Fine Geological Radar Processing and Interpretation

Geological radar probing technology finds wide application in engineering projects. The high-precision characteristics of geologic radar should be studied in connection with fine processing and interpretation. This article discusses such issues as (1) geologic radar noise source and (2) fine processing and interpretation of radar data. It is focused on how to achieve fine processing and interpretation.

Coal waste management practices in the USA:an overview

This paper provides an overview of coal waste management practices with two case studies and an estimate of management cost in 2010 US dollars.Processing of as-mined coal typically results in considerable amount of coarse and fine coal processing wastes because of in-seam and out-of-seam dilution mining.Processing plant clean coal recovery values run typically 50%-80%.Trace metals and sulfur may be present in waste materials that may result in leachate water with corrosive characteristics.Water discharges may require special measures such as liner and collection systems,and treatment to neutralize acid drainage and/or water quality for trace elements.The potential for variations in coal waste production and quality depends upon mining or processing,plus the long-term methods of waste placement.The changes in waste generation rates and engineering properties of the coal waste during the life of the facility must be considered.Safe,economical and environmentally acceptable management of coal waste involves consideration of geology,soil and rock mechanics,hydrology,hydraulics,geochemistry,soil science,agronomy and environmental sciences.These support all aspects of the regulatory environment including the design and construction of earth and rock embankments and dams,as well as a wide variety of waste disposal structures.Development of impoundments is critical and require considerations of typical water-impounding dams and additional requirements of coal waste disposal impoundments.The primary purpose of a coal waste disposal facility is to dispose of unusable waste materials from mining.However,at some sites coal waste impoundments serve to provide water storage capacity for processing and flood attenuation.

Fine analysis on advanced detection of transient electromagnetic method

Fault fracture zones and water-bearing bodies in front of the driving head are the main disasters in mine laneways,thus it is important to perform their advanced detection and prediction in advance in order to provide reliable technical support for the excavation.Based on the electromagnetic induction theory,we analyzed the characteristics of primary and secondary fields with a positive and negative wave form of current,proposed the fine processing of the advanced detection with variation rate of apparent resistivity and introduced in detail the computational formulae and procedures.The result of physical simulation experiments illustrate that the tectonic interface of modules can be judged by first-order rate of apparent resistivity with a boundary error of 5%,and the position of water body determined by the fine analysis method agrees well with the result of borehole drilling.This shows that in terms of distinguishing structure and aqueous anomalies,the first-order rate of apparent resistivity is more sensitive than the secondorder rate of apparent resistivity.However,some remaining problems are suggested for future solutions.

Preparation of Strontium Bismuth Tantalum (SBT) Fine Powder by Sol-Gel Process Using Bismuth Subnitrate as Bismuth Source

Strontium bismuth tantalum (SBT) fine power was prepared by Sol-Gel method. Pentaethoxy tantalum, strontium acetate and bismuth subnitrate were used as raw materials, and were dissolved in proper order in ethylene glycol to form transparent sol. The mixed precursor was dried at 80℃ and annealed at 800℃ for 1 h. Crystallized nanometer sized SBT fine powder was obtained and characterized by XRD.