Facile identification of fluorosurfactant category in aqueous film-forming foam concentrates via optimized^(19)F NMR

Aqueous film-forming foams(AFFFs)are the primary source of toxic perfluoroalkyl and polyfluoroalkyl substances(PFAS)in wastewater.Thus,it is urgent to develop a facile and fast method for identifying fluorosurfactants in commercially available AFFFs.In this work,fluorine nuclear magnetic resonance(^(19)F NMR)spectroscopy was optimized to measure AFFFs directly with the extra addition of 5%D_(2)O as the locking reagent,and high-quality spectra could be acquired within 4 min(0.1%fluorosurfactant content).Recovery experiments demonstrated that the use of different AFFFs had no marked influence on the quantitative analysis of fluorosurfactants.Such method works with low-field NMR spectroscopy(1.4 T)as well.Two-dimensional(2D)^(19)F COSY NMR was used to make signal assignments for different fluorosurfactant derivatives.The optimized ^(19)F NMR could quantify the commercially available fluorosurfactants in different AFFFs,identify them being in either the perfluorooctane sulfonate(PFOS)or fluorotelomer sulfonic acid(FTS)categories,and distinguish the head-group of PFOS and FTS derivatives,which exhibits great potentials in the developments of relevant commercial detections.

Model Estimation of Volatilization of Ammonia Appliedwith Surface Film-Forming Material

Greenhouse experiments were conducted to determine the ammonia volatilization loss with or withoutapplication of surface film-forming material (SFFM). Ammonia volatilization loss was estimated by the modeldeveloped by Jayaweera and Mikkelsen. The results showed that the model could estimate and predict wellammonia volatilization loss also in case of SFFM addition. There was an emended factor B introduced tothe model calculation when SFPM was used. Simulated calculation showed that the effect of factor B onNHa loss was obvious. The value of B was governed by SFFM and the environmental conditions. Sensitivityanalysis suggested that pH was the main factor coatrolling NH3 volatilization loss from the floodwater.

A Simulation Study on Effect of Surface Film-Forming Material on Water Evaporation

A greenhouse experiment was conducted to investigate the effect of surface film-forming material (SFFM), a mixture of 16-18-octadecanols by emulsification, on water evaporation. Air-dried soil with distilled water was incubated firstly for 7 days to reestablish soil biological activity and then for another 7 days after treated with SFFM at rates of 0, 1, 2, 4, 6 and 8 g m-2, respectively. Everyday during the 7-day incubation after addition of SFFM, water losses due to evaporation were ~measured by an electronic balance. The rate of water evaporation with the addition of SFFM was reduced significantly compared with the control treatment and the effectiveness of SFFM on water evaporation reduced with time. According to the equation expressions of the effect of SFFM on water evaporation, the half-life of electiveness of SFFM on water evaporation was introduced and calculated to analyze quantitative relationship between the effectiveness of SFFM on water evaporation and the addition rate of SFFM. The calculated half-life increased with the addition rate of SFFM and the confidence of the calculated values of the half-life was high, suggesting that the half-life of effectiveness of SFFM on water evaporation could be described quantitatively and may be helpful for ameliorating application method of SFFM and screening surface-film forming materials in order to improve nitrogen fertilizer use efficiency in flooded rice fields.

Rheological property of low-damage,ideal packing,film-forming amphoteric/sulfonation polymer drilling fluids

Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.

Investigating the effect of cosolvents on P3HT/O-IDTBR film-forming kinetics and film morphology

The morphology of active layer in bulk heterojunction(BHJ) organic solar cells is decisive to the device performance. Previous works have shown that the solvent engineering is an effective method to optimize the morphology of active layer. However, screening the proper solvent is a tedious task, and we know very little about how to select a proper solvent for a particular system, especially for polymer/nonfullerene blend systems. Here, we combined the spectroscopic analysis in various solvent mixtures during film-forming process to reveal the relationship among the cosolvent characteristics, film-forming kinetics and film morphology. In this article, P3 HT/O-IDTBR blend was selected as model system due to being facile synthesized under a large-scale. Chlorobenzene(CB) was selected as main solvent, and the cosolvents were grouped into three categories according to its boiling point(bp) compared to CB.The cosolvents with lower bp, like chloroform(CF), can facilitate a faster film-forming process, reducing the domain size but sacrificing the crystallinity of both components. For the cosolvents with higher bp,like o-dichlorobenzene(DCB) and 1,2,4-trichlorobenzene(TCB), the self-organization process of P3 HT and O-IDTBR is separated and its duration was extended, constructing highly crystalline nanointerpenetrating network. However, the cosolvents with very high bp, such as chlornaphthalene(CN),would residue in film and keep P3 HT and O-IDTBR self-organizing for longer time, leading to larger phase separation. This work systematically investigated the effect of cosolvent on the film-forming kinetics, and proposed a guideline of how to select a proper cosolvent according to the crystallinity and domain size of active layer.

A multifunctional shear apparatus for rocks subjected to true triaxial stress and high temperature in real-time

Deep engineering disasters,such as rockbursts and collapses,are more related to the shear slip of rock joints.A novel multifunctional device was developed to study the shear failure mechanism in rocks.Using this device,the complete shearedeformation process and long-term shear creep tests could be performed on rocks under constant normal stiffness(CNS)or constant normal loading(CNL)conditions in real-time at high temperature and true-triaxial stress.During the research and development process,five key technologies were successfully broken through:(1)the ability to perform true-triaxial compressioneshear loading tests on rock samples with high stiffness;(2)a shear box with ultra-low friction throughout the entire stress space of the rock sample during loading;(3)a control system capable of maintaining high stress for a long time and responding rapidly to the brittle fracture of a rock sample as well;(4)a refined ability to measure the volumetric deformation of rock samples subjected to true triaxial shearing;and(5)a heating system capable of maintaining uniform heating of the rock sample over a long time.By developing these technologies,loading under high true triaxial stress conditions was realized.The apparatus has a maximum normal stiffness of 1000 GPa/m and a maximum operating temperature of 300C.The differences in the surface temperature of the sample are constant to within5C.Five types of true triaxial shear tests were conducted on homogeneous sandstone to verify that the apparatus has good performance and reliability.The results show that temperature,lateral stress,normal stress and time influence the shear deformation,failure mode and strength of the sandstone.The novel apparatus can be reliably used to conduct true-triaxial shear tests on rocks subjected to high temperatures and stress.

The Use of an Innovative Film-Forming Wound Dressing in the Treatment of Radiation Dermatitis during Concomitant Chemotherapy

There is currently no consensus regarding the management of acute cutaneous reactions emerging from a concurrent treatment of radio-and chemotherapy, the goal of this case study series is to provide scientific evidence based on clinical practice regarding the efficacy of a film-forming wound dressing for patients receiving combined cancer therapy, in particular examples where the reactions are expected to be intense. In all the described cases, management of acute skin reactions allowed the cancer therapy to be finalized, instead of being interrupted due to an increase in the severity of the reactions. It has been shown in the current literature that the lack of compliance with treatment plans correlates with poorer clinical outcome. Evidence from the cases presented suggest that the studied dressing is safe and efficacious in the treatment and the prevention of acute cutaneous reactions arising from combined cancer therapy.

Challenges in the Development of Film-Forming Additives for Lithium Ion Battery: A Review

Electrolytes additives are ubiquitous and indispensable in all electrochemical devices. In this sense, the principle and the classification of film-forming additives for lithium ion secondary batteries are described. The film formation mechanism and research progress of the pyrazole derivatives, organic halogenide, esters and derivatives, boron compounds and inorganic compounds are introduced. Emphasis is focused on the principles and film-forming mechanisms of each additive. The development of film-forming additives is forecasted and prospected.

Film-Forming Systems in Topically Administered Pharmaceutical Formulations

The skin is the most extensive and outermost organ in the body and can be greatly exploited both from the point of view of alternative routes of systemic drug delivery and treatment of dermatological diseases. Because of its main function as a barrier against harmful external agents, it also becomes a barrier to drug administration, but there are strategies to reduce this limitation of this promising route of administration. The development of polymer-based film-forming formulations is extensively studied for this purpose, since the formation of a film on the skin increases the contact time of the drug, for this being characterized as a controlled release reservoir system. There are a multitude of possible polymers to compose these formulations and their choice must be made according to the purpose of each application. This work, therefore, aims to study the state of the art of film forming systems for topical application of pharmaceutical formulations.

A novel rapid cooling assembly design in a high-pressure cubic press apparatus

In traditional high-pressure–temperature assembly design, priority has been given to temperature insulation and retention at high pressures.This limits the efficiency of cooling of samples at the end of experiments, with a negative impact on many studies in high-pressure Earth andplanetary science. Inefficient cooling of experiments containing molten phases at high temperature leads to the formation of quench textures,which makes it impossible to quantify key compositional parameters of the original molten phase, such as their volatile contents. Here,we present a new low-cost experimental assembly for rapid cooling in a six-anvil cubic press. This assembly not only retains high heatingefficiency and thermal insulation, but also enables a very high cooling rate (∼600 ℃/s from 1900 ℃ to the glass transition temperature).Without using expensive materials or external modification of the press, the cooling rate in an assembly (∼600 ℃/s) with cube lengths of38.5 mm is about ten times faster than that in the traditional assembly (∼60 ℃/s). Experiments yielding inhomogeneous quenched melttextures when the traditional assembly is used are shown to yield homogeneous silicate glass without quench textures when the rapid coolingassembly is used.

The Research of Polymer Film-Forming Plugging Agent for Drilling Fluid

In order to improve the plugging and anti-collapse performance of water-based drilling fluid,a polymer film-forming plugging agent LWFD is synthesized by emulsion polymerization.The effect of the agent on rheology,API filtration loss,lubricity and film plugging of polymer drilling fluid and cationic drilling fluid is evaluated in laboratory.The experimental results show that the agent has little effect on the rheology and filtration loss of polymer drilling fluid and cationic drilling fluid,and can improve the lubricity of drilling fluid.The synthesized polymer film-forming plugging agent LWFD has good plugging properties for sand discs with different permeabilities,and the agent can effectively improve the film-forming plugging and temperature resistance of drilling fluid when combined with the inorganic nano-plugging agent NMFD.The high performance polymer drilling fluid formed by introducing polymer film-forming plugging agent LWFD and inorganic nano-plugging agent NMFD into polymer drilling fluid has comparable performance as Halliburton’s SHALEDRIL high performance drilling fluid,which can meet the requirements of on-site drilling and has application value.

A Novel High Temperature Apparatus for in situ Synchrotron X-ray Diffraction Studies of Molten Salt

This study demonstrates the design and application of a novel high temperature rotatory apparatus for insitu synchrotron X-ray diffraction studies of molten salts,facilitating investigation into the interaction between various structural materials and molten salts.The apparatus enables accurate detection of every phase change during hightemperature experiments,including strong reaction processes like corrosion.Molten salts,such as chlorides or fluo⁃rides,together with the structure materials,are inserted into either quartz or boron nitride capillaries,where X-ray diffraction pattern can be continuously collected,as the samples are heated to high temperature.The replacement re⁃action,when molten ZnCl2 are etching Ti3AlC2,can be clearly observed through changes in diffraction peak intensity as well as expansion in c-axis lattice parameter of the hexagonal matrix,due to the larger atomic number and ionic ra⁃dius of Zn2+.Furthermore,we investigated the high-temperature corrosion process when GH3535 alloy is in FLiNaK molten salt,and can help to optimize its stability for potential applications in molten salt reactor.Additionally,this high temperature apparatus is fully compatible with the combined usage of X-ray diffraction and Raman technique,providing both bulk and surface structural information.This high temperature apparatus has been open to users and is extensively used at BL14B1 beamline of the Shanghai Synchrotron Radiation Facility.

Analysis of strength characteristics of loess before and after freezing using a hollow cylinder torsional shear apparatus

This paper aims to comprehensively analyze the influence of the principal stress angle rotation and intermediate principal stress on loess's strength and deformation characteristics. A hollow cylinder torsional shear apparatus was utilized to conduct tests on remolded samples under both normal and frozen conditions to investigate the mechanical properties and deformation behavior of loess under complex stress conditions. The results indicate significant differences in the internal changes of soil particles, unfrozen water, and relative positions in soil samples under normal and frozen conditions, leading to noticeable variations in strength and strain development.In frozen state, loess experiences primarily compressive failure with a slow growth of cracks, while at normal temperature, it predominantly exhibits shear failure. With the increase in the principal stress angle, the deformation patterns of the soil samples under different conditions become essentially consistent, gradually transitioning from compression to extension, accompanied by a reduction in axial strength. The gradual increase in the principal stress axis angle(α) reduces the strength of the generalized shear stress and shear strain curves.Under an increasing α, frozen soil exhibits strain-hardening characteristics, with the maximum shear strength occurring at α = 45°. The intermediate principal stress coefficient(b) also significantly impacts the strength of frozen soil, with an increasing b resulting in a gradual decrease in generalized shear stress strength. This study provides a reference for comprehensively exploring the mechanical properties of soil under traffic load and a reliable theoretical basis for the design and maintenance of roadbeds.

Embryogenesis of Polyembryonic Rice ApⅢ: Structural and Histochemical Studies of Egg Apparatus Around Fertilization

The structural and histochemical changes of the egg apparatus in the polyembryonic rice ( Oryza sativa L.), ApⅢ with the highest frequence of additional embryos among the polyembryonic rice investigated, before and after fertilization were studied and compared with those of normal and other polyembryonic rices in a similar developmental period. A total of 2 932 ovules were observed and each of them contained only a single embryo sac with a set of egg apparatus. Among 1 655 embryo sacs, there were 1 643 embryo sacs (99.27%) with one normal egg apparatus in each embryo sac, and only 12 embryo sacs (0.73%) from the remainder with 4_celled egg apparatus, i.e. two eggs and two synergids. Neither the numerous poly_egg apparatus and egg_like cells, nor the double set of embryo sacs each containing one egg apparatus and other abnormal egg apparatus in single ovary, which were reported by earlier investigators to have high frequency of embryo production in SB_1 and ApⅣ, were observed. The egg cell was located at the subterminal site of the micropylar end of embryo sac. The cytoplasm of egg cell was rich in protein materials and polysaccharide grains, which did not disappear until the division of zygote. The prominent nucleus was closely surrounded by protein and polysaccharide grains, which did not disappear until the division of zygote. No cytological difference was found between egg cells from the normal and abnormal egg apparatus. The two synergids were fully developed and situated at the upper most part of the micropylar end of the mature embryo sac. In most embryo sacs, the synergids were flask_shaped with longer necks, and a widened cap_shaped top, in close contact with the micropyle. The synergids had a well developed filiform apparatus. The characteristic appearance of the filiform apparatus as well as the cap_neck region of synergids before and after pollen tube penetration were easily distinguishable from the egg cell. The structure, the stainability with Coomassie Brilliant Blue and PAS reaction, the process of accumulation, distribution and disapperance of the cytoplasmic protein materials and polysaccharide grains of the two synergids, the persistent and rarely the receptive synergids before and after pollen tube penetration, were closely similar to those of egg cell of the same developmental stage. In comparison with normal and other polyembryonic rice reported, the size of nucleus and nucleolus and their stainability also strongly resembled those of egg cell. Based on the results observed, the main conclusions are summarized as follows: (1) the additional embryos very frequently developed in the young and mature seed of polyembryonic rice ApⅢ were produced by one or two synergids of normal egg apparatus, rarely by 4_celled egg apparatus; (2) during fertilization, the synergids, in addition to the natural specific function of introducing pollen tube and transferring sperms to egg cell and central cell, could be closely associated with the potentiality to breed one or two additional embryos; and (3) as compared with that of normal or other polyembryonic rice it is firstly disclosed that in a few embryo sacs of ApⅢ, the cytoplasmic and nuclear structure, the active anabolism and catabolism of protein and polysaccharide materials and the delayed disorganization at the mid_basal region of the receptive and persistent synergid still remained unchanged before the division of zygote. Such salient features could be the predisposition for the origin of additional embryos in ApⅢ.

STRIDULATION APPARATUSES OF SIX SPECIES OF Agromyza (Diptera:Agromyzidae)

The present paper deals with stridulation apparatuses,observed by SEM,of 6 species of the genus Agromyza from China (2 species among them are newly recorded to China).Some morphological terms are proposed for the first time,and a key to 6 species of Agromyza applied by the characteristics of stridulatory file is given.We also scheme out a diagram showing relationship between two stridulatory file types.

Adsorption and desorption behaviors of ssDNA molecules on mica surface by surface forces apparatus

An approach for studying the adsorption and desorption behaviors of single-stranded DNA（ ssDNA） molecules on the mica surface by the surface forces apparatus（ SFA） is reported,which can be used to characterize the precise thickness,configuration and mechanical properties of ssDNA layers on the mica surface at a certain buffer solution. The formation of ss DNA layers is first studied by tuning the ssDNA concentrations, and the experimental results indicate that the ss DNA concentration of 100 ng / μL is ideal for forming a ssDNA monolayer structure on the mica surface, and the hardwall value measured to be 1.04 nm under this circumstance is regarded as the thickness of the ssDNA monolayer confined on mica. The desorption behavior of ssDNA molecules from the mica surface is further studied by observing and comparing different shapes of the force-distance curves under certain conditions. It is found that the desorption of ss DNA molecules from the mica surface occurs as the monovalent salts are added into the gap buffer. It is inferred that the competition effect between monovalent and divalent salts can induce the release of ssDNA from substrate.The results also reveal that 10 mmol / L monovalent salts（ Na~＋）is sufficient for the desorption of ssDNA from mica. This work provides an applicable method to study the binding mechanism of ss DNA molecules on inorganic substrates.

Recent advances of high-pressure generation in a multianvil apparatus using sintered diamond anvils

The tried and tested multianvil apparatus has been widely used for high-pressure and hightemperature experimental studies in Earth science. As a result, many important results have been obtained for a better understanding of the components, structure and evolution of the Earth. Due to the strength limi- tation of materials, the attainable multianvil pressure is generally limited to about 30 GPa （corresponding to about 900 km of the depth in the Earth） when tungsten carbide cubes are adopted as second-stage anvils. Compared with tungsten carbide, the sintered diamond is a much harder material. The sintered diamond cubes were introduced as second-stage anvils in a 6--8 type multianvil apparatus in the 1980s, which largely enhanced the capacity of pressure generation in a large volume press. With the development of material synthesis and processing techniques, a large sintered diamond cube （14 ram） is now available. Recently, maximum attainable pressures reaching higher than 90 GPa （corresponding to about 2700 km of the depth in the Earth） have been generated at room temperature by adopting 14-mm sintered diamond anvils. Using this technique, a few researches have been carried out by the quenched method or combined with synchrotron radiation in situ observation. In this paper we review the properties of sintered diamond and the evolu- tion of pressure generation using sintered diamond anvils. As-yet unsolved problems and perspectives for uses in Earth Science are also discussed.

A Breakthrough in Pressure Generation by a Kawai-Type Multi-Anvil Apparatus with Tungsten Carbide Anvils

Expansion of the pressure range of Kawai-type multi-anvil presses (KMAPs) with tungsten carbide (WC) anvils is called for, especially in the field of Earth science. However, no significant progress in pressure generation has been made for 40 years. Our recent studies have expanded the pressure generation of a KMAP with WC anvils to 65 GPa, which is the world record for high-pressure generation in this device and is more than 2.5 times higher than conventional pressure generation. We have also successfully generated pressures of about 50 GPa at high temperatures. This work reviews our recently developed technology for high-pressure generation. High-pressure generation at room temperature and at high temperature was attained by integration of the following techniques:① a precisely aligned guideblock system,② a high degree of hardness of the second-stage anvils,③ tapering of the second-stage anvil faces,④ a high-pressure cell consisting of materials with a high bulk modulus, and ⑤ high thermal insulation of the furnace. Our high-pressure technology will facilitate investigation of the phase stability and physical properties of materials under the conditions of the upper part of the lower mantle, and will permit the synthesis and characterization of novel materials.

Effects of Acetylsalicylic Acid and Calcium Chloride on Photosynthetic Apparatus and Reactive Oxygen-Scavenging Enzymes in Chrysanthemum Under Low Temperature Stress with Low Light

The effects of acetylsalicylic acid （ASA）, CaCl2, and ASA ＋ CaCl2 on the photosynthetic apparatus and antioxidant enzyme activities were investigated in chrysanthemum Jinba （a cut flower cultivar） under low temperature stress with low light （TL stress） （16/12℃, day/night, PFD 100 μmol m^-2 s-1）. The results showed that under TL stress, the net photosynthesis rate （Pn）, carboxylation efficiency （CE）, apparent quantum yield （AQY）, maximal photochemical efficiency （Fv/Fm） of PSII, quantum yield of PSII electron transport （ФPSII）, and photochemical quenching （qP） of the chrysanthemum leaves in all treatments were significantly decreased, but the decreases were alleviated by ASA, CaCl2, and ASA ＋ CaCl2 treatments compared with the controls. The alleviating effect of ASA ＋ CaCI2 was better than either ASA or CaCl2 single treatment. Moreover, the ASA ＋ CaCl2 treatment highly improved the chlorophyll content, relatively improved the number and size of chloroplast and starch grain in the leaves of chrysanthemum plants compared with ASA and CaCl2 treatments. It was indicated that ASA and/or CaCI2 could regulate the photosynthetic functions in the leaves of chrysanthemum plants to enhance the resistance against TL stress. On the other hand, reduction in relative conductance rate implied that ASA and/ or CaCl2 could protect from membrane injury in leaves of chrysanthemum plants. The activities of SOD, POD, and CAT in the treated leaves of chrysanthemum were increased as compared with the controls. It was suggested that ASA and/or CaCl2 had positive regulation effects on the defence enzyme activities in chrysanthemum leaves which could protect the photosynthetic apparatus to a certain degree under the TL stress. In brief, the treatment of ASA together with CaCl2 was better for chrysanthemum plants to adapt TL stress than single ASA or CaCl2 treatments.

Morphology of platelet Golgi apparatus and their significance after acute cerebral infarction

Blood samples were harvested from the antecubital vein of 20 fasting patients with acute cerebral infarction at 1, 7 and 15 days after onset to prepare blood platelet suspension. Fasting antecubital vein blood was collected from an additional 20 normal adults as controls. Under transmission elec- tron microscope, platelet Golgi tubules and vesicles became significantly thickened, enlarged, and irregular after acute cerebral infarction. Alpha granules in platelets significantly reduced in number, especially 1 day after cerebral infarction. Under immunoelectron microscopy, a few alpha granules aggregated around Golgi tubules and vesicles after infarction. These results suggested that platelet Golgi apparatus displayed significant morphological changes, which were possibly associated with enhanced synthetic and secretory functions of activated platelets after acute cerebral infarction. This study used Golgi apparatus blocking agent Brefeldin A to block Golgi apparatus in an aim to study the effects of Golgi apparatus on CD40L expression on the surface of activated platelets. Flow cytometry revealed that CD40L expression on activated platelet surfaces decreased significantly when Golgi apparatus was blocked, which indicated that Golgi apparatus participated in the syn- thesis and transport of CD40L to the platelet surface.