50871044)supported by the National Natural Science Foundation of ChinaProject(2012M511207)supported by the Postdoctoral Science Foundation of ChinaProject(10122011)supported by the Science Research Foundation of Wuhan Institute Technology,China
文摘Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.
基金supported by the National Natural Science Foundation of China(No.62073009).
文摘Accurately evaluating the lifespan of the Printed Circuit Board(PCB)in airborne equipment is an essential issue for aircraft design and operation in the marine atmospheric environment.This paper presents a novel evaluation method by fusing Accelerated Degradation Testing(ADT)data,degradation data,and life data of small samples based on the uncertainty degradation process.An uncertain life model of PCB in airborne equipment is constructed by employing the uncertain distribution that considers the accelerated factor of multiple environmental conditions such as temperature,humidity,and salinity.In addition,a degradation process model of PCB in airborne equipment is constructed by employing the uncertain process of fusing ADT data and field data,in which the performance characteristics of dynamic cumulative change are included.Based on minimizing the pth sample moments,an integrated method for parameter estimation of the PCB in airborne equipment is proposed by fusing the multi-source data of life,degradation,and ADT.An engineering case illustrates the effectiveness and advantage of the proposed method.
