Homogeneous(unseeded)precipitation of magnesium carbonate hydrates by the reaction of MgCl2 with Na2CO3 in supersaturated solutions between 273 and 363K was investigated.The compositions,morphologies and filtration ch...Homogeneous(unseeded)precipitation of magnesium carbonate hydrates by the reaction of MgCl2 with Na2CO3 in supersaturated solutions between 273 and 363K was investigated.The compositions,morphologies and filtration characteristics of the precipitates were studied in detail.The magnesium carbonate hydrates obtained at 313K and in the range of 343-363K showed good morphologies and filtration characteristics.Magnesium oxides(MgO)with high purity(97.6%-99.4%)were obtained by calcining magnesium carbonate hydrates at 1073K.展开更多
Indian hematite fines are normally characterized by high iron grade and minor impurities, which are usually used for sinter fines. With macroscale operations technology of blast furnace in Indian, pellets, as a kind o...Indian hematite fines are normally characterized by high iron grade and minor impurities, which are usually used for sinter fines. With macroscale operations technology of blast furnace in Indian, pellets, as a kind of high-quality materials, attract more and more attention. However, the hematite fines possess the coarse size. Hence, they inevitably need to be further finely ground for pelletizing before balling. The grinding behavior of Indian hematite fines was revealed by conducting the ball milling tests and determining the Bond ball mill work index （Wi）. The results show that Indian hematite fines have an excellent grindability with Wi of only 7.40-7.73 kWh/t, indicating that ball milling is an economically viable way to pretreat Indian hematite fines. Nonetheless, due to poor sedimentation and filtering properties of wet ground products, the dry ball milling is more appropriate to process Indian hematite fines. In addition, the superior quality green balls can be manufactured with dry ground products under the conditions of 0.5% bentonite dosage, 7.5% moisture and balling for 12 min, which further confirmed that the recommended pellet feed preparation technique is reasonable.展开更多
基金Supported by the National Natural Science Foundation of China （20876161） and the National Basic Research Program of China （2007CB613501, 2009CB219904）.
文摘Homogeneous(unseeded)precipitation of magnesium carbonate hydrates by the reaction of MgCl2 with Na2CO3 in supersaturated solutions between 273 and 363K was investigated.The compositions,morphologies and filtration characteristics of the precipitates were studied in detail.The magnesium carbonate hydrates obtained at 313K and in the range of 343-363K showed good morphologies and filtration characteristics.Magnesium oxides(MgO)with high purity(97.6%-99.4%)were obtained by calcining magnesium carbonate hydrates at 1073K.
基金The authors would like to acknowledge the Analytical and Testing Center of Central South University to supply the facilities to fulfill the measurements. The authors also wish to express their thanks to the National Natural Science Foundation of China （No. 51474161） and Hunan Provincial Innovation Foundation for Postgraduate （CX2017B056） for the financial support of this research.
文摘Indian hematite fines are normally characterized by high iron grade and minor impurities, which are usually used for sinter fines. With macroscale operations technology of blast furnace in Indian, pellets, as a kind of high-quality materials, attract more and more attention. However, the hematite fines possess the coarse size. Hence, they inevitably need to be further finely ground for pelletizing before balling. The grinding behavior of Indian hematite fines was revealed by conducting the ball milling tests and determining the Bond ball mill work index （Wi）. The results show that Indian hematite fines have an excellent grindability with Wi of only 7.40-7.73 kWh/t, indicating that ball milling is an economically viable way to pretreat Indian hematite fines. Nonetheless, due to poor sedimentation and filtering properties of wet ground products, the dry ball milling is more appropriate to process Indian hematite fines. In addition, the superior quality green balls can be manufactured with dry ground products under the conditions of 0.5% bentonite dosage, 7.5% moisture and balling for 12 min, which further confirmed that the recommended pellet feed preparation technique is reasonable.
