For the sake of a more accurate shell boundary and calculation of radiation heat transfer in the Directional Solidification(DS) process, a radiation heat transfer model based on the Finite Element Method(FEM)is develo...For the sake of a more accurate shell boundary and calculation of radiation heat transfer in the Directional Solidification(DS) process, a radiation heat transfer model based on the Finite Element Method(FEM)is developed in this study. Key technologies, such as distinguishing boundaries automatically, local matrix and lumped heat capacity matrix, are also stated. In order to analyze the effect of withdrawing rate on DS process,the solidification processes of a complex superalloy turbine blade in the High Rate Solidification(HRS) process with different withdrawing rates are simulated; and by comparing the simulation results, it is found that the most suitable withdrawing rate is determined to be 5.0 mm·min^(-1). Finally, the accuracy and reliability of the radiation heat transfer model are verified, because of the accordance of simulation results with practical process.展开更多
Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method ar...Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method are adopted to quantify the effects of lateral heterogeneity caused by material parameters and fault dip angle on the co- and postseismic deformation in the near- and far-field. Our results show that： 1） the medium＇s lateral heterogeneity does affect the co-seismic deformation, with the effects increasing with the medium＇s lateral heterogeneity caused by material parameters; 2） the Lame parameters play a more dominant role than density in the effects caused by lateral heterogeneity; 3） when a fault＇s dip angle is smaller than 90, the effects of the medium＇s lateral heterogeneity on the hanging wall are greater than on the footwall; 4） the impact of lateral heterogeneity caused by the viscosity coefficient on the post-seismic deformation can affect a large area, including the near- and far-field.展开更多
基金financially supported by the Program for New Century Excellent Talents in University(No.NCET-13-0229,NCET-09-0396)the National Science & Technology Key Projects of Numerical Control(No.2012ZX04010-031,2012ZX0412-011)the National High Technology Research and Development Program("863"Program)of China(No.2013031003)
文摘For the sake of a more accurate shell boundary and calculation of radiation heat transfer in the Directional Solidification(DS) process, a radiation heat transfer model based on the Finite Element Method(FEM)is developed in this study. Key technologies, such as distinguishing boundaries automatically, local matrix and lumped heat capacity matrix, are also stated. In order to analyze the effect of withdrawing rate on DS process,the solidification processes of a complex superalloy turbine blade in the High Rate Solidification(HRS) process with different withdrawing rates are simulated; and by comparing the simulation results, it is found that the most suitable withdrawing rate is determined to be 5.0 mm·min^(-1). Finally, the accuracy and reliability of the radiation heat transfer model are verified, because of the accordance of simulation results with practical process.
基金co-supported by the National Natural Science Foundation of China (41431069)the State Key Development Program for Basic Research of China (2013CB733304, 2013CB733303)+1 种基金the Doctoral Fund of Ministry of Education of China (20110141130010)China Postdoctoral Science Foundation funded project (2013M542062)
文摘Many studies revealed that the Earth medium＇s lateral heterogeneity can cause considerable effects on the co- and post-seismic deformation field. In this study, the threedimensional finite element numerical method are adopted to quantify the effects of lateral heterogeneity caused by material parameters and fault dip angle on the co- and postseismic deformation in the near- and far-field. Our results show that： 1） the medium＇s lateral heterogeneity does affect the co-seismic deformation, with the effects increasing with the medium＇s lateral heterogeneity caused by material parameters; 2） the Lame parameters play a more dominant role than density in the effects caused by lateral heterogeneity; 3） when a fault＇s dip angle is smaller than 90, the effects of the medium＇s lateral heterogeneity on the hanging wall are greater than on the footwall; 4） the impact of lateral heterogeneity caused by the viscosity coefficient on the post-seismic deformation can affect a large area, including the near- and far-field.
