Early-age Electrical Resistivity and Reactive Capacity of Mineral Admixtures in Mortars

A non-contacting electrical resistivity measurement device was used to investigate the effect of different types and contents of mineral admixtures on the hydration perfrormanee of mortars during early age. The experimental results show that the changes of measured resistivity with time of hydration can be used to describe the hydration characteristics of cement-based materials, as well as the physical and chemical behavior of fly ash; blast furnace slag and silica fume at the very early ages. With an increasing replacement ratio of mineral admixtures, for the specimens blended with fly ash or slag, the resistivity increases firstly, then the following flatting period extends and after setting the resistivity increasing becomes slow and consequently a lower resistivity value at 24 hours occurs. This is due to the dilution effect and lower pozzolanicl hydraulic activity of fly ash and slag. However, for the samples incorporated with silica fume, the resistivity value through 24 hours is lower with shorter flatting period and larger slope in the resistivity curves, which is because of its particle size effect and higher pozzolanic activity of silica fume. Moreover, non-contacting resistivity measurement might provide a helpful information to predict the long term performanee including the durability of cement-based materials at early ages.

Effect of LaCl_3 on Resistance and Absorptive Capacity to Formaldehyde of Indoor Ornamental Plants under Formaldehyde Stress

[Objective] This study aimed to determine the effect of rare earth biological regulator LaCl3 on the absorptive capacity to formaldehyde of four indoor ornamental plants, and to screen out the plant whose absorptive capacity to formaldehyde can be increased most greatly by LaCl3. [Method] Effect of LaCl3 on absorptive capacity to formaldehyde of four indoor ornamental plants was studied through fumigating in laboratory. Simultaneously, the indoor ornamental plant, which could significantly en- hance the degradation capacity of formaldehyde, was screened out to study the physiological and biochemical mechanisms of formaldehyde resistance. [Result] The ability to absorb formaldehyde of four indoor ornamental plants was enhanced by dif- ferent ranges after spraying with LaCl3 at suitable concentrations. The ability to ab- sorb formaldehyde of Hedera nepalensis var. sinensis, Chlorophytum comosum, Scindapsus aureun and Sansevieria trifasciata increased by 15.16%, 4.72%, 19.75% and 7.68%, respectively. In the four indoor ornamental plants, the capacity of S. au- reun to absorb formaldehyde was greatly improved by spraying LaCl3. When S. au- reun was stressed by formaldehyde, its chlorophyll content decreased by 39.87%, membrane permeability, MDA accumulation and POD activity increased by 8.17%, 56.92%, and 11.32%, respectively. However, compared the pre-spraying group with the no-spraying group under formaldehyde stress, chlorophyll content of S. aureun reduced less, membrane permeability and MDA cumulative both increased less, but POD activity increased more. [Conclusion] The formaldehyde absorption capacity of S. aureun was mostly improved after LaCl3 was sprayed.

Snow resisting capacity of Caragana microphylla and Achnatherum splendens in a typical steppe region of Inner Mongolia,China

Snow resisting capacity of vegetation is important for secondary distribution of water resources in seasonal snow areas of grassland because it affects the regeneration,growth and nutrient circulation of vegetation in grassland.This study investigated vegetation characteristics(canopy height,canopy length and crown width)of Caragana microphylla Lam.(shrub)and Achnatherum splendens(Trin.)Nevski.(herb),and snow morphologies(snow depth,snow width and snow braid length)in a typical steppe region of Inner Mongolia,China in 2017.And the influence of vegetation characteristic on snow resisting capacity(the indices of bottom area of snow and snow volume reflect snow resisting capacity)was analyzed.The results showed that snow morphology depends on vegetation characteristics of shrub and herb.The canopy height was found to have the greatest influence on snow depth and the crown width had the greatest influence on snow width.The canopy length was found to have little influence on morphological parameters of snow.When the windward areas of C.microphylla and A.splendens were within the ranges of 0.0-0.5 m2 and 0.0-8.0 m2,respectively,the variation of snow cover was large;however,beyond these areas,the variation of snow cover became gradually stable.The potential area of snow retardation for a single plant was 1.5-2.5 m2 and the amount of snow resistance was 0.15-0.20 m3.The bottom area of snow and snow volume(i.e.,snow resisting capacity)of clumped C.microphylla and A.splendens was found to be 4 and 25 times that of individual plant,respectively.The results could provide a theoretical basis both for the estimation of snow cover and the establishment of a plant-based technical system for the control of windblown snow in the typical steppe region of Inner Mongolia.

Study of the Bearing Capacity at the Variable Cross-Section of A Riser- Surface Casing Composite Pile

Reducing the cost of offshore platform construction is an urgent issue for marginal oilfield development.The offshore oil well structure includes a riser and a surface casing.The riser,surface casing and oil well cement can be considered special variable cross-section piles.Replacing or partially replacing the steel pipe pile foundation with a variable cross-section pile to provide the required bearing capacity for an offshore oil platform can reduce the cost of foundation construction and improve the economic efficiency of production.In this paper,the finite element analysis method is used to investigate the variable cross-section bearing mode of composite piles composed of a riser and a surface casing in saturated clay under a vertical load.The calculation formula of the bearing capacity at the variable section is derived based on the theory of spherical cavity expansion,the influencing factors of the bearing capacity coefficient N_(c) are revealed,and the calculation method of N_(c) is proposed.By comparing the calculation results with the results of the centrifuge test,the accuracy and applicability of the calculation method are verified.The results show that the riser composite pile has a rigid core in the soil under the variable cross-section,which increases the bearing capacity at the variable cross-section.

Upper Bound Solution of the Resisting Moment Bearing Capacity of A Composite Bucket Shallow Foundation of An Offshore Wind Turbine in Sand

Bearing the large moment that is generated by the wind load that acts on the upper structure of offshore wind turbines is an important feature of their foundations that is different from other offshore structures.A composite bucket shallow foundation(CBSF)has been proposed by Tianjin University to address the soft geological conditions in the offshore regions of China for wind turbines.The CBSF is a new type of foundation and is effective against large moments.The soil deformation test of a CBSF and the numerical simulation study under the same working conditions are carried out to determine the failure mechanism of a CBSF under moment loading.The resisting soil compression rateηm is defined as a new empirical parameter that indicates the ability of the soil inside the bucket to resist moment loading.The upper limit of the resisting moment bearing capacity of the bucket foundation is derived through the upper bound theorem of classical plasticity theory based on the failure mechanism.The calculation method is validated by tests of bucket models with different height-diameter ratios in sand under moment loading.

Muscle capacity and physical function in older women:What are the impacts of resistance training?

The number of older adults （individuals ≥65 years）, particularly women, in our society is increasing and understanding the impact of exercise on muscle capacity （e.g., strength and power） and subsequently physical function is of utmost importance to prevent disability and maintain independence. Muscle capacity declines with age and this change negatively impacts physical function in older women. Exercise, specifically resistance training, is recommended to counteract these declines; however, the synergistic relationships between exercise, muscle capacity, and physical function are poorly understood. This review will summarize the literature regarding age-related changes in the aforementioned variables and review the research on the impact of resistance training interventions on muscle capacity and physical function in older women. Recommendations for future research in this area will be discussed.

Effect of Nano - Titanium Dioxide with Different Antibiotics against Methicillin-Resistant Staphylococcus Aureus

The different investigation has been carried out on the biological activities of titanium dioxide nanoparticle but the effect of this nano product on the antibacterial activity of different antibiotics has not been yet demonstrated. In this study the nano size TiO2 is synthesized using citric acid and alpha dextrose and the enhancement effect of TiO2 nanoparticle on the antibacterial activity of different antibiotics was evaluated against Methicillin-resistant Staphylococcus aureus (MRSA). During the present study, different concentrations of nano-scale TiO2 were tested to find out the best concentration that can have the most effective antibacterial property against the MRSA culture. Disk diffusion method was used to determine the antibacterial activity of these antibiotics in the absence and presence of sub inhibitory concentration of TiO2 nano particle. A clinical isolate of MRSA, isolated from Intensive Care Unit (ICU) was used as test strain. In the presence of sub-inhibitory concentration of TiO2 nanoparticle (20 μg/disc) the antibacterial activities of all antibiotics have been increased against test strain with minimum 2 mm to maximum 10mm. The highest increase in inhibitory zone for MRSA was observed against pencillin G and amikacin (each 10 mm). Conversely, in case of nalidixic acid, TiO2 nanoparticle showed a Synergic effect on the antibacterial activity of this antibiotic against test strain. These results signify that the TiO2 nanoparticle potentate the antimicrobial action of beta lactums, cephalosporins, aminoglycosides, glycopeptides, macrolids and lincosamides, tetracycline a possible utilization of nano compound in combination effect against MRSA.

Ghrelin regulates insulin resistance by targeting insulin-like growth factor-1 receptor via miR-455-5p in hepatic cells

Objective: To explore the mechanism by which ghrelin regulates insulin sensitivity through modulation of miR-455-5p in hepatic cells. Methods: HepG2 cells were treated with or without DAG (1 μM). Glucose consumption, intracellular glycogen content, phosphorylation of PI3K and Akt stimulated by insulin, expression of miR-455-5p, as well as IGF-1R protein level were analyzed. In addition, bioinformatic analysis, dual luciferase reporter assay, miR- 455-5p mimic or inhibitor treatment was conducted to investigate the molecular mechanisms. Results: High glucose treatment upregulated miR-455-5p expression but reduced glucose consumption and glycogen content. DAG reversed the effect of high glucose on glucose metabolism, increased protein level of IGF-1R and phosphorylation of PI3K/Akt stimulated by insulin, as well as downregulated miR-455-5p expression. Bioinformatic analysis indicated IGF-1R was the target of miR-455-5p. Dual luciferase reporter assay, as well as transfection with miR-455-5p mimic/inhibitor confirmed that DAG activated IGF-1R/PI3K/Akt signaling via inhibiting miR-455-5p. Conclusion: DAG improves insulin resistance via miR-455-5p- mediated activation of IGF-1R/PI3K/Akt system, suggesting that suppression of miR-455-5p or activation of DAG may be potential targets for T2DM therapy.

Coating Resistant Refractory Castables YB/T 4193-20091

1 Scope This standard specifies the term, definition, classification, technical requirements, test methods, quality appraisal procedures, packing, marking, transportation, storage, and quality certificate of coating resistant refractory eastables.

Genetic Study on JS399-19 Resistance in Hyphal Fusion of Fusarium graminearum by Using Nitrate Nonutilizing Mutants as Genetic Markers

Twenty-two nitrate nonutilizing （nit） mutants were recovered from five wild-type isolates of Fusarium graminearum and fifty nit mutants were recovered from three JS399-19-resistant mutants of F. graminearum cultured on MMC medium. Some biological properties were compared between nit mutants and their parental isolates. The results showed that there were no significant differences in growth rate, cultural characters or pathogenicity between JS399-19-resistant nit mutants and their parental isolates. But the conidial production and the sexual reproduction ability changed to some extent. There was no cross resistance toward chlorate and JS399-19 in F. graminearum and the resistance could be stable through 20-time subcultures. Therefore, the nit could be used as a genetic marker for studying the genetics of JS399-19 resistance in E graminearum, which was used to study JS399-19 resistance transferability in hyphal fusion. Resistance in JS399-19 could not be transferred by hyphal fusion or could be transferred with low chance between two compatible isolates, which would delay the development of JS399-19 resistance in the field.

Piezoresistive Response Extraction for Smart Cement-based Composites/Sensors

A kind of piezoresistive response extraction method for smart cement-based composites/sensors was proposed.Two kinds of typical piezoresistive cement-based composites/sensors were fabricated by respectively adding carbon nanotubes and nickel powders as conductive fillers into cement paste or cement mortar.The variation in measured electrical resistance of such cement-based composites/sensors was explored without loading and under repeated compressive loading and impulsive loading.The experimental results indicate that the measured electrical resistance of piezoresistive cement-based composites/sensors exhibits a two-stage variation trend of fast increase and steady increase with measurement time without loading,and an irreversible increase after loading.This results from polarization caused by ionic conduction in these composites/sensors.After reaching a plateau,the measured electrical resistance can be divided into an electrical resistance part and an electrical capacity part.The piezoresistive responses of electrical resistance part in measured electrical resistance to loading can be extracted by eliminating the linear electrical capacity part in measured electrical resistance.

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent, it is very popular to estimate pile bearing capacity by use of empirical formula and physical indexes of soil provided in the design codes for civil construction in China. This paper attempts to apply mechanical indexes of soil and semi-empirical formulas, which are based on soil mechanical theories and were summarized and presented by Meyerhof in 1976, to calculate the axial pile bearing capacity. Loading test results of 24 single piles in Tianjin area have been collected and compared with the proposed calulation approach.

Activity of the Fungicide JS399-19 Against Fusarium Head Blight of Wheat and the Risk of Resistance

This report reviews the characteristics of JS399-19, a novel cyanoacrylate fungicide. JS399-19 strongly inhibits the mycelial growth of the fungal plant pathogens of the genus Fusarium and exhibits great potential in controlling Fusarium head blight （FHB） on wheat and other cereals. The mode of action of JS399-19 is evidently different from that of benzimidazole （for example, carbendazim） and other sort of fungicides, making it a possible replacement for carbendazim in China to manage carbendazim-resistant subpopulations of Fusarium graminearum and F. asiaticum. JS399-t9 has excellent protective and curative activity against these pathogens. Incorrect use of this fungicide, however, is likely to select for resistance. Among JS399-19-resistant mutants of F. asiaticum induced in the laboratory, the resistant level of mutants was high and the phenotype of resistance against JS399-19 was conferred by a major gene by genetic analysis. The fitness of laboratory-induced JS399-19-resistant mutants of F. asiaticum was nearly equal to that of their parents. JS399-19 lacks cross resistance with other sort fungicides. To control FHB with JS399-19 and to delay the development of the fungicide-resistance, farmers should use tank mixtures containing JS399-19 and carbendazim, metconazole, tebuconazole, or prothioconazole.

钢筋混凝土结构整体承载能力、可靠度和整体抗力系数校准--以简支梁为例

目前,基于构件承载能力极限状态的荷载抗力系数设计法或分项系数法是世界各国土木工程结构设计规范所主要采用的概率极限状态设计方法,目前这两种方法存在两个基本矛盾,需要发展基于结构整体可靠度的整体安全系数设计方法。总结钢筋混凝土结构整体承载力设计值和整体抗力系数的确定方法,将FIB混凝土结构整体抗力系数设计法与结构整体可靠度理论相结合,提出钢筋混凝土结构整体承载能力可靠度和整体抗力系数的校准原理。以双面配筋钢筋混凝土结构简支梁为例,通过非线性有限元分析和蒙特卡洛模拟,校准得到钢筋混凝土简支梁的整体承载能力可靠度和整体抗力系数,研究发现钢筋混凝土简支梁的整体承载力可靠指标总体大于构件承载力可靠指标,且整体可靠度指标和构件可靠度指标均远大于目标可靠度指标,表明《建筑结构可靠性设计统一标准》(GB 50058—2018)的目标可靠度指标有较大提升空间。

Bending Resistance of Steel Plate-Reinforced Concrete Beam

The formulas for calculating bending-resistant capacity of a steel plate-reinforced concrete composite beam are derived. To validate the formulas, experiments of the composite beam under three-point bending are carried out. Calculated results based on the formulas are in good agreement with experimental results.

Structure of Micro-nano WC-10Co4Cr Coating and Cavitation Erosion Resistance in NaCl Solution

Cavitation erosion （CE） is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid development of surface engineering techniques. However, the influence of coating structures on CE resistance has not been sys- tematically studied. To better understand their relationship, micro-nano and conventional WC-10Co4Cr cermet coat- ings are deposited by high velocity oxygen fuel spray- ing（HVOF）, and their microstructures are analyzed by OM, SEM and XRD. Meanwhile, characterizations of mechan- ical and electrochemical properties of the coatings are carried out, as well as the coatings＇ resistance to CE in 3.5 wt % NaC1 solution, and the cavitation mechanisms are explored. Results show that micro-nano WC-10Co4Cr coating possesses dense microstructure, excellent mechanical and electrochemical properties, with very low porosity of 0.26 4-0.07% and extraordinary fracture toughness of 5.58 4-0.51 MPa.m1/2. Moreover, the CE resistance of micro-nano coating is enhanced above 50% than conventional coating at the steady CE period in 3.5 wt % NaC1 solution. The superior CE resistance of micro- nano WC-10Co4Cr coating may originate from the unique micro-nano structure and properties, which can effectively obstruct the formation and propagation of CE crack. Thus,a new method is proposed to enhance the CE resistance of WC-10Co4Cr coating by manipulating the microstructure.

Influence of rare earth elements on corrosion resistance of BFe10-1-1 alloys in flowing marine water

The corrosion behavior of BFe10-1-1 alloy with different rare earth （RE） contents in simulated flowing marine water was investigated by X-ray diffractometer and scanning electron microscope （SEM）. It was demonstrated that the corrosion rate of BFel0-1-1 alloy with the same chemical compositions in faster flow velocity of marine water was higher than that in a lower flow velocity of marine water. Fixing the flow velocity, BFe 10-1-1 alloy had the best flushing corrosion resistance when the RE content was 0.04wt.%. The consequence of such good corrosion resistance was attributed to the formation of compact protective film on alloy surface containing RE phase such as CeNis. The RE-contained film combines with other corrosion products firmly, which was difficult to fall off from the alloy surface in the flowing marine water. Additionally, SEM analysis confirmed that pitting mechanism, which would be transformed to spalling mechanism gradually with further increasing RE content, was the prevalent mechanism when the alloy contained 0.04wt.%RE.

Characterization and functional analysis of β-1,3-galactosyltransferase involved in Cry1Ac resistance from Helicoverpa armigera(Hübner)

Carbohydrate chains are the principal antigens by which Bacillus thuringiensis（Bt） identify receptor proteins. The interaction between the antigen and Bt causes a pore in the membrane of midgut epithelial cells of insects. Receptor proteins, such as aminopeptidase N and alkaline phosphatase, are glycoproteins. Cadherin is another cell surface receptor protein which has potential glycosylation sites. Glycosyltransferase is very important for the synthesis and modification of receptor proteins. It can indirectly influence the function of Bt. The 1 950 bp full-length c DNA encoding β-1,3-galactosyltransferase was cloned from the the midgut of Helicoverpa armigera by degenerative PCR combined with RACE techniques（GAL-Harm, Gen Bank accession no.： GQ904195.1） with two potential N-glycosylation sites（^157NNTI^160 and ^272NKTL^275）. Protein sequence alignments revealed that H. armigera β-1,3-galactosyltransferase shared high identity with β-1,3-galactosyltransferase in other insect species. The expression level of the β-1,3-galactosyltransferase gene in Cry1Ac-resistant H. armigera larvae was 9.2-fold higher than that in susceptible strain. The function of β-1,3-galactosyltransferase was investigated using RNAi technique. The result showed Cry1 Ac enhanced the toxicity against the si RNA-treated larvae compared with non-si RNA-treated ones, which indicated β-1,3-galactosyltransferase played an important role for the insecticidal toxicity of Cry1 Ac in H. armigera.

Effect of Fused MgO-ZrO_2 Clinker Addition on Thermal Shock Resistance of MgO-ZrO_2 Unfired Bricks

MgO -ZrO2 unfired bricks with ZrO2 content up to 8% at the interval of 2% were prepared, using fused magnesia （ MgO ： 97% ） and fused MgO - ZrO2 clinker （ ZrO2 ： 14. 33% ） as starting materials and phenolic resin as binder. The effects of ZrO2 content on thermal shock resistance （TSR） and other properties such as cold and hot modulus of rupture have been investigated. Re- sidual cold modulus of rupture ratio after heating at 1 000 ℃ and quenching by air blowing was adopted to characterize TSR. Addition of the MgO -ZrO2 clinker improves TSR, attributing to the microcrack toughening effect by thermal expansion mismatch between different phases. When ZrO2 content goes above 4%. the impro- ving effect tends to be moderate. The introduction of MgO- ZrO2 clinker can also improve the HMOR at 1 500 ℃, while the increased ZrO2 content reduces CMOR of the bricks prefired at 1 600 ℃, due to the thermal expansion mismatch effect. Compromising the overall properties, the optimal ZrO2 content for such magnesia based unfired brick is suggested to be 4%.

Antimicrobial Resistance,Virulence Profile,and Molecular Characterization of Listeria monocytogenes Isolated from Ready-to-eat Food in China,2013-2014

We aimed to investigate the potential pathogenic profile and antibiotic resistance of Listeria monocytogenes isolated from ready-to-eat food in China.Antimicrobial resistance was determined by broth microdilution following the Clinical and Laboratory Standards Institute protocol Molecular serotyping,virulence,and resistance genes were identified using PCR.Multi-locus