针对飞机结冰情况下的冰孔隙率测量问题,提出并评估了一种基于动态小波指纹技术的超声波孔隙率测量方法。通过理论模型和有限元仿真分析了超声纵波的传播过程,阐述了孔隙大小等因素对孔隙率测量的影响机理。结合20块冰样品的60组超声波...针对飞机结冰情况下的冰孔隙率测量问题,提出并评估了一种基于动态小波指纹技术的超声波孔隙率测量方法。通过理论模型和有限元仿真分析了超声纵波的传播过程,阐述了孔隙大小等因素对孔隙率测量的影响机理。结合20块冰样品的60组超声波测量数据,生成了小波指纹图像,并提取了11维关键特征。基于主成分分析和多项式拟合,所实现的孔隙率测量均方根误差(Root mean square error,RMSE)达到1.144%,说明本文方法比传统的峰值拟合方法更稳定、准确。展开更多
Fingerprints are unique and life-long to everyone, so they occupy very important statuses in forensic science. However, due to the limit of current imaging technologies and instruments, recognition and matching of fin...Fingerprints are unique and life-long to everyone, so they occupy very important statuses in forensic science. However, due to the limit of current imaging technologies and instruments, recognition and matching of fingerprints are mostly based on their level 2 structures（bifurcation, crossover, and etc.）.Moreover, in real-world cases, fingerprints collected in the field are often incomplete or damaged, which adds further difficulty in fingerprint analysis. Quantum dots（QDs） are superior fluorescent imaging agents for latent fingerprints, which can provide both level 2 and level 3（sweat pores） details. Here, we used red-emitting N-acetylcysteine-capped Cd Te QDs as imaging agent for staining of eccrine LFPs. The numbers of level 2 and level 3 features that can be mapped are significantly larger than those obtained by cyanoacrylate fuming, a standard technique being adopted at forensic scene. Therefore, the level 2 and level 3 characteristics from QD-staining were simultaneously extracted for improved fingerprint analysis.A preliminary fingerprint matching based modified Pore Matching algorithm was thus developed based on the integration of both level 2 and level 3 characteristics. Satisfactory results of fingerprint matching were obtained, demonstrating the advantage of the QD-staining for advanced fingerprint analysis.展开更多
In the present communication,various fluxes blended Y2 O3：Eu3＋（5 mol%） nanopowders（NPs） were successfully fabricated by solution combustion method.PXRD pattern confirms body-centered cubic structure of the prepa...In the present communication,various fluxes blended Y2 O3：Eu3＋（5 mol%） nanopowders（NPs） were successfully fabricated by solution combustion method.PXRD pattern confirms body-centered cubic structure of the prepared samples.Energy band gap（Eg） of the fabricated products was estimated and is found to be in the range of 3.13-3.32 eV.Photoluminescence（PL） emission spectra exhibit sharp and intense peaks at ～579,592,614,657,704 nm corresponding to 5 D0→7 FJ（J = 0,1,2,3 and 4） transitions of Eu3＋ ions.Significance of fluxes for enhancing the PL emissions was extensively studied.Photometric studies of the prepared samples are located in pure red region.Optimized NPs were explored as a novel sensing agent for visualization of latent fingerprints（LFPs） on various surfaces including porous,semiporous and non-porous surfaces followed by powder dusting technique.Various experiments including aging,temperature,scratching and aquatic fresh water treatment tests were performed to evaluate applicability of the fabricated NPs.Visualized LFPs exhibit well defined ridge details including most authenticated sweat pores are also revealed with high sensitivity,selectivity,little background hindrance and less toxicity.Aforementioned results evidence that the method and fabricated NPs can be considered to be simple,rapid and economical and provide novel sensing platform for LFPs visualization in prospective forensic applications.展开更多
基金funded by the Key Laboratory of Icing and Anti/De-icing of CARDC(No.IADL 20210202)。
文摘针对飞机结冰情况下的冰孔隙率测量问题,提出并评估了一种基于动态小波指纹技术的超声波孔隙率测量方法。通过理论模型和有限元仿真分析了超声纵波的传播过程,阐述了孔隙大小等因素对孔隙率测量的影响机理。结合20块冰样品的60组超声波测量数据,生成了小波指纹图像,并提取了11维关键特征。基于主成分分析和多项式拟合,所实现的孔隙率测量均方根误差(Root mean square error,RMSE)达到1.144%,说明本文方法比传统的峰值拟合方法更稳定、准确。
基金supported by the National Natural Science Foundation of China (Nos. 21475090 and 21522505)
文摘Fingerprints are unique and life-long to everyone, so they occupy very important statuses in forensic science. However, due to the limit of current imaging technologies and instruments, recognition and matching of fingerprints are mostly based on their level 2 structures（bifurcation, crossover, and etc.）.Moreover, in real-world cases, fingerprints collected in the field are often incomplete or damaged, which adds further difficulty in fingerprint analysis. Quantum dots（QDs） are superior fluorescent imaging agents for latent fingerprints, which can provide both level 2 and level 3（sweat pores） details. Here, we used red-emitting N-acetylcysteine-capped Cd Te QDs as imaging agent for staining of eccrine LFPs. The numbers of level 2 and level 3 features that can be mapped are significantly larger than those obtained by cyanoacrylate fuming, a standard technique being adopted at forensic scene. Therefore, the level 2 and level 3 characteristics from QD-staining were simultaneously extracted for improved fingerprint analysis.A preliminary fingerprint matching based modified Pore Matching algorithm was thus developed based on the integration of both level 2 and level 3 characteristics. Satisfactory results of fingerprint matching were obtained, demonstrating the advantage of the QD-staining for advanced fingerprint analysis.
基金Project supported by the Vision Group of Science and Technology(VGST),Karnataka(VGST/KFIST L-1/2016-17/GRD-489)
文摘In the present communication,various fluxes blended Y2 O3：Eu3＋（5 mol%） nanopowders（NPs） were successfully fabricated by solution combustion method.PXRD pattern confirms body-centered cubic structure of the prepared samples.Energy band gap（Eg） of the fabricated products was estimated and is found to be in the range of 3.13-3.32 eV.Photoluminescence（PL） emission spectra exhibit sharp and intense peaks at ～579,592,614,657,704 nm corresponding to 5 D0→7 FJ（J = 0,1,2,3 and 4） transitions of Eu3＋ ions.Significance of fluxes for enhancing the PL emissions was extensively studied.Photometric studies of the prepared samples are located in pure red region.Optimized NPs were explored as a novel sensing agent for visualization of latent fingerprints（LFPs） on various surfaces including porous,semiporous and non-porous surfaces followed by powder dusting technique.Various experiments including aging,temperature,scratching and aquatic fresh water treatment tests were performed to evaluate applicability of the fabricated NPs.Visualized LFPs exhibit well defined ridge details including most authenticated sweat pores are also revealed with high sensitivity,selectivity,little background hindrance and less toxicity.Aforementioned results evidence that the method and fabricated NPs can be considered to be simple,rapid and economical and provide novel sensing platform for LFPs visualization in prospective forensic applications.
