FITTING CORRECTION METHOD OF RING ARTIFACTS FOR RECONSTRUCTING CONE-BEAM CT IMAGES

In high-resolution cone-beam computed tomography （CBCT） using the flat-panel detector, imperfect or defect detector elements cause ring artifacts due to the none-uniformity of their X-ray response. They often disturb the image quality. A dedicated fitting correction method for high-resolution micro-CT is presented. The method converts each elementary X-ray response curve to an average one, and eliminates response inconsistency among pixels. Other factors of the method are discussed, such as the correction factor variability by different sampling frames and nonlinear factors over the whole spectrum. Results show that the noise and artifacts are both reduced in reconstructed images

Solving single-frequency phase ambiguity using parameter weights fitting and constrained equation ambiguity resolution methods

Based on the structural characteristics of the double-differenced normal equation, a new method was proposed to resolve the ambiguity float solution through a selection of parameter weights to construct an appropriate regularized matrix, and a singular decomposition method was used to generate regularization parameters. Numerical test results suggest that the regularized ambiguity float solution is more stable and reliable than the least-squares float solution. The mean square error matrix of the new method possesses a lower correlation than the variancecovariance matrix of the least-squares estimation. The size of the ambiguity search space is reduced and the search efficiency is improved. The success rate of the integer ambiguity searching process is improved significantly when the ambiguity resolution by using constraint equation method is used to determine the correct ambiguity integervector. The ambiguity resolution by using constraint equation method requires an initial input of the ambiguity float solution candidates which are obtained from the LAMBDA method in the new method. In addition, the observation time required to fix reliable integer ambiguities can he significantly reduced.

A Microcomputer Fitted Method for Determination of the True ODF of Hexagonal Materials according to the Maximum-Entropy Estimate

A method which is especially suitable for microcomputer calculation of the true orientation distribution function (ODF) according to the maximum-entropy estimate is proposed for hexagonal system polycrystalline materials with physical symmetry.The resultant computational software system has been also designed and first carried out in a microcomputer PANAFACOM-U1200 being on line with the X-ray diffractometer D/max-3A.The simu- lated calculation shows that the method is concisely pragmatic and easily popularized,while the results obtained are trust worthy.

Multiple Suppression Using T-A Dual Polynomial Fitting Method

Principles of polynomial fitting zero offset profile are introduced, and a new polynomial fitting method, tbe time-amplitude dual fitting method, is developed. The method can be used to purify seismic waves and suppress multiples. The effect of suppressing multiples is compared with other multiple suppression methods.

Combined Application of Wide-Field Electromagnetic Method and Flow Field Fitting Method for High-Resolution Exploration： A Case Study of the Anjialing No. 1 Coal Mine

The Anjialing No. 1 Coal Mine in Shanxi Province, China, contains a complicated old goaf and an unknown water distribution that hold high potential for serious water hazards. Due to poor detection resolution, previous attempts have failed to determine the scope of the old goal and the water distribution in the mine by separate use of various exploration methods such as seismic method, direct current resistivity, audio magnetotellurics, controlled-source audio-frequency magnetotellurics, and transient electromag-netics. To solve this difficult problem, a combination of the wide-field electromagnetic method and the flow field fitting method with three-dimensional resistivity data inversion was applied to determine the precise scope of the goal and the locations where water is present, and to identify the hydraulic con- nection between the water layers so as to provide reliable technical support for safe coal production. Reasonable results were achieved, with all these goals being met. As a result, a mining area of nearly 4 km^2 has been released for operation.

Fitting method of pseudo-polynomial for solving nonlinear parametric adjustment

The optimal condition and its geometrical characters of the least square adjustment were proposed. Then the relation between the transformed surface and least squares was discussed. Based on the above, a non iterative method, called the fitting method of pseudo polynomial, was derived in detail. The final least squares solution can be determined with sufficient accuracy in a single step and is not attained by moving the initial point in the view of iteration. The accuracy of the solution relys wholly on the frequency of Taylor’s series. The example verifies the correctness and validness of the method. [

ON CONSTRUCTION OF HIGH ORDER EXPONENTIALLY FITTED METHODS BASED ON PARAMETERIZED RATIONAL APPROXIMATIONS TO exp

By the discussion of the formula and properties of (4,4) parametric form rational approximation to function exp(q), the fourth order derivative one_step exponentially fitted method and the third order derivative hybrid one_step exponentially fitted method are presented, their order p satisfying 6≤p≤8. The necessary and sufficient conditions for the two methods to be A_ stable are given. Finally, for the fourth order derivative method, the error bound and the necessary and sufficient conditions for it to be median are discussed.

Three-Step Predictor-Corrector of Exponential Fitting Method for Nonlinear Schroedinger Equations

We develop the three-step explicit and implicit schemes of exponential fitting methods. We use the three- step explicit exponential fitting scheme to predict an approximation, then use the three-step implicit exponential fitting scheme to correct this prediction. This combination is called the three-step predictor-corrector of exponential fitting method. The three-step predictor-corrector of exponential fitting method is applied to numerically compute the coupled nonlinear Schroedinger equation and the nonlinear Schroedinger equation with varying coefficients. The numerical results show that the scheme is highly accurate.

ADAPTIVE MESHLESS METHOD BASED ON LOCAL FIT TECHNOLOGY

An h-adaptive meshless method is proposed in this paper. The error estimation is based on local fit technology, usually confined to Voronoi Cells. The error is achieved by comparison of the computational results with smoothed ones, which are projected with Taylor series. Voronoi Cells are introduced not only for integration of potential energy but also for guidance of refinement. New nodes are placed within those cells with high estimated error. At the end of the paper, two numerical examples with severe stress gradient are analyzed. Through adaptive analysis accurate results are obtained at critical subdomains, which validates the efficiency of the method.

LEAST-SQUARES METHOD-BASED FEATURE FITTING AND EXTRACTION IN REVERSE ENGINEERING

The main purpose of reverse engineering is to convert discrete data pointsinto piecewise smooth, continuous surface models. Before carrying out model reconstruction it issignificant to extract geometric features because the quality of modeling greatly depends on therepresentation of features. Some fitting techniques of natural quadric surfaces with least-squaresmethod are described. And these techniques can be directly used to extract quadric surfaces featuresduring the process of segmentation for point cloud.

Exponentially-Fitted 2-Step Simpson’s Method for Oscillatory/Periodic Problems

Following a six-step flow chart, exponentially-fitted variant of the 2-step Simpson’s method suitable for solving ordinary differential equations with periodic/oscillatory behaviour is constructed. The qualitative properties of the constructed methods are also investigated. Numerical experiments on standard problems confirming the theoretical expectations regarding the constructed methods compared with other existing standard methods are also presented. Our results unify and improve the existing classical 2-step Simpson’s method.

用FIT方法设计的宽频带双脊圆喇叭天线

采用有限积分技术(FIT)设计了一种1GHz～6GHz的宽频带双脊圆喇叭天线。调整天线各部分的结构尺寸,使天线的驻波比达到最小值,计算了它的增益、方向图等天线参数,并将它们和广泛用于电磁兼容测试的宽频带双脊角锥喇叭天线的电参数进行了对照,结果表明该天线比双脊角锥喇叭天线在吸波材料拱形法测试当中有更大的优越性。对制作出的天线的电参数实测,结果和计算结果基本吻合。

D4SCROSSFIT课程的调查与分析

CROSSFIT的英文原意是全面强健,包括体能、力量、爆发力、速度、控制力、柔韧性等。该章采用了文献资料法、问卷调查法、访谈法等方法,通过对CROSSFIT的教练员情况和教学内容进行了全面调查,并且对CROSSFIT核心技术内容做了较为详尽的分析,得出结论如下:(1)由于CROSSFIT的专业要求,对教练员的力量和体能等的要求比较高,所以教练员呈现年轻化,男性教练员的比例大于女性,教练员的教龄在3年以内,目前CROSSFIT教练员以非体育专业为主。(2)CROSSFIT举重占课堂比例最多,是因为举重项目相对新颖,可以吸引消费者的目光。(3)普通会员的需求与专业举重、体操、田径运动员相比,区别在于训练的强度而并非种类。

基于Spectral-Fit法的星载SAR方位多波束方位向非均匀采样的处理

介绍了方位多波束技术的基本原理,指出了其在星载情况下必然会产生方位向非均匀采样,而非均匀采会在雷达图像中产生虚假目标。SpectralFit法的目的是从原始信号的非均匀样本中得到该信号的真实频谱,为了消除位向非均匀采样的影响,文中将SpectralFit法与方位多波束SAR的成像算法结合,对方位向非均匀采样的目标回波信进行处理。最后通过计算机仿真验证了该处理的有效性。

Improvement of scattering correction for in situ coastal and inland water absorption measurement using exponential fitting approach

The absorption coefficient of water is an important bio-optical parameter for water optics and water color remote sensing. However, scattering correction is essential to obtain accurate absorption coefficient values in situ using the nine-wavelength absorption and attenuation meter AC9. Establishing the correction always fails in Case 2 water when the correction assumes zero absorption in the near-infrared(NIR) region and underestimates the absorption coefficient in the red region, which affect processes such as semi-analytical remote sensing inversion. In this study, the scattering contribution was evaluated by an exponential fitting approach using AC9 measurements at seven wavelengths(412, 440, 488, 510, 532, 555, and 715 nm) and by applying scattering correction. The correction was applied to representative in situ data of moderately turbid coastal water, highly turbid coastal water, eutrophic inland water, and turbid inland water. The results suggest that the absorption levels in the red and NIR regions are significantly higher than those obtained using standard scattering error correction procedures. Knowledge of the deviation between this method and the commonly used scattering correction methods will facilitate the evaluation of the effect on satellite remote sensing of water constituents and general optical research using different scatteringcorrection methods.

Methods of de-noising the low frequency electromagnetic data

The quality of the low frequency electromagnetic data is affected by the spike and the trend noises.Failure in removal of the spikes and the trends reduces the credibility of data explanation.Based on the analyses of the causes and characteristics of these noises,this paper presents the results of a preset statistics stacking method(PSSM)and a piecewise linear fitting method(PLFM)in de-noising the spikes and trends,respectively.The magnitudes of the spikes are either higher or lower than the normal values,which leads to distortion of the useful signal.Comparisons have been performed in removing of the spikes among the average,the statistics and the PSSM methods,and the results indicate that only the PSSM can remove the spikes successfully.On the other hand,the spectrums of the linear and nonlinear trends mainly lie in the low frequency band and can change the calculated resistivity significantly.No influence of the trends is observed when the frequency is higher than a certain threshold value.The PLSM can remove effectively both the linear and nonlinear trends with errors around 1% in the power spectrum.The proposed methods present an effective way for de-noising the spike and the trend noises in the low frequency electromagnetic data,and establish a research basis for de-noising the low frequency noises.

Soller slits automatic focusing method for multi-element fluorescence detector

In X-ray absorption fine structure(XAFS) experiments,Soller slits are widely used as filter devices in order to improve the signal to noise ratio.Performing high accuracy manual focusing operations is a time-consuming process;therefore,this work introduces an automatic focusing method for Soller slits in multi-element fluorescence detectors.This method establishes a relation model between the fluorescence intensity distribution and the coordinates of the fluorescence excitation point.According to this relation model,the actual coordinates of the fluorescence excitation point can be deduced from the detected fluorescence intensity distribution and used in focusing operations.This method has proven to be feasible in an XAFS experiment at the BL14W1 beamline of the Shanghai Synchrotron Radiation Facility.

A Modeling Method for Transformer Windings Under VFTO Based on S-parameters

To study the Very Fast Transient Over-voltage (VFTO) distribution in transformer windings in gas insulated substation (GIS), a systematic methodology based on S-parameters is presented for establishing high-frequency model of transformer windings. Firstly, voltage transfer functions are derived from S-parameters which are calculated or measured from transformer windings. Secondly, voltage transfer functions are fitted with rational functions by the vector fitting method and then the rational transfer functions are order-reduced by optimal Pade-approximation algorithm. Lastly, the resultant voltage transfer functions are synthesized by network technology. Computational results are consistent with simulation results of Electromagnetic Transient Program (EMTP) and confirm the feasibility and validity of proposed methodology.

A Numerical Method for Nonlinear Singularly Perturbed Multi-Point Boundary Value Problem

We consider a uniform finite difference method for nonlinear singularly perturbed multi-point boundary value problem on Shishkin mesh. The problem is discretized using integral identities, interpolating quadrature rules, exponential basis functions and remainder terms in integral form. We show that this method is the first order convergent in the discrete maximum norm for original problem (independent of the perturbation parameter ε). To illustrate the theoretical results, we solve test problem and we also give the error distributions in the solution in Table 1 and Figures 1-3.