Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment and its effects on mechanical properties

Based on experiments and first-principles calculations,the microstructures and mechanical properties of as-cast and solution treated Mg-10Gd-4Y-xZn-0.6Zr(x=0,1,2,wt.%)alloys are investigated.The transformation process of long-period stacking ordered(LPSO)structure during solidification and heat treatment and its effect on the mechanical properties of experimental alloys are discussed.Results reveal that the stacking faults and 18R LPSO phases appear in the as-cast Mg-10Gd-4Y-1Zn-0.6Zr and Mg-10Gd-4Y-2Zn-0.6Zr alloys,respectively.After solution treatment,the stacking faults and 18R LPSO phase transform into 14H LPSO phase.The Enthalpies of formation and reaction energy of 14H and 18R LPSO are calculated based on first-principles.Results show that the alloying ability of 18R is stronger than that of 14H.The reaction energies show that the 14H LPSO phase is more stable than the 18R LPSO.The elastic properties of the 14H and 18R LPSO phases are also evaluated by first-principles calculations,and the results are in good agreement with the experimental results.The precipitation of LPSO phase improves the tensile strength,yield strength and elongation of the alloy.After solution treatment,the Mg-10Gd-4Y-2Zn-0.6Zr alloy has the best mechanical properties,and its ultimate tensile strength and yield strength are 278.7 MPa and 196.4 MPa,respectively.The elongation of Mg-10Gd-4Y-2Zn-0.6Zr reaches 15.1,which is higher than that of Mg-10Gd-4Y0.6Zr alloy.The improving mechanism of elastic modulus by the LPSO phases and the influence on the alloy mechanical properties are also analyzed.

Three novel umami peptides derived from the alcohol extract of the Pacific oyster(Crassostrea gigas):identification,characterizations and interactions with T1R1/T1R3 taste receptors

Oyster(Crassostrea gigas),the main ingredient of oyster sauce,has a strong umami taste.In this study,three potential umami peptides,FLNQDEEAR(FR-9),FNKEE(FE-5),and EEFLK(EK-5),were identified and screened from the alcoholic extracts of the oyster using nano-HPLC-MS/MS analysis,i Umami-Scoring Card Method(i Umami-SCM)database and molecular docking(MD).Sensory evaluation and electronic tongue analysis were further used to confirm their tastes.The threshold of the three peptides ranged from 0.38 to 0.55 mg/m L.MD with umami receptors T1R1/T1R3 indicated that the electrostatic interaction and hydrogen bond interaction were the main forces involved.Besides,the Phe592 and Gln853 of T1R3 were the primary docking site for MD and played an important role in umami intensity.Peptides with two Glu residues at the terminus had stronger umami,especially at the C-terminus.These results contribute to the understanding of umami peptides in oysters and the interaction mechanism between umami peptides and umami receptors.

Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review

Laser powder bed fusion(L-PBF) has attracted significant attention in both the industry and academic fields since its inception, providing unprecedented advantages to fabricate complex-shaped metallic components. The printing quality and performance of L-PBF alloys are infuenced by numerous variables consisting of feedstock powders, manufacturing process,and post-treatment. As the starting materials, metallic powders play a critical role in infuencing the fabrication cost, printing consistency, and properties. Given their deterministic roles, the present review aims to retrospect the recent progress on metallic powders for L-PBF including characterization, preparation, and reuse. The powder characterization mainly serves for printing consistency while powder preparation and reuse are introduced to reduce the fabrication costs.Various powder characterization and preparation methods are presented in the beginning by analyzing the measurement principles, advantages, and limitations. Subsequently, the effect of powder reuse on the powder characteristics and mechanical performance of L-PBF parts is analyzed, focusing on steels, nickel-based superalloys, titanium and titanium alloys, and aluminum alloys. The evolution trends of powders and L-PBF parts vary depending on specific alloy systems, which makes the proposal of a unified reuse protocol infeasible. Finally,perspectives are presented to cater to the increased applications of L-PBF technologies for future investigations. The present state-of-the-art work can pave the way for the broad industrial applications of L-PBF by enhancing printing consistency and reducing the total costs from the perspective of powders.

Genome-wide identification,characterization and functional prediction of the SRS gene family in sesame(Sesamum indicum L.)

Sesame(Sesamum indicum L.)is an ancient oilseed crop of the Pedaliaceae family with high oil content and potential health benefits.SHI RELATED SEQUENCE(SRS)proteins are the transcription factors(TFs)specific to plants that contain RING-like zinc finger domain and are associated with the regulation of several physiological and biochemical processes.They also play vital roles in plant growth and development such as root formation,leaf development,floral development,hormone biosynthesis,signal transduction,and biotic and abiotic stress responses.Nevertheless,the SRS gene family was not reported in sesame yet.In this study,identification,molecular characterization,phylogenetic relationship,cis-acting regulatory elements,protein-protein interaction,syntenic relationship,duplication events and expression pattern of SRS genes were analyzed in S.indicum.We identified total six SiSRS genes on seven different linkage groups in the S.indicum genome by comparing with the other species,including the model plant Arabidopsis thaliana.The SiSRS genes showed variation in their structure like2–5 exons and 1–4 introns.Like other species,SiSRS proteins also contained‘RING-like zinc finger'and‘LRP1'domains.Then,the SiSRS genes were clustered into subclasses via phylogenetic analysis with proteins of S.indicum,A.thaliana,and some other plant species.The cis-acting regulatory elements analysis revealed that the promoter region of SiSRS4(SIN_1011561)showed the highest 13 and 16 elements for light-and phytohormone-responses whereas,SiSRS1(SIN_1015187)showed the highest 15 elements for stress-response.The ABREs,or ABA-responsive elements,were found in a maximum of 8 copies in the SiSRS3(SIN 1009100).Moreover,the available RNA-seq based expression of SiSRS genes revealed variation in expression patterns between stress-treated and non-treated samples,especially in drought and salinity conditions in.S.indicum.Two SiSRS genes like SiSRS1(SIN_1015187)and SiSRS5(SIN_1021065),also exhibited variable expression patterns between control vs PEG-treated sesame root samples and three SiSRS genes,including SiSRS1(SIN_1015187),SiSRS2(SIN_1003328)and SiSRS5(SIN_1021065)were responsive to salinity treatments.The present outcomes will encourage more research into the gene expression and functionality analysis of SiSRS genes in S.indicum and other related species.

Development of in situ characterization techniques in molecular beam epitaxy

Ex situ characterization techniques in molecular beam epitaxy(MBE)have inherent limitations,such as being prone to sample contamination and unstable surfaces during sample transfer from the MBE chamber.In recent years,the need for improved accuracy and reliability in measurement has driven the increasing adoption of in situ characterization techniques.These techniques,such as reflection high-energy electron diffraction,scanning tunneling microscopy,and X-ray photoelectron spectroscopy,allow direct observation of film growth processes in real time without exposing the sample to air,hence offering insights into the growth mechanisms of epitaxial films with controlled properties.By combining multiple in situ characterization techniques with MBE,researchers can better understand film growth processes,realizing novel materials with customized properties and extensive applications.This review aims to overview the benefits and achievements of in situ characterization techniques in MBE and their applications for material science research.In addition,through further analysis of these techniques regarding their challenges and potential solutions,particularly highlighting the assistance of machine learning to correlate in situ characterization with other material information,we hope to provide a guideline for future efforts in the development of novel monitoring and control schemes for MBE growth processes with improved material properties.

Physicochemical and Biochemical Characterization, Total Phenolic and Energy Value from Bulbs of Different Onion (Allium cepa L.) Varieties in Senegal

The purpose of this study is to investigate the physicochemical properties of some local varieties of onion (Allium cepa L.) and compare them with an imported variety, all collected in May 2021. Proteins, reducing sugars, lipids, and polyphenol content were estimated according to the AFNOR standardized methods. The determination of calcium, magnesium, iron, sodium, potassium and phosphorus was performed by atomic absorption spectrophotometer coupled with a CCD detector. The results highlighted an average acidity of 0.377% ± 0.002% lower than the value of the imported variety which is 0.520% ± 0.001%. Local varieties have a pH ranging from 6.35 ± 0.003 to 6.42 ± 0.004, while the variety has a pH of 6.36 ± 0.003. The ash and dry matter contents vary respectively from 4.788% ± 0.004% to 8.253% ± 0.003% and 7.945% ± 0.021% to 11.945% ± 0.007% for the local varieties. Moreover, the imported one has ash and dry matter contents of 5.175% ± 0.007% and 10.035% ± 0.021% respectively. The results show that the protein, reducing sugar and lipid contents in the local onion varieties vary respectively from 2.815 ± 0.000 to 15.634 ± 0.001 g·100 g-1;4.691 ± 0.001 to 12.596 ± 0.002 g·100 g-1 and 0.006 ± 0.001 to 0.050 ± 0.057 g·100 g-1. Furthermore, the imported variety has a protein, reducing sugar and lipid content of 5.649 ± 0.002;8.565 ± 0.002 g·100 g-1 and 0.011 ± 0.010 g·100 g-1 respectively. The maximum levels of total polyphenols are obtained in the imported variety, Bellani and Gandiol, respectively 9.973 ± 0.001, 4.535 ± 0.002, and 3.425 ± 0.006 mg EAG/g of dry matter. The local varieties have a significant calorific intake of between 35.451 ± 0.001 and 112.980 ± 0.003 kcal·100 g-1 compared to the imported one with an energy value of 56.953 ± 0.001 kcal·100 g-1 of dry matter. The bulbs of different onion varieties studied have a fairly high content of mineral elements. The potassium content of local varieties is between 502.16 ± 0.06 mg·100 g-1 and 582.77 ± 0.04 mg·100 g-1 while the imported variety has a content of 536.62 ± 1.30 mg·100 g-1. They note that the local varieties have a better calcium content (249.75 ± 0.07 to 434.20 ± 0.57 mg·100 g-1) and magnesium (142.15 ± 0.07 to 162.60 ± 0.42 mg·100 g-1) than the imported variety (229.58 ± 0.04 mg·100 g-1) except for the varieties White Grano (228.29 ± 0.01 mg·100 g-1) and Rouge Amposta (117.00 ± 0.42 mg·100 g-1) respectively. These results reveal that Gandiol, Dayo and Orient F1 are nutritionally found better due to their higher antioxidant property, proteins, carbohydrates, and reducing sugar and should be included in diets to supplement our daily allowance needed by the body.

Characterization of Wastewater in School Environments for an Ecological Treatment Solution: A Case Study of Ndiebene Gandiol 1 School

The study conducted at Ndiebene Gandiol 1 school in Senegal has unveiled serious environmental and public health challenges. The wastewater analysis revealed high levels of Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and fecal coliforms, signaling potential risks to the well-being of students and staff. This situation mirrors a wider issue in rural educational settings, where inadequate sanitation persists. Intensive wastewater treatment options are known for their effectiveness against high pollutant loads but are resource-intensive in both energy and cost. Conversely, extensive treatment systems, while requiring more land, provide a sustainable alternative by harnessing natural processes for pollutant removal. The research suggests a hybrid treatment approach could serve the school’s needs, balancing the robust capabilities of intensive methods with the ecological benefits of extensive systems. Such a solution would need to be tailored to the specific environmental, financial, and logistical context of the school, based on comprehensive feasibility studies and stakeholder engagement. This study’s findings underscore the urgency of addressing sanitation in schools, as it is intrinsically linked to the health and academic success of students. Quick, effective, and long-term strategies are vital to secure a healthier and more prosperous future for the youth. With proper implementation, the school can transform its sanitation facilities, setting a precedent for rural educational institutions in Senegal and similar contexts globally.

First-principles study on stability and superconductivity of ternary hydride LaYH_(x)(x=2,3,6 and 8)

Recent studies have shown that the La-and Y-hydrides can exhibit significant superconducting properties under high pressures.In this paper,we investigate the stability,electronic and superconducting properties of LaYH_(x)(x=2,3,6 and 8)under 0-200 GPa.It is found that LaYH_(2) stabilizes in the C2/m phase at ambient pressure,and transforms to the Pmmn phase at 67 GPa.LaYH_(3) stabilizes in the C2/m phase at ambient pressure,and undergoes phase transitions of C2/m→P2_(1)/m→R3m at 12 GPa and 87 GPa,respectively.LaYH_(6) stabilizes in the P4_32_12 phase at ambient pressure,and undergoes phase transitions of P4_(3)2_(1)2→P4/mmm→Cmcm at 28 GPa and 79 GPa,respectively.LaYH_(8) stabilizes in the Imma phase at 60 GPa and transforms to the P4/mmm phase at 117 GPa.Calculations of the electronic band structures show that the P4/mmm-LaYH_(8) and all phases of LaYH_(2) and LaYH_(3) exhibit metallic character.For the metallic phases,we then study their superconducting properties.The calculated superconducting transition temperatures(T_c)are 0.47 K for C2/m-LaYH_(2) at 0 GPa,0 K for C2/m-LaYH_(3) at 0 GPa,and 55.51 K for P4/mmm-LaYH_(8) at 50 GPa.

Characterization and Assessment of the Quality of the Water and Sediments of the Islands (Moudou and Birguime) of Lake Fitri in Chad and Confirmation of the Strains Isolated by the PCR Method

The problem of access to quality water is a major challenge, as it has a major impact on the socio-economic conditions of people in developing countries. The water from the islands of Lake Fitri is one of the main sources of drinking water for the population. The aim of this study is to characterise and assess the quality of the water and sediment from the islands (Moudou and Birguime) of Lake Fitri, and to confirm the strains isolated using the PCR method. A total of fifty (50) samples of water and fifty (50) sediments from the islands of Lake Fitri were analyzed. Standard methods of microbiological and biochemical analysis of water and sediments were used. Isolated Enterobacteriaceae strains were characterized by API 20 E and API Staph galleries and Salmonella was confirmed by PCR method. Antibiotic resistance was determined using a technique recommended by the antibiogram committee of the French microbiology society (CA-SFM, 2019). The microbiological results for the water showed an abundance of total aerobic mesophilic flora (TAMF) (4.31 × 106 ± 8.05 × 105 and 5.29 × 106 ± 2.55 × 105) on the Birguime and Moudou islands successively. The microbiological results for the sediment from Birguime and Moudou islands showed an abundance of thermotolerant coliforms (E. coli) (2.05 × 105 ± 5.43 × 104 and 2.27 × 105 ± 3.49 × 104) alternately. The results obtained after incubation of the biochemical tests by the API 20E, API Staph gallery and their numerical profile proposed by the Api software confirmed the contamination. The antibiogram results showed the emergence of certain resistances to the antibiotics Tobramycin, Flucytosine, Amikacin and Teicoplani. The PCR results for Salmonella spp strains were confirmed. As a result, strict monitoring of the water on the various islands of Lake Fitri must be carried out throughout the annual cycle, by specialized personnel, to ensure proper bio-monitoring of these ecosystems.

Physical and Chemical Characterizations of Rubber Latex Cup Bottom Oil

Rubber latex is an important economic resource. However, the residues from its harvesting are thrown away, even though they contain lipids that can be recycled. This recovery of the residues from the bottom of the cup requires first and foremost their characterization. The aim of this study is therefore to determine the main physical and chemical characteristics of rubber latex cup bottom oil. Oil’s physical parameters determination shows that it has a density of 951 kg∙m−3, a kinematic viscosity of 48.57 cSt and a water content of 0.0845%. Chemical parameters, meanwhile, indicate that this cup bottom residue has a fat content of 95.96%, an acid number of 2.805 mg KOH/g and an iodine number of 92.42 g I2/100g. Therefore, rubber latex cup bottom oil can be used in the formulation of biofuels, biolubricants, paints, varnishes, alkyd resins, polishing oils, soaps, and insecticides.

Preparation and characterization of pH-responsive metal-polyphenol structure coated nanoparticles

In this paper,tannic acid(TA)and Fe~(3+)were added to form a layer of metal-polyphenol network structure on the surface of the nanoparticles which were fabricated by zein and carbon quantum dots(CQDs)encapsulating phlorotannins(PTN).pH-Responsive nanoparticles were prepared successfully(zein-PTN-CQDs-Fe-~Ⅲ).Further,the formation of composite nanoparticles was confirmed by a series of characterization methods.The zeta-potential and Fourier transform infrared spectroscopy data proved that electrostatic interaction and hydrogen bonding are dominant forces to form nanoparticles.The encapsulation efficiency(EE)revealed that metal-polyphenol network structure could improve the EE of PTN.Thermogravimetric analysis and differential scanning calorimetry experiment indicated the thermal stability of zein-PTN-CQDs-Fe~Ⅲnanoparticles increased because of metal-polyphenol network structure.The pH-responsive nanoparticles greatly increased the release rate of active substances and achieved targeted release.

The growth ofβphase in Mg-Gd-Y-Ni alloy by experimental and first-principles study

The paper reports on the atomic investigation aboutβphase in Mg_(96)Gd_(2)Y_(1)Ni_(1) alloy by using the first-principles study and the high-angle annular dark-field scanning transmission electron microscope(HAADF-STEM)corrected by atomic Cs.By using HAADF-STEM,the rectangularβphases were observed in the underage and peak aging stages in Mg_(96)Gd_(2)Y_(1)Ni_(1) alloy.Theβphase could be precipitated from the previously precipitatedβphase,and theβphase grew in steps when it was precipitated.A special transition structure of three atomic layer thicknesses was first observed at the edge of theβphase and the structure of this interface is probably as theβ/Mg_(1) interface for the analysis of thermodynamic characterization and electronic characterization.Theβ'phase and theβ_(H) structure were precipitated only at the edge of the length directions of theβphase.Theβ'phase continues to grow into aβphase directly without the formation ofβ_(1) phase,resulting in an increase in the length of theβphase,which is discovered for the first time.

Phenotypic Characterization and QTL/Gene Identification for Internode Number and Length Related Traits in Maize

Internode number and length are the foundation to constitute plant height, ear height and the above-ground spatial structure of maize plant. In this study, segregating populations were constructed between EHel with extremely low ear height and B73. Through the SNP-based genotyping and phenotypic characterization, 13 QTL distributed on the chromosomes (Chrs) of Chr1, Chr2, Chr5-Chr8 were detected for four traits of internode no. above ear (INa), average internode length above ear (ILaa), internode no. below ear (INb), and average internode length below ear (ILab). Phenotypic variation explained (PVE) by a single QTL ranged from 6.82% (qILab2-2) to 12.99% (qILaa5). Zm00001d016823 within the physical region of qILaa5, the major QTL for ILaa with the largest PVE was determined as the candidate through the genomic annotation and sequence alignment between EHel and B73. Product of Zm00001d016823 was annotated as a WEB family protein homogenous to At1g75720. qRT-PCR assay showed that Zm00001d016823 highly expressed within the tissue of internode, exhibiting statistically higher expression levels among internodes of IN4 to IN7 in EHel than those in B73 (P Zm00001d016823 might provide novel insight into molecular mechanism beyond phytohormones controlling internode development in maize.

Mechanical heterogeneity characterization of coal materials based on nano-indentation experiments

To investigate the complex macro-mechanical properties of coal from a micro-mechanical perspective,we have conducted a series of micro-mechanical experiments on coal using a nano-indentation instrument.These experiments were conducted under both dynamic and static loading conditions,allowing us to gather the micro-mechanical parameters of coal for further analysis of its micro-mechanical heterogeneity using the box counting statistical method and the Weibull model.The research findings indicate that the load–displacement curves of the coal mass under the two different loading modes exhibit noticeable discreteness.This can be attributed to the stress concentration phenomenon caused by variations in the mechanical properties of the micro-units during the loading process of the coal mass.Consequently,there are significant fluctuations in the micro-mechanical parameters of the coal mass.Moreover,the mechanical heterogeneity of the coal at the nanoscale was confirmed based on the calculation results of the standard deviation coefficient and Weibull modulus of the coal body’s micromechanical parameters.These results reveal the influence of microstructural defects and minerals on the uniformity of the stress field distribution within the loaded coal body,as well as on the ductility characteristics of the micro-defect structure.Furthermore,there is a pronounced heterogeneity in the micromechanical parameters.Furthermore,we have established a relationship between the macro and micro elastic modulus of coal by applying the Mori-Tanaka homogenization method.This relationship holds great significance for revealing the micro-mechanical failure mechanism of coal.

Recent progress about transmission electron microscopy characterizations on lithium-ion batteries

With the rapid development of portable electronics,new energy vehicles,and smart grids,ion batteries are becoming one of the most widely used energy storage devices,while the safety concern of ion batteries has always been an urgent problem to be solved.To develop a safety-guaranteed battery,the characterization of the internal structure is indispensable,where electron microscopy plays a crucial role.Based on this,this paper summarizes the application of transmission electron microscopy(TEM)in battery safety,further concludes and analyzes the aspects of dendrite growth and solid electrolyte interface(SEI)formation that affect the safety of ion batteries,and emphasizes the importance of electron microscopy in battery safety research and the potential of these techniques to promote the future development of this field.These advanced electron microscopy techniques and their prospects are also discussed.

Machine learning in metal-ion battery research: Advancing material prediction, characterization, and status evaluation

Metal-ion batteries(MIBs),including alkali metal-ion(Li^(+),Na^(+),and K^(3)),multi-valent metal-ion(Zn^(2+),Mg^(2+),and Al^(3+)),metal-air,and metal-sulfur batteries,play an indispensable role in electrochemical energy storage.However,the performance of MIBs is significantly influenced by numerous variables,resulting in multi-dimensional and long-term challenges in the field of battery research and performance enhancement.Machine learning(ML),with its capability to solve intricate tasks and perform robust data processing,is now catalyzing a revolutionary transformation in the development of MIB materials and devices.In this review,we summarize the utilization of ML algorithms that have expedited research on MIBs over the past five years.We present an extensive overview of existing algorithms,elucidating their details,advantages,and limitations in various applications,which encompass electrode screening,material property prediction,electrolyte formulation design,electrode material characterization,manufacturing parameter optimization,and real-time battery status monitoring.Finally,we propose potential solutions and future directions for the application of ML in advancing MIB development.

Structural characterization and anti-inflammatory activities of novel polysaccharides obtained from Pleurotus eryngii

Natural polysaccharides named PEP-0.1-1,PEP-0-1 and PEP-0-2 from edible mushroom species Pleurotus eryngii were obtained in the present study.Results showed that molecular weights of these polysaccharides were 3235,2041 and 23933 Da,respectively.Further,structural characterization revealed that PEP-0.1-1 had a→4-α-D-Glcp-1→backbone and contained→4)-α-D-Glcp and→4)-β-D-Glcp reducing end groups.PEP-0-1 backbone contained→4-α-D-Glcp-1→and→6-α-3-O-Me-D-Galp-1→,and the side chains containedα-D-Glcp,β-D-Manp-1→andα-D-Glcp-3→.However,PEP-0-2 backbone consisted of→4-α-DGlcp-1→and→6-α-3-O-Me-D-Galp-(1→6)-α-D-Galp-1→while the side chains containedα-D-Glcp andβ-D-Manp-1→.Biological activity analysis was then carried out and found that all these polysaccharides could significantly suppress the relative mRNA expression of toll-like receptor 4,nitric oxide(NO),tumor necrosis factor-α,interleukin(IL)-1βand IL-6 in lipopolysaccharide(LPS)-induced inflammation of RAW264.7 cells,as well as the over secretion of the above cell cytokines.Moreover,Western blotting analysis revealed that all these purified fractions displayed significant inhibition effects on the expression of c-Jun N-terminal kinases protein induced by LPS in mitogen activated protein kinase pathway,along with the relieving on the inhibition effect of LPS on IκB-αprotein expression.In summary,the information generated by the present study could provide a theoretical basis for the exploration of novel healthy food materials from edible mushroom with antiinflammation activities.

Characterization and identification towards dynamic-based electrical modeling of lithium-ion batteries

Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithms in battery management systems is usually based on battery models,which interpret crucial battery dynamics through the utilization of mathematical functions.Therefore,the investigation of battery dynamics with the purpose of battery system identification has garnered considerable attention in the realm of battery research.Characterization methods in terms of linear and nonlinear response of lithium-ion batteries have emerged as a prominent area of study in this field.This review has undertaken an analysis and discussion of characterization methods,with a particular focus on the motivation of battery system identification.Specifically,this work encompasses the incorporation of frequency domain nonlinear characterization methods and dynamics-based battery electrical models.The aim of this study is to establish a connection between the characterization and identification of battery systems for researchers and engineers specialized in the field of batteries,with the intention of promoting the advancement of efficient battery technology for real-world applications.

First-principles study on the diffusion behavior of Cs and I in Cr coating

Cs and I can migrate through fuel-cladding interfaces and accelerate the cladding corrosion process induced by the fuel-cladding chemical interaction.Cr coating has emerged as an important candidate for mitigating this chemical interaction.In this study,first-principles calculations were employed to investigate the diffusion behavior of Cs and I in the Cr bulk and grain boundaries to reveal the microscopic interaction mitigation mechanisms at the fuel-cladding interface.The interaction between these two fission products and the Cr coating were studied systematically,and the Cs and I temperature-dependent diffusion coefficients in Cr were obtained using Bocquet’s oversized solute-atom model and Le Claire’s nine-frequency model,respectively.The results showed that the Cs and I migration barriers were significantly lower than that of Cr,and the Cs and I diffusion coefficients were more than three orders of magnitude larger than the Cr self-diffusion coefficient within the temperature range of Generation-IV fast reactors(below 1000 K),demonstrating the strong penetration ability of Cs and I.Furthermore,Cs and I are more likely to diffuse along the grain boundary because of the generally low migration barriers,indicating that the grain boundary serves as a fast diffusion channel for Cs and I.

A review of in-situ high-temperature characterizations for understanding the processes in metallurgical engineering

For the rational manipulation of the production quality of high-temperature metallurgical engineering,there are many challenges in understanding the processes involved because of the black box chemical/electrochemical reactors.To overcome this issue,various in-situ characterization methods have been recently developed to analyze the interactions between the composition,microstructure,and solid-liquid interface of high-temperature electrochemical electrodes and molten salts.In this review,recent progress of in-situ hightemperature characterization techniques is discussed to summarize the advances in understanding the processes in metallurgical engineering.In-situ high-temperature technologies and analytical methods mainly include synchrotron X-ray diffraction(s-XRD),laser scanning confocal microscopy,and X-ray computed microtomography(X-rayμ-CT),which are important platforms for analyzing the structure and morphology of the electrodes to reveal the complexity and variability of their interfaces.In addition,laser-induced breakdown spectroscopy,high-temperature Raman spectroscopy,and ultraviolet-visible absorption spectroscopy provide microscale characterizations of the composition and structure of molten salts.More importantly,the combination of X-rayμ-CT and s-XRD techniques enables the investigation of the chemical reaction mechanisms at the two-phase interface.Therefore,these in-situ methods are essential for analyzing the chemical/electrochemical kinetics of high-temperature reaction processes and establishing the theoretical principles for the efficient and stable operation of chemical/electrochemical metallurgical processes.