Finite cell method compared to h-version finite element method for elasto-plastic problems

The finite cell method （FCM） combines the high-order finite element method （FEM） with the fictitious domain approach for the purpose of simple meshing. In the present study, the FCM is used to the Prandtl-Reuss flow theory of plasticity, and the results are compared with the h-version finite element method （h-FEM）. The numerical results show that the FCM is more efficient compared to the h-FEM for elasto-plastic problems, although the mesh does not conform to the boundary. It is also demonstrated that the FCM performs well for elasto-plastic loading and unloading.

Shape optimization of axisymmetric solids with the finite cell method using a fixed grid

In this work, a design procedure extending the B-spline based finite cell method into shape optimization is developed for axisymmetric solids involving the centrifugal force effect. We first replace the traditional conforming mesh in the finite element method with structured cells that are fixed during the whole design process with a view to avoid the sophisticated re-meshing and eventual mesh distortion.Then, B-spline shape functions are further implemented to yield a high-order continuity field along the cell boundary in stress analysis. By means of the implicit description of the shape boundary, stress sensitivity is analytically derived with respect to shape design variables. Finally, we illustrate the efficiency and accuracy of the proposed protocol by several numerical test cases as well as a whole design procedure carried out on an aeronautic turbine disk.

TAILORED FINITE CELL METHOD FOR SOLVING HELMHOLTZ EQUATION IN LAYERED HETEROGENEOUS MEDIUM

In this paper, we propose a tailored finite cell method for the computation of two- dimensional Helmholtz equation in layered heterogeneous medium. The idea underlying the method is to construct a numerical scheme based on a local approximation of the solution to Helmholtz equation. This provides a computational tool of achieving high accuracy with coarse mesh even for large wave number （high frequency）. The stability analysis and error estimates of this method are also proved. We present several numerical results to show its efficiency and accuracy.

A Cell-Based Linear Smoothed Finite Element Method for Polygonal Topology Optimization

The aim of this work is to employ a modified cell-based smoothed finite element method(S-FEM)for topology optimization with the domain discretized with arbitrary polygons.In the present work,the linear polynomial basis function is used as the weight function instead of the constant weight function used in the standard S-FEM.This improves the accuracy and yields an optimal convergence rate.The gradients are smoothed over each smoothing domain,then used to compute the stiffness matrix.Within the proposed scheme,an optimum topology procedure is conducted over the smoothing domains.Structural materials are distributed over each smoothing domain and the filtering scheme relies on the smoothing domain.Numerical tests are carried out to pursue the performance of the proposed optimization by comparing convergence,efficiency and accuracy.

Modeling of interphases in multiple heterogeneities reinforced composites using Voronoi cell finite elements

In this paper,a Voronoi cell finite element model is developed to study the microscopic and macroscopic mechanical behaviors of heterogenous materials,including arbitrary distributed heterogeneity(inclusions or fibers)coated with interphase layers,based on linear elasticity theory.The interphase between heterogeneity and a matrix are regarded as in the third phase(elastic layers),in contrast to the perfect interface of the spring-like Voronoi cell finite element model(VCFEM)in the literature.In this model,both stress and the displacement field are assumed to be independent in an element.Formulations of stress are derived for each of the three phases in an element,as is the type of functional.Numerical examples were used to study the microscopic and macroscopic properties,such as the effective modulus,of the composites.The results of the proposed VCFEM were compared with analytical solution and numerical results obtained from a standard finite element analysis to confirm its effectiveness.

Numerical simulation of thermo-mechanical fatigue properties for particulate reinforced composites

In this paper, a two dimensional Voronoi cell element, formulated with creep, thermal and plastic strain, is applied for the numerical simulation of thermo-mechanical fatigue behavior for particulate reinforced composites. The relation between mechanical fatigue phases and thermal fatigue phases influences the thermo-mechanical fatigue behavior and cyclic creep damage. The topological features of micro-structure in particulate reinforced composites, such as the orientation, depth-width ratio, distribution and volume fraction of inclusions, have a great influence on thermo-mechanical behavior. Some related conclusions are obtained by examples of numerical simulation.

Design of the sample cell in near-field surface-enhanced Raman scattering by finite difference time domain method

The rational design of the sample cell may improve the sensitivity of surface-enhanced Raman scattering （SERS） detection in a high degree. Finite difference time domain （FDTD） simulations of the configuration of Ag film-Ag particles illuminated by plane wave and evanescent wave are performed to provide physical insight for design of the sample cell. Numerical solutions indicate that the sample cell can provide more ＂hot spots＂ and the massive field intensity enhancement occurs in these ＂hot spots＂. More information on the nanometer character of the sample can be got because of gradient-field Raman （GFR） of evanescent wave. OCIS codes： 290.5860, 240.0310, 240.6680, 999.9999 （surface-enhanced Raman scattering）.

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell（RUC）is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element（DFE）method,and merely applying Periodic Displacement Boundary Conditions（PDBCs）to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions（PTBCs,also known as traction continuity conditions）are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element（FE）analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional（UD）fiber-reinforced composites.

Study on seismic numerical model on the Chinese mainland and its vicinity

This paper presents the stress incremental rate of each element by using finite element numerical simulation way.Combined with the practical continent boundary condition and medium parameters, this paper applies the stress increment rate to the more practical modified cell automaton model according to the cell automaton principle. The paper preliminarily gives the more practical seismic space-time repeated evolutive maps, and compares the imitative seismic energy release with the real seismic energy release. It is thought that this model has its advantageover the old one whether in the seismic imitative characteristics or in the comparison with the realsituation and is more practical model.