Heat dissipation enhancement method for finned heat sink for AGV motor driver's IGBT module

With the widespread use of high-power and highly integrated insulated gate bipolar transistor(IGBT),their cooling methods have become challenging.This paper proposes a liquid cooling scheme for heavy-duty automated guided vehicle(AGV)motor driver in port environment,and improves heat dissipation by analyzing and optimizing the core component of finned heat sink.Firstly,the temperature distribution of the initial scheme is studied by using Fluent software,and the heat transfer characteristics of the finned heat sink are obtained through numerical analysis.Secondly,an orthogonal test is designed and combined with the response surface methodology to optimize the structural parameters of the finned heat sink,resulting in a 14.57%increase in the heat dissipation effect.Finally,the effectiveness of heat dissipation enhancement is verified.This work provides valuable insights into improving the heat dissipation of IGBT modules and heat sinks,and provides guidance for their future applications.

Finned Zn-MFI zeolite encapsulated noble metal nanoparticle catalysts for the oxidative dehydrogenation of propane with carbon dioxide

Oxidative dehydrogenation of propane with carbon dioxide(CO_(2)-ODP)characterizes the tandem dehydrogenation of propane to propylene with the reduction of the greenhouse gas of CO_(2)to valuable CO.However,the existing catalyst is limited due to the poor activity and stability,which hinders its industrialization.Herein,we design the finned Zn-MFI zeolite encapsulated noble metal nanoparticles(NPs)as bifunctional catalysts(NPs@Zn-MFI)for CO_(2)-ODP.Characterization results reveal that the Zn2+species are coordinated with the MFI zeolite matrix as isolated cations and the NPs of Pt,Rh,or Rh Pt are highly dispersed in the zeolite crystals.The isolated Zn2+cations are very effective for activating the propane and the small NPs are favorable for activating the CO_(2),which synergistically promote the selective transformation of propane and CO_(2)to propylene and CO.As a result,the optimal 0.25%Rh0.50%Pt@Zn-MFI catalyst shows the best propylene yield,satisfactory CO_(2)conversion,and long-term stability.Moreover,considering the tunable synergetic effects between the isolated cations and NPs,the developed approach offers a general guideline to design more efficient CO_(2)-ODP catalysts,which is validated by the improved performance of the bifunctional catalysts via simply substituting Sn4+cations for Zn2+cations in the MFI zeolite matrix.

Localized Theoretical Analysis of Thermal Performance of Individually Finned Heat Pipe Heat Exchanger for Air Conditioning with Freon R404A as Working Fluid

This work contributes to the improvement of energy-saving in air conditioning systems. The objective is to apply the thermal efficiency of heat exchangers for localized determination of the thermal performance of heat exchangers with individually finned heat pipes. The fundamental parameters used for performance analysis were the number of fins per heat pipe, the number of heat pipes, the inlet temperatures, and the flow rates of hot and cold fluids. The heat exchanger under analysis uses Freon 404A as a working fluid in an air conditioning system for cooling in the Evaporator and energy recovery in the Condenser. The theoretical model is localized and applied individually to the Evaporator, Condenser, and heat exchanger regions. The results obtained through the simulation are compared with experimental results that use a global approach for the heat exchanger. The thermal quantities obtained through the theoretical model in the mentioned regions are air velocity, Nusselt number, thermal effectiveness, heat transfer rate, and outlet temperature. The comparisons made with global experimental results are in excellent agreement, demonstrating that the localized theoretical approach developed is consistent and can be used as a comprehensive analysis tool for heat exchangers using heat pipes.

Localized Theoretical Analysis of Thermal Performance of Individually Finned Heat Pipe Heat Exchanger for Air Conditioning with Freon R404A as Working Fluid

This work contributes to the improvement of energy-saving in air conditioning systems. The objective is to apply the thermal efficiency of heat exchangers for localized determination of the thermal performance of heat exchangers with individually finned heat pipes. The fundamental parameters used for performance analysis were the number of fins per heat pipe, the number of heat pipes, the inlet temperatures, and the flow rates of hot and cold fluids. The heat exchanger under analysis uses Freon 404A as a working fluid in an air conditioning system for cooling in the Evaporator and energy recovery in the Condenser. The theoretical model is localized and applied individually to the Evaporator, Condenser, and heat exchanger regions. The results obtained through the simulation are compared with experimental results that use a global approach for the heat exchanger. The thermal quantities obtained through the theoretical model in the mentioned regions are air velocity, Nusselt number, thermal effectiveness, heat transfer rate, and outlet temperature. The comparisons made with global experimental results are in excellent agreement, demonstrating that the localized theoretical approach developed is consistent and can be used as a comprehensive analysis tool for heat exchangers using heat pipes.

A Numerical Study on Fully Developed Fluid Flow and Heat Transfer in a Spiral Finned Tube

In this paper, the standard k-ε two-equation model is adopted to numerically simulate fully developed fluid flow and heat transfer in a spiral finned tube within a cracking furnace for ethylene manufacturing. By variable transformation, the original 3-D problem is converted into a 2-D problem in spiral coordinates. The algorithm of SIMPLEC is used to study the fully developed fluid flow and heat transfer in the spiral finned tube at constant periphery temperature and constant axial heat flux. The computed results agree pretty well with the experimental data obtained from the industry. Further studies on the fluid flows and temperature profiles at different Reynolds numbers within straight and spiral finned tubes are conducted and the mechanisms involved are explored. It is found that with the spiral finned tube, pressure drop increases to a great extent whereas heat transfer tends to be decreased.

Parametric study of natural convection over horizontal annular finned tube

Natural convection heat transfer from annular finned tubes was studied numerically. Effects of fin spacing, temperature difference and tube diameter on flow pathlines and local heat transfer were also studied. It was shown that pathlines remain mostly circular for different geometries. Moreover, the contributions of fin periphery, fin side and bare tube to heat transfer were specified. It was shown that the heat transfer per unit area of fin periphery can be several times that of other parts. Moreover, in higher finspacing, the heat transfer from the bare tube can be more important than fin sides.

Numerical Simulation of Double Diffusive Mixed Convection in a Horizontal Annulus with Finned Inner Cylinder

The present work relates to a numerical investigation of double diffusive mixed convection around a horizontal annulus with a finned inner cylinder.The solutal and thermal buoyancy forces are sustained by maintaining the inner and outer cylinders at uniform temperatures and concentrations.Buoyancy effects are also considered,with the Boussinesq approximation.The forced convection effect is induced by the outer cylinder rotating with an angular velocity(ω)in an anti-clockwise direction.The studies are made for various combinations of dimensionless numbers;buoyancy ratio number(N),Lewis number(Le),Richardson number(Ri)and Grashof number(Gr).The isotherms,isoconcentrations and streamlines as well as both average and local Nusselt and Sherwood numbers were studied.A finite volume scheme is adopted to solve the transport equations for continuity,momentum,energy and mass transfer.The results indicate that the use of fins on the inner cylinder with outer cylinder rotation,significantly improves the heat and mass transfer in the annulus.

Modelling of heat transfer for progressive freeze concentration process by spiral finned crystallizer

This study presents a novel design for a spiral finned crystallizer which is the primary element of progressive freeze concentration(PFC) system, which simplifies the setup of the conventional system. After the crystallizer has been designed, the research experiments have been conducted and evaluated through a thorough analysis of its performance by developing a mathematical model that can be used to predict the productivity of ice crystal at a range of coolant temperature. The model is developed based on the basic heat transfer equation, and by considering the solution's and the coolant's convective heat transfer coefficient(h) under the forced flow condition.The model's accuracy is verified by making comparison between the ice crystal mass' experimental value and the values predicted by the model. Consequently, the study found that the model helps in enhancing the PFC system.

Optimum design of cast iron finned radiator

The height, thickness and spacing of fins have an impact on the thermal characteristics of a radiator. The calculation of heat output and metal thermal intensity for cast iron finned radiator are given by using heat transfer formula of vertical plate and parallel fins. Each factor having effect on the metal thermal intensity of a radiator is analyzed and the optimum structure parameters of a radiator are given in order to maximize metal thermal intensity.

Thermal Analysis of Melting Occurring Inside a Finned Rectangular Enclosure Equipped with Discrete Pulsed Protruding Heat Sources

This paper numerically investigates the effect of the location of a horizontal fin on the melting of a phase change material(PCM)inside a rectangular enclosure heated by multiple discrete pulsed protruding heat sources.The fin and the phase change material filling the enclosure store the thermal energy extracted from the heat sources,in sensible and latent forms.The heat sources are assumed to simulate electronic components undergoing a superheating technical issue.By extracting heat from the electronics,the PCM plays the role of a heat sink.To analyze the thermal behavior and predict the cooling performance of the proposed cooling system,we derive a nonlinear mathematical model based on mass,momentum and energy conservation laws.Several numerical investigations are conducted to quantify the influence of the fin position on the thermal behavior and the cooling performance of the heat sink.Predictions include the transient maximum temperature occurring inside the heat sources and the liquid volume.A comparison between our numerical results and experimental data selected from the literature shows a good agreement.The main conclusion is that the presence of the fin leads to a slight increase in the melting time.

Application of Response Surface Methodology for Analysing and Optimizing the Finned Solar Air Heater

In this research paper,a solar air heater with triangular fins has been experimentally analysed and optimized.Initially,an experimental set-up of a solar air heater having triangular fins has been developed at the location of 28.10°N,78.23°E.The heat transfer rate through fins and fins efficiency has been determined by the Finite Difference Method model equations.The experimental data and modeled data of response parameters have been optimized in MINITAB-17 software by the Response Surface Methodology tool.For creating the response surface design,three input parameters have been selected namely solar intensity,Reynolds number,and fin base-to-height ratio.The range of solar intensity,Reynolds number,and fin base-to-height ratio is 600 to 1000W/m^(2),4000 to 6000,and 0.4 to 0.8 respectively.The response surface design has been analyzed by calculating the outlet temperature,friction factor,Nusselt number,fin efficiency,thermal performance factor,and exergy efficiency.The optimum settings of input parameters:solar intensity is 1000 W/m^(2);Reynolds number is 4969.7,and the fin base to height ratio is 0.6060,on which these response:namely outlet temperature of 92.531℃,friction factor of 0.2350,Nusselt number of 127.761,thermal efficiency of 50.836%,thermal performance factor of 1.4947,and exergy efficiency of 8.762%.

Heat Storage Performance of PCM in a Novel Vertical Pointer-Shaped Finned Latent Heat Tank

The heat storage performance of latent heat storage systems is not good due to the poor thermal conductivity of phase change materials.In this paper,a new type of pointer-shaped fins combining rectangular and triangular fins has been employed to numerically simulate the melting process in the heat storage tank,and the fin geometry parameter effects on heat storage performance have been studied.The results indicate that compared with the bare tube and the rectangular finned tank,the melting time of the phase change material in the pointer-shaped finned tank is reduced by 64.2%and 15.1%,respectively.The closer the tip of the triangular fin is to the hot wall,the better the heat transfer efficiency.The optimal height of the triangular fin is about 8 mm.Increasing the number of fins from 4 to 6 and from 6 to 8 reduces the melting time by 16.0%and 16.7%respectively.However,increasing the number of fins from 8 to 10 only reduces the melting time by 8.4%.When the fin dimensionless length is increased from 0.3 to 0.5 and from 0.5 to 0.7,the melting time is shortened by 17.5%and 13.0%.But the melting time is only reduced by 2.9%when the dimensionless fin length is increased from 0.7 to 0.9.For optimising the design of the thermal storage system,the results can provide a reference value.

Performance analyses of a novel finned parabolic trough receiver with inner tube for solar cascade heat collection

Designing highly-efficient parabolic trough receiver(PTR)contributes to promoting solar thermal utilization and alleviating energy crisis and environmental problems.A novel finned PTR with inner tube(FPTR-IT),which can provide different grades of thermal energy with two heat transfer fluids(oil and water),is designed to improve thermal efficiency.In this FPTR-IT,an inner tube and straight fins are employed to respectively lessen heat loss at upper and lower parts of the absorber.Based on the design,a numerical model is developed to investigate its performance.Comparisons with other PTRs indicate that the FPTR-IT can combine the advantages of PTR with inner tube and finned PTR and obtain the best performance.Moreover,performance evaluation under broad ranges of direct normal irradiances(300–1000 W/m^(2)),flow rates(50–250 L/min)and inlet temperatures(400–600 K)of oil as well as flow rates(3.6–10 L/min)and inlet temperatures(298.15–318.15 K)of water is investigated.Compared with conventional PTR,heat loss is reduced by 20.7%–63.2%and total efficiency is improved by 0.03%–4.27%.Furthermore,the proportions of heat gains for water and oil are located in 8.3%–73.9%and-12.0%–64.3%,while their temperature gains are located in 11.6–37.9 K and-1.2–19.6 K,respectively.Thus,the proposed FPTR-IT may have a promising application prospect in remote arid areas or islands to provide different grades of heat for electricity and freshwater production.

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTM) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

Theoretical Analysis of Annular Elliptic Finned Tube Evaporative Condenser Based on Field Measurement

In this article,a new evaporative condenser with an annular elliptic firmed tube heat exchanger that includes a round inner tube and elliptic outer finned tube was designed and analyzed.The refrigerant flows between the round inner tube and the elliptic outer tube,and it simultaneously exchanges heat with the cooling water in the inner tube,the spray water,and the cooling air flowing past the outer tube.Using field measurement for the traditional round finned tube evaporative condenser in the Futong Metro Station of Line 14 in Beijing,China,the theoretical heat transfer performance of the annular elliptic finned tube evaporative condenser was analyzed and simulated.Compared with a round finned tube heat exchanger,the heat exchange capacity of the annular elliptic finned tube increased by 2.34%to 9.28%;the total heat transfer coefficient increased by 47.42%,and the power consumption of the fan in the air-conditioning system with an annular elliptic finned tube heat exchanger decreased by 11.18%to 14.65%.Therefore,the energy-saving performance and the heat transfer performance of the new annular elliptic finned tube heat exchanger were enhanced compared to the round finned tube heat exchanger.

Tbx 4 and Tbx 5 gene expression associated with appendage development and its relationship with the absence of the pelvic fin in Pampus argenteus

The Tbx family is first known through the study of their functions in the body and limbs,and its members Tbx4 and Tbx5 genes are important factors in determining the characteristics of the appendages.Pampus argenteus is one of the important economical marine fishes widely distributed in offshore areas.Therefore,it is necessary to study the role of Tbx family genes in the deletion of pelvic fin in P.argenteus.In this study,we cloned Tbx4 and Tbx5 cDNA sequence of P.argenteus(GenBank:MH709128 and MH712458).The Western blot and real time PCR were used to detect the expressions of Tbx4 and Tbx5 in different developmental stages and tissues of P.argenteus.In addition,whole-mount in-situ hybridization was used to study the localization of Tbx4 and Tbx5 genes in different developmental stages of P.argenteus.Results show that the translation of Tbx4 mRNA was inhibited during the critical period of pelvic fin development.Among different tissues,Tbx4 protein levels were the lowest in the abdominal epithelium,and even lower than that in the pectoral fin,suggesting that the protein expression was also inhibited in the abdominal epithelium of adult P.argenteus.Therefore,the results indicated that upstream genes regulation led to the key stage-specific and low expression of Tbx4 during pelvic fin development and in the abdominal epithelium.

Radiative heat transfer analysis of a concave porous fin under the local thermal non-equilibrium condition:application of the clique polynomial method and physics-informed neural networks

The heat transfer through a concave permeable fin is analyzed by the local thermal non-equilibrium(LTNE)model.The governing dimensional temperature equations for the solid and fluid phases of the porous extended surface are modeled,and then are nondimensionalized by suitable dimensionless terms.Further,the obtained nondimensional equations are solved by the clique polynomial method(CPM).The effects of several dimensionless parameters on the fin's thermal profiles are shown by graphical illustrations.Additionally,the current study implements deep neural structures to solve physics-governed coupled equations,and the best-suited hyperparameters are attained by comparison with various network combinations.The results of the CPM and physicsinformed neural network(PINN)exhibit good agreement,signifying that both methods effectively solve the thermal modeling problem.

Seismicity patterns before the 2021 Fin (Iran) doublet earthquakes using the region-time-length and time-to-failure methods

Knowledge regarding earthquake hazards and seismicity is crucial for crisis management, and the occurrence of foreshocks, seismic activity patterns, and spatiotemporal variations in seismic activity have been studied. Furthermore, the estimation of the region-time-length (RTL) parameter has been proposed to detect seismic quiescence before the occurrence of a large earthquake. In addition, the time-to-failure method has been used to estimate the time occurrence of large earthquakes. Hence, in this study, to gain deeper insight into seismic activity in the southern Zagros region, we utilized the RTL algorithm to identify the quiescence and activation phases leading to the Fin doublet earthquakes. Temporal variations in the RTL parameter showed two significant anomalies. One corresponded to the occurrence time of the first earthquake (2017-12-12);the other anomaly was associated with the occurrence time of the second event (2021-11-14). Based on a negative value of the RTL parameter observed in the vicinity of the Fin epicenters (2021), seismic quiescence (a decrease in seismicity compared to the preceding background rate) was identified. The spatial distribution of the RTL prognostic parameters confirms the appearance of seismic quiescence surrounding the epicenter of the Fin doublet earthquakes (2021). The time-to-failure method was designed using precursory events that describe the acceleration of the seismic energy release before the mainshock. Using the time-to-failure method for the earthquake catalog, it was possible to estimate both the magnitude and time of failure of the Fin doublet. Hence, the time-tofailure technique can be a useful supplementary method to the RTL algorithm for determining the characteristics of impending earthquakes.

基于Fins/UDP通信协议的采煤机远程监控系统研究

为推进采煤机自动化水平的提升,研究了基于Fins/UDP通信协议的采煤机远程监控系统。详细阐述了Fins/UDP通信协议的报文构成,并构建了适用于煤矿井下采煤机的远程监控系统架构。借助开源的VUE和Flask框架,展开了系统软件的开发。最后,通过一系列实验,对系统的数据采集和指令下发等关键功能进行了验证。实验结果表明,所设计的系统可以实现对采煤机的有效远程监控。

Study on Thermo-Conductive Plastic Finned TubeRadiators

This paper discusses thermo-conductive plastic finned tube radiators used in water saving type powerstations. First, the development of thermo-conductive plastics is introduced. Second, in order todetermine the rational geometric dimensions of thermo-conductive plastic finned tubes, an objectivefunction which takes the minimum volume of the consumed material for making finned tubes as an ob-ject is introduced. On the basis of the function, the economy comparison between thermaxonductiveplastic finned tubes and metal finned tubes is conducted.