期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
Selection of Fire-resistant Tree Species for Southwestern China 被引量:8
1
作者 田晓瑞 舒立福 贺庆棠 《Forestry Studies in China》 CAS 2001年第2期32-38,共7页
Selection of fire resistant tree species for the southwestern China and the planting of those species can effectively prevent large area's fire damage. In this paper the components and flammability of leaves, twi... Selection of fire resistant tree species for the southwestern China and the planting of those species can effectively prevent large area's fire damage. In this paper the components and flammability of leaves, twigs and barks of 12 tree species in the mountain area of southwestern China have been tested and analyzed in the laboratory. The test and analysis indicate the results as follows:(1) for all the tree species, the fire resistance of leaves is much weaker than that of twigs and barks, and the broad leaves are stronger than those of conifers in fire resistance. (2) Heat value, moisture, ignition point and ash content are main indexes to affect fire resistance. Heat value relates to lignose content and benzene ethanol extractive content linearly.(3) Of all the 12 tree species, Schima superba,Castanopsis hystrix, Myrica rubra have the strongest resistance to fire; Machilus pauhoi, Michelia macclurei, Mytilaria laosensis, Camellia olifera and Manglietia tenuipes are relatively strong in fire resistance, and Lithocapus thalassica, Tsoongiodendron odorum, Cunninghamia lanceolata and Pinus massoniana are weak in fire resistance. 展开更多
关键词 biological fire resistance fire resistant tree species shaded fuelbreak
下载PDF
Microstructure and Mechanical Properties of Precipitation Strengthened Fire Resistant Steel Containing High Nb and Low Mo 被引量:4
2
作者 Zheng-yan ZHANG Qi-long YONG +3 位作者 Xin-jun SUN Zhao-dong LI Jun-yu KANG Guo-dong WANG 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2015年第4期337-343,共7页
Through the thermo-mechanical control process (TMCP), a high Nb low Mo fire resistant steel with the yield strength (YS) of 521 MPa at room temperature (RT) and 360 MPa at elevated temperature (ET) of 600 ℃ w... Through the thermo-mechanical control process (TMCP), a high Nb low Mo fire resistant steel with the yield strength (YS) of 521 MPa at room temperature (RT) and 360 MPa at elevated temperature (ET) of 600 ℃ was developed based on MX (M=Nb, V, Mo; X=C,N) precipitation strengthening. A series of tensile and con- stant load tests were conducted to study the mechanical properties at ET. The dynamic continuous cooling transfor- mation (CCT) as well as precipitation behavior of microalloy carbonitride was investigated by means of thermal sim- ulator and electron microscopy approaches. Results showed that the failure temperature of tested steel was deter- mined as 653 ℃, and the granular bainite was obtained when the cooling rate was higher than 10 ℃/s. In the rolled state, a certain amount of M/A islands was observed. During heating from RT to ET, M/A islands disappeared, and cementites and high dense compound precipitates (Nb, Mo, V)C with size of less than 10 nm precipitated in ferrite at ET (600 ℃), which resulted in precipitation strengthening at ET. 展开更多
关键词 fire resistant steel elevated temperature property MICROALLOYING granular bainite precipitation strengthening
原文传递
Studies on Selection of Fire Resistant Tree Species for Subtropical Area of China
3
作者 SHU Lifu TIAN Xiaorui YAO Shuren1.Research Institute of Ecology. Environment & Protection. CAF. Beijing. 100091 2. Nanjing Forest Police School, Nanjing. 210042 《Chinese Forestry Science and Technology》 2002年第2期38-46,共9页
Fire disaster is the primary one of the facts of deforestation. Although in recent years the level of forest management and technique for fire suppression have been improving and fire fighting force has been strengthe... Fire disaster is the primary one of the facts of deforestation. Although in recent years the level of forest management and technique for fire suppression have been improving and fire fighting force has been strengthened, the area of fire has not been decreased obviously. Using biological fire resistant technique can effectively prevent the campaign fire. In this paper, fire resistant ability and component about 12 tree species, in mountain area of Daguishan, Guangxi Zhuang Autonomous Region, have been ... 展开更多
关键词 biological fire resistance fire resistant tree species fire-resistant forest belts
原文传递
氯乙烯-丙烯腈共聚物乳液合成技术及其表征 被引量:1
4
作者 余天石 董玲玲 +3 位作者 姚锦余 朱云新 瞿峰 张福美 《聚氯乙烯》 CAS 2007年第7期5-7,共3页
介绍了氯乙烯-丙烯腈共聚物的乳液聚合方法,研究了合成过程中乳化剂、引发剂的加入方式及工艺条件对共聚物性能的影响,并对共聚物进行了表征。结果表明:乳化剂的最佳投加方式为(以乳化剂/VCM表示):先投加0.02,反应开始后流加0.02;引发... 介绍了氯乙烯-丙烯腈共聚物的乳液聚合方法,研究了合成过程中乳化剂、引发剂的加入方式及工艺条件对共聚物性能的影响,并对共聚物进行了表征。结果表明:乳化剂的最佳投加方式为(以乳化剂/VCM表示):先投加0.02,反应开始后流加0.02;引发剂的最佳投加方式为(以引发剂/VCM表示):先投加0.012,反应开始后流加0.012。该共聚物具有优良的阻燃性能。 展开更多
关键词 氯乙烯-丙烯腈共聚物 乳液聚合 阻燃
下载PDF
阻燃填料对陶瓷化耐火硅橡胶性能的影响 被引量:1
5
作者 普庆 《中国材料进展》 CAS CSCD 北大核心 2022年第10期864-868,共5页
为探究阻燃填料对陶瓷化耐火硅橡胶性能的影响,以硅橡胶为基材,硼酸锌和玻璃粉为成瓷填料,不同比例的氢氧化铝和氢氧化镁为阻燃填料,制备了陶瓷化耐火硅橡胶。并对陶瓷化硅橡胶的硬度、拉伸性能、撕破性能、电气绝缘性能及耐火性能进行... 为探究阻燃填料对陶瓷化耐火硅橡胶性能的影响,以硅橡胶为基材,硼酸锌和玻璃粉为成瓷填料,不同比例的氢氧化铝和氢氧化镁为阻燃填料,制备了陶瓷化耐火硅橡胶。并对陶瓷化硅橡胶的硬度、拉伸性能、撕破性能、电气绝缘性能及耐火性能进行了测试分析,结果表明:相较于普通硅橡胶,陶瓷化硅橡胶的邵氏硬度提高了26.3%;拉伸性能有不同程度的降低,但仍可以满足电线电缆产品标准中的拉伸性能要求;撕破性能最大增幅为74%;电气绝缘性能有一定程度的降低;陶瓷化硅橡胶具有良好的耐火性能,且在阻燃填料相同质量份数下,氢氧化镁比氢氧化铝更有利于陶瓷化硅橡胶的阻燃性能的提高,其极限氧指数相较于普通硅橡胶提高了41.1%。 展开更多
关键词 陶瓷化 硅橡胶 阻燃填料 机械性能 耐火性能 电气绝缘性能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部