Review of state-of-the-art decision support systems (DSSs) for prevention and suppression of forest fires

Forest ecosystems are our priceless natural resource and are a key component of the global carbon budget. Forest fires can be a hazard to the viability and sustainable management of forests with consequences for natural and cultural environments, economies, and the life quality of local and regional populations. Thus, the selection of strategies to manage forest fires, while considering both functional and economic efficiency, is of primary importance. The use of decision support systems(DSSs) by managers of forest fires has rapidly increased. This has strengthened capacity to prevent and suppress forest fires while protecting human lives and property. DSSs are a tool that can benefit incident management and decision making and policy, especially for emergencies such as natural disasters. In this study we reviewed state-of-the-art DSSs that use: database management systems and mathematical/economic algorithms for spatial optimization of firefighting forces; forest fire simulators and satellite technology for immediate detection and prediction of evolution of forest fires; GIS platforms that incorporate several tools to manipulate, process and analyze geographic data and develop strategic and operational plans.

Comparisons and Assessment of Forest Fire Danger Systems

The paper gives a brief description about the current main forest fire danger rating systems in the world, which in- clude forest fire danger rating system used in Canada, USA, Australia, and other countries. It shows the composition, structure and development of the main fire danger rating systems. The limitations of those systems are also discussed. Through a comparison of the three main forest fire danger rating systems the paper describes their differences on development, fuel complex descriptions, inputs and outputs, and their applications and finds that the technologies of the Canadian forest fire danger rating system can be adopted for China to develop a national forest fire danger rating system. Two steps are needed to develop our own national forest fire danger rating system. Firstly, we apply the CFFDRS directly. Then some studies should be done to calibrate the FDRS to local weather and fuel characteristics.

An expert system for diagnosing fire-caused damages to reinforced-concrete tunnel lining

During the last four decades, reinforced-concrete structure failures have been happening widely for many reasons, such as increased service loads, war accidents, fire, and durability problems. The economic losses due to those failures are very high. An expert system is an interactive computer-based decision tool that uses both facts and heuristics to solve difficult problems based on knowledge acquired from experts. To realize these requirements, a logic programming visual basic language is used together with visual diagnosis. The expert system, Diagnosis of Fire-Caused Damages to Reinforced-Concrete Tunnel Lining (DFCDRCTL) was developed in this work for diagnosing the annual damages caused by fire. The program is used as an alternative of a human expert to make annual technical decisions in diagnosing fire damages at the second reinforced-concrete tunnel lining segment. It is concluded that the proposed DFCDRCTL expert system is easy to use, and is fast and helpful for engineers.

Intelligent Design and Implementation of Missile Fire Control System

Missile fire control system is the core of ship-based missile weapon system, whose safeguard level has direct relation with the attack ability of naval vessels. After a long period of deep investigation and research, it was found that, in one missile fire control system, there are such problems as single safeguard system, low ratio of cost to efficiency, etc. By adopting intelligent control techniques and many measures to multiple securities, the new type of assistant system is designed, some difficult problems are solved, such as fixed project channel and unitary means of missiles, which can make the equipment carry out combat mission reliably and continuously.

Tank Fire Control Systems Accuracy Assignment Based on Fuzzy Comprehensive Judgment Method

A method of accuracy assignment based on fuzzy comprehensive judgment method (FCJM) in tank fire control system is proposed. From the flowing route of the error sources and their respective correlative signals, the transfer functions of several sources are analysed by means of mathematic simulation, and FCJM is applied to obtain the cost comprehensive factor for each part of system, combining its error sensitivity factor the mathematical model is built to solve the accuracy assignment problem. Simulation result shows the proposed method can help designer of tank fire control system work out an optimal system more efficiently and more economically.

Hazard analysis system of urban post-earthquake fire based on GIS

The authors study the structure, functions and data organization for the hazard analysis system of urban post-earthquake fire on the platform of GIS. A general hazard analysis model of the post-earthquake fire is presented. Taking Shanghai central district as background, a system for hazard analysis of the post-earthquake fire and auxiliary decision-against fire is developed.

Accuracy Assignment Study of Tank Fire Control System Based on Value Analysis Method

A method of accuracy assignment based on value analysis method （VAM） in tank fire control system （TFCS） is proposed. From the analysis of primary error sources and their error transfer relationships, the mathematical model is built on the basis of VAM to solve the accuracy assignment problem. Simulation results show the validation and feasibility of the proposed method. It can help designer of tank fire control system work out an optimal system more efficiently and more economically.

System Performance and Pollution Emission of Biomass Gas Co-Firing in a Coal-Fired Boiler

To reduce greenhouse gases emission and increase the renewable energy utilization portion in the world, the biomass gasification coupled with a coal-fired boiler power generation system is studied. It is a challenge to achieve optimum performance for the coupled system. The models of biomass gasification coupled with co-firing of coal in a boiler have been established. A comparative study of three kinds of biomass (Food Rubbish, Straw and Wood Pellets) has been done. The syngas produced in a 10 t/h gasifier is fed to a 330 MWe coal-fired boiler for co-combustion, and the co-firing performances have been compared with pure coal combustion case under the conditions of constant boiler load. Results show that co-firing decreases the furnace combustion temperature and raises the flue gas temperature for Food Rubbish and Straw, while, flue gases temperature decrease in case of Wood Pellets. At the same time NOx and SOx emissions have reduced. The system efficiencies at constant load for Food Rubbish, Straw and Wood Pellets are 83.25%, 83.88% and 82.56% when the optimum conditions of gasification and co-firing process are guaranteed.

34 GHz Bandpass Filter for Low-temperature Co-fired Ceramic System-in-Package Application

Modern electronic circuit requires compact,multifunctional technology in communication systems.However,it is very difficult due to the limitations in passive component miniaturization and the complication of fabrication process.The bandpass filter is one of the most important passive components in millimeter（mm）-wave communication system,attracting significant interest in three-dimension（3D） miniaturized design,which is few reported.In this paper,a bandpass filter structure using low-temperature co-fired ceramic（LTCC） technology,which is fully integrated in a system-in package（SIP） communication module,is presented for miniaturized and high reliable mm-wave application.The bandpass filter with 3D end-coupled microstrip resonators is implemented in order to achieve a high performance bandwidth characteristic.Specifically,all of the resonators are embedded into different ceramic layers to decrease the insertion loss and enhance the out-of-band rejection performance by optimizing the coupling coefficient and the coupling strength.A fence structure,which is formed by metal-filled via array with the gap less than quarter wavelength,is placed around the embedded bandpass filter to avoid electromagnetic（EM） interference problem in multilayer structure.This structural model is validated through actual LTCC process.The bandpass filter is successfully manufactured by modifying the co-fireablity characteristics,adjusting the sintering profile,releasing the interfacial stress,and reducing the shrinkage mismatch with different materials.Measured results show good performance and agree well with the high frequency EM full wave simulation.The influence of layer thickness and dielectric constant on the frequency response in fabricated process is analyzed,where thicker ceramic sheets let the filter response shift to higher frequency.Moreover,measured S-parameters denote the center frequency is also strongly influenced by the variation of ceramic material＇s dielectric constants.By analyzing the relationship between the characteristics of the ceramic tape and the center frequency of the filter,both theoretical and experimental data are accumulated for broadening application filed.With the coupling resonators embedded into the ceramic layers,the bandpass filter exhibits advantages of small size and high reliability compared to conventional planar filter structure,which makes the bandpass filter suitable for SIP communicational application.

Theoretical analysis and applications of Y-Inversion Ventilation System in a mine fire zone

Based on mine fire fighting practices at the 1110 working face of the Brapukuria Coal Mine,Bangladesh,we introduce and discuss the Y-Inversion Ventilation System,the latest technology used both in mine fire zone management and the unsealing process.This ventilation system can ensure that all miners breathed fresh air,providing protection for them during fire fighting and unsealing the fire zone.On the other hand,adjusting the amount of air at the working face and forming a CO leakage path controlled the state of the fire and as well ensured that the different fire extinguishing measures could be applied successfully.These are all fundamental techniques which ensured successful fire extinguishing and unsealing of the fire zone.We also analyzed the main reasons for the spontaneous coal combustion that occurred at the 1110 working face.Successful application of advanced composite polymer colloidal perfusion techniques,polymer foam MEA perfusion and fire-prevention technology by infusing nitrogen,used in mine fire zone management and unsealing,are presented.We value the experience with these techniques very highly and are of the opinion that these techniques could be widely used in mine fire fighting practices under similar spontaneous coal combustion conditions elsewhere.

A Review on Mine Fire Disasters and Assessment of Fire Detection Using a Dual-Cab Suppression System

The health and productivity of mining operations are negatively impacted by coal mine fires, making them dangerous. It happened everywhere, in both working and abandoned coal mines. This study seeks to review and provide technical analytics of potential mine fires and fire detection in a Dual-Cab suppression system. Analysis was done on potential mine fires like spontaneous combustion, flammable gas explosions, and cab vehicle fires. Additionally, a review of the NIOSH experiment was conducted to assess the performance of smoke and flame detectors in a dual-cab suppression system. This study guides both open-pit and underground mining operations. Additionally, a few ideas and suggestions are presented to assist with on-the-job safety analysis, ensuing creative alterations, and technology advancement for the mining industry’s overall safety.

Application of Composite Materials in the Fire Explosion Suppression System

In order to lighten the weight of the special vehicles and improve their mobility and flexibility, the weight of all subsystems of the whole vehicle must be reduced in the general planning. A fire explosion suppression system is an important subsystem for the self-protection of vehicle, protection of crews and safety of a vehicle. The performances of the special vehicles determine their survival ability and combat capability. The composite bottle is made of aluminum alloy with externally wrapped carbon fiber ; it has been proven by a large number of tests that the new type explosion suppression fire distinguisher made of such composite materials applied in the special vehicle has reliable performance, each of its technical indexes is higher or equal to that of a steel distinguisher, and the composites can also optimize the assembly structure of the bottle, and improve the reliability and corrosion resistance. Most important is that the composite materials can effectively lighten the weight of the fire explosion suppression system to reach the target of weight reduction of the subsystem in general planning.

APPLICATION OF DIRECT BTT GUIDANCE LAW BASED ON NONLINEAR INVERSE SYSTEM THEORY TO INTEGRATED FIRE／FLIGHT SYSTEMS（IFFS）

To counter BTT guidance mode, new relative motion equations of the targetaircraft and the attack aircraft are proposed. The inverse system theory of the nonlinearcontrol is used, and the direct BTT-180 guidance command is solved, which can operatethe attack aircraft to automatically complete the flight mission of the preceding stage ofthe terminal weapon delivery, and thus the automatic attack is extended from the stage ofthe terminal weapon delivery to the preceding stage of the terminal weapon delivery.

A New Fire Detection Method Using a Multi-Expert System Based on Color Dispersion, Similarity and Centroid Motion in Indoor Environment

In this paper, a video fire detection method is proposed, which demonstrated good performance in indoor environment. Three main novel ideas have been introduced. Firstly, a flame color model in RGB and HIS color space is used to extract pre-detected regions instead of traditional motion differential method, as it’s more suitable for fire detection in indoor environment. Secondly, according to the flicker characteristic of the flame, similarity and two main values of centroid motion are proposed. At the same time, a simple but effective method for tracking the same regions in consecutive frames is established. Thirdly,a multi-expert system consisting of color component dispersion,similarity and centroid motion is established to identify flames.The proposed method has been tested on a very large dataset of fire videos acquired both in real indoor environment tests and from the Internet. The experimental results show that the proposed approach achieved a balance between the false positive rate and the false negative rate, and demonstrated a better performance in terms of overall accuracy and F standard with respect to other similar fire detection methods in indoor environment.

基于杯式燃烧器测试系统的灭火性能评价研究进展

杯式燃烧器试验是消防领域用于测定气体灭火剂最小灭火浓度的经典方法。自哈龙灭火剂被淘汰以来,哈龙替代物经历了不同相态的发展,促使杯式燃烧器测试系统进行相应的改进,同时基于杯式燃烧器测试系统的灭火性能评价研究也在不断拓展。综述了国内外杯式燃烧器测试系统的使用和改进研究,重点介绍了适用于气相、液相、固相和复合相灭火剂的杯式燃烧器测试系统和测试方法,分别对气相、液相、含添加剂细水雾、干粉、复合灭火剂的灭火效率进行了总结和分析,综述了各相态灭火剂灭火性能评价研究。未来,杯式燃烧器测试系统仍将不断被改善,在灭火剂筛选和灭火性能评价等方面将发挥更重要的作用。

职业化背景下消防法律问题研究

火灾事故频发既给我国火灾防控带来了巨大挑战,也对我国火灾防控管理法治化提出了更高的要求。针对我国消防部门改革转隶后职业化发展建设仍存在着消防法律体例架构不完备、法律保障机制不健全、法律责任不完善等问题,根据“十四五”消防规划的总体布局要求,通过合理构建消防法律体例布局、健全消防法律内容、完善消防法律责任,推进消防体制职业化改革,构建完善的职业化消防法规体系。

火灾自动报警系统在地铁火灾中的实践探析

地铁火灾作为一种特殊的火灾灾害,给乘客和地铁运营安全带来严峻挑战。火灾自动报警系统在地铁火灾中发挥着重要作用,它通过感知器和探测器等设备,在火灾早期发现火灾迹象并及时发出警报,以促进快速应急响应和灭火处置。文章通过实践探析火灾自动报警系统在地铁火灾中的应用情况,深入探讨其实际效果与问题,期望能够为相关人员提供参考。

Fire Distribution of Integrated Missile-gun Air Defense System Based on Earlier Damage Criterion

The fire distribution can be divided into weapon assignment and firing time scheduling. The criterion of weapon allocation is that a target with greater threat has higher priority. And the criterion of firing time scheduling is that a target can be damaged with the expected probability before a specific time. A fire distribution scheme and a program for the integrated missile-gun air defense system based on a criterion of earlier damage were presented. An example was taken to illustrate its effectiveness.

飞机客舱饰面型防火涂料的防火阻燃性能研究

为研究飞机客舱饰面型无机复合膨胀型阻燃体系,首先提出并制备了三种不同配比的防火涂料,接着对涂料的干燥时间、涂层厚度及涂层黏度进行了测试分析,然后对其进行了模拟大板实验,得出并分析了三种试样的升温速率曲线,分析了燃烧后的炭层,最后通过热重分析(TG)、差热分析(DTA)两种热分析手段对三种试样进行了热特性分析,得出试样2的防火阻燃效果最佳。结果表明:季戊四醇、聚磷酸铵、三聚氰胺三者协同作用,在火场中不仅可产生难燃气体,起到气相阻燃作用,同时可分解产生无机物,从而在可燃物表面形成一层致密的氧化物薄膜,使新型涂料具有良好的防火阻燃效果;当苯丙乳液、硅溶胶、聚磷酸铵、三聚氰胺、季戊四醇、氯化石蜡、二氧化钛的质量配比为380∶95∶336∶183∶56∶46∶69时,涂料的防火阻燃性能最佳。

基于Unity3D的矿井火灾监测与防治虚拟仿真试验系统

为更好地开展矿业安全类专业试验实践教学和培训,培养安全应急一流复合型拔尖人才,设计一种基于Unity3D的矿井火灾监测与防治虚拟仿真试验教学系统。首先,采用3ds Max建立仿真模型,构建矿井火灾监测防治试验系统总体框架;其次,开展外因火灾监测与远程自动控制救灾风门应急处置、内因火灾监测与温控胞衣阻化剂防灭火应急防控等人机交互试验实训;最后,建立综合评测的试验评价体系用于考核评估。结果表明:该试验系统具备虚拟现实沉浸性、交互性、构想性的技术特点,利于打造井下三维虚拟仿真场景,逼真展示矿井火灾演变过程;在试验与实训方面,可以突破传统模式在时间、空间、安全、资源等方面的限制,提供自主学习与多元评价方式。