Application of wavelet package filtering in the de-noising of fiber optic gyroscopes

To reduce the drift error existing in the output signal of fiber optic gyroscopes （FOG）, a mathematical model of the FOG output signal is set up; the error characteristics of the FOG output signal are analyzed, and semi-soft threshold filtering is chosen based on the comparison of hard threshold and soft threshold filtering. The semi-soft threshold wavelet package filtering method is applied in the filtering of the FOG output signal. Experiments of the stationary and dynamic FOG output signals filtered with the wavelet package analysis are carried out in a lab environment, respectively. Experiments done with the real-time measured FOG signal show that the method of semi-soft threshold wavelet package filtering reduces the mean square error from 5 （°）/h to 1 （°）/h, so it is effective in eliminating the white noises and the fractal noises existing in the FOG. The novel method proposed here is proved valid in reducing the FOG drift error, satisfying the technical demands of high precision and realtime processing.

Modified wavelet filtering algorithm applied to gyro servo technology for the improvement of test-precision

In order to improve the measurement-precision of the gyro,the gyro experiment is completed based on gyro servo technology.The error sources of gyro servo technology are analyzed in the process of measurement,and the impact of these error sources on measurement is evaluated.To eliminate interference signal existing in the sampled data of the measurement,a modified wavelet threshold filtering method is presented.The results of the simulation and measurement show that the estimation-precision of the proposed method is improvement remarkably compared with the fast Fourier transform method,and the calculation work is reduced compared with the conventional wavelet threshold filtering methods,furthermore,the phenomenon of a common threshold of ＂killing＂ is solved thoroughly.

Application of S-transform threshold filtering in Anhui experiment airgun sounding data de-noising

As a relatively new method of processing non-stationary signal with high time-frequency resolution, S transform can be used to analyze the time-frequency characteristics of seismic signals. It has the following characteristics: its time-frequency resolution corresponding to the signal frequency, reversible inverse transform, basic wavelet that does not have to meet the permit conditions. We combined the threshold method, proposed the S-transform threshold filtering on the basis of S transform timefrequency filtering, and processed airgun seismic records from temporary stations in "Yangtze Program"(the Anhui experiment). Compared with the results of the bandpass filtering, the S transform threshold filtering can improve the signal to noise ratio(SNR) of seismic waves and provide effective help for first arrival pickup and accurate travel time. The first arrival wave seismic phase can be traced farther continuously, and the Pm seismic phase in the subsequent zone is also highlighted.

Threshold Filtering Semi-Supervised Learning Method for SAR Target Recognition

The semi-supervised deep learning technology driven by a small part of labeled data and a large amount of unlabeled data has achieved excellent performance in the field of image processing.However,the existing semisupervised learning techniques are all carried out under the assumption that the labeled data and the unlabeled data are in the same distribution,and its performance is mainly due to the two being in the same distribution state.When there is out-of-class data in unlabeled data,its performance will be affected.In practical applications,it is difficult to ensure that unlabeled data does not contain out-of-category data,especially in the field of Synthetic Aperture Radar(SAR)image recognition.In order to solve the problem that the unlabeled data contains out-of-class data which affects the performance of the model,this paper proposes a semi-supervised learning method of threshold filtering.In the training process,through the two selections of data by the model,unlabeled data outside the category is filtered out to optimize the performance of the model.Experiments were conducted on the Moving and Stationary Target Acquisition and Recognition(MSTAR)dataset,and compared with existing several state-of-the-art semi-supervised classification approaches,the superiority of our method was confirmed,especially when the unlabeled data contained a large amount of out-of-category data.

GENERALIZED FUZZY FILTERS OF BL-ALGEBRAS

The concept of quasi-coincidence of a fuzzy interval value with an interval valued fuzzy set is considered. In fact, this is a generalization of quasi-coincidence of a fuzzy point with a fuzzy set. By using this new idea, the notion of interval valued （∈,∈ ∨q）-fuzzy filters in BL-algebras which is a generalization of fuzzy filters of BL-algebras, is defined, and related properties are investigated. In particular, the concept of a fuzzy subgroup with thresholds is extended to the concept of an interval valued fuzzy filter with thresholds in BL-algebras.

Research on Anti-noise Processing Method of Production Signal Based on Ensemble Empirical Mode Decomposition(EEMD)

The grain production prediction is one of the most important links in precision agriculture. In the process of grain production prediction, mechanical noise caused by the factors of difference in field topography and mechanical vibration will be mixed in the original signal, which undoubtedly will affect the prediction accuracy. Therefore, in order to reduce the influence of vibration noise on the prediction accuracy, an adaptive Ensemble Empirical Mode Decomposition(EEMD) threshold filtering algorithm was applied to the original signal in this paper: the output signal was decomposed into a finite number of Intrinsic Mode Functions(IMF) from high frequency to low frequency by using the Empirical Mode Decomposition(EMD) algorithm which could effectively restrain the mode mixing phenomenon; then the demarcation point of high and low frequency IMF components were determined by Continuous Mean Square Error criterion(CMSE), the high frequency IMF components were denoised by wavelet threshold algorithm, and finally the signal was reconstructed. The algorithm was an improved algorithm based on the commonly used wavelet threshold. The two algorithms were used to denoise the original production signal respectively, the adaptive EEMD threshold filtering algorithm had significant advantages in three denoising performance indexes of signal denoising ratio, root mean square error and smoothness. The five field verification tests showed that the average error of field experiment was 1.994% and the maximum relative error was less than 3%. According to the test results, the relative error of the predicted yield per hectare was 2.97%, which was relative to the actual yield. The test results showed that the algorithm could effectively resist noise and improve the accuracy of prediction.

Tunnel personnel positioning method based on TOA and modified location-fingerprint positioning

To position personnel in mines, the study discussed in this paper built on the tunnel personnel positioning method on the basis of both TOA and location-finger print(LFP) positioning. Given non-line of sight(NLOS) time delay in signal transmission caused by facilities and equipment shielding in tunnels and TOA measurement errors in both LFP database data and real-time data, this paper puts forth a database data de-noising algorithm based on distance threshold limitation and modified mean filtering(MMF), as well as a real-time data suppression algorithm based on speed threshold limitation and MMF.On this basis, a nearest neighboring data matching algorithm based on historical location and the speed threshold limitation is used to estimate personnel location and realize accurate personnel positioning.The results from both simulation and the experiment suggest that: compared with the basic LFP positioning method and the method that only suppresses real-time data error, the tunnel personnel positioning methods based on TOA and modified LFP positioning permits effectively eliminating error in TOA measurement, making the measured data close to the true positional data, and dropping the positioning error:the maximal positioning error in measurements from experiment drops by 9 and 3 m, respectively, and the positioning accuracy of 3 m is achievable in the condition used in the experiment.

Adaptive Threshold Median Filter for Multiple-Impulse Noise

Attenuating the noises plays an essential role in the image processing. Almost all the traditional median filters concern the removal of impulse noise having a single layer, whose noise gray level value is constant. In this paper, a new adaptive median filter is proposed to handle those images corrupted not only by single layer noise. The adaptive threshold median filter （ATMF） has been developed by combining the adaptive median filter （AMF） and two dynamic thresholds. Because of the dynamic threshold being used, the ATMF is able to balance the removal of the multiple-impulse noise and the quality of image. Comparison of the proposed method with traditional median filters is provided. Some visual examples are given to demonstrate the performance of the proposed filter.

A real-time 5/3 lifting wavelet HD-video de-noising system based on FPGA

In accordance with the application requirements of high definition(HD) video surveillance systems,a real-time 5/3 lifting wavelet HD-video de-noising system is proposed with frame rate conversion(FRC) based on a field-programmable gate array(FPGA),which uses a 3-level pipeline paralleled 5/3 lifting wavelet transformation and reconstruction structure,as well as a fast BayesS hrink adaptive threshold filtering module.The proposed system demonstrates de-noising performance,while also balancing system resources and achieving real-time processing.The experiments show that the proposed system's maximum operating frequency(through logic synthesis and layout using Quartus 13.1 software) can reach 178 MHz,based on the Altera Company's Stratix III EP3SE80 series FPGA.The proposed system can also satisfy real-time de-noising requirements of 1920 × 1080 at60 fps HD-video sources,while also significantly improving the peak signal to noise rate of the denoising images.Compared with similar systems,the system has the advantages of high operating frequency,and the ability to support multiple source formats for real-time processing.