A New Elasticity and Finite Element Formulation for Different Young's Modulus When Tension and Compression Loadings

This paper presents a new elasticity and finite element formulation for different Young's modulus when tension and compression loadings in anisotropy media. The case studies, such as anisotropy and isotropy, were investigated. A numerical example was shown to find out the changes of neutral axis at the pure bending beams.

A STABILIZED MIXED FINITE ELEMENT FORMULATION FOR THE NON-STATIONARY INCOMPRESSIBLE BOUSSINESQ EQUATIONS

In this study, we employ mixed finite element （MFE） method, two local Gauss integrals, and parameter-free to establish a stabilized MFE formulation for the non-stationary incompressible Boussinesq equations. We also provide the theoretical analysis of the existence, uniqueness, stability, and convergence of the stabilized MFE solutions for the stabilized MFE formulation.

A STABILIZED CRANK-NICOLSON MIXED FINITE VOLUME ELEMENT FORMULATION FOR THE NON-STATIONARY PARABOLIZED NAVIER-STOKES EQUATIONS

A time semi-discrete Crank-Nicolson （CN） formulation with second-order time accuracy for the non-stationary parabolized Navier-Stokes equations is firstly established. And then, a fully discrete stabilized CN mixed finite volume element （SCNMFVE） formu- lation based on two local Gaussian integrals and parameter-free with the second-order time accuracy is established directly from the time semi-discrete CN formulation so that it could avoid the discussion for semi-discrete SCNMFVE formulation with respect to spatial wriables and its theoretical analysis becomes very simple. Finally, the error estimates of SCNMFVE solutions are provided.

A FINITE ELEMENT ANALYSIS OF THE LARGE PLASTIC DEFORMATION BEHAVIOR OF AMORPHOUS GLASSY CIRCULAR POLYMERIC BARS

The BPA eight-chain molecular network model is introduced into the finite element formulation of elastic-plastic large deformation. And then, the tensile deformation localization development of the amorphous glassy circular polymeric bars (such as polycarbonates) is numerically simulated. The simulated results are compared with experimental ones, and very good consistence between numerical simulation and experiment is obtained, which shows the efficiency of the finite element analysis. Finally, the influences of the microstructure parameter S-ss on tensile neck-propagation and triaxial stress effect are studied.

A REDUCED MFE FORMULATION BASED ON POD FOR THE NON-STATIONARY CONDUCTION-CONVECTION PROBLEMS

In this article, a reduced mixed finite element （MFE） formulation based on proper orthogonal decomposition （POD） for the non-stationary conduction-convection problems is presented. Also the error estimates between the reduced MFE solutions based on POD and usual MFE solutions are derived. It is shown by numerical examples that the results of numerical computation are consistent with theoretical conclusions. Moreover, it is shown that the reduced MFE formulation based on POD is feasible and efficient in finding numerical solutions for the non-stationary conduction-convection problems.

A REDUCED FE FORMULATION BASED ON POD METHOD FOR HYPERBOLIC EQUATIONS

A proper orthogonal decomposition（POD） method was successfully used in the reduced-order modeling of complex systems.In this paper,we extend the applications of POD method,namely,apply POD method to a classical finite element（FE） formulation for second-order hyperbolic equations with real practical applied background,establish a reduced FE formulation with lower dimensions and high enough accuracy,and provide the error estimates between the reduced FE solutions and the classical FE solutions and the implementation of algorithm for solving reduced FE formulation so as to provide scientific theoretic basis for service applications.Some numerical examples illustrate the fact that the results of numerical computation are consistent with theoretical conclusions.Moreover,it is shown that the reduced FE formulation based on POD method is feasible and efficient for solving FE formulation for second-order hyperbolic equations.

A REDUCED-ORDER MFE FORMULATION BASED ON POD METHOD FOR PARABOLIC EQUATIONS

In this paper, we extend the applications of proper orthogonal decomposition （POD） method, i.e., apply POD method to a mixed finite element （MFE） formulation naturally satisfied Brezz-Babu^ka for parabolic equations, establish a reduced-order MFE formulation with lower dimensions and sufficiently high accuracy, and provide the error estimates between the reduced-order POD MFE solutions and the classical MFE solutions and the implementation of algorithm for solving reduced-order MFE formulation. Some numerical examples illustrate the fact that the results of numerical computation are consis- tent with theoretical conclusions. Moreover, it is shown that the new reduced-order MFE formulation based on POD method is feasible and efficient for solving MFE formulation for parabolic equations.

A POD REDUCED-ORDER SPDMFE EXTRAPOLATING ALGORITHM FOR HYPERBOLIC EQUATIONS

In this article, a proper orthogonal decomposition （POD） method is used to study a classical splitting positive definite mixed finite element （SPDMFE） formulation for second- order hyperbolic equations. A POD reduced-order SPDMFE extrapolating algorithm with lower dimensions and sufficiently high accuracy is established for second-order hyperbolic equations. The error estimates between the classical SPDMFE solutions and the reduced-order SPDMFE solutions obtained from the POD reduced-order SPDMFE extrapolating algorithm are provided. The implementation for solving the POD reduced-order SPDMFE extrapolating algorithm is given. Some numerical experiments are presented illustrating that the results of numerical computation are consistent with theoretical conclusions, thus validating that the POD reduced-order SPDMFE extrapolating algorithm is feasible and efficient for solving second-order hyperbolic equations.

A Stabilized Crank-Nicolson Mixed Finite Element Method for Non-stationary Parabolized Navier-Stokes Equations

In this study, a time semi-discrete Crank-Nicolson （CN） formulation with second-order time accu- racy for the non-stationary parabolized Navier-Stokes equations is firstly established. And then, a fully discrete stabilized CN mixed finite element （SCNMFE） formulation based on two local Gauss integrals and parameter- free with the second-order time accuracy is established directly from the time semi-discrete CN formulation. Thus, it could avoid the discussion for semi-discrete SCNMFE formulation with respect to spatial variables and its theoretical analysis becomes very simple. Finaly, the error estimates of SCNMFE solutions are provided.

Geometric nonlinear analysis of large rotation behavior of a curved SWCNT

Nanotubes form clusters and are found in curved bundles in nano-tube films and nanocomposites.Separation phenomenon is sus-pected to occur in these curved bundles.In this study,the deformation of a single-wall carbon nanotube(SWCNT)interacting with curved bundle nanotubes is analyzed.It is assumed that the bundle is rigid and only van der Waals force acts between the nanotube and the bundle of nanotubes.A new method of model-ing geometric nonlinear behavior of the nanotube due to finite rotation and the corresponding van der Waals force is developed using co-rotational finite element method(CFEM)formulation,combined with small deformation beam theory,with the inclusion of axial force.Current developed CFEM method overcomes the limitation of linear Finite Element Method(FEM)formulation regarding large rotations and deformations of carbon nanotubes.This study provides a numerical tool to identify the critical curvature influence on the interaction of carbon nanotubes due to van der Waals forces and can provide more insight into studying irregula-rities in the electronic transport properties of adsorbed nanotubes in nanocomposites.

Micro-Differential Boundary Conditions Modelling the Absorption of Acoustic Waves by 2D Arbitrarily-Shaped Convex Surfaces

We propose a new Absorbing Boundary Condition(ABC)for the acoustic wave equation which is derived from a micro-local diagonalization process formerly defined by M.E.Taylor and which does not depend on the geometry of the surface bearing the ABC.By considering the principal symbol of the wave equation both in the hyperbolic and the elliptic regions,we show that a second-order ABC can be constructed as the combination of an existing first-order ABC and a Fourier-Robin condition.We compare the new ABC with other ABCs and we show that it performs well in simple configurations and that it improves the accuracy of the numerical solution without increasing the computational burden.