Taking introduced trimolter varieties 853 Bai and 543B with stable moltinism as male parents, and tetrarnolter varieties 932, 7532, Furong, Xianghui with excellent comprehensive economic characters in current producti...Taking introduced trimolter varieties 853 Bai and 543B with stable moltinism as male parents, and tetrarnolter varieties 932, 7532, Furong, Xianghui with excellent comprehensive economic characters in current production as female parents, the trimolter varieties San, Long, Hui and Yuan with excellent compre- hensive economic characters and stable mohinism were bred using cross breeding and systematic breeding methods, and healthy trimoher four-way cross combination ＂San · Long × Hui · Yuan＂ （ Yuecanxixian No. 1 ） was assembled. Provincial laboratory and rural production and identification results showed that the variety had strong vitality, stable moltinism （trimolt rate over 98% ） and short duration; laboratory identification results were as follows： cocoon filament size 1. 853 dtex, cocoon filament length 1 146 m, reelability percentage 73.04%, neatness 95.38 points, strength 4.63 mN/dtex, elongation rate 23.3%, cohesion 116 times. The variety was approved by Guangdong Crop Variety Approval Committee in December 2010, which can be used as raw cocoon for reeling high-grade fine size raw silk.展开更多
In debris flow modelling,the viscosity and yield stress of fine-grained sediments should be determined in order to better characterize sediment flow.In particular,it is important to understand the effect of grain size...In debris flow modelling,the viscosity and yield stress of fine-grained sediments should be determined in order to better characterize sediment flow.In particular,it is important to understand the effect of grain size on the rheology of fine-grained sediments associated with yielding.When looking at the relationship between shear stress and shear rate before yielding,a high-viscosity zone(called pseudoNewtonian viscosity) towards the apparent yield stress exists.After yielding,plastic viscosity(called Bingham viscosity) governs the flow.To examine the effect of grain size on the rheological characteristics of fine-grained sediments,clay-rich materials(from the Adriatic Sea,Italy; Cambridge Fjord,Canada; and the Mediterranean Sea,Spain),silt-rich debris flow materials(from La Valette,France) and silt-rich materials(iron tailings from Canada) were compared.Rheological characteristics were examined using a modified Bingham model.The materials examined,including the Canadian inorganic and sensitive clays,exhibit typical shear thinning behavior and strong thixotropy.In the relationships between the liquidity index and rheological values(viscosity and apparent yield stress),the effect of grain size on viscosity and yield stress is significant at a given liquidity index.The viscosity and yield stress of debris flow materials are higher than those of low-activity clays at the same liquid state.However the viscosity and yield stress of the tailings,which are mainly composed of silt-sized particles,are slightly lower than those of low-activity clays.展开更多
The quantitative change and size distribution of particles in the effluents from a sand filter and a granular activated carbon （GAC） filter in a drinking water treatment plant were investigated. The average total co...The quantitative change and size distribution of particles in the effluents from a sand filter and a granular activated carbon （GAC） filter in a drinking water treatment plant were investigated. The average total concentration of particles in the sand filter effluent during a filter cycle was 148 particles/mL, 27 of which were larger than 2 μm in size. The concentration in the GAC effluent （561 particles/mL） was significantly greater than that in the sand filter effluent. The concentration of particles larger than 2 μm in the GAC filter effluent reached 201 particles/mL, with the amount of particles with sizes between 2 μm and 15 μm increasing. The most probable number （MPN） of carbon fines reached 43 unit/L after six hours and fines between 0.45 μm and 8.0 μm accounted for more than 50%. The total concentration of outflowing bacteria in the GAC filter effluent, 350 CFU （colony-forming units） /mL, was greater than that in the sand filter effluent, 210 CFU/mL. The desorbed bacteria concentration reached an average of 310 CFU/mg fines. The disinfection efficiency of desorbed bacteria was lower than 40% with 1.5 mg/L of chlorine. The disinfection effect showed that the inactivation rate with 2.0 mg/L of chloramine （90%） was higher than that with chlorine （70%）. Experimental results indicated that the high particle concentration in raw water and sedimentation effluent led to high levels of outflowing particles in the sand filter effluent. The activated carbon fines in the effluent accounted for a small proportion of the total particle amount, but the existing bacteria attached to carbon fines may influence the drinking water safety. The disinfection efficiency of desorbed bacteria was lower than that of free bacteria with chlorine, and the disinfection effect on bacteria attached to carbon fines with chloramine was better than that with only chlorine.展开更多
The temperature field and thermal cycling curve in the heat-affected zone during welding 400 MPa ultra fine grained steel by plasma arc were simulated using finite element method. The principle of grain growth kinetic...The temperature field and thermal cycling curve in the heat-affected zone during welding 400 MPa ultra fine grained steel by plasma arc were simulated using finite element method. The principle of grain growth kinetics was used to predict the grain size in the heat-affected zone under different welding parameters. The simulation results show that the growing tendency of HAZ grain could be controlled by adjusting the welding parameters, but the growth of HAZ grain could not be eliminated at all. The HAZ grain size became small with increasing of the cooling rate and added with increasing of welding current, arc voltage and welding speed.展开更多
As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to ...As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles(nanobubbles and microbubbles) on the flotation of fine( 38 + 14.36 lm) and ultrafine( 14.36 + 5 lm) chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nanomicrobubble generator based on the cavitation phenomenon in Venturi tubes. In order to better understand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nanobubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16–21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles( 14.36 + 5 lm) more than that of fine particles( 38 + 14.36 lm). Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%,respectively.展开更多
基金Supported by the Seventh Batch of Development Project of National Silk Development Risk Fund(GJXB[2007]No.36)Science and Technology Infrastructure Construction Project of Guangdong Province(2007B060401090YKCZ[2009]No.190)
文摘Taking introduced trimolter varieties 853 Bai and 543B with stable moltinism as male parents, and tetrarnolter varieties 932, 7532, Furong, Xianghui with excellent comprehensive economic characters in current production as female parents, the trimolter varieties San, Long, Hui and Yuan with excellent compre- hensive economic characters and stable mohinism were bred using cross breeding and systematic breeding methods, and healthy trimoher four-way cross combination ＂San · Long × Hui · Yuan＂ （ Yuecanxixian No. 1 ） was assembled. Provincial laboratory and rural production and identification results showed that the variety had strong vitality, stable moltinism （trimolt rate over 98% ） and short duration; laboratory identification results were as follows： cocoon filament size 1. 853 dtex, cocoon filament length 1 146 m, reelability percentage 73.04%, neatness 95.38 points, strength 4.63 mN/dtex, elongation rate 23.3%, cohesion 116 times. The variety was approved by Guangdong Crop Variety Approval Committee in December 2010, which can be used as raw cocoon for reeling high-grade fine size raw silk.
基金funded by the Natural Sciences and Engineering Research Council,Canada,via the COSTA(Continental Slope Stability)-Canada projectsupported by the Public Welfare & Safety Research Program through the National Research Foundation of Korea(NRF)+1 种基金funded by the Ministry of Science,ICT&Future Planning(Grant No.2012M3A2A1050983)the Research Project (11-7622,13-3212)of the Korea Institute of Geoscience and Mineral Resources(KIGAM)
文摘In debris flow modelling,the viscosity and yield stress of fine-grained sediments should be determined in order to better characterize sediment flow.In particular,it is important to understand the effect of grain size on the rheology of fine-grained sediments associated with yielding.When looking at the relationship between shear stress and shear rate before yielding,a high-viscosity zone(called pseudoNewtonian viscosity) towards the apparent yield stress exists.After yielding,plastic viscosity(called Bingham viscosity) governs the flow.To examine the effect of grain size on the rheological characteristics of fine-grained sediments,clay-rich materials(from the Adriatic Sea,Italy; Cambridge Fjord,Canada; and the Mediterranean Sea,Spain),silt-rich debris flow materials(from La Valette,France) and silt-rich materials(iron tailings from Canada) were compared.Rheological characteristics were examined using a modified Bingham model.The materials examined,including the Canadian inorganic and sensitive clays,exhibit typical shear thinning behavior and strong thixotropy.In the relationships between the liquidity index and rheological values(viscosity and apparent yield stress),the effect of grain size on viscosity and yield stress is significant at a given liquidity index.The viscosity and yield stress of debris flow materials are higher than those of low-activity clays at the same liquid state.However the viscosity and yield stress of the tailings,which are mainly composed of silt-sized particles,are slightly lower than those of low-activity clays.
基金supported by the National Natural Science Foundation of China (Grant No 50638020)the National Key High-Tech Program (863) of China (Grant No 2006AA06Z311)the Natural Science Foundation of Jiangsu Province (Grant No BK2006170)
文摘The quantitative change and size distribution of particles in the effluents from a sand filter and a granular activated carbon （GAC） filter in a drinking water treatment plant were investigated. The average total concentration of particles in the sand filter effluent during a filter cycle was 148 particles/mL, 27 of which were larger than 2 μm in size. The concentration in the GAC effluent （561 particles/mL） was significantly greater than that in the sand filter effluent. The concentration of particles larger than 2 μm in the GAC filter effluent reached 201 particles/mL, with the amount of particles with sizes between 2 μm and 15 μm increasing. The most probable number （MPN） of carbon fines reached 43 unit/L after six hours and fines between 0.45 μm and 8.0 μm accounted for more than 50%. The total concentration of outflowing bacteria in the GAC filter effluent, 350 CFU （colony-forming units） /mL, was greater than that in the sand filter effluent, 210 CFU/mL. The desorbed bacteria concentration reached an average of 310 CFU/mg fines. The disinfection efficiency of desorbed bacteria was lower than 40% with 1.5 mg/L of chlorine. The disinfection effect showed that the inactivation rate with 2.0 mg/L of chloramine （90%） was higher than that with chlorine （70%）. Experimental results indicated that the high particle concentration in raw water and sedimentation effluent led to high levels of outflowing particles in the sand filter effluent. The activated carbon fines in the effluent accounted for a small proportion of the total particle amount, but the existing bacteria attached to carbon fines may influence the drinking water safety. The disinfection efficiency of desorbed bacteria was lower than that of free bacteria with chlorine, and the disinfection effect on bacteria attached to carbon fines with chloramine was better than that with only chlorine.
文摘The temperature field and thermal cycling curve in the heat-affected zone during welding 400 MPa ultra fine grained steel by plasma arc were simulated using finite element method. The principle of grain growth kinetics was used to predict the grain size in the heat-affected zone under different welding parameters. The simulation results show that the growing tendency of HAZ grain could be controlled by adjusting the welding parameters, but the growth of HAZ grain could not be eliminated at all. The HAZ grain size became small with increasing of the cooling rate and added with increasing of welding current, arc voltage and welding speed.
基金the Tarbiat Modares University (TMU), the Iran Mineral Processing Research Center (IMPRC) and the IMIDRO for the technical assistance and financial support
文摘As is well known to mineral processing scientists and engineers, fine and ultrafine particles are difficult to float mainly due to the low bubble-particle collision efficiencies. Though many efforts have been made to improve flotation performance of fine and ultrafine particles, there is still much more to be done. In this paper, the effects of nano-microbubbles(nanobubbles and microbubbles) on the flotation of fine( 38 + 14.36 lm) and ultrafine( 14.36 + 5 lm) chalcopyrite particles were investigated in a laboratory scale Denver flotation cell. Nano-microbubbles were generated using a specially-designed nanomicrobubble generator based on the cavitation phenomenon in Venturi tubes. In order to better understand the mechanisms of nano-microbubble enhanced froth flotation of fine and ultrafine chalcopyrite particles, the nano-microbubble size distribution, stability and the effect of frother concentration on nanobubble size were also studied by a laser diffraction method. Comparative flotation tests were performed in the presence and absence of nano-microbubbles to evaluate their impact on the fine and ultrafine chalcopyrite particle flotation recovery. According to the results, the mean size of nano-microbubbles increased over time, and decreased with increase of frother concentration. The laboratory-scale flotation test results indicated that flotation recovery of chalcopyrite fine and ultrafine particles increased by approximately 16–21% in the presence of nano-microbubbles, depending on operating conditions of the process. The presence of nano-microbubbles increased the recovery of ultrafine particles( 14.36 + 5 lm) more than that of fine particles( 38 + 14.36 lm). Another major advantage is that the use of nano-microbubbles reduced the collector and frother consumptions by up to 75% and 50%,respectively.
基金Project（2016zztsl03） supported by the Fundamental Research Funds for the Central Universities, China Project（51374249） supported by the National Natural Science Foundation of China+1 种基金 Project（2015BAB12B02） supported by the National Key Technology R＆D Program of China Project（2013B090800016） supported by Guangdong Provincial Science and Technology Plan, China
